Turning Device

Rud 16t

Condition: reconditioned (used), Year of construction: 2002, Multicomponent Arburg IMM (Horizontal & Vertical) Clamping force 100 tons. Year 2002. Machine will be delivered RE-Conditioned (full checked tested and operate) Ask us for our service of Start Up with Warranty of working condition. Technical details CLAMPING FORCE 1000 kN SCREW DIAMETER Horizontal bimetalic 25mm SCREW DIAMETER Vertical 18mm INJECTION PRESSURE 2500 BAR INJECTION VOLUMEN horizontal 54gr Hnsdpfx Asp Audqsd Rsl INJECTION VOLUMEN Vertical 20gr DISTANCE BETWEEN TIE BARS (h x v) 420x420mm MIN. MOULD HIGHT 250mm DAYLIGHT MAX 750mm WORKING HOURS 79.115 YEAR OF BUILDING 2002

Condition: new, *TECHNICAL SPECIFICATION: Heating power hot circuit: 48 kW heating capacity cold circuit: 12 kW cooling capacity hot circuit: 42 kW cooling capacity cold circuit: 270 kW medium: water up to 200°C Max. external volume: 10 ltr at 200°C Max. flow rate: up to 200 l/min  max. delivery pressure: up to 6,5 bar motor power: 5,5 kW Dimension LxWxH: 1.395 x 753 x 1.180 mm Weight approx. 580 kg Hnedpfx Aog Ey Ufjd Rel *HIGHLIGHTS EQUIPMENT: -regulation and control via SPS with touch screen -heating via stainless steel tubular heating elements made of Incolloy -Heating control via solid-state relay -control box IP54 externally ventilated2 -electrical wiring on terminal blocks -pot. free input for signal for cold/warm changeover (front door) - Pot.-free contact for collective alarm on 3-pin plug-in connector (front door) (front door) -temperature control unit with heating and cooling circuit, for connection of a valve station for quick changeover between hot and cold circuit -temperature controlled feed of the return water -level monitoring with automatic level compensation -dirt filter in the cooling water supply and in the return of the circulation system -Separate automatic filling with strainer -Flow measurement in differential pressure principle in both circuits -monitoring of the heating rod surface by temperature sensors -System pressure control, necessary compressed air connection: 6 to 8 bar -booster pump type DS 360 for water make-up -corrosion-resistant components (VA, MS) -unit mounted on rollers and ready for connection *OPTIONS: -System EcoTemp for intermittent operation -connection for ext temperature sensor PT100 or type J/K -Remote touch screen with 15 m cable Visit our website for more details or for other performance classes. *This device is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: excellent (used), Year of construction: 2008, operating hours: 58,001 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 25 mm, displacement volume: 59 cm³, injection pressure: 20 bar, mold height (min.): 250 mm, ejector force: 25 N, ejector stroke: 100 mm, overall weight: 3,900 kg, Equipment: documentation/manual, Engel E Max cleanroom machine, year of manufacture 2008, including GEKU SR 500 ST linear robot. The machine has operated for just under 58,000 pump hours in automatic mode. It comes from a reputable producer in the pharmaceutical industry, which means both the machine and the handling system have been subject to very strict maintenance management and are in excellent condition. Hnsdpfxjt A Ufws Ad Rsl

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, 2000 Arburg projector. 130 tons of closing force. The machine is delivered completely reconditioned in our facilities in Heras (Cantabria). New gaskets in the sealing body. We can show it in operation. Technical details CLOSING POWER 1300 kN Hnedpfx Adorxtpdj Rsl PLATE DIMENSIONS 660x840 OPENING STROKE 575mm MAXIMUM DISTANCE BETWEEN PLATES 800/850 DISTANCE BETWEEN COLUMNS 420x420/470x470 SPINDLE 50mm INJECTION VOLUME 353cm3 INJECTION WEIGHT 117 YEAR OF MANUFACTURE 2000 INJECTION PRESSURE 2500bar

Condition: new, Year of construction: 2025, General: -Temperature range max. 150°C for OeL (heat transfer fluid) -robust sheet steel housing -device on rollers Hydraulics: -sealless immersion pump -Qmax. 60 l/min. - Pmax. 3,8 bar -Tank and heater made of stainless steel -Heating capacity 9 kW -Tank capacity ~20 liters -fittings made of brass/stainless steel -manual oil filling -mechanical level control -indirect cooling system (tubular spiral heat exchanger) -cooling capacity ~40.000 kcal/h -manometer -bypass -solenoid valves for cooling Hnodpfx Asddv Itod Rol Electrical and control system: -Electronic PCB control -Solid State Relay -Safety thermostat -failure monitoring -Connection cable with plug Available in approx. 4 weeks!

Condition: excellent (used), Year of construction: 2006, operating hours: 33,108 h, functionality: fully functional, clamping force: 1,300 kN, screw diameter: 25 mm, displacement volume: 79 cm³, injection pressure: 2,398 bar, ejector force: 6,100 N, ejector stroke: 100 mm, opening stroke: 606 mm, plate length: 750 mm, plate width: 850 mm, overall weight: 10,600 kg, Equipment: documentation/manual, Technical Details Manufacturer: Engel Model: V 330H/80V/130 Combi Cleanroom Year of manufacture: 2006 Operating hours: 33,107 h Screw: 25/22 mm Machine weight: 10,600 kg Additional equipment included: GEKU SR 500 ST robot Safety enclosure Rotary table Hnsdot A Ui Aopfx Ad Rel The machine has operated for almost 33,107 hours in automatic mode.

