Milk & dairy production

TETRA PAK VOLUME CHANGE KIT A3 FLEX 200/250 SQUARE

Year of construction: 2006, condition: used, Gaemmeler KL 540 Compensating Stacker with attached blocking device VM 500 The compensating stacker KL 540 is equipped with the proven Gaemmerler LiftPack technology. The KL 540 is suitable for bundle heights up to 300 mm. Nummerous options allow to meet the individual customer requirements. Condition: cleaned and ready for production Technical Data: Cycle time ≥ 1,5 sec. (depending on the copy) ≥ 1,2 sec. with Servo pusher (depending on the copy ) Pagination 4 – 96 Heatset / Gravure Formats A 105 – 330 mm (with rear-eject 105 – 310 mm) B 140 – 500 mm D max. 560 mm Layer height max. 200 mm Bundle height Kfodpfx Agsh Nrh Uezja max. 300 mm Weight: 1.500 kg approx. Gaemmerler VM500 blocking unit Cycle time: (approx. 6.7 sec) per pack with a pack height of 300 mm and a blocking time of 2 sec. The cycle time per pack increases when the blocking time is increased and the pack height is reduced. The cycle time is also strongly influenced by the output speed of the compensating stacker and thus by the product (surface, format). Sizes: Width: 140 to 500 mm - 5.5" to 19.7" Length: 105 to 330 mm - 4.13" to 13" Pile height: 55 to 400mm - 2.16 to 15.7" Inlet height: 890 mm - 35" Outlet height: 890 mm - 35" Connected load: 16A (2KW, 380/480 Volt, 3 phases, neutral) Air requirement: 1000 standard l/min, 6 bar; unoiled, dry air Weight: approx. 500 kg

Condition: good (used), functionality: fully functional, Used machine in very good condition, was in operation last year. Kfodpfx Ajvr E Edogzea

Condition: used, Year of construction: 1992, Overview This blowmoulder was built in 1992 from French manufacturer Sidel. It can produce up to 4.000 bottles per hour. Techn. Details Capacity: 4.000 bph 4 cavities Scope of delivery Blowmoulding machine | SIDEL | SBO 4/6 | 1992 Preform feeder Two types of molds for 1.5 L and 2.0 L bottles Cooling unit: RIEDEL Ksdpfxsnpbhvs Agzofa

Condition: excellent (used), Brand: KENT Model: KGS-250AHD Type : Tangential Work surface 460x200 mm Longitudinal course 540 mm Cross course 260 mm Distance form center to table 490 mm Max. Weight on the table including magnetic chuck 103 for series 250 kg 150 for series 818 kg Slote in T 14x 1 mm/N Longitudinal table speed 5- 23 m/min Crank cords feed 1 gra 0,02 mm - 1 rev 4 mm Automatic traerse feed per pass 0.1 -5.5 mm Automatic advance 50 Hz- 820 mm /min. - 60Hz 980 mm/min Wheel size 180 x 13 x 31. 75 mm Spindle speed 50 Hz 2850 rpm - 60 Hz 3480 rpm Upright crank 1 gra 0,01 mm - 1 rev 2 mm Kfodpfx Agoh Ha Ipezea Automatic feed increment 0,002- 0,02 mm Spindle motor 2 x 2 HP X P Hoist motor NA kg x cm Hydraulic motor pump 1 X 6 HP X P Drain motor 1/8 X 2 HP X P Transverse agace engine 1/5 x 6 HP X P Machine height 1775 mm Machine dimension 3260 x 2460 mm Net weight 1300 kg Gross weight 1500 K

Condition: good (used), functionality: fully functional, 4 Pierre Guérin mixing tanks for cheese with a capacity of 1,800 litres. The loops are removable. They have a tilting system for emptying. Kodpfx Aoq T R S Regzofa

Condition: new, Year of construction: 2023, total height: 1,850 mm, warranty duration: 12 months, input voltage: 380 V, power: 1.5 kW (2.04 HP), 1000L stainless steel mixer . All tanks are made to order . It is possible to make mixer from 100 to 3000 liters . We make : Mixers , Heaters , Pasteurizers , Cheese boilers and others . The given price is an example . Kfodpfoqqhzfex Agzoa

Condition: used, Crossbeams: 2700x120x50 mm – 63 pieces 2700x120x50 mm – 1 piece 1800x100 mm (ideal for chipboard): 1 piece Frames: 5200x1000x95 mm – 17 pieces 4600x1000x90 mm – 4 pieces 2300x1000x95 mm – 2 pieces If you require racks or accessories in other configurations or designs, please contact us. Kedsh Izr Uopfx Agzefa We offer a comprehensive range of new and used racking systems as well as accessories and are happy to support you with your planning. Additional accessories such as: Frame, corner and collision protection, push-through protections, chipboards, wire meshes, rear wall grids, and depth supports are available. Shipping: Please inquire about shipping costs, specifying your postal code, location, and the quantity of items required. Additional services: Planning, rack assembly/disassembly, purchase/sale Changes and errors in technical data, specifications and prices as well as prior sale reserved!

