Guidance and lathe

TC 165 V MIOTAL®

Year of construction: 1963, condition: used, functionality: limited functionality, machine/vehicle number: 512804, 1963 Bobst SP900E with double action stripper in reasonable/good condition. Well-maintained.. in recent years for example sprocket wheels, main gripper chains, counterplate under cuttingplate, cardan joints to the feeding head, have been renewed (original Bobst parts) Gripperbars have not been renewed recently, they are still in quite a good condition. Dedpetyqizsfx Agnecb The knee joints have almost no signs of wear. they were probably at some point and the machine has not been used much since then. There is hardly any screech on them. Machine is dismantled in our storage in the South of The Netherlands, dismantled and not under power. For seriously interested potential buyers we will further upgrade the machine and assemble it and give the possibility to test it inevery way they want. In that case price will be 22,000 euros, loaded on to your transport, EX SITE

Condition: new, Year of construction: 2025, CORMAK HBS320 band saw for metal provides cutting at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Band saw perfect for cutting tubes, profiles and other materials. Machine characteristics CORMAK HBS320 band saw for metal provides cutting at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Band saw perfect for cutting tubes, profiles and other materials. Operator starts the machine by pressing the START button and sets cutting speed. After the cycle is finished the machine automatically stops and the operator lifts the arm to the starting position. The band saw arm is made of massive, uniform cast iron, and together with 27 mm wide cutting band enables high quantity cutting of structural steel, stainless steel and tools. The vice is located in an adjustable bed and equipped with a quick clamp. Blade guides are equipped with a ball bearings system and cemented carbides, ensuring excellent cutting precision and straight cut. It has a huge impact on the band guiding, its durability, accuracy and cutting quality. The carbide guiding drastically reduces the wear of both the machine and the blade. The base is enclosed, constituting a rigid welded body of steel sheets. A separate flood coolant container with an electropump is inside. The shape of the base upper part constitutes a tank for flood coolant draining and chips produced during cutting. Cast iron workbench is attached to the base, with a double-sided swivel arm and a control panel. The feed speed is controlled by the control panel. There are 2 cutting band speeds: 44 and 88 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Ø max 260 mm /perpendicular cutting H×B max 320×160 mm /perpendicular cutting Power supply - 3–phase, 400V Total power - 1,5 kW Arm lowering control - hydraulic cylinder Band dimensions - 2740×27×0.9 mm Band speed - 44 / 88 m/min Vice base height - 920 mm Dimensions - 1400×880×1550 mm Weight - 280 kg Cutting parameters Angle 0º ---- ø260 320×160 255×255 45º R ø210 210×200 210×210 60º R ø135 135×130 130×130 45º L ø160 220×130 160×160 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website. Dcsdji D Dgwopfx Agnjb

Condition: used, L + Z Lathe WEILER Type LZ PRIMUS GS Machine no. No. 2461 Year of construction approx. 1990 Center width 400 mm Turning diameter over bed 250 mm Center height above bed 125 mm Turning diameter over support 140 mm Center height above support 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm 18 steps Dodjrtd Uwjpfx Agnscb Feed lengthwise and flat Chuck flange short taper DIN 55022 size 4 Inner tailstock taper MK 2 Drive power 1.1 kW and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw lathe chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change tool holder with 1 interchangeable cassette - Set of collets Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centering tip for collet chuck holder - Emergency stop - Hinged chuck guard - Splash guard - Machine light - electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg good condition

Condition: used, Year of construction: 2018, operating hours: 3,000 h, power: 130 kW (176.75 HP), front tire size: 600/65R28, rear tire size: 650/75R38, Equipment: front power take-off, Speed: 40, lifting roof, rotating beacon, / reversing gear, diesel, hydraulic system (2 / circuit), GPS system (receiver), / front PTO external control / _____ / continuously variable transmission / cab: Premium Comand / incl. RTK / / IMechanical U Dcedpfx Aeqrrmmognsb

