CNC Lathe

Shenyang - Fermat CAK 61

Condition: excellent (used), Year of construction: 2004, operating hours: 1,000 h, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 350 mm, turning diameter: 200 mm, travel distance X-axis: 240 mm, rapid traverse X-axis: 12 m/min, Hembrug Mill-Turn Machine Model: Slantbed Mikroturn 100 CNC Siemens 840D Control Approximate Actual Run Time Hours: 1,000 Hydeostatic Spindle Hydrostatic Ways Scale Feedback Suspended Granite Bed Garnite Spindle Housing Coolant Pump Hnjdpfx Aswcfgbsbreh Coolant Circulation Pump Pneumatic Bearing Purge Hydraulic Temperature Control Coolant Temperature Control Return Oil Pump and Reservoir for Remote Location of Hydraulic / Cooling Unit. Options & Additional Purchased Features: Tailstock Vacuum Pump for Vacuum Chucking Programable Controlled Spray Mist C-Axis Milling / Drilling Renishaw Tool Touch Probe Non-Contact Tool Incoming Air Dryer / Filter Thousands of Dollars of Brand New Tooling: Live Center Tailstock Taper Adapter 8” Micro-Centric Pneumatic Chuck 3 Sauter Straight Live tooling heads 2 Sauter 90 degree Live tooling heads 1 Special VDI offset Tooling holder 16 VDI Tool Holders for Turning, boring, and on center drilling. Tool Pick-up Video System Additional Backup Hard Drive with Software Fully Loaded and Tested. Extra Siemens Control Pannel Complete Set of Manuals Machine Upgrades I added at additional cost. New Digital Hard Drive New Backup Hard Drive with software already loaded, plug and play ready, no downtime. New Z-Axis Heidenhain Scale Rewound Hydraulic Pump Motor, factory motor was running too hot for my liking. Replaced Operator Panel, back light on monitor went out, have the original, back light needs replacing. 50 Foot Extended Wiring Harness For Remote Location of Hydraulic / Cooling Unit.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Control: Mazatrol M Plus Travel paths: x-1660 y-760 z-660 mm Clamping surface to spindle head: 155 – 815 mm Distance from column to spindle center: 808 mm Spindle inner taper: SK 40 Tool changer: 24 – compartment Spindle speeds: 7000 rpm Usable table area: 2000 x 760 mm Table load: 1000 kg Rapid traverse x, y axis: 24000 mm/min Rapid traverse z axis: 20000 mm/min Feed: 1 – 5000 mm/min Hnedpfx Absvrxd Hjreh Machine weight: approx. 8700 kg including chip conveyor, coolant system The machine can be inspected under power.

Condition: good (used), Year of construction: 2001, Manufacturer: KASTO Type: KASTOtec A4 Year of construction: 2001 Specifications: Metric Metric US Standard Sawing capacity round 90 430 Sawing capacity flat 90 430 x 430 mm Feed range 0 - 600 mm Multi-feed range 0 - 9999 mm Min, saw length 35 mm Max. Sawing speed 12 - 120 Saw blade dimensions Hedpfx Absu R R Averjnh 6830 x 41 x 1.3 mm Saw power 7.5 kW Dimensions (estimate) length 4800 mm width 2200 mm Height 2200 mm weight 5200 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), functionality: fully functional, travel distance X-axis: 12,000 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 1,000 mm, MECOF CS 50 CNC Universal Milling SELCA S3045L, Built 1997, Two axis Head C-Axes 360° x A-Axes 3° Bed 13,300 x 1,090 mm. Hnsdewdm U Nepfx Abrsh X, Column travel 12,000 mm Y, Headstock vertical travel 1,800 mm Z, Frame 390 x 390 mm, stroke 1,000 mm Bed 13,300 x 1,090 mm Two axis Head C-Axes 360° x A-Axes 3° Spindle taper ISO 50 Spindle speed 10 - 4,500 rpm Spindle motor 20 kW Automatic tool changer 41 Tools

