Segmented folding machine

Schröder ASK 1000

Condition: new, carrying capacity 500 kg. number of suction cups 6 Stück suction cup dia. 215 mm Dsdpfx Aoxak Ddjcpecn 0 8.0 m³/h tool adaptor Kranöse 80.0 mm voltage 400 V total power requirement 0.18 kW weight of the machine ca. 120 kg dimensions of the machine ca. 2400 x 1100 x 584 mm Furnishing : - for the horizontal transport of smooth, dry and airtight panels - Robust supporting structure made of steel - Painted in RAL 2000 with low weight - Galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x springy, articulated and adjustable suction cup holders - 6x suction cups Ø 215 mm - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump - with a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) - Operating handle can be extended to 1,000 mm from the center of the traverse - Sturdy metal case for your crane control - Operation "suction / release" by hand slide valve - Control and safety device for vacuum lifters * Robust control box. * Contactor circuit for the vacuum pump * Safety warning device with audible alarm * Vacuum gauge with danger zone indicator * Large vacuum storage tank with safety check valve * Double actuation when releasing the load - Fine dust filter to protect the vacuum pump - Documentation * Special accessories included: - 6x ball valves to switch off individual suction cups * so that smaller formats can also be lifted * without having to move suction cups or traverses - Spiral connection cable small helix * with an extension length of 3,500 mm, version as * Extension cable with CEE plug and coupling * is routed to the lifting device next to the load chain

Condition: used, mileage: 456,492 km, power: 125 kW (169.95 HP), first registration: 05/2000, fuel type: diesel, overall weight: 7,490 kg, color: green, gearing type: mechanical, number of seats: 2, Equipment: crane, * Remote control * 28 meters lifting height * Max load capacity : 500Kg * Klaas superstructure Dedpfor A Adcsx Acpocn * Hatz diesel engine

Condition: used, Year of construction: 1998, functionality: fully functional, For sale: Coil metal decoiling, slitting, and recoiling line Condition: used, connected – available for live demonstration. Designed for coil metal decoiling, precise slitting into narrower strips, and recoiling into smaller coils. Technical specifications: Year of manufacture: 1998 Made in: Poland Max. metal width: 1250 mm Knife pairs: 5 Longitudinal slitting, steel: min 0.4 mm / max 1.2 mm Film application function Scrap cutting guillotine Line includes: Decoiler 5 T Recoiler 5 T Multi-knife disc shears Braking and separating segment Turnstile with separator Control panel Purpose: Djdpfoxlcp Nox Acpecn The line is intended for preparation of coil metal for further processing: decoiling, precise longitudinal slitting, recoiling into smaller coils. If you have further questions – we will be happy to assist you.

Condition: good (used), Max width: 1300 mm Number of rolls: 5 With shear Dcedpfjflvf Ajx Acpjn

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 301 S PVC KALIPSIZ MODEL (MOLDLESS) CAM ÇITASI KESME MAKİNASI, • Complies with CE standards. • 45-degree cutting of PVC beading profiles performed with 4 saws. • Adjustable for 12 different beading cut types. • Ability to cut 2 beadings simultaneously. • 2.5-meter right/left conveyor system for long beadings. Dcsdjq U Tbropfx Acpen • Beading claw adjustment mechanism. • Pneumatic clamping system. • Optionally equipped with diamond-tipped saw for aluminum beading cutting (with cooling system). • Air gun. • Adjustable cutting speed. • Compatible with digital meter connection. • Operable with Bluetooth measuring station.

