Horizontal Milling Machine

Steinel SH 3,5

Condition: used, Year of construction: 2001, dimensions of the machine ca. 1450 x 1560 x 2620 mm weight of the machine ca. 1,8 t The machine frame is a solid welded construction. The cooling oil tank is located in the machine bed. The cross table is made of cast iron, guideways are ground and scraped with adjustment strips. The shaper head is also made of cast iron, the guides are ground and scraped, Bsdswbi Awspfx Agcodk with lubrication grooves. The push head can be swiveled +/- 20 degrees. Stroke adjustable through side opening. Tool is positioned at the longitudinal stop. The machine has a mechanical stroke drive. The control for the CNC dividing head is housed in the control panel. The zero point can be set in any position of the dividing head and with the division options of 2-999 symmetrically and 99 divisions asymmetrically. Machine color: Green Color dividing head: red --> Digital operating instructions available in German + English

Year of construction: 1990, condition: used, pressure 75 t throat 300 mm stroke 8 - 110 mm table surface area 750 x 600 mm ram adjustment 75 mm ram surface 430 x 230 mm Bdjdpfx Agod Nl E Ujcjk hole in the table 250 x 150 mm tool hole in ram 40 mm no. of strokes 60 + 90 Hub/min weight of the machine ca. 4,4 t total power requirement 4,5 - 6,8 kW dimensions of the machine ca. 1,95 x 1,1 x 2,35 m distance table/ram Hub unten, Stöß. unten 19 mm distance table/ram Hub oben, Stöß. oben 380 mm Furnishing: - with hydraulic clutch-brake combination, with new hydraulics and oil cooler - with gear transmission in oil bath - fixed table prepared for the attachment of tool changing consoles - 2 roller bars in the table - mechanical overload in the ram The following work is carried out on the machine / partial overhaul: - Machine is completely disassembled, checked, seals changed, defective parts exchanged etc - Machine is repainted - new Balluff cam control - new hydraulic unit with oil cooler for the clutch - new Vogel central lubrication - new control cabinet with touch panel and ABB safety control - Current UVV test with braking time measurement

Condition: used, machine/vehicle number: 0001210226, pattern table size: 236 x 460 mm working table size: 200 x 500 mm Bdedpfx Aobv S Elogcek working area longitudinal: 300 mm working area cross: 160 mm spindle turning speed range: 1900 - 15000 rpm milling proportion: 1 : 1 105x165/1 : 5 44 x 80 mm space needed: 800 x 900 x 1250 mm weight: 340 kg

Condition: new, functionality: fully functional, Year of construction: 2026, Vertical Broaching Machine VADARI GmbH Type SRM 2026 - 60 kN - New Machine - BROACHING MACHINES MADE IN GERMANY ==> New machines ordered this year currently available on special terms! ==> A fully refurbished used machine will soon be available as well. Please inquire separately. ==> ==> Information for manufacturing companies and dealers with in-house production: Drawings, rights, spare parts, customer and prospective buyer data, as well as planning and production documentation for the broaching machine (including plans for a 9-ton pulling force variant) can be acquired from us, if desired. Please contact us if interested. ==> Our new machines are custom-built to order. Short-term manufacturing and delivery possible. ==> Currently, spare parts such as spindles and spindle nuts for Wolff SRM and VADARI SRM broaching machines are available for immediate delivery. Cost-effective and extremely robust vertical broaching machine designed for long-term use. Broaching tools (including special broaches for internal splines, etc.) and accessories available on request. Please inquire separately. All broaching tools and tool holders from other manufacturers may be used on our broaching machine! Complete manufacturing and assembly at our factory in Germany. Short-term delivery available by arrangement. Additionally, we offer spare and wear parts (spindles, spindle nuts, motors, gears, as well as all other required components including electrical parts) for both Wolff and VADARI SRM broaching machines. Bedpeuqbnhjfx Agcodk Vertical Broaching Machine Type SRM 2026 - NEW MACHINE: The primary application is the production of keyways from 3-28 mm and profiles of similar dimensions. Due to its compact and space-saving design, the machine is suitable for successful use in small, medium, and large workshops. The low purchase price justifies investment even for small batch series and custom production. Drive is via a pole-changeable geared brake motor. The maintenance-free dual-spindle drive ensures smooth operation and a central pulling point with constant cutting force. The open tool table allows even large workpieces to be accommodated without restriction. In most cases, workpieces do not need to be clamped securely. Stroke adjustment is by adjustable end switches with stroke limitation. For short hubs/workpieces, several parts can be stacked. Broaching needles, mandrels, and spare parts available at attractive conditions upon request. Technical Data: Pulling force: 60 kN at 3m/min, 40 kN at 6m/min. Broaching speed: 3m/min & 6m/min (Optional: stepless speed control from 0 m/min to 6m/min available with advanced electronics) Return speed: 6m/min Stroke: 1050 mm Broaching tool length: 1200 mm Workpiece diameter: unlimited Worktable: 450 x 350 mm Table opening: 140 mm Weight: approx. 510 kg Floor space: 750 x 570 mm Total machine height: 1510 mm Motor power: 3.7 / 4.4 kW Electrical equipment: 400 / 230 Volt 50 Hz Control voltage: 230 Volt Operating voltage: 400 Volt 50 Hz Finish: Exterior RAL 7035/7036/7016, interior RAL 3000 or custom Safety door: Standard equipment Coolant system: Standard equipment The machine complies with the current Machinery Directive and carries CE certification.

