Vertical panel saw

Striebig 6220A Standard III

Year of construction: 1993, condition: ready for operation (used), Max. cutting depth: 80mm, cutting area: 5300x2200mm, length: 6665mm, width: 3015mm, height: 1810mm, weight: 840kg, with documentation. Fpsdpopcgy Hefx Aarod

Condition: good (used), Truck crane Renault 270 DCI 19 tonnes Year : 2002 470.000 km Echange standard engine done at 250 000 km Crane capacity : 5,5 tonnes Technical check : OK Pas de télécommande de la grue Fpjdpfx Aorhzy Hjarjd

Condition: used, Year of construction: 2001, Used STRIEBIG STANDARD III type 6220A vertical panel saw maximum cutting area: 5300 x 2200 mm Fodpfsxyyh Esx Aarspd blade diameter: 300 mm (min. 290) motor power: 4.4 kW motor speed: 4750 rpm CE compliant

Condition: good (used), Year of construction: 2011, Fully automatic wood infeed with feed roller conveyor Fpodpfx Aaewuppwsrjd Extension of transverse feed conveyor and feed roller conveyor for timber lengths up to 13 m Transverse loading and feed conveyor Under-table swing cross-cut saw Universal 4-axis milling unit (UF4) Combination support for vertically operating tools Drilling unit 2.2 kW Combination support for horizontally operating tools Drilling unit 2.2 kW Longitudinal and transverse grooving mill Marking device at the rear (stop side) Fully automatic beam turning station – hydraulic Transport and positioning device "two-hand system" Electronic control with EKP software Roller conveyor for wood outfeed incl. extension (without drive) Component ejector 5-arm wood rack Safety devices and protective guards

Condition: like new (used), functionality: fully functional, machine/vehicle number: ZCFC635C805516960, mileage: 80,000 km, power: 132.39 kW (180.00 HP), first registration: 01/2023, fuel type: diesel, maximum load weight: 750 kg, tire size: 195/75 R16C 110/108R, wheelbase: 4,100 mm, energy efficiency: D, color: white, emission class: euro6, number of seats: 3, loading space length: 4,100 mm, loading space width: 2,100 mm, loading space height: 400 mm, Year of construction: 2022, number of previous owners: 1, Equipment: ABS, air conditioning, airbag, all-season tires, central locking, crane, cruise control, fog lights, onboard computer, power assisted steering, soot filter, Serviced exclusively at authorized IVECO workshops. Available for test drive. Warranty from 12 to 48 months at advantageous rates. Euro 6D HI-MATIC 8-speed automatic transmission 3 seats in the cab Driver airbag Suspended and heated driver’s seat Manual air conditioning Fog lights Bluetooth DAB car radio with steering wheel controls Adaptive cruise control Fodpfx Aaew Ducuorjpd Assisted braking system Fixed body Copma 35.3 crane with 3 hydraulic extensions Front pole carrier stand Removable rear pole carrier stand Winches for cable tensioning Reinforced leaf springs

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements Fodpforgzv Nox Aarepd * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: excellent (used), mileage: 117,563 km, fuel type: diesel, color: red, lifting height: 36,500 mm, first registration: 05/2015, mast type: telescopic, Year of construction: 2015, = Additional Options and Accessories = - PTO = Further Information = General Information Intended use: Construction Technical Information Number of cylinders: 6 Engine displacement: 6,374 cc Drive: Wheel Dimensions (L x W): 1,103 x 255 cm Functional Mast length: 35.2 m Lifting capacity: 40,000 kg Body brand: TADANO ATF 40G-2 CE marking: yes Condition Technical condition: very good Optical condition: very good TADANO ATF 40G-2 CRANE UNDERCARRIAGE: 279 HP 4x4 drive 117,563 km Automatic transmission Air conditioning Refrigerator Tyre size: 445/95/R25 MERCEDES-BENZ OM 906 LA engine SUPERSTRUCTURE: Heating 3 RASIER wooden blocks 20T Fpedpfx Aouxu Dysarsd 1 RASIER wooden block 10T Min / Max boom length: 10.5 m / 35.2 m Max lifting capacity: 40,000 kg Maximum hook height: 36.5 m Full counterweight All documents and papers available CE certificate FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 11441, At the moment we are working with the following version: 9.23.12.102733-12 The equipment of the K2: a 4-axis universal milling machine 2 drilling rigs a finger cutter below a slotter Hydraulic beam turning station Machine is fully working, can be visiited upon agreed time. avaible from 30/11/2025 Disassembly from our company and loading to truck, and is included in the price. Sale is as a used machine with exclusion of any warranty. Fpedpfx Aewvih Ajarod

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Hundegger Speed Cut SC1 CNC 2005 vintage, in good technical condition, looking for a new owner. Excellent for the production of nailed sheet metal roofs. Fpjdpfx Aoxftaljared Videos show the machine in operation.

Condition: used, mileage: 206,000 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,000 kg, first registration: 04/2016, next inspection (TÜV): 02/2027, emission class: euro6, color: white, number of seats: 9, Year of construction: 2015, total length: 4,963 mm, total width: 2,050 mm, total height: 2,254 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, 2nd owner since 2018. German minibus. Only original 206,000 km. TÜV (roadworthiness certificate) valid until 02/2027. In 2025, €2,000 were invested in this Citroen Jumper, including: - Rear brakes NEW, parking brake partially new - Rear tyres NEW (all-season tyres) Fedpfxov I Idbs Aaropd - Front tyres as-new (all-season tyres, DOT 17/2024) Last service in November 2024. Auxiliary heater (functions well). Air conditioning. 9 seats. Radio system. Central locking with remote key. ABS. ESP. Electric windows and exterior mirrors. Unladen weight: "2025-2293 kg" as per vehicle registration certificate. Gross vehicle weight rating: 3,000 kg. Standard registration as "vehicle for passenger transport up to 8 seats / multi-purpose vehicle". Original COC (Certificate of Conformity) document available. Euro 6 emissions standard. 6-speed manual gearbox. The Citroen drives powerfully and very well. This offer is valid only for businesses, freelancers, farmers, forestry operations, and comparable legal entities. Sale to purely private individuals is strictly excluded. Subject to prior sale and errors at any time. Net price: €10,500. For export, we reserve the right to initially retain a deposit equal to the statutory 19% VAT until receipt of the final export confirmation (the export document or confirmation of arrival).