Panel saw

Schelling FX-H 430 / 400

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Tedpfetk It Sex Afgjd Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: refurbished (used), ECCENTRIC PRESS SGP TYPE : PEZZ 500/1700/1000 PRESSURE : 500t Todpfshqqnzox Afgod DOWN TABLE DIMENSIONS: 1700x1000mm LENGTH OF STROKE: 20-153mm DISTANCE BETWEEN RAM -TABLE: Min 700mm , Max 800mm WEIGHT: 40.000 kgr MADE IN AUSTRIA

Condition: new, Year of construction: 2025, Delivery ex works Turkey Bending length (A): 3050 mm Press force: 170 tons Sheet thickness 42kgf / mm: 8 mm Sheet thickness 72kgf / mm: 4 mm Upper tool: 1260 Top Tool 85 ° Lower tool: 50, 35, 22, 16 Distance between columns (B): 2550 mm Forward speed: 130 mm / s Working speed: 8 mm / s Retraction speed: 120 mm / s Crowning: manual (CNC-motorized available for an extra charge) X-axis travel: 750 mm Tsdpfxjgu N Alo Afged X-axis speed: 250 mm / s Backgauge fingers: 2 pieces Front support arms: 2 pieces Oil tank capacity: 180 liters Main motor power: 11 kW Stroke length (C): 265 mm Installation height (D): 450 mm Projection stand (E): 410 mm Table height (F): 870 mm Table width (G): 170 mm Length (L): 4200 mm Height (H): 2800 mm Width (W): 2200 mm Weight: approx. 7500 kg Cybelec Cybtouch 12 2D Graphic CNC control 3 axes (Y1, Y2, X) expandable with optional R+Z-Axis Eurostamp 2067 lower tool (V: 50, 35, 22, 16) Eurostamp 1260 upper tool 85 ° Narrow table All-steel welded construction Promecam quick clamping system CNC-controlled motorized backgauge (X: 750 mm) Adjustable backgauge fingers Inch and metric system can be selected Ground and chrome-plated cylinders Swiveling control panel Foot control with anti-panic stop & emergency shutdown Lateral protective grille (secured with limit switch) Light curtain on the back of the machine (900 mm) DSP laser finger protection system at the front (CE) BOSCH / REXROTH or HOERBIGER / HAWE hydraulic system BOSCH / REXROTH or ECKERLE hydraulic pump Slidable front support arms (2 pieces) Electronics unit from: SIEMENS, SCHNEIDER, DELTA, ABB, OMRON 380 V 50 Hz Painting: RAL 7035, RAL 5015 Optional special accessories available at an additional cost: -CNC-controlled R-axis (250 mm) -CNC motorized crowning -Servo driven motors backgauge system for X + R axis (Mitsubishi) -Painting in special colors on customer request Documentation in German or English CE conformity

Condition: excellent (used), functionality: fully functional, POINT TO POINT BORING machine with CN model MASTERWOOD SPEEDY 207 second hand machine for custom furniture manufacturing, kitchen furniture, bathroom furniture, and various processes Tsdpfewd Irvex Afged Boring head with 5 independent vertical chucks and 1 double horizontal chuck Saw for longitudinal cuts Machine table with 1390 x 750 mm boring capacity and two side jump up stops handled by the control unit to execute with only one program and one intermediate hold panels up to 2800 x 750 mm size Possibility of boring 2800 mm panels Pneumatic tool displacement mm 60 Max panel thickness mm 50 Spindles rotation rpm 4500 Saw rotation rpm 6000 Vacuum pump motor Hp 1,5 Vacuum cup diameter mm 80 Front stop complete with 4 locking cylinders for drilling narrow workpieces and strips Multitasking control complete with interactive graphic programming, 9" video, boring programs, optimizing working cycle, graphic, parametric, diagnostic modes Overall dimensions - Machine : mm 2500 x 1800 x 1800 h - Weight kg 850 Overall dimensions - Electric board : mm 800 x 520 x 1200 - Weight Kg 120

Condition: ready for operation (used), We have a BECK HV600 shrinktunnel available. This machine is ready and is working like new! Tedpfx Afohcdhloged The measurements are in the pictures.