Condition: new, Year of construction: 2025, Metal siding “Soffit” production line SPM-1 auto Metal siding “Soffit” production line SPM-1 auto is an excellent solution for companies with business in metal siding and metal decor elements production for various buildings and structures. Soffit profiles are very popular to arrange gables, cornices and attics, and without perforation, they can be part of cladding building facades of various configurations. Perforation holes provide additional ventilation of the under-roof space and, therefore, optimal conditions for the roofing system. Air circulation helps to avoid the formation of condensation and extra humidity, as well as corrosion of metal tiles or corrugated sheets. Metal siding Soffit SPM-1 auto is fully automatic line. This equipment can go as a separate automatic machine, consisting of a rolling mill with an automatic system and an automatic profile guillotine, or in combination with an uncoiler. The metal uncoiler can be manual for working with metal rolls up to 800 kg or automatic, with a loop converter and speed control for working with rolls up to 1500 kg. Specifications: Dcodpfx Acewwip Aspen Dimensions (mm) 6650x1200x1600 Weight, kg): 2900 Drive power rolling machine: 3 kW, 380V Drive power guillotine shears: 1.1kW Maximum thickness of sheet metal (mm.): 0.6 Forming steps number -18 Shaft diameter (mm) – 55 Rolling speed (m/min.): 10-15 Automatic roll forming soffit panels production machine SPM-1 auto makes panels with unlimited length. The machine has 18 pairs of forming rolls, providing high quality of the final products. There is special perforating module on the final stands of machine, responsible for cutting out perforation holes during roll forming. It is possible to use the machine both with and without this module, thus it is possible to obtain panels both with and without perforation, depending on the customer’s needs. We use alloy tool steel for rollers of machine and make them on high-precision CNC turning equipment, ensuring high product standards. Guillotine profile shears is at the machine exit and has electric drive to work. The electric drive of the shears is a more reliable solution compared to pneumatic or hydraulic systems for working on cutting shears of other line manufacturers. The rolling speed of the line is 10-15 meters per minute with the possibility of programmatic adjustment of this parameter. Specifications: Material width (mm) 409 The material thickness (mm) 0,4-0,6 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: used, Technical details: cutting capacity: 1 mm round blank diameter max.: 1000 mm cutting capacity: 1 mm round blank diameter max.: 1000 mm Weight approx.: 0,2 t Dodpou Icqyjfx Acpscn dimension machine xH: 2,0 x 0,5 x 1,4 m Application: manual cutting of round steel sheet parts upper blade Ø 69mm x 11mm; adjustment vertical 25mm with hand toggle lower blade Ø 74 x 15mm; adjustment NO = fixed Centering fixture with die The material is clamped manually with handle vertival 15mm. Displacement horizontal 500mm manual. *

Condition: good (used), functionality: fully functional, Year of construction: 2005, Hydraulic Swivel Bending Machine Manufacturer: TENSOL, Type: H200.60 Year of Manufacture: 2005 Technical Data Manufacturer: TENSOL Type: H200.60 Year of Manufacture: 2005 Usable Length: 6000 mm Capacity: 2 mm Djdpfx Acezumhhspocn Motor Power: 7.5 kW Dimensions: approx. L 7.00 x W 1.60 x H 2.20 m plus hydraulic unit (1.1 x 0.7 m) Weight: approx. 8 tons Equipment • 2D graphics control • Automatic sheet thickness adjustment • Controlled rear stop, 1000 mm • Overhang 1050 mm • Automatic roller shear • Bending rail 10 mm • Reinforcement rail 15 mm All information is without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, mileage: 260,451 km, power: 141 kW (191.71 HP), first registration: 04/1980, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, Equipment: crane, Hello! We are pleased to welcome you. We are offering you the vehicle with the following equipment: Please be sure to leave us your telephone number in your message! * Crane truck/mobile crane * Year of manufacture 1980 * MKG crane works perfectly and everything is sealed * Support legs work and are also sealed * Tires still have approx. 60% tread * Engine and transmission also OK! * Crane height up to 30 meters!!! Our services: - Fresh TÜV+ASU - Delivery throughout Germany Dsdstpr Sgepfx Acpocn - Test drive possible at any time - Attractive financing conditions - Vehicle trade-in Opening hours also on Sundays by appointment We look forward to seeing you!

Condition: good (used), 2 double-flap winding units with shaft Diameter 500 mm, length 1650 mm Hydraulic expansion, 150 bar Load capacity 15,000 kg Band width 1500 mm Dedogzpbwepfx Acpjcn Price 12,000.00 EUR / unit