Condition: new, turning diameter 420 mm turning length 1500 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 590 mm centre height 210 mm Turning length in the bed bridge 260 mm reus 16 (45-1800) U/min tail stock MK 4 quill stroke 120 mm diameter of quill 50 mm spindle taper DIN ISO 702-2 Nr. 6 spindle bore 52 mm spindle cone MK 6 feed längs 17 / 0,05 - 1,7 m/min feed plan 17 / 0,025 - 0,85 m/min total power requirement 4,6 kW weight of the machine ca. 1340 kg dimensions of the machine ca. 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath Djdok Egrpjpfx Agnocb - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: used, Round-tub vibratory finishing machine WALTHER TROWAL Type CLS-230 Order No. 05.833/00 Year of construction 1969 Tub diameter 1100 mm Total tub height approx. 650 mm Working container / Gross volume max. 230 liters Usable volume approx. 115 liters Speed 1100 to 1800 rpm, stepless Motor power 7.5 kW Power connection 400 Volt, 50 Hz - Operating cycle manual and via timer - Stepless motor speed adjustment via variator gearbox - Manually adjustable eccentric imbalance weights - Container with polyurethane lining – lining partially damaged or worn - Sound-insulated lid Dodpsfqpxijfx Agnjcb - Manual separation flap - Built-in screening device after the separation flap - Liquid connection - Material discharge opening 180 x 150 mm - Control cabinet for wall mounting - Baffle lid with perforated screen Space requirement with base L x W x H 1800 x 1750 x 1700 mm Net weight approx. 1800 kg In good condition Function description: Workpieces and abrasive media are set in motion by the generated vibration and are recirculated extremely gently. The constant relative movement between workpieces and abrasive media results in deburring and surface finishing of the workpieces.

Condition: excellent (used), Vertical band saw JAESPA type MSU 4roller diameter 420 mmoutreach 400 mmtable size 615 x 615 mmcutting height 350 mmsaw blade length min. 3450 - max. 3640 mmsaw blade speed 20-2500 m/min. stepless mains connection 400 volt, 50 Hz - stepless saw band speed over 2 motor speeds, 2 gear stages and stepless belt drive - saw table swivelling - 2 gear stages - saw blade butt welding machine IDEAL BS 0-16- saw blade shear - grinding stone for grinding the weld seam space requirement L x W x H 1100 x 950 x 2000 mmWeight approx. 700 kgsehr good, immediately operational condition2 identical machines in stock Djdped Tx D Uefx Agnecb

Condition: new, OPTIMUM OPTIsaw S275N metal band saw - Exhibition machine - Feed infinitely adjustable, tiltable ----- Technical data ----- Swivel range: 0 - 60 °, Cutting height: 150 mm, cutting depth: 230 mm, Saw blade speed: 45 / 90 m/min, Saw blade length: 2,480 mm, Motor 400 V: 1.1 kW, Dimensions (LxWxH): 1,400 x 530 x 1,360 mm, Weight: 185 kg Dcsdeu R S Hpepfx Agnjb - new exhibition machine -

Condition: used, Year of construction: 1976, turning diameter over bed 0560 mm turning diameter over slide rest 350 mm turning length 1500 mm spindle bore 65 mm Dedpfxot Tqgxe Agnocb spindle turning speed range 16- 1250 U/min feeds - longitudinal 0,050-24,0 mm/U feeds - cross 0,039-18,86 mm/U total power requirement 9 kW weight of the machine ca. 4,5 t

Condition: new, Year of construction: 2025, For current prices and delivery times, please contact us. Dimensions and weights: Length (product): approx.4450mm Width/depth (product): approx.1150mm Height (product): approx.1650mm Weight (net): approx.3000kg Working ranges: Center height: 280mm Center width: 2910mm Dcedpjq Ukc Rsfx Agnob Circumferential diameter over machine bed: 560mm Circumferential diameter in the bed bridge: 790mm Swing diameter over cross slide: 355mm Turning length in the bed bridge: 170mm Bed width: 350mm Speed range: Number of speed ranges: 12 Speed range: 25 - 1600min¯¹ Electrical data: Drive motor power: 7.5kW Supply voltage: 400V Mains frequency: 50Hz Cooling lubricant system: Cooling lubricant system Coolant pump output: 125W Spindle: Spindle holder: Camlock DIN ISO 702-2 No. 8 Spindle bore/bar passage diameter: 80mm Steel holder mounting height: max.25mm Spindle cone: MK 7 Tailstock: Tailstock holder: MK 5 Tailstock quill stroke: 180mm Tailstock quill diameter: 75mm Pitch: Pitch metric: 0.2 - 14mm/rev Number of leads metric: 47 Pitch inch: 112 - 2Gg/1" Number of pitches inch: 60 Pitch Diametral Pitch: 4 - 112DPI Number of pitches Diametral Pitch: 50 Module thread pitch: 0.1 - 7mm/rev Number of module thread pitches: 34 Travel distance: Top slide travel: 130mm Travel of face slide: 316mm Bed slide travel: 2710mm Feed rate: Feed range longitudinal: 0.059 - 1.646mm/rev Number of longitudinal feeds: 35 Feed range flat: 0.020 - 0.573mm/rev Number of feeds flat: 35 Electrical connection: Total connected load: 8.5kW