Condition: like new (used), Year of construction: 2024, functionality: fully functional, BRAND NEW COMPLETE KRONES CAN FILLING LINE Capacity: up to 90,000 cans per hour. Manufacturer: Krones Year of manufacture: 2023/2024 Condition: Brand new, unused, never installed, still in original packaging Availability: Immediate Electrical Voltage: 440 V Frequency: 60 Hz Products: Beer, Carbonated Soft Drinks (CSD), Non-Carbonated Soft Drinks (Non-CSD) Filling temperature: 4ºC Compatible Can Formats: – 355ml – 204/202 – 355ml – 204 Sleek – 330ml – 211/202 – 473ml – 211/202 Secondary Packaging Options: Kfedpfx Aexc E Rwegzea – Tray with film – Film only – Pad with film Pack Formats Supported: – 6 x 4 – 3 x 2 – 3 x 4 Pallet Dimensions: – 1240 x 1100 mm – 1200 x 1100 mm – 1220 x 1020 mm – 1080 x 935 mm Line Composition: - PRESSANT UNIVERSAL 1A Container Sweep-off Depalletizer - CANTRONIC 709 D Empty Can Inspector - MODULFILL VODM-C 4.320-150-90 Can Filler - CHECKMAT 731 FM-X Inspection Unit - Foam Cleaning Module - LINAFLEX LC33.0-573-31 Product Treatment Unit - VARIOPAC PRO TFS-8 Shrink Packer - MODULPAL PRO 1AD Palletizer - LINADRY S2M Container Dryer x2 - CHECKMAT 731 FM-X Inspection Unit - SYNCO S Container Conveyor - MULTICO S Pack Conveyor - PALCO S Pallet Conveyor - Can Lid Feed Unit - OMEGA Stretch Wrapper - SYNCO Conveyor Lubrication System - Container Coding/Dating Unit - SYNCO Can Vacuum-Assisted Conveyor Coder - SYNCO Can/Liner Rinser – Linear Rinser - SYNCO Drip Pan Pipework System - SYNCO Can Vacuum Inspection System - Pack Inspection System - VJ 1620 UHS Pack Coding/Dating Device - Pallet Labeller - Uninterruptible Power Supply (UPS) - Electrical Power Distributor - Infield Cable Ducts and Cable Trays - Internal Machinery Piping For further information or to arrange an inspection, please contact us.

Condition: reconditioned (used), Diosna SP 160 AD Spiral Mixer with 2 bowls - 2 timers, 2 speeds - 160 kg dough capacity - after refurbishment - 2 acid-resistant stainless steel bowls - perfect condition Kedpsw Hm Alsfx Agzsfa - possibility of part exchange with another machine

Condition: used, Year of construction: 2016, operating hours: 25,046 h, Used Blow Molding Machine KRONES Contiform C312 PRO Year 2016 Introducing the Blow Molding Machine KRONES Contiform C312 The KRONES Contiform C312 PRO blow molding machine, manufactured in 2016, represents the pinnacle in the bottling industry. Crafted by the renowned German company Krones, this model delivers reliable, high-quality performance to meet the most demanding sector requirements. Performance and Capacity of the Machinery Featuring a 12-cavity mold, the Blow Molding Machine KRONES Contiform C312 operates at a maximum speed of 27,000 bottles per hour (bph). This remarkable production speed ensures a steady, efficient flow, thereby optimizing processing times and maximizing productivity. Versatility and Adaptability of the Blow Molding Machine KRONES Contiform C312 Moreover, its ability to adapt to various product types, including square and round shapes, makes the Contiform C312 PRO highly versatile. This feature facilitates a wide range of applications in the bottling industry, offering operational flexibility and production diversification possibilities. Structural Solidity and Durability Weighing 25.0 tons, the machinery is built to withstand the continuous demands of the production environment. Its solid, reliable structure ensures long-lasting performance, consequently minimizing downtime and ensuring uninterrupted production. Efficiency in Material Handling Additionally, equipped with a tilter with a maximum capacity of 2.0 tons, the Blow Molding Machine KRONES Contiform C312 enables high efficiency in material movement and handling. This feature optimizes logistical processes within the company, thereby reducing loading and unloading times and enhancing overall operational efficiency. Advanced Technology and Optimal Performance Furthermore, the 150 kW blowing system ensures excellent material distribution, thereby guaranteeing the formation of perfectly shaped bottles free from defects. Additionally, the machinery is fitted with a 5 kW air conveyor and offers an air flow rate of 14㎥/h at 11°C and 1,100㎥/h, ensuring a constant, reliable flow during the production process. Ksdpfxevgu Eij Agzjfa Concluding Remarks on the KRONES Contiform C312 PRO In conclusion, the Blow Molding Machine KRONES Contiform C312 stands out as the ideal choice for those seeking a high-quality used blow molding machine. With its robust construction, reliable performance, and advanced technology, this model offers an efficient and cost-effective solution for the most demanding bottling needs.