Thickness Planers

Socomec-Italy PS630

Condition: new, with planing spindle Type R-R-RP1300 Working width 1300 mm Min. working length 538 mm Working thickness 3-110 mm Feeding speed 6-30 m/min Total motor power 77,12 kW Motor for first unit 22 kW Motor for second unit 30 kW Motor for third unit 18,5 kW Abrasive belt size 1330x2200 mm Working air pressure 0,55mpa Volume of dust collection device 12000 m3/h Transport dimensions 3090x2020x2260 mm Kodpfed H Sc Esx Ab Tsww Weight 4700 kg

Condition: used, machine/vehicle number: 4/14242, Frank Floor Sanding Machine FSR used Engine power: 0,75 KW Voltage: 230 Volt 5 amps, 50 Hz, Machine no.: 4/14242 Ksdpfx Absb Auu Ro Tjww Dust bag Location: Ex warehouse Bitburg

Condition: excellent (used), Weinig four-sided planer max planing width 230mm max planing height 120mm 5 heads, bottom-5,5KW; left and right-11KW, top-11KW, bottom-5,5KW feed - 4KW fully adjustable heads electrically adjustable up and down and planing width 40mm spindles feed on gimbal rollers, with smooth adjustment Ksdpsrigxyjfx Ab Tsww WEINIG brand solid planer, length of the machine 415cm machine checked in original condition

Condition: new, saw blade diameter 420 x Ø 40 mm cutting diameter 170 mm cutting length 410 mm dimensions of saw-blade 420x3,2/2,4x40 mm turning speeds 3500 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 120 kg dimensions of the machine ca. 1300 x 800 x 1600 mm - Cross-cut and miter saws for cross-cut cuts - Miter adjustment on both sides (60 ° / 45 °), with fixed stop - Shifter cut on both sides 45 °, with fixed stop - Stable cast iron construction - Precise linear bushing guide on the tool slide hardened and ground steel shafts - manual saw feed - Saw blade infinitely adjustable in height - nozzle for opt. Suction Cutting data: - Cutting length at 90 ° = 410 mm - Cutting height at 90 ° = 170 mm - Cutting length at 45 ° = 290 mm - Cutting height at 45 ° = 115 mm Kwodsxabztopfx Ab Tew Special accessories included: - Adjustment of shifter cut via hand crank, both. adjustable (45 ° / 45 °) - HM circular saw blade 420x3.2 / 2.6x40 mm Z = 108 FTZ neg. For aluminum and plastic - hydraulic feed brake, infinitely adjustable - pneumatic material clamping from above consisting of: 2 vertical clamping cylinders, adjustable, with hand lever valve - machine stand

Year of construction: 2004, condition: excellent (used), Four-side planer Kodpfx Abshlp D Nj Tsww -max. planing width 23cm -max planing height 16cm -2 pulling rollers in the table -chromed table - smooth regulation of the feed speed -2 pulleys from the top in front of the lower head, additionally a roller apparatus for short elements - 4 spindles: lower 5.5kW, right 5.5kW, left 5.5kW, upper 7.5kw The machine is in very good condition, little used, with spiral heads on the bottom right and left, with a Terssa knife head on the top.

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Kwjdpfx Abeg Ezare Tow Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: good (used), Year of construction: 1969, Wood band saw, band saw machine, band saw, vertical band saw -Manufacturer: Hema Paul and Gotthilf Heermann, vertical band saw -Type: unfortunately without type designation -Drive: 4 kW -Cutting width: max.785 mm -Cutting height: max.475 mm -Saw band: length 5600 mm Kedpfx Aboh N Thwj Tsww -Work table: pivoting -Drive motor with brake -Dimensions: 1600/1020/H2430 mm -Total weight: 794 kg

Condition: used, Year of construction: 1995, Swivel spindle: Yes -5 to 45° Height adjustment: Handwheel Swivel adjustment: Handwheel Milling jaw adjustment: manual Height display: mech. counter Swivel angle display: mech. counter Milling stop display: mech. counter Milling spindle diameter: 30mm / new milling spindle Kwodpouzkwzefx Ab Tow Speeds: 3000, 4500, 6000, 9000 Motor power: 5.5 kW Motor brake: Yes, automatic Suction connection: 2 x 120mm Machine length: 2000mm Machine depth: 1400mm weight: 900kg

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: M-900iA/260L R-30iA, load capacity: 260 kg, arm reach: 3,100 mm, controller manufacturer: Fanuc, controller model: R-30iA, teach pendant manufacturer: Fanuc, Equipment: documentation/manual, IRS Robotics® Refurbished industrial robot. 100% complete and fully functional: robot arm, controller, all cabling and teach pendant. Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. Brand: FANUC Type: M-900iA/260L Controller: R-30iA Payload: 260 kg Kwsdsp T Umqjpfx Ab Tjw Reach: 3.1 m General purpose: Heavier Payload Long Arm Robot mass: 1800 kg Delivery time: In mutual agreement IRS Robotics® refurbished: 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL colour. Includes Accuracy Status Measurements (repeatability, accuracy, backlash) About: Our daily trustful business is delivery of refurbished A-Brand robots: ABB – KUKA – ABB – YASKAWA. Est. 2002. We ship worldwide.

Condition: new, *Technical standard specification: Kwedpoftm Hrsfx Ab Tew Heating capacity: 9 kW Cooling capacity: 50 kW medium: water up to 160°C Max. external volume: 16 ltr at 160°C max. Flow rate 57l/min  max. Delivery pressure 6,0 bar Dimension L x W x H 780 x 305 x 705 mm Weight approx. 80 kg HIGHLIGHTS EQUIPMENT: - Smart Controller Plus 7" touch / 4.0 capable - Flow measurement, adjustable flow alarms - Return temperature display - Frequency converter for pump speed control with automatic mode for energy-optimised operation, or adjustable flow rate (in the operating range of the temperature control system) - Electronic pressure transducer in the flow - Interface via 9-pin D-Sub connector 20mA/TTY - Connection for external temperature sensor PT 100 for measuring and displaying the mould temperature - Continuous bypass of the heat exchanger with a 3-way valve to reduce deposits in the heat exchangers - More powerful pump, hydraulic parts made of VA, magnetically coupled - Tool emptying by suction - Booster pump for tool filling at high temperatures - Filling via cooling water can be switched to separate filling - SSR for heating control - IP54 splash water protection Visit our website for more details or for other performance classes. *This unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.