Center lathe

TOS SUI 80

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, turning diameter over cross slide: 520 mm, spindle bore: 71 mm, turning diameter: 800 mm, turning length: 3,000 mm, Swing diameter over bed 800 mm, over support 520 mm Distance between centers 3000 mm Spindle nose size 8, spindle bore 71 mm Speed range 11.2 – 1800 rpm Feed range 0.06 – 13 mm/rev Metric thread pitch 0.5 – 160 mm Tailstock quill travel 210 mm, mounting MK 6 Main drive 15 kW incl. rapid traverse, fixed steady rest with roller heads Gsdpfx Aew Nvzzoggjip Quick-change tool holder Drehblitz with 2 cassettes, Taper turning attachment, HS reducing sleeve 3-axis digital readout Heidenhain ND 970 3-jaw chuck D 315 TOS, manual

Condition: used, Year of construction: 1985, grinding length 600 mm grinding width 200 mm Gijdswd Tx Uopfx Aggjp total power requirement 7,5 kW weight of the machine ca. 2,3 t

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Fixed setting vice with roller quills for SUI 80 TRENCIN Capacity : Gedpfxeu Tvdbs Aggeip 210 - 370 mm 365 - 520 mm Only available as a set

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 34 63 20 96 006, turning diameter over cross slide: 390 mm, spindle bore: 80 mm, turning diameter over bed slide: 500 mm, spindle speed (max.): 1,800 rpm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely pickup between 28/07/2025 and 31/07/2025. TECHNICAL DETAILS Swing over bed: 500 mm Swing over support: 390 mm Distance between centers: 1,800 mm Spindle bore: 80 mm Max. speed range: 18 – 1,800 rpm MACHINE DETAILS Dimensions: 4,000 x 1,800 x 1,900 mm Weight: 5,200 kg EQUIPMENT Gedpfswvhxgsx Aggeip - SONY digital display - Faceplate (diameter: 500 mm) - 2 steadies

Condition: used, Year of construction: 1965, honing diameter 80 mm stroke 280 mm throat 300 mm total power requirement 6 kW weight of the machine ca. 2,6 t Honing Ø 10 - 100 mm Max. honing depth, approx. 250 mm Max. spindle stroke 260 mm Distance between spindle and column 300 mm Mounting height 1,000 mm Table size 350 x 500 mm Height of table above floor 500 mm Spindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpm Stroke speed, infinitely variable, hydraulic 0 - 23 m/min Spindle drive 2 kW Godpfet Hwupjx Aggsip Total electrical load 6 kW - 380 V - 50 Hz Weight 2,600 kg Accessories / Special Features * Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. * Hydraulic infeed of the tool. * Switch-off via timer. * Air measuring device (probably). * Honing oil unit. * Various splash shields, etc. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We have a selection of honing machines available. Please let us know what you need.

Year of construction: 2013, condition: ready for operation (used), Turning length: 6000mm, orbital diameter over bed/support: 820mm/515mm, spindle bore: 128mm, speed: 1600rpm, spindle power: 46kW, center height: 400mm, bed width: 560mm, quill diameter: 125mm, quill stroke: 280mm, connected load: 62kW. Machine dimensions X/Y/Z: approx. 6500mm/2500mm/2300mm, control: Heidenhain, operating hours: approx. 9000h. Including accessories such as a steady rest. Documentation available. On-site inspection is possible. Gsdpfx Asvwcwuoggeip

Condition: ready for operation (used), Year of construction: 1999, IMMEDIATELY AVAILABLE, chamber filter press from Häcker with base frame and 50 m3/h Abel pump, plate format 1200 x 1200 mm, approx. 90 PP plates, 30 mm cake, content approx. 2700 liters, automatic. Plate transport, open outlet in filtrate trough on both sides, press is ready for use immediately after assembly, Abel pump was serviced by the manufacturer shortly before it was taken out of service, galvanized base frame with staircase, location is near Würzburg / Germany Godpfxerunu Ij Aggsip

Year of construction: 1993, condition: used, Chamfer lenght: 3.000 mm Stands passage: 2.750 mm Gijdpfx Ajkh Niqjggop Max. pressure: 180 t Control: CYBELEC DNC 70 Stroke: 220 mm Total power: 15 kW Weight of the machine: 11.000 kg

Year of construction: 1977, condition: used, turning diameter 700-1500 mm clamping length 3000 mm guage width 1676 mm Control weight of the machine ca. 60 t Rafamet UBC 150 wheelset lathe for railway wheelsets Serial No.: 152 110 Year of manufacture: 1977 Machining range: Diameter from 700 mm to 1500 mm Gauge of the wheelsets to be machined in standard version: 1435mm Gedpfx Ageuddglogoip track widths: 1435mm , 1524mm , 1676mm Length of wheelsets to be machined: 1640-3000mm Running diameter of the wheelset: 700-1500mm Driving diameter: 350-1350mm Width of the wheelset tyre: up to 140mm Fork dimensions of the wheelset lathe_ 8700x360x3250mm Total installed power: 172kW Weight of the machine: 59200kg Speed of the setting movement Lifting and centring device: 2500 mm/min. Headstocks: 1320 mm/min. Quills: 550mm/min. Supports in the longitudinal direction: 1300 mm/min.

Condition: good (used), Year of construction: 2003, travel distance X-axis: 13,000 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 30,000 rpm, distance between stands: 6,500 mm, spindle nose: HSK A63, X-axis: 13.000 mm Y-axis: 4.500 mm Z-axis: 1.000 mm Distance between columns: 6.500 mm Giodpfjtt I Sfsx Aggsp C-axis: 190º A-axis: 110º Positioning speed XYZ: 15.000 mm/min. Positioning speed AC: 10 tpm CNC Controller: Siemens 840D Spindle nose: HSK A63 Spindle speed: 30.000 rpm Spindle power: 20 kW Toolchanger: 20 Pockets Torrestool tables: 16x X-axis: 11.500 mm Y-axis: 3.500 mm Z-axis: 750 mm Country of origin: Spain Machine size LxWxH: 19.000 x 11.000 x 6770 mm Machine weight: 70.000 kg The Torresmill Gantry is a 5-axis CNC milling and drilling machine, specially designed to work on aeronautical materials (Composite, Aluminum, Titanium, Steel, ...). The Torresmill gantry is perfectly combined with the Torrestool universal clamping device, guaranteeing flexibility and process time.