Condition: like new (used), Year of construction: 2019, operating hours: 11,337 h, functionality: fully functional, machine/vehicle number: 234917, clamping force: 1,600 kN, screw diameter: 30 mm, Equipment: documentation/manual, ENGEL eMotion 160 from a cleanroom injection molding production, with only 11,300 operating hours and in like-new condition. Enclosed you will find: • Current photos of the machine • The order confirmation from ENGEL to NYPRO The original new price was approximately €330,000. Hedpfx Aowb Dl Ted Rsnl The sales price is €79,500 including crane. The technical data can be provided upon request and are also listed below in the documents. Included in the price: Dismantling the crane onto two Euro pallets, as well as moving the machine out of the cleanroom and loading onto your truck using a 15-ton forklift. If you are interested or have any questions, please feel free to contact me at any time. The machine is located near Karlsruhe and can be inspected there. Delivery possible within a few days.

Condition: used, Year of construction: 2001, operating hours: 58,764 h, functionality: fully functional, machine/vehicle number: 502748, clamping force: 1,000 kN, screw diameter: 30 mm, clearance between the columns: 420 mm, displacement volume: 144 cm³, injection pressure: 1.905 bar, ejector force: 41 N, ejector stroke: 150 mm, opening stroke: 500 mm, plate length: 590 mm, plate width: 590 mm, installation height: 250 mm, total length: 4,550 mm, total width: 1,450 mm, total height: 2,000 mm, overall weight: 4,800 kg, heating capacity: 9 kW (12.24 HP), pump power: 30,000 W, height adjustment type: hydraulic, stroke length: 150 mm, tool height: 250 mm, tool weight: 700,000 g, Equipment: documentation/manual, Demag ERGOtech Injection Moulding Machine ERGOtech 100-420-200 NC4 Year of manufacture: 2001 Asking price: €8,000.00 – WITHOUT Wittmann peripheral equipment The injection moulding machine is in good condition and ready for operation. For sale is the ERGOtech 100-420-200 NC4 injection moulding machine. Optionally, all corresponding Wittmann peripheral devices can be included at an additional charge. We purchased the Demag ERGOtech in 2020 during our company expansion to fulfill a customer order and equipped it with matching Wittmann peripheral devices. The machine has been serviced on-site by a DEMAG service technician and is free from defects. OPTIONAL: We also offer for sale all associated Wittmann peripheral equipment: Peripheral Equipment from WITTMANN BATTENFELD Deutschland GmbH: Wittmann Tempro Plus D160 – Dual-circuit temperature control unit TEMPRO-PLUS-D-Standard-2-160 DEMONSTRATION UNIT – used, no defects Equipped with: 2 pcs. Reinforced pump TemproPlus D160-1.0kW (2.4A) 60l 1 pc. Ultrasonic flow measurement 140-180° 1 pc. Digital interface 20mA 1 pc. Packaging for temperature control unit Hnedstltvzepfx Ad Rjl Original price: €6,980.00 Sale price: €3,490.00 Wittmann Compact Chiller Coolmax C30 WITTMANN WATER CHILLER SERIES: COOLMAX C30 DEMONSTRATION UNIT – used, no defects Original price: €4,750.00 Sale price: €2,375.00 WITTMANN BATTENFELD Deutschland GmbH Drying and dosing accessories - 1 pc. DRYMAX-PRIMUS: E30-70-M for drying plastic granules - 2 pcs. FEEDMAX-S:3NET for conveying free-flowing plastic granules, hinged lid with integrated collector motor - 1 pc. HOPPER: MT203 machine hopper 203 for mounting a series 200 separator - 1 pc. DOSIMAX: MC 18 dosing unit for free-flowing granulate Condition – NEW – Unused Original price: €8,467.00 Sale price: €4,233.50 All prices are exclusive of the statutory 19% VAT. PLEASE NOTE: The offer does not include relocation or transportation costs for the machine. These services can be offered and organised separately upon request. For further questions, please feel free to contact me at any time.

Condition: good (used), Year of construction: 1998, operating hours: 83,000 h, screw diameter: 50 mm, overall weight: 7,400 kg, Demag 150 tons Auger diameter: 50 mm Impact volume: 399 cc Hjdpfst Dx Hbox Ad Rjnl Shot weight: 360 g Opening path max: 500 mm Mold height min: 250 mm Mold height max: 560 mm (660 with WA) Max. distance between moldboards: 1060 mm (1160 with WA) Mold table size H*V: 750*750 mm Distance between tie bars H*V: 500*500 mm Max. tool weight: 1700 kg

Condition: excellent (used), Year of construction: 2005, clamping force: 1,300 kN, screw diameter: 35 mm, injection pressure: 2,500 bar, injection weight: 127 g, Arburg 470S-1300-350 (170) hybrid with electric screw drive, without hopper General information Product Code: 170 Availability: In Stock Year of production: 2005 Brand: Arburg Technical data Shot Weight: 127 g Clamping Force: 1,300 kN Screw dia: 35 mm Injection pressure: 2500 bar Tie bar distance: 470 x 470 mm Platen size: 650 x 650 mm Mould height min.: 275 mm Type of controls: Selogica Language: German Power: 33,9 kW Workinghours: 85.400 h Weight: 5.100 kg Dimensions: 5 x 1,8 m Hjdpfx Asvt Tn Njd Ronl Hopper: No Core pull: Yes Euromap: Yes Air valve: Yes