CNC turn-mill center

Spinner TTC300

Condition: excellent (used), Year of construction: 1999, Fanuc 21T control system Turning diameter 158 mm Swing over bed 340 mm Speed 6,000 rpm 8-station turret Tailstock 3-jaw chuck, 2-jaw chuck, collet chuck Collets Lslhcdwowmzhpoujrg Various tool holders

Condition: new, Year of construction: 2026, The ERBA Turbo 60 is a centrifugal finishing machine designed for deburring, smoothing, and polishing small to medium-sized workpieces. The machine features a digital process timer, a digital speed display, and a dosing pump (wet configuration). The turntable speed can be adjusted via a frequency converter. The Turbo 60 is available in both dry and wet configurations and can be ideally linked with the ERBA YE-60 separation unit shown in the images. Lolhcdsn Ut Ilewujrg Technical data: - Gross volume: 60 liters - Drive power: 3.0 kW - Turntable speed: 75 to 300 rpm - Optional equipment: tilting motor, soundproof cover, or separation box All prices are net, plus the currently applicable statutory VAT and shipping costs. The images may depict the machine with optional accessories, which are available separately and subject to additional charges. If you are interested, we look forward to hearing from you. We are happy to advise you without obligation. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This listing serves solely as an online presentation of our goods. Contract negotiations take place via telecommunications (email, telephone, messaging portal). As an initial step, we will send you a non-binding offer, which will also provide details of our general terms and conditions with legal notice and your right of withdrawal before a purchase/contract is concluded.

Condition: good (used), Year of construction: 2004, Comm. no.: Lg 34522 high performance punching press HAULICK+ROOS ROS 500 - 1250 used, in good condition year of construction 2004 (without sound insulation cabin) with - infinitely variable drive - 2 connecting rods power unit - pneum. Clutch-brake combination - stroke adjustment - screen control Siemens PC 670 - oil circulation lubrication Technical data Pressing force max. 500 KN Lrslhcjip Uqmsdwujg Stroke rate 30 to 900 min.-1 stroke 12 to 60 mm Installation height (max, stroke un U.T.) 320 mm column width 1.250 mm Table area 1.250 x 730 mm Drop-through opening in table 1,160 x 140 mm ram area 1.250 x 450 mm ram adjustment 60 mm Drive power 26 kW Weight approx. 11,000 kg Dimensions (L x W x H) approx. 2,800 x 1,300 x 3,250 mm Equipment and accessories: Servo roll feeder VAMCO SP 150 Year of manufacture 2014 Passage width max. 150 mm Material thickness max. 3.0 mm

Condition: excellent (used), Year of construction: 2018, Tool holder VDI 30 Tool turret with 12 stations Main spindle speed: 5,000 rpm Drive power: 16.5 kW Including bar feeder Lrjlhcex Nnbhedwuog Including documentation

Condition: used, Year of construction: 2015, controller manufacturer: Hurco, controller model: MAX5, _____ Description: Year of manuf. : 2015 Control : Hurco MAX5 Speed : 10000 rpm Movement X/Y/Z : 762/508/610 mm Tool holder : SK 40 In General: Year of manufacture:2015 Control system:Hurco MAX5 Travel X/Y/Z:762/508/610 Speed:10,000 rpm Spindle: Technology:Belt spindle Speed:10,000 rpm Tool holder:SK 40 Work table: Clamping surface:1,020 x 510 mm Maximum table load:1,300 kg : Tool magazin: Technology:Drum magazine Tool changer:Double gripper Number of stations:24 Max. tool diameter:81 (120) mm Max. tool length:300 mm Equipment: Lrjlhcdexz I A Hswusg Chip disposal:Chip conveyor Coolant supply:Internal coolant system NC rotary table:4th axis (A-axis) Tool magazine:30 stations Tool measurement:Renishaw measuring probe

Condition: used, Year of construction: 2011, bar material dia. 32 mm spindle passage 38 mm turning length 320 mm turning speeds 8000 U/min c-axis 0,001 ° Grad gripping station 32 Lrelhcdwjw Ed Tfjujg turning length 150 mm turning speeds 8000 U/min c-axis 0,001 ° Grad number of tools 4+7+6+10 =27 number of milling stations 4+4 control Mitsubishi M70 Number of axles 5+2x C Achse 7 St. chip conveyor ja/yes LNS total power requirement 7,5/5,5 kW weight of the machine ca. 3300 kg dimensions of the machine ca. 2,5 x 1,2 x 1,82 plus FMB m swiss type machine Citizen A32-VIIPL,built 2011, with Barloader FMB Turbo 3-36, Excellent conditions. Main spinle motor and spindle bearing are new. Attachment: all comes with. It is the only one in the production.

Condition: excellent (used), Year of construction: 2015, Roll pressure infinitely adjustable from 240 kN feeds - fine adjustment 0,5-45 mm/min turning speeds 0-80 U/min Swivel angle of the roller heads 11 ° Diameter of the roller spindles 69,85 mm Stroke - Roller screw slide 0-150 mm min. dist. - roller screws 138 mm max. dist. - roller screws 285 mm min. diameter - Rolling tools 230 mm max. diameter - Rolling tools 135 mm min. dia. 2 mm max. diameter 55 mm thread length at plunge operation 200 mm thread length at continiuous operation 2000 mm maximum thread pitch 4 mm total power requirement 14 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 2,0 x 2,5 x 1,9 m Rolling time continuously adjustable from: 0.1s Pause time continuously adjustable from: 0.1s Rolling spindle length: 200mm Machine bed height: 810mm Lrjlhjxukrqjcdwusg Rolling spindle height above machine bed: 200 mm Height of support bearings: 115 mm Largest pitch for serrated teeth: 2.5 mm (up to 70 kg/mm2 Strength of the material)

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Lrolhcdjw Ucyuswujg Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Double spindle CNC lathe with 2 spindles, 3 turrets and 3 Y axes each turret with 15 stations, BMT 44 driven tool holder 2x C-axis 3x Y axis Fanuc 32i -TB control Bar passage 65 mm Left spindle 15/11 KW, Hainbuch Spanntop mini Axle pull size 65 Right spindle 11/7.5 KW, Kitagawa three-jaw chuck Finished part gripper Conveyor belt Bar loader interface Coolant system, separate tank 200 l Cooling unit High pressure on turrets 1-3 via M function 15 bar/40 l/min 2x Brinkmann pump Renishaw tool measurement for all turrets Tool monitoring for spindle and AGW Spindle flushing through the counter spindle IKZ, Deublin Rotary distributor Hinged belt conveyor Transformer available immediately Lelhcdjvxu Eaowujrg

Condition: good (used), Year of construction: 2002, TRAUB TNL 12/7 CNC sliding headstock automatic lathe TECHNICAL DATA Bar capacity: 12 mm Main headstock strokes: 130 / 80 mm Spindle power: 4 kW Speed, main spindle: 12`000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max diameter, counter spindle: 12 mm Speed, counter spindle: 12`000 rpm Dimensions: 2850 x 1100 x 1480 mm Lrjlhcdwst E Dbyousg SCOPE OF OFFER U.A: (list not exhaustive): Traub TNL 12/7 CNC lathe Meyrat high-frequency spindles, 2 pieces Tool holders (driven and non-driven) FMB Minimag 3200 C bar loader Hydraulic unit High pressure pump Chip conveyor Exact scope of supply according to photo gallery No responsibility is taken for the correctness, completeness and up-to-dateness of the information.