Band oven

SAFED WF 450

Year of construction: 2021, condition: like new (used), Continuous belt annealing furnace electrically heated. The unit is equipped with high quality components and is in mint condition. The furnace is pleased to be inspected at any time. The plant is not completely assembled at the moment. For further information we are pleased to be at your disposal. Annealing furnace suitable for annealing of small parts (Steel parts) with cooling zone at the outlet. Throughput capacity: 100 kg/h Ledoha T Ipjpfx Agzjak temperature max.: 1100°C depending on the weight of the piece, the throughput speed of the volume and single- or multi-layer charging. Pouring height max.: 40 mm Throughput height max.: 60 mm Furnace time adjustable: 200-30 mm/min Total length of the plant approx. 11000 mm Total width of the plant approx. 1750 mm Total height of the plant approx. 2320 mm Total heating capacity: 81 kW Heating zones: 3 Heated length: 3000 mm Cooling zone length: 2500 mm belt width: 500 mm Temperature accuracy +/- 2°C Cooling zone fans 2 pcs. Furnace gassing: nitrogen/hydrogen or nitrogen only Offer without charging!

Condition: excellent (used), Brand: KENT Model: KGS-250AHD Type : Tangential Work surface 460x200 mm Longitudinal course 540 mm Cross course 260 mm Distance form center to table 490 mm Max. Weight on the table including magnetic chuck 103 for series 250 kg 150 for series 818 kg Slote in T 14x 1 mm/N Longitudinal table speed 5- 23 m/min Crank cords feed 1 gra 0,02 mm - 1 rev 4 mm Automatic traerse feed per pass 0.1 -5.5 mm Automatic advance 50 Hz- 820 mm /min. - 60Hz 980 mm/min Wheel size 180 x 13 x 31. 75 mm Spindle speed 50 Hz 2850 rpm - 60 Hz 3480 rpm Upright crank 1 gra 0,01 mm - 1 rev 2 mm Automatic feed increment 0,002- 0,02 mm Spindle motor 2 x 2 HP X P Hoist motor NA kg x cm Hydraulic motor pump 1 X 6 HP X P Drain motor 1/8 X 2 HP X P Transverse agace engine 1/5 x 6 HP X P Machine height 1775 mm Machine dimension 3260 x 2460 mm Net weight 1300 kg Laedpfx Agjh Ha Ipezok Gross weight 1500 K

Year of construction: 1992, condition: good (used), 21 rolls, Ø 80 mm Lajdsg Iirnjpfx Agzjk strip width: 500 - 1.650 mm strip thickness: 1 - 5 mm

Condition: good (used), Approx. 30 running meters Schaefer R3000 shelf rack Manufacturer: Schaefer R3000 as new, see pictures Over 300 meters available upright, galvanized, height 2,5 m, depth 40 cm Shelves, galvanized, 100 kg load/ shelf, width ca.100 cm Negotiable price: € 2.890,00 net ex stock Offer consists of: 31 pcs. uprights or frames, 2,5 m, galvanized 90 pcs. Shelves, 100 kg load per shelf, galvanized 10 pcs. cross bracing for stiffening. 3 levels per bay (of course more levels are possible with extra charge). Laedecfhx Tjpfx Agzek Heights 2,3m, 2,5m or 3m available. Goods are in stock. Constantly over 3000 running meters of pallet racks from numerous manufacturers in stock. Transport and assembly available on request. More info on request. (Changes and errors in the technical data, specifications and prices and prices and subject to prior sale! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous articles from various areas. To get to our site, please click on our logo! broom-clean business clearances company dissolutions Fast- flexible - ready to hit! We clear and dispose also for liquidators. Write us with some keywords, we will contact you immediately.