Condition: ready for operation (used), Year of construction: 1970, LZ-Lathe KERN Type:DS 20 AL Year 1970 with 3 jaws lathe chuck Forkardt 250mm, tool quick winder holder Multifix size C with holders coolant device. turning diameter overbed:500mm turning diameter overplane : 250mm centre distance : 1000mm spindle speed: 12 -1200U/min Bdsdpfx Aogqxcijgcjk Machine can be demonstrated under current Good guides .

Condition: new, WM180V - ROGI vario metal lathe 230V-1Phase Turning diameter above bed ----- 180 mm Turning diameter above cross support ----- 110 mm Center height ----- 90 mm Center distance ----- 300 mm Bed width ----- 100 mm Cross support travel ----- 75 mm Reverse motion of tool support ----- 55 mm Permeate main axis ----- 21 mm Main shaft connection ----- MK3 Speed range spindle ----- variable 50 - 2500 rpm Thread cutting withworth ----- 10 - 44 TPI (8) Thread cutting metric ----- 0.5 - 3 mm (10) Travel pinole ----- 60 mm Diameter pinole ----- 30 mm Pinole fitting ----- MK2 Motor power ----- brushless 600 Watt Weight ----- 60 kg STANDARD ACCESSORIES * 3 chuck 100 mm - self-centering * 4-way chisel holder * Drip tray * Back panel * Shielding chuck * Shielding spindle * Chisel support shield * Set of casters Bdsdpfx Asga T Ebogcjk * Digital speed readout * Fixed centers * Left / Right switch * Tools in a box OPTIONS * Independent 4-jaw chuck 100 mm * Flange for 4-jaw chuck 100 mm * Fixed glasses * Moving glasses * Fixture plate 170 mm * Support box * TOOA0 quick-change chisel holder * Rotating chisel set

Condition: repair required (used), Machine number: 1464 TyP / Model: FUW 250/IV travel x-y-z: 400 - 220 - 400 mm table: 630 x 350 mm table clamping surface: 700 x 300 mm speed range: 45 to 2.240 rpm spindle mounting: SK 40 feed range longitudinal: 6,3 to 1.250 mm/min feed range cross: 6,3 to 1.250 mm/min Connection: 7.4 kW accessories/equipment: vertical head Condition: 2 controllers defective Note: machine repair EUR 2.000 weight: 1,45 t Bdodod Hl Stspfx Agcek dimensions: 1.500 x 1.600 x 1.800 mm

Condition: excellent (used), Year of construction: 1986, travel distance X-axis: 300 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 290 mm, Year of manufacture: 1986 Travel paths: Bedpfx Ajwgafysgcjdk X = 300 mm Y = 160 mm Z = 290 mm Equipment: Standard accessories Vertical milling head, SK 40/20x2 Fixed angle table 210 x 600 mm, NEW! Retrofitted safety device for milling spindle, electrically protected, NEW! Active digital display (TNC113), 3 axes Coolant system Machine light Machine feet Documentation Condition: Good, mechanics and control system workshop-tested

Condition: good (used), Year of construction: 2000, Manufacturer: KUKA Tip: KR 350/2 Year of manufacture: 2000 Net weight: 1870 kg Without cable and control cabinet. Bdsdpfxoh Dwr Us Agcok Addendum to the measurement report!

Condition: used, functionality: fully functional, Locatelli Ariete 3 automatic lathe machine Length of scantling max/min 1000/200mm Scantling size max/min 85×85/20x20mm Maximum workpiece length 120mm with hole 150mm without hole Bedpfx Aju Rqkmjgcsdk Automatic material feeder Complete DTR documentation 3/4kw main motor Two spindle speeds 2500/3600rpm Oil pump motor 2.2kw Working pressure 6-8bar