Good condition | Year of manufacture 1989

Schuko

Condition: used, Year of construction: 2006, Nominal volume flow: 4400 m³/h. Suction nozzle: 250 mm. Motor power: 5.5 kW. Nominal speed: 2880 rpm. Equipped with a fire extinguishing system. Weight: 730 kg. Nwjdpfx Aeyw Tw Dof Uoi Location: Nattheim.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, machine/vehicle number: M961316, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Herber, controller model: CNC 4, pipe diameter (max.): 20 mm, pipe length (max.): 3,000 mm, bending angle (max.): 190 °, bending radius (max.): 120 mm, bending radius (min.): 15 mm, working width: 3,000 mm, number of axes: 3, working height: 750 mm, table length: 4,500 mm, table width: 1,350 mm, table height: 750 mm, overall weight: 1,300 kg, input voltage: 400 V, input current: 16 A, input frequency: 60 Hz, type of input current: AC, operating pressure: 120 bar, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, The machine is in very good condition and is serviced regularly. Nodpfsw Snm Iox Af Uswi

Condition: like new (used), Year of construction: 2019, Vacomat 350 XP TWIN The Vacomat 350 XP TWIN is a high-performance dust extraction unit and a true energy-saving marvel among mobile dust extractors. Two frequency-controlled motors (5.5 kW each) ensure that the suction power is adjusted accordingly, especially under highly variable operating conditions. This ensures that only the energy that is actually needed is consumed. This dust extractor handles air volumes of up to 10,000 m³/h and is ideally suited for extracting dust from large CNC machines or entire machining centers. The innovative and highly intelligent control system automates the extraction process in conjunction with the connected machines. Extraction starts automatically as soon as a connected machining center is switched on. If the power requirement is lower, only one fan is started. As soon as several extraction points are in operation, the second fan is automatically switched on. As standard, the filter sleeves are cleaned automatically during operating breaks, as soon as all connected machining centers are switched off. Our patented filter shaking system then ensures gentle cleaning via a pneumatic/mechanical process using a compressed air connection (inlet pressure 6 bar, air consumption per cleaning cycle approx. 11 l). Optionally, and particularly recommended for very high and extremely fine dust concentrations, such as gypsum dust, an efficient pressure pulse cleaning system is available. The cleaning process via the compressed air tank takes place offline, after the extraction operation (NOTE: height then +100 mm and length +350 mm). Our Vacomats are manufactured using a modular system. As standard, the dust and chip mixture is discharged into four dust-tight chip collection containers (4 x 120 l) with durable plastic liners. A negative pressure channel securely holds the foil bags in the collection container. Viewing windows make it easy to check the fill level. Low energy consumption thanks to a modern, high-efficiency motor (IE3) "Made in Germany" and a flow-optimized internal housing with low air resistance. Heat recovery through a recirculation system: The warm exhaust air is filtered and fed back into the workshop. Low noise level: A double-walled filter sleeve housing absorbs the extraction noise directly inside the Vacomat. In addition, the fan housing is soundproof. Approved for indoor installation in the wood dust area - manufactured according to the new DIN EN 16770 standard. Healthy return air: High-quality, specially developed filter materials made of antistatic polyester needle felt filter out 99.9% of dust and chip waste from the air (dust class M for St 1 dust, according to TRGS 553). Increased safety through fire and explosion protection measures according to DIN EN 16770: pressure pulse tested up to 20,000 Pa, automatically activated powder extinguishing system - no water damage! Operational reliability: A pressure gauge continuously monitors the extraction performance. Error messages are displayed by the signal light. Low follow-up costs due to high-quality components and long service life of the filter medium: For example, an extra-large settling chamber ensures an initial separation of coarse chip waste. This prevents the filter sleeves from being additionally loaded with material. Low maintenance effort thanks to the maintenance unit on the motor console and easy access to the inside of the filter. All specifications according to the manufacturer. Njdpfxszp Edwj Af Uowi

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, volume flow: 9,400 m³/h, power: 15 kW (20.39 HP), input frequency: 50 Hz, Two fans are offered; the stated price is for each fan individually. Nwsdpfxoxcv Nds Af Uoi The two fans are identical in design. In addition, suitable pipe material can be purchased separately, if required.

Condition: good (used), Year of construction: 1990, Beading machine RAS 12.31 Nwjdjvk D Tdjpfx Af Usi Sheet thickness max. 1.75 mm.

Condition: ready for operation (used), Year of construction: 1995, Schuko spray booth wall with supply air unit + supply air ceiling Offered at a special price, but must be dismantled by the buyer Nwodpfsxvivqox Af Uji Technical data: see photos Location: ex-site Saarland

Condition: used, Year of construction: 1994, Bagging stand filter Second-hand Year of manufacture: 1994 Nsdpfjzk N H Ssx Af Uswi with weather protection cladding with return air ducting with S 250 fan 4590 m³/h Motor 4 kW Availability: at short notice Storage location: Villingen-Schwenningen If you dismantle and collect the unit yourself from the site, it can be made available for 500.-€ + VAT

Condition: used, explosion proof used, good condition rotatable in the wall bracket Make Norka Nwodevwf Atepfx Af Uoi 58 watts Approval IP 65 Number of tubes 1 Storage location 97447 Gerolzhofen, freely loaded, unpacked Handover in the current condition, as seen without guarantee and guarantee

Condition: used, Year of construction: 1999, Second-hand fan Centrifugal fan with V-belt drive Suitable for use in both raw air and clean air applications Nwsdpfx Afszk Niyo Uji Steel impeller with steel blades mounted on a multi-bearing intermediate shaft Discharge direction GL 360/5 Connection: 300 mm Motor power 11 kW Air flow rate 7,000 m³/h Availability: at short notice Storage location: Röllbach

Condition: used, Year of construction: 2003, Filter area: 50 m² Dimensions: 1650 x 1580 x 3550 mm Weight: approx. 500 kg Substructure with discharge screw: Briquetting press Schuko C 800 - 2 with extinguishing device Motor: 1.5 kW Weight: approx. 1200 kg Nwodpfxezb N T Ue Af Uji Storage location: Supplier

Condition: used, Year of construction: 2011, Mobile dust extraction system, Schuko connection, diameter 160 mm Nsdpfxozmag Ij Af Uewi Dimensions L/W/H in mm: 2045x870x2125 Power: 2.2 kW

Condition: new, SCHUKO Vacomat 140/160 XPe clean air extraction system - Exhibition unit - Filter generation motorized, mobile, extraction side right or left, can be remounted ----- Technical data ----- Test mark: H3 / BGHM HO 193023, Extraction nozzle Ø: 1 x 140 / 160 mm, Nominal volume flow: 1,447 m³/h, max. negative pressure: 2,200 Pa, Filter area: 9.5 m², Residual dust content: < 0.1 mg/m³, Number of bags: 1 piece, Motor: 2.2 kW, Dimensions (LxWxH): 1,665 x 900 x 1,980 mm, Nodju R Szyspfx Af Uswi Weight: 306 kg, Dust class M: AWN 16 - new exhibition machine -

Condition: new, Year of construction: 1985, Blow-in diameter: 300mm Spähesacks: 4 Nodpfeurv Hbjx Af Ujwi Filter area: 16 Filter cleaning: manual Dimensions: approx.: 1900 x 670 x 2800 mm (L x W x H)