Condition: excellent (used), Year of construction: 1997, Single shaft shredder form Weima Model -WL6S Main motor -22kw Todpfx Afoivpthogjd

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Tsdpjy Ehrxofx Afgod Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, functionality: fully functional, power: 9 kW (12.24 HP), cutting height (max.): 82 mm, saw blade diameter: 315 mm, rotational speed (max.): 4,400 rpm, total length: 3,300 mm, total width: 3,350 mm, overall weight: 3,000 kg, cutting length (max.): 3,300 mm, feed rate X-axis: 100 m/min, feed rate Z-axis: 150 m/min, saw blade speed: 4,400 rpm, saw drive: 9,000 W, Equipment: rotational speed infinitely variable, SCHEER PA 4500 – 3300 x 3350 S7WIN10 Year of manufacture: 2025 | Condition: NEW | Control: PA-WIN10 + SIMATIC S7 | Powerful panel dividing system for highest precision & efficiency The SCHEER PA 4500 is a robust, industrially proven panel dividing saw for the precise processing of coated and uncoated wood-based panels. It was designed for demanding applications and already meets all the requirements of modern cutting operations in its basic configuration. Main technical data: Cutting length (max.): 3300 mm Cutting height (stepless): up to 82 mm Main saw blade: Ø 315 mm | 60 teeth | cutting width 3.2 mm Tjdewrpcxopfx Afgsd Scoring saw blade: Ø 200 mm | conical | cutting width 3.2–4.0 mm Saw motor: 9.0 kW Scoring motor: 1.1 kW Saw carriage drive: 2.32 kW Main saw blade speed: approx. 4400 rpm Saw carriage feed: 0–100 m/min (stepless adjustable) Saw carriage return: 150 m/min (lowered) Electrical connection: 400V / 50Hz / 3Ph Pneumatics: 6 bar, 15 NL/stroke Extraction: 3 x 140 mm | Capacity: 3300 m³/h at 20 m/s Working height: approx. 930 mm Angle stop: left Machine concept & highlights: Heavy cast honeycomb construction for vibration damping Absolute value encoder for highest positioning accuracy (no referencing) Distance- and time-optimized saw carriage operation Automatic oil mist lubrication & blowing of the guides Program-controlled saw blade adjustment (height & scoring side) ProLock quick-release system for the saw blade “wood dust tested” – emission only 0.65 mg/m³ System equipment: 1x angle pressing device WP 8500-1400 Adjustment range: 0–2200 mm Pressing force: approx. 480 N Cycle-controlled retraction function for panel transport 1x material feed table HP 5130 – 33 x 33 Mounted at the back with hardened guides & racks Roller conveyor system for easy panel transport 6 clamping fingers (spacing: 70 / 262 / 454 / 838 / 1173 / 2630 mm) Servo drive with ±0.1 mm accuracy 1x angle stop table HP 5137-1-1465 1x workpiece support table HP 5135-1-1465 Pertinax coating, each 1465 x 800 mm 1x air cushion unit LK 5169 central radial fan, pressure max. 2800 N/m² 1x control cabinet dustproof, separately mounted, vibration protected 19" TFT flat screen, keyboard, trackball Control & software: SIMATIC WinLC RTX soft PLC with S7 functionality PA-WIN10 operating interface on Windows 10 Professional (64 bit) (update to the latest Windows version possible at any time) True-to-scale real-time simulation and graphical cutting plan editor Integrated interfaces (label printing, panel warehouse management, etc.) Network-capable, future-proof, modularly expandable Operating modes & operation: Manual operation: single, chain dimension, trimming, residual cutting Automatic operation: cutting plan processing, online order processing Editor: parts list-based planning & optimization Maintenance & diagnosis: saw blade measurement, individual control, and more 📞 Contact us for an individual offer or a viewing. Delivery, installation, commissioning, and training possible as options.

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: 241.125, functionality: fully functional, Horizontal Beamsaw of the manufacturer Schelling, designed for cutting wood-based material HPO – cutting optimization program Saw blade projection: max. 95 mm Tjdpex Ebzdjfx Afgsd Saw carriage feed up to 120 m/min Cutting lengths: Model FH 4 430 - 4.300 mm Can be inspected in working condition until beginning 2026. (dismantling planned) Maximum Saw blade Diameter - 350 mm Projection - 95 mm Clamp opening 90 mm Power Saw motor - 15 kW Scorer Diameter 300 mm Feed rate forward up to 80 m/min reverse 80 m/min Saw feed rate forward up to 120 m/min reverse 120 m/min

Condition: used, pressure 55 t throat 250 mm stroke 10-90 mm table-size 640 x 495 mm no. of strokes 120 Hub/min ram adjustment 55 mm Tjdpfxecp Apyj Afged ram surface 290 x 210 mm ram hole 40 H7 mm hole in the table 220 x 190 mm T-slots 22 clamping plate 620 x 485 x 65 mm total power requirement 4,5 kW weight of the machine ca. 3,4 t dimensions of the machine ca. 1,5 x 1,2 x 2,2 m