Condition: reconditioned (used), Year of construction: 1983, Power: 2.000 kN Frequency: 60 rpm Stroke, adjustable: 20 - 120 mm Laedpfx Agegpxc Sezek Daylight: 450mm (max. stroke up) Ram adjustement: 100mm Size of bolster: 850 x 810mm Opening in bolster: 00 x 50mm Ram area: 750 x 810mm Motor power: 22 kW equipped by: - 1pc. con rod - 6pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - manuel stroke adjustment - pneumatic ram balancing cylinder - anti vibration machine feet

Condition: used, Year of construction: 1980, machine/vehicle number: A-07/471A, sheet width - max.:130 mm straightening roll diameter:40 mm :5 :2+2 sheet thickness - min.:0,4 mm Laodscxxx Repfx Agzjk sheet thickness - max.:3,5 mm weight:0,4 t dimensions of the machine ca.:0,6x0,65x1,15 m with integrated, stepless adjustable Vari-drive, reversing, operating-mode switch for manual and automatic operation, introduction roller cage, position indicator of straightening rolls via analogue display, adjustment of straightening rollers via hand wheels, automatic swivel arm control, very good condition

Condition: excellent (used), Grinding range 650 x 300 x 550 mm Table size 650 x 250 mm Automatic dresser MARCELS MASCHINEN CH Ledpforvhirox Agzjak

Year of construction: 1971, condition: good (used), decoiler - expansion mandrel with coil lifting table Lajdpfx Agsd Ha E Sszsk strip width: 1.200 mm strip thickness: 0,3 - 5 mm coil weight: 10 t mandrel Ø: 508 mm

Condition: reconditioned (used), Year of construction: 2009, x-travel 3.000 mm Laodpfx Aevlzznsgzsk y-travel 1.000 mm z-travel 1.000 mm control iTNC 530 HEIDENHAIN table-size 3.230 x 1.050 mm table load 8,0 t spindle taper ISO 50 tool change unit 24 Pos. spindle turning speed range 30 - 3.500 U/min drive capacity - spindle motor 25 kW feed stepless 1 - 5.000 mm/min rapid traverse 10,0 m/min chip conveyor Spiralförderer voltage 380 V total power requirement 35 kVA weight of the machine ca. 13,5 t dimensions of the machine ca. 7,40 x 3,65 x 3,60 m hydraulic power unit 1,40 x 0,50 x 0,60 m 0,45 x 0,70 x 0,85 m - Serial No.: VH-30041 - Maschine ON 23.724 h - Spindel ON 7.968 h - CNC-Control: iTNC 530 HEIDENHAIN - Universal Milling Head (Huron-Type), manual - 2x Screw type chip conveyor at front and back of table - Oil chiller unit - Y-Axis guitde ways with new TURCITE - Ball screws and bearings in X/Y/Z axis renewed

Condition: used, Year of construction: 1969, grinding length 500 mm grinding width 200 mm workpiece height 250 mm total power requirement 5,5 kW weight of the machine ca. 2500 kg dimensions of the machine ca. m J U N G Horizontal High Precision Surface- and Profile Grinding Machine Model HF 50 RD, Year 1969, partially reconditioned in 2021 Serial-no. 4082 _____ Grinding length max. 500 mm Grinding width max. 200 mm Table size 600 x 200 mm Grinding height under grinding wheel approx. 250 mm Table cross travel approx.. 230 mm Table slide cross stroke 0,2 - 8 mm/table stroke Table longitudinal travel max.. 550 mm Table speed longitudinal 1 – 20 m/min. Measurement of grinding wheel 225 x 25 x 51 mm Grinding wheel speed infinitely adjustable 1.000 - 4.500 rpm Vertical feed 0.001 - 0.01 mm/stroke Grinding spindle drive infinitely variable load 0,4 – 1,5 kW Total electrical load 5,5 kW - 380 V – 50 cycles Weight approx. 2.500 kg Accessories/Special Features: • Due to the infinitely variable speed range of the grinding wheel this design is especially suited for grinding of high alloyed steels and carbide, hardmetal, etc. • Set up switches for plunge-in or normal pendular-grinding with automatic infeed • Automatic infeed of grinding slide during surface- and/or profile grinding, (plunge-in cut)with automatic stop of infeed by contact-Gauge. • motorized rapid feed of grinding head up/down • Manual straight grinding wheel-dressing device mounted above the grinding wheel • Manual Table mounted, swivable magnetic chuck make BRAILLON size 400 x 200 mm • separate converter cabinet for infinitely variable speed regulation and with respective display of cutting speed in m/sec. • Wet grinding facility including coolant tank and bandfilter cleaning device, separate standing, • Including 3 separate flanges, some grinding wheels, service tools, etc. Condition : good – can be inspected here under power, partially reconditioned by a JUNG Specialist (table pistons, lubrication, infeed system, Dresser, covers, etc.) Delivery : ex stock – as inspected Lasdpfx Ajt Hwziegzek Payment : net– after completion of contract