Turning automatic lathe

Traub TNK 36

Condition: ready for operation (used), Year of construction: 2003, operating hours: 124,706 h, spindle speed (max.): 6,300 rpm, travel distance X-axis: 370 mm, travel distance Z-axis: 250 mm, spindle motor power: 10,700 W, controller manufacturer: TRAUB, controller model: TX8i (64-bit), number of axes: 6, This 6-axis TRAUB TNK 36 was manufactured in 2003. It features a maximum spindle speed of 6,300 rpm and a main spindle bore of 36 mm. The machine is equipped with advanced capabilities such as tool monitoring, rigid tapping, and a high-pressure coolant system. If you are looking to get high-quality turning capabilities, consider the TRAUB TNK 36 horizontal turning machine we have for sale. Contact us for further details. • MDE Interface: Yes • Tool Monitoring: Yes • Rigid Tapping: Yes (without compensation chuck) • Main Spindle Bore: 36 mm • Main Spindle Drive Power: AC 6.7 / 10.7 kW • Top turret stroke X/Z 50/100 mm • Rear attachment stroke X 73 / stroke Y +/-50 mm • Main Spindle C-Axis: Yes • Hainbuch Change Parts: Yes • Hainbuch Setup Aid Base Body: Yes • Hainbuch Manual Change Device: Yes • Counter Spindle: Motor Spindle • Counter Spindle C-Axis: Yes • Counter Clamping Pressure Device: Yes • Workpiece Ejection Device: Yes • Hainbuch Axfix Chuck: Yes • Upper Tool Carrier: Yes • Electronic Gearbox: Yes • X3 Cross Axis for Front Unit: Yes • Front Unit: 5-position • Driven Tools on Front Unit: Yes • Cut-Off Side Machining Station: Yes • Driven Tools on Cut-Off Side Station: Yes • Workpiece Unloading Device: Gripper • Coolant Tank Capacity: 230 l • Coolant Pressure: 7 bar • Coolant Flow Rate: 50 l/min • Internal Coolant Supply: 30 bar • High Pressure Coolant: 120 bar (front and rear machining station) • Coolant Filter: Knoll VRF 150/750 Vacuum Rotary Filter • Suitable Materials for Filter: Aluminum, Plastic, Brass, Steel • Wash Gun: Yes • Chip Conveyor: Hinged Belt Type • Chip Conveyor Discharge Height: 950 mm • Bar Loader Preparation: Yes • Guide Tubes: D25, D36 • Workpiece Stop: Running Type, Shank 16 × 16 mm Bdsdpfx Aboza Ucxowoc • Collision Monitoring: Brankamp CMS 100 • Connected Load: 22 kW • Bar Feeder: FMB turbo 5-42 XT / 3200"C" • Bar Feeder Year: 2003 • Maximum Bar Length: 3 m • Maximum Bar Diameter: 36 mm • Operating Voltage: 400 V, 3~, 50 Hz • Control Voltage: 24 V AC • Valve Voltage: 24 V DC • Clutch Voltage: 24 V DC • Total Installed Power: 33 kW • Total Rated Current: 60 A Technical Specification Through-spindle Coolant Yes Counter Spindle Yes Driven Tools Yes

Year of construction: 2003, condition: ready for operation (used), Tool monitoring, thread cutting without compensating chuck, main spindle: spindle bore: 36mm, max. speed: 6300rpm, drive power: AC 6.7/10.7kW, C-axis, Hainbuch change parts, installation aid base body, Hainbuch manual changing device, counter spindle: counter spindle as motor spindle, C-axis, device for counter clamping pressure, workpiece ejector device, Hainbuch Axfix chuck, upper tool carrier, driven tools, electronic gearbox, X3 cross axis for front attachment, 5-position front attachment and cut-off side machining station with driven tools, machine and control cabinet RAL 7037 (dust grey), covers RAL 7035 (light grey), workpiece discharge device: workpiece gripper, gripper jaws D5-8, D8-20, D20-36, coolant lubrication system: tank 230l/7bar/50l/min, internal coolant supply 30bar, high pressure 120bar at the front and rear machining station, Knoll VRF 150/750 vacuum rotary filter (suitable for aluminum, plastic, brass and steel), flushing gun, connected load: 33kW, control system: TX8i (64bit), flat screen 10.4 inch, additional piece counter, V24 RS232 and MDE interface in the control cabinet, operating hours: 124,705h, with FMB TURBO 5-42XT/3200/C bar feeder magazine, chip conveyor, coolant unit and basic equipment of static and driven tool holders. An on-site inspection is possible. Bdsdpey U Nq Iofx Abwec

Condition: used, Year of construction: 2005, turning diameter 5-42 mm Bjdpfx Abjy Nd U Dewjdc turning length 3200 mm control Traub TX8i x-axis 50 mm z-axis 50 mm weight of the machine ca. 4000 kg

Condition: good (used), Machining diameter max: 36 mm Maximum spindle speed: 6300 rpm No. of Spindles: 2 Controller: Traub TX8i Toolchanger 1: No. of tools: 12 positions X-axis travel: 50 mm Z-axis travel: 50 mm Toolchanger fronside: No. of tools: 7 positions Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 370 mm Z-axis travel: 250 mm Toolchanger backside: No. of tools: 5 Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 73 mm Barfeeder: FMB Turbo 5-42 Barlength: 3200 mm Bedpstrvzxofx Abwodc Bardiameter: 5 - 42 mm Country of origin: Germany Machine LxWxH: 3400 x 1300 x 1700 mm Machine weight: 4000 kg

Condition: good (used), Year of construction: 2001, TNK 36, year of manufacture 2001 including chip conveyor, Resy filtration system In good condition, operated without loader, not under power Bdsdpfxexv Sr Ij Abwec