Lathe - cycle controled

SEIGER SLZ500E

Condition: new, Measuring area: 75 - 88 mm Gbjdpfxsd Efd Ij Ah Eow

Condition: used, Year of construction: 2008, turning diameter 720 mm turning length 3000 mm centre height 360 mm spindle bore 106 mm turning speed range 1 - 1800 U/min tailstock quill taper MT 6 workpiece weight max. 3800 kg total power requirement 36 kW weight of the machine ca. 6100 kg dimensions of the machine ca. 4800 x 2450 x 2000 mm CNC lathe - cycle-controlled Equipment: - Chip conveyor - Coolant device - 3-jaw chuck Ø630 mm Gbodpfx Ahew A Sqms Eow - MUTLI-FIX quick-change holder - Live center - Machine light

Condition: used, Year of construction: 1995, turning diameter 300 mm Gbedpfx Ahjt Hw Suj Eew turning length 710 mm control SIEMENS SINUMERIC 840 total power requirement 40 kW weight of the machine ca. 6000 kg dimensions of the machine ca. m I N D E X (Germany) CNC Controlled Slant-Bed Chuck Lathe with Turret and Tailstock and INDEX CNC Control C 200 – 4 (SIEMENS) Model G 300 Year 1995 S/N 5000 65 _____ Turning - Ø, with chuck, max. 300 mm Spindle bore 90 mm Max. Workpiece Swing dia. 400 / 590 mm Turning length / travel of turning slide, (X-Achse) max. 710 mm Turret head slide cross movement (Z-Axis) max. 140 mm Turret with 12 tool holder positions DIN 30 mm Feed range of turret slide / Quickfeed 0,1 - 20 m/Min. Feed Force of X/Z-Axis 8 – 13 kN Steplessly adjustable Spindle speeds up to 5.000 rpm Torque Forceon main spindle approx. 275 Nm Spindle drive 28 kW Total electrical load appr. 40 kW - 400 V - 50 Hz Weight 6,000 kg Accessories / Special Features: * INDEX CNC Control Model C 200-4 resp. SIEMENS 840 C for 3 Axes X/Z Axis and Main spindle as C-Axis (Spindle Orientation) Control Panel mounted swivable on front left side of machine. * Spindle orientation in 2,5° degree steps and Spindle indexing device * Mounted hydraulic 3 Jaws Chuck make FORKHARDT Model HS 250 with many Sets of jaws. Speed up to 5.000 rpm * INDEX- Turret with 12 positions for DIN 30 tool holders, prepared for driven tools and motorized by the indexing motor, Choice of approx. 40 pieces toolholders * Hydraulic Tailstock with stroke of 50 mm and with concentricity correction device * KNOLL – Swarf Conveyor with Coolant Device and High Pressure Pump, Sliding door, Oilskimmer, etc. Condition : Good to very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Year of construction: 1990, condition: excellent (used), Equipment The machine can be upgraded with new software and control system according to customer requirements. Measuring range X = 850 mm Y = 1200 mm Z = 600 mm Measurement accuracy 2,5µ + L/250 Godpoff Eakjfx Ah Esbw Price: on request! We would be happy to provide you with a detailed offer! Please note: Our offer is directed exclusively to professional customers. (Changes and errors in the technical data, information and prices as well as prior sale reserved)

Condition: used, Year of construction: 1998, turning length 3500 mm swing diameter 1000 mm centre height 500 mm turning diameter over slide 600 mm weight of the machine ca. ca. 8,5 t including 2 lynettes and 900mm faceplate Godpfjv Hhv Iex Ah Eobw

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: ST-35, Haas ST-35 CNC lathe - precision and performance for your production -used- Increase your manufacturing efficiency with the proven quality and performance of the Haas ST-35! This robust CNC lathe offers you the perfect combination of power, accuracy and flexibility for a wide range of applications. Highlights: • Large turning diameter: Ideal for machining large and complex workpieces. • Powerful spindle: High speeds and strong torque for demanding materials. • Precise control: User-friendly Haas control for easy programming and short set-up times. • Robust design: Durable and low-maintenance - perfect for continuous use. • Flexibility: Versatile applications thanks to various tool holders and options. Perfect for: • Metalworking • Prototype construction • Small and large series production The Haas ST-35 is ready to use straight away and is waiting to take your production to the next level. Interested? Contact us now for more information or a viewing! Don't miss this opportunity - invest in quality and precision! The machine can be viewed and tested at any time by appointment. Gbedpfev Hcz Sex Ah Esw We also offer an assembly service including installation for you. Please refer to the attached PDF for important technical information.

