Decoiler up to 4t

SAS RAZ-END 1250/4

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. Nodpfxjfz U S Eo Amtolh The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: new, Year of construction: 2024, Roller for sheet metal unfolding. Working width: 1.250mm. Njdpfodv Duwox Amtslh

Condition: new, - Capacity: 100 tons - Cylinder stroke: 400 mm - Working width: 1500 mm - Cylinder is movable - Electrically or manually operated - Pressure gauge - Emergency stop Njdpfx Amsilvb Netslh - 400V

Condition: new, Year of construction: 2026, -TFON Leveltech® Leveling Machine. -The TFON Leveltech® is a robust and precise leveling machine designed to handle a wide range of material thicknesses with efficiency and ease. Engineered for reliability and performance, it ensures flat, smooth surfaces on metal sheets and strips to meet stringent quality standards. Nljdpfjkyrphsx Amtoh Key Specifications: -Material Thickness: 1 mm – 30 mm. -Maximum Material Width: 1,600 mm. -Minimum Material Length: 145 mm. -Quick Change System for Straightening Rollers: Standard. -Flattening Gap Adjustment: Servo Hydraulic with PLC Control -Machine Dimensions (L × W × H): 5,465 × 6,735 × 2,300 mm -Total Weight: 40.000 kg..

Condition: new, Year of construction: 2025, total width: 1,000 mm, total length: 1,600 mm, total height: 950 mm, power: 1.5 kW (2.04 HP), Roof panel roll forming machine F3-27 with clip relief Nlsdpfjp Stgnjx Amtjh LLC “Evolutioner” designed roof panel roll forming machine F3-27 with clip relief for metal roof production of double standing seam profile. Standing seam roof is widely used in the manufacturing of various buildings and structures, in the reconstruction of ancient houses and architectural objects. Standing seam gives a beautiful appearance to the roof, pointing its uniqueness and aesthetic design. In modern construction, standing seam panels often decorate the facades of walls of various buildings. The roofing machine F3-27 allows you to roll metal roof panels of various lengths, the rolling length is unlimited. The machine is quite lightweight, which makes it possible to use it directly at the roof installation place and forming panels directly on site. Thus, there is no need to transport finished roof panels from the workshop to the roof installation place, avoiding their possible damage and saving money on transportation services. Technical details: Rolling length – unlimited; Forming steps: 7; Lock high (mm): 27 Metal roof panel machine F3-27 is equipped with width easy adjustable system, so to adjust the width of the panel you just need to turn the special wheel. As extra options with F3-27 roll forming machine you can get: - cross cutting knife; - length measuring device; - ribbed panel rolls; - radius panel rolls; - standing seam hand seamers; - electric seaming machine ESM-1; - sliding clip formers; - fixed clip formers; - floor decoiler; - ribbed panel forming machine RPFM; - automatic shear with automatic system; Portable roof panel machine F3-27 has six pairs of forming rolls to make a profile height of 27 mm and an additional stand for rolling clip relief. A relief clip is a special bend on the panel to hide sliding or fixed clips under it. Those clips are used to connect roof panel to the roof frame. In addition, we produce following metal roof panel machines: standing seam metal roof machine F3; roof panel machine F3-9 with clip relief; snap lock roof panel roll forming machine SL-1; automatic snap lock roof panel machine SL-1 auto;

Condition: ready for operation (used), Year of construction: 1990, MARKON Log house drilling machine with undercutter year 1990 manufacture Markon Lathi / Finland Nodpfofw Rt Rsx Amtslh Length = 3550mm Width= 1500mm Height= 2910mm Engine power Drilling unit: 6 x 3 kW moulder: 1 x 5.5 kW Dimensions of the log to be pushed Height max 250mm Height min 130mm Width max 250mm Width min 60mm Length min 600mm Tool sizes and speeds Drill max diameter 40 mm Moulder max diameter 250 mm Drill length 325 mm Drill mounting arm diameter 20h7 mm Drill rotation speed 2880 rpm Moulder: rotation speed 2880 rpm AIR Suction openings dia. 160 mm 2 suction openings Drill unit suction opening diameter 90 mm Suction openings 6 pcs Air speed at the suction opening 30 m / s Air consumption 8460 m3 / h electrical connection Total power 380 V 24 kW Compressed air connection Minimum pressure 6 bar Drilling unit air demand / stroke "48 1 Total air demand ~ 2200 1 / min incl. 3,5 meter roller conveyor + 12 drillings

Condition: new, Year of construction: 2025, Profile machine MZP-02 2m The MZP machine is used to corrugate sheets to ensure stiffness of thin sheets in the ventilation duct sector. Rolls made of high quality steel can roll 2mm aluminum sheets and 1.2mm black steel sheets. The machine is equipped with transport wheels that allow you to quickly change the location of the machine in the workshop. Machine Specs: Engine with editor Nljdpfx Amjfwxm Djtsh Chain driven roller system Fully welded construction Transport possible thanks to the wheel The pressing force can be easily adjusted with the help of adjusting screws Adjustable intermediate distance between the upper and lower shafts The lower and upper rollers are made of hardened long-life steel A practical machine that can be used by people operating in the ventilation industry for many years. Technical specification MZP-02 2000 Working length: 2000mm Range of processed sheets: 0.40 / 1.20mm Engine power: 0.37kW Length: 2240mm Width: 530mm Height: 1050mm Weight: 360 kg

Condition: used, Year of construction: 2003, XXL-Center RAS 75.06-2 long bending center for fully automatic positive and negative bending, where it is not necessary to turn the sheet metal. Usable length 6400 mm Maximum sheet metal thickness (400 N/mm²) 1.5 mm Four motorized and extremely fast axes controlled by CNC (no hydraulics) For: • Upper and lower bending beam speed: 126 degrees/s • Upper beam speed: 60 mm/s Nledjzru Nzopfx Amteh • Back gauge travel: 12-750 mm • Back gauge speed: 350 mm/s • Bending accuracy (depending on the quality of the sheet metal): up to +/- 1 degree

Condition: as good as new (ex-display), A fully hydraulic demonstration bending machine WIEGAND with NC- 10 control system manual or automatic bending mode automatic mode: Close upper beam, bend set angle, open upper beam bending beam or upper beam manually adjustable according to sheet thickness adjustable opening width of upper beam backgauge manually adjustable CE standard documentation bending length: 2500 mm bending capacity: 2,5 mm max. bending angle: 0 - 120°. backgauge manually adjustable min/max: 60/1000 mm Nsdpfx Amjpgmqietslh power: 3,0 kW weight: 2500 kg Tech. Data and dimensions: Errors excepted Further tech. Data see pdf. Document

Condition: excellent (used), functionality: fully functional, strip width: max. 1.600 mm Nsdey Nypkepfx Amtslh strip thickness: 0,4 - 3 mm No. of strips: max. 11 coil weight: max. 25 t coil OD: max. 2.000 mm mandrel Ø: 508/610 mm year: 1990/2002/2006/2016/2019