Press brake

Trumpf TruBend 5320

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, operating hours: 14,367 h, pressing force: 320 t, stroke length: 445 mm, table length: 4,420 mm, throat depth: 420 mm, clearance between the columns: 3,680 mm, total width: 5,300 mm, total height: 3,200 mm, overall weight: 25,000 kg, year of last overhaul: 2026, Equipment: CE marking, safety light barrier, Special equipment: + Front work area lighting + Rear back gauge system, 6 axes, with control cabinet air conditioning Gedpfozdc A Iex Af Ajuf + ACB Easy communication bus (hardware side) + Hydraulic upper tool clamping + CNC-controlled lower tool positioning (I-axis) + CNC-controlled crowning Machine - Sturdy machine frame in all-steel construction Stress-relieved pressure beam through annealing - 4-cylinder upper drive - Block hydraulics with low-noise double pump - Rear back gauge with CNC-controlled X and R axes - Hydraulic upper tool clamping - Hydraulic lower tool clamping - Control cabinet cooling via air-to-air heat exchanger - Network connection for machine control Control - TRUMPF TASC 6000 Safety - Standard safety devices

Condition: new, Year of construction: 2025, functionality: fully functional, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. Godpforq D Nijx Af Asuf The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Condition: used, Year of construction: 2014, functionality: fully functional, pressing force: 320 t, overall weight: 22,800 kg, Equipment: CE marking, documentation/manual, Used, but in very good condition – TruBend 5320 press brake 6 axes: Y1 – Y2 – Z1 – Z2 – X – R Complete with: i-axis 4-axis back gauge Year of manufacture: 2014 Options / Equipment: Bending aids CNC-controlled crowning system Hydraulic upper and lower tool clamping system Right-side parking position Working length 4100 mm Max. press force 3200 kN / 320 tons Max. stroke 445 mm Gedpfxszamycs Af Aeuf The machine has been serviced and maintained by TRUMPF.

Condition: new, Year of construction: 2026, table length 3000 mm table width 1500 mm burner heads 1 Control CNC workpiece weight 900 kg traversing speed 91 m/min dimensions of the machine ca. 5562 x 2270 x 2388 mm Laser cutting machine with manual shuttle table Configuration 1. BodorPower laser source 6 kW 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Bed made of tenon and mortise structure 5. Bodor servo motor and driver 6. Nitrogen control valve 7. Bodor Lightning perforation technology 8. Automatic layout of residual material 9. 21.5-inch monitor with touch function 10. Automatic adjustment of cutting gas pressure 11. Active anti-collision function Godswh Ulqopfx Af Ajuf 12. Intelligent vibration protection 13. Anti-burn mineral casting 14. Bodor Mango® Ergonomic Remote Control 15. Gas-saving nozzles with stable flow 16. Intelligent maintenance reminder 17. WIFI internet connection 18. Water cooling 19. Extraction system 20. Wear parts set CUTTING CAPACITY: STRUCTURAL STEEL 20 mm STAINLESS STEEL 18 mm ALUMINUM 14 mm OPTIONAL: LANTEK EXPERT II CUT software incl. post-processor

Condition: used, material width 300 mm coil weight 3 t material thickness 2 - 4 mm Straightener, 7 rolls, Make. Schleicher, Type RM 6-95/160 - band width 300 mm - band thickness 2 – 4 mm - cross cut 1200 mm² - voltage 220/380 V 50 Hz Gedpocdrmmofx Af Asuf - total power requirement 3,1 kW coiler with press roll, Make Schleicher, Type H-3 - Coil weight 3 t - Band width 400 mm - voltage 220/380 V 50 Hz - total power requirement 3,92 kW without control

Condition: new, Press brake tool/upper punch for Trumpf press brake Gsdpjiimz Rsfx Af Asuf H256mm, L500mm, L550mm in segment

Condition: excellent (used), Year of construction: 2014, Controller WINMAX DSM Table size 1020 × 510 mm Max. load capacity 1000 kg X-axis travel 760 mm Y-axis travel 510 mm Z-axis travel 610 mm Drive power 13 kW Speed ​​range 10 - 18000 rpm ATC magazine 40-positions Spindle type HSK63A Rapid traverse X/Y/Z = 35 / 35 / 30 m/min Feed rates 3 - 15200 mm/min Weight 5000 kgs Dimensions L x W x H = 2450 x 2650 x 2700 mm Equipment, accessories - Software options: 3D, DXF, NCPP/ISNC Ulti-Motion, Solid Model Import, Job List, Pocket/Island, Rigid tapping, Graphical Simulation - Coolant through spindle 20 bar, - Glass Scales on all axes, - Renishaw zero point presetter - Air coolant through the spindle - Chip