Condition: excellent (used), Year of construction: 2003, Available directly from the tool shop Vertical machining center Make: DMG Model. DMC 104 V Linear Year of manufacture 2003 CNC Siemens 810 D Powerline Spindle hours 18,200 (July 2024) Table area 1,250 x 600 mm X-axis travel 1,000 mm Y-axis travel 600 mm Z-axis travel 500 mm Tool holder SK 40 Spindle speeds 1 - 12,000 rpm Drive 13/19 kW at 100/40% duty cycle 30-station tool changer Godpst I Di Ajfx Ah Eobw Equipment: Linear drive on the X-axis Bed flushing system Spiral chip conveyor Direct position measuring system Drill breakage detection via laser Temperature compensation of the Z-axis via temperature sensor including active cooling unit Internal coolant supply through the spindle External air blown through 2 Pipes 700-liter coolant system, paper belt filter system with 40 bar high-pressure system Visiport viewing window on the operator door Additional machine door on the left side Bader cooling unit on the control cabinet Prepared for connecting a 4th axis with a Siemens 1FT 6064.1AF71-4AG1 drive motor and an indirect measuring system with 0.5 bar sealing air

Condition: good (used), functionality: fully functional, quill stroke: 190 mm, spindle speed (min.): 41 rpm, spindle speed (max.): 1,800 rpm, overall weight: 1,920 kg, workpiece weight (max.): 17 kg, sheet thickness steel (max.): 32 mm, torque: 250 Nm, table height: 900 mm, branded DONAU high speed radial drilling machine type DR 32 - Gbodpfsrn Riqjx Ah Ejw completely overhauled by vaumatec in 2022 - with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain as well as 4 adjustable feet to relieve the table frame) Technical data: Drilling capacity into solid material: St 60/E335 mm Ø 32 (at feed rate 0.20 mm/rev): GG 22 mm Ø 45 Thread cutting: St 60/E355 M26 Thread cutting: GG22 M35 Tool holder: MK4 Column diameter: mm Ø 195 Distance between spindle nose and table: min./max. mm 260/660 Work table height: mm 900 Quill stroke: mm 190 Column stroke: mm 400 Spindle speeds Speed series I : rpm. 41-1800 Feed rates: mm/rev 0.1-0; 15-0; 20-0.3 Torque at the spindle: max. Nm 250 Smooth running of the boom: Radial N 25 Smoothness of the arm: Axial N 25 Clamping effect: Radial Nm 3500 Clamping effect: Axial N 5500 Feed force: N 7500 Max. permissible mass: kg 17 Max. permissible moment of inertia: kgm 0.002176 Workpiece: max. table load: kg 1000 Center of gravity: in the middle of the work surface

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 880 mm, spindle bore: 360 mm, turning diameter: 1,300 mm, turning diameter over bed slide: 1,600 mm, Gurutzpe Super RT-API Lathe Description Manufacturer: Gurutzpe Model: Super RT-API Machine type: Parallel lathe with automatic threading, ideal for oilfield and hydraulic companies Main capacities: Center height: 650 mm Distance between centers: 8000 mm Swing over bed: 1300 mm Swing over cross slide: 880 mm Swing over gap: 1600 mm Gap length from spindle nose: 410 mm Travels: Cross slide: 670 mm Toolpost slide: 200 mm Spindle: Spindle bore: Ø 360 mm Speeds: 24 (7–400 rpm) Leadscrew diameter: Ø 60 mm Automatic threading: 61 metric threads 81 Whitworth threads 47 modular threads Gbodpfx Asxacn Ioh Esw 52 diameter pitch Automatic threading: 34 metric, 54 Whitworth, 20 modular, 27 pitch Feeds: Carriage with rapid traverses Main motor: Power: 25 HP Included components: 2 fixed steadies + 1 movable steady Front 4-jaw independent chuck Ø 800 mm Rear 4-jaw independent chuck Ø 800 mm Extra 4-jaw independent chuck Ø 1000 mm Quick-change toolpost FAGOR DRO Safety protections Other details: Machine weight: 12,500 kg + accessories Condition: Semi-new

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, spindle bore: 83 mm, turning length: 1,000 mm, turning diameter: 570 mm, turning diameter over top slide: 340 mm, quill diameter: 80 mm, quill travel distance: 200 mm, overall weight: 3,200 kg, chuck outer diameter: 250 mm, Equipment: rotational speed infinitely variable, The machine is in very good condition. Immediately available! Gbodpfx Ajwxw S Ish Eow Can be tested under power.