Bench Drilling Machine

THIELICKE TB6L

Year of construction: 2008, condition: like new (used), Eillert MSD-500-V Salad spinner Serial: 188 2008, Stainless salad spinner, with three baskets, 1.5Kw, 3Ph Hnodpfjit I Diex Acqer

Condition: used, Year of construction: 1970, Weiler lathe with tailstock. Hodpfxjhtnu Te Acqsnr

Year of construction: 2016, condition: excellent (used), 1 used short bar loader Manufacturer: Breuning Type: ILS RBL 80/12 Year of manufacture: 2016 Clamping range: 5-80 mm diameter Length: 100-1200 mm Hodpfxoht Rl Es Acqonr

Condition: like new (used), Equipment: type plate available, Used stainless steel agitator tank on stainless steel pallet with rollers and propeller agitator Type: SBPA1000RWP Hedpfxsv Ha Uio Acqenr Article number: 10862 Volume: 907L Type: Upright design on stainless steel transport pallet with rollers Design: Single-walled, at least 2mm wall thickness Material (in contact with media): 1.4301 stainless steel Surface: Satin finish on the outside, BA (IIId) on the inside Inside weld seams: Pickled, passivated and brushed Operating pressure: Atmospheric Top: Central crossbeam with two hinged lid halves Bottom: Dished bottom with discharge bead Container dimensions: Container diameter: 1080mm Total height: 1915mm Total width: 1200 x 1150mm Distance from drain to floor: 400mm Height of feet: 240mm Equipment: 1x hinged lid, central crossbar with two hinged lid halves, stainless steel sheet metal grates below the hinged lid as protection against intrusion (removable), locking function (lids can be locked open) 1x reserve nozzle DN50 DIN11851 on the top floor 1x DN50 DIN32676-A Tri-Clamp ball valve as outlet fitting, PTFE seal 1x stainless steel transport pallet 4x swivel castors, 2x with brake 1x nameplate Agitator: Propeller agitator Suitable for viscosities up to 500mPas Make: Schwarzer Rührtechnik GmbH Type: SRT8-1500 Power: 0.75KW Speed: 1410 UPM Operating voltage: 3PH 400V -Solid agitator shaft attached to the agitator motor, not removable -Agitator shaft balanced for concentricity in Speed range -1 mixing propeller Ø 150mm screwed into the end of the agitator shaft. Mixing propeller made of cast stainless steel, highly polished -4x neoprene rubber metal buffers, motor mounted in a swinging manner, hardness grade 70 according to Shore, neoprene resistant up to 100°C Agitator control: CEE plug switch on the container, on/off switch, emergency stop, zero voltage release and phase inverter Continuous speed control of the agitator motor using a compact, external frequency converter, Optidrive brand. With digital display of the frequency or speed. Incl. potentiometer, on/off switch. Pre-programmed for agitator operation. Operating voltage 3PH 400V Mounted on the container on a stainless steel holder.

Condition: used, Heavy-duty wood lathe with hand copy attachment, sold by private owner with extensive accessories, fully equipped, some items in original packaging. Used, excellent condition, low operating hours. Make: Flott-Arnz. Centre distance approx. 1200 mm, centre height approx. 250 mm. Hand copying device with approx. 1000 mm copy length. Four-prong drive centre, live centre included. 5 spindle speeds: 500 - 2500 rpm. Location: 97447 Gerolzhofen, loaded on truck, unpacked. Sale as inspected, in current condition, without any warranty or guarantee. Hnjdpfx Aceyb S Hkjqor

Condition: used, drilling capacity steel/GG: 15 mm spindle taper: 1 MK arm length: 300 mm table size: 210 x 300 mm spindle sleeve stroke: 110 mm spindle turning speed range: 200 - 3000 rpm engine: 380 V, 1,1 kW Hnjdevxpp Hopfx Acqsr space needed: 850 x 420 x 1860 mm weight: 220 kg

Condition: used, Year of construction: 1996, machine/vehicle number: xxxx, Lg.no. 24265 Technical data: Hnedpotx Ubrjfx Acqsr - Shaft holder 35 mm - Shaft groove length 90 mm - Drive speed 1450 rpm - Drive 400 V / 4.4 kW - Space requirement approx. W 1300 x H 2500 x D 800 mm - Weight approx. 200 kg

Condition: good (used), Year of construction: 1988, machine/vehicle number: 251500126, Offer 24156 Technical data: - Drilling capacity in steel ST 60 18 mm Hnodpfxsvxhdcs Acqor - Drill spindle mount MK 2 - Drill spindle stroke 100 mm - Drill spindle speeds approx. 340 - 2400 rpm - Right and left rotation - Projection 250 mm - Max. distance table - drill spindle 670 mm - Table with 2 T-slots 320 x 280 mm - Height adjustable via rack with hand crank - Drive 400 V / 0.75 kW - Space requirement approx. W 500 x H 1750 x D 750 mm - Weight approx. 180 kg - with: - Keyless drill chuck

Condition: ready for operation (used), Year of construction: 2002, For sale used Rilesa Unix drilling machine Hnedpfou Shx Dox Acqjr - 4 drilling units top - 4 drilling units rear - Right and left

Condition: new, Year of construction: 2024, Power: 1.35kW Speed range: 230 - 3100 rpm Speed steps: 9 Spindle holder: MK-2 Drilling stroke: 85 mm Spindle projection: 140 - 540 mm Table size: Table size: 500 x 740 mm / 250 kg load capacity Hnsdpfjuix Sgox Acqsr Head inclination: 90° left / 45° right Column diameter: 80 mm Quick-action chuck: 1 - 16 mm Weight: 240 kg