Multi blade saw

SCM M3, 22KW

Condition: excellent (used), Year of construction: 1998, I sell the window production set: 1pc. tenoning profiling centre Weinig Unitec 10 1pc. profiling automat centre Weinig Univar 10 Year 1998. Dsdpfx Ajfzzhyjarowd Moulding heads OERTLI. Available immediately. Total price 17.000 euro. Condition very good !

Condition: used, Year of construction: 1994, Used, good condition, top equipment, low operating hours. Equipped with 2 rubber outfeed rollers, segmented infeed roller, electric adjustment. Machine cleaned and lubricated. Planer knives replaced. Test planing completed. Machine is complete with all settings. Manufacturer: Hofmann Dwsdpfxeythclo Aared Model: DH 510-2 Year of manufacture: 1994 Machine no.: 51/2-490-3452 GS wood dust tested Motor: 4 kW Planing width: approx. 510 mm Planing height: approx. 260 mm Segmented pressure bar Segmented infeed roller 2 rubber outfeed rollers Feed rate: 7/14 m/min Number of knives: 2 Knife system: strip planer knives Brück reversible knives Digital height display for planing height Electric height adjustment with handwheel fine adjustment Extraction connection: D 160 mm Space requirement approx. 1000 x 1000 x 1500 mm Weight: approx. 800 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in current condition as inspected, without warranty or guarantee.

Condition: new, Year of construction: 2022, Working width: 630 mm Planing height: 300 mm Planer cutterhead: Tersa Number of knives: 4 Height adjustment: electric Indicator for planing thickness: mechanical counter Feed rate: 7-11-15-19 Infeed roller: steel, segmented Pressure bar: segmented Outfeed roller: rubber Djdpehpl T Hefx Aarjwd Table rollers: no Table extension: yes, infeed and outfeed Motor power: 7.5 kW Dust extraction connection: 160 mm Machine length: 1070 mm Machine width: 900 mm Weight: 750 kg

Condition: used, Year of construction: 2021, functionality: fully functional, HORIZONTAL BAND SAW HTZ 1300 PLUS • Main motor power: 75 kW • Maximum log diameter: 1250 mm Dedpoz D Uc Aefx Aarjwd • Maximum log length: 6 m • Wheel diameter: 1320 mm • Fully automatic cutting system with MEBOR V1040 OPTI FAST • Automatic board removal and board guiding device • High-speed servo head lifting and lowering • 6 hydraulic clamps • 6 hydraulic rollers • 3 log turning devices • 6 hydraulic corner devices • Lifting belt conveyor for boards The machine is sold in combination with a log deck (with high-speed loading arms). The machine will be factory refurbished.

Condition: used, Leitz HM - IV 66 window set with sash and door handle set Sold as is, tools have not been newly sharpened, Ex works, from the Seevetal location, excluding transport, subject to prior sale. Djdpjhzgy Nefx Aarowd

Condition: excellent (used), functionality: fully functional, Four-side planer / Four-sided moulder Compact 23 Max. working width 230 mm Max. working height 125 mm Max. diameter of profile tools 180 mm Surfacing spindle 4 kW Vertical spindle 5.5 kW Upper horizontal spindle 4 kW Dwjdpfx Ast Dk Rxearjd Lower horizontal spindle 4 kW Machine dimensions 3200 x 1400 x 1600 mm, Weight 1850 kg Transport available for an additional charge!

Condition: used, SAC RS/530 Thicknesser width mm. 530 Dwsdoyzfvgjpfx Aarsd

Condition: used, Year of construction: 2012, Integrated NC machining center for windows and doors composed of: A) Automatic loader mod. "SP" Automatic loader for Base SP N. 1 moulder -Automatic loader consisting of: -Table with motorized belts -Automatic device for moving pieces from the buffer to the Dsdpfjixxwmex Aarewd loading surface of the moulder * Piece length min: 450 mm max: 3200 mm * Piece width min: 40 mm max: 230 mm * Piece thickness min: 40 mm max: 120 mm * Work cycles 10/min * Chain advancement speed on the table: 7 m/min * Loading table dimensions 2800 x 2150 mm B) Automatic moulder mod. SUPERSET NT C 6 Position 1 = Planer Shaft Position 2= 1st right vertical shaft Position 3= 1st left vertical shaft Position 4= 1st upper horizontal shaft Position 5= 1st lower horizontal shaft Position 6= Group for slat recovery 2500 mm entry level Speed 6-36 m/min via inverter No. 1 - engine power 5.5 hp (4 kw) Horizontal presser before the planer with pneumatic exclusion from the panel Pneumatic exclusion from the control panel for the feed unit located before the planer shaft Tandem advance group in front of the right vertical with rapid exclusion Advance groups after the upper ones for reducing the towing distance from 620 mm to 450 mm Input guide with bearings for automatic feeders Electrical predisposition for the use of automatic loaders Manual centralized lubrication Pump for lubrication of the work surface with automatic drive Setup for in-line integration with INTEGRA SYSTEM - work surface raised to 970 mm - traffic light at entrance - piece counting Independent electrical panel POS. 1 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) T-SET quick tool locking -allows tool locking/unlocking with the simple use of a compressed air gun POS. 2 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic vertical positioning POS. 3 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) High precision shaft Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic horizontal positioning POS. 4 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking Electronic vertical positioning POS. 5 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking POS. 6 Glass bead recovery group Comprehends: PRL allows the automatic transition from planing to function recovery of the glazing bead and vice versa. - operating group with shaft diameter 30 mm, length 30 mm - electronic horizontal positioning - electronic vertical positioning - hardware and PLC modifications for axis management - tandem exit and modified hood second advancing group after the universal C) Connection transfer Transfer for receiving pieces from the moulder and automatic insertion into the Sott

Year of construction: 1998, condition: excellent (used), I sell the window profiling automat centre Weinig Univar 10 Dwodpfefzzhrox Aarjd Year 1998. Moulding heads OERTLI. Available immediately. Unit price 8.500 euro. 4 pcs. available. Condition very good !

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: 3398, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, cutting height (max.): 200 mm, blade shaft diameter: 70 mm, Equipment: CE marking, SECOND-HAND 2 SHAFTS MULTIRIP SAW COSMEC MOD. SMB200 - Max. Cutting height mm. 200 - Belt width mm. 400 - Adjustable feeding speed m/min 5/30 - Main motor KW 45 x 2 Dwjdpjywd Nksfx Aarod - Shaft diam. mm. 70 - CE rules - Year 2002