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3150 rpm Feed range longitudinal & face: 0.5 – 5000 mm/min Rapid traverse longitudinal & face: 9 m/min Main drive: 30 kW Dimensions of machine with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Weight: 6400 kg Hodpfevr Eh Esx Abrjnh Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC manual input control system with program entry via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology with plain text display of all functions. Operator keypad, display, and electronic handwheel located within a separate chip guard housing. The EPL control offers the following capabilities: • Direct interactive program entry and editing by the operator through the EPL control without manual technological preparation • NC programs in ISO/EIA format can be entered, output, or manually keyed in via the RS 232 serial interface Machining cycles: • Removal cycles for longitudinal, facing, and contour turning, including with allowance • Thread cutting • Undercuts as per DIN 509-Form E and F and DIN 76; grind stock programmable • Axial and radial grooves as per DIN 471 and 472, including bottom finishing • 90° radii and 45° chamfers • Automatic cutter radius compensation for cycles, undercut, groove, radius, chamfer Programming: • Block-orientated, metric/inch, diameter for absolute entry, radius for incremental entry • Full circle programming, subroutine technology, hide levels for program sections, zero point offset, mode selection via menu Program entry and output: • Interactive via guided menu or direct in dialogue • Hydraulic 3-jaw chuck Ø 315 mm with through spindle bore Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, 6 standard stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 various standard toolholders (to be finalized on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1998, Technical details: internal diameter: 63 mm swing diameter: 320 - 800 mm grinding depth: 380 mm total power requirement: ca. 1,1 kW Hnodpsu Ngciofx Abroh feed:: 0,05 - 0,40 mm/U / 8 step U/min weight approx.: 1060 kg dimension machine xH: 1,1 x 1,1 x 1,4 m Brake Drum Grinding Machine - turning Ø max./min.: 800 / 320mm - brake drum holder: 63mm, quill stroke 120mm - turning support: longitudinal travel 380mm; transverse travel 200mm - steel holder holder: 180 x 140mm, steel holder 58mm, turning tool for insert holder 20 x 20mm - operation via control panel *

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 770 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, table width: 1,000 mm, table length: 4,150 mm, table load: 4,000 kg, Magnum: powerful machining in machine construction and tool making Sk50 with extremely powerful spindel 50kw Glas scales in X/Y/Z Chip conveyor and coolant system Hnedowycmmepfx Abrsh X - Travel: 3500mm Y - Travel: 1000mm Z - Travel: 770mm Table Length: 4150mm Table Width: 1000mm Table load: 4000 Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: 50ISO/Bt/Mk Power on spindle: 50kW Speeds / ranges: 4500Rpm ATC / revolver: 50 Number of controlled axis:3 Chip conveyor: yes Coolantsystem: yes Length: 8000mm Width: 5000mm Height: 3700mm Weight: 30000kg

Condition: refurbished (used), Overhauled Mazak main spindle for VTC 200 or VTC 300 for sale. The spindle has been fully overhauled, spindle bearings and intermediate sleeves have been replaced. The taper has been reground. Subsequently, it has been balanced. The maximum speed is 12,000 rpm. We have additional overhauled Mazak spindles in stock; feel free to send us your inquiry. This is an exchange spindle, meaning a core return is required. If you have any further questions, we are at your disposal. Hnedsvdkdijpfx Abreh

Condition: excellent (used), Year of construction: 2002, OKUMA Euro Center V50 Hnodpjrfw Nhjfx Abreh Year of construction 2002 Control system OSP-U100L Travel distances X-1020 Y-510 Z-525 Table load 680kg Clamping surface 1200x510 Tool changer 20 magazine places chip conveyor

Condition: refurbished (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 1276, CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 New control system PLC SIEMENS S7 Machine number: 1276 No. of Hammers: 4 Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Maximum forging diameter: Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Smallest dimensions forged: Ø 25 mm Manipulator A max. displacement: 6820 mm Manipulator B max. displacement: 7150 mm Maximum workpiece length: 6000 mm Rapid speed manipulator: 400mm/sec Total connected power: 300 kW 380 V, 50 Hz Machine dimensions: Hsdpsq U R T Nsfx Abrsnh Forging height over floor: 615 mm Total height pf the machinr over floor: 1665 mm Total machine lenght: 32670 mm Total foundation lenght: 33400 mm Tot. machine width (without auxliary equipments): approx 3885 mm Total foundation width: 16000 mm Total weight of the machine: 84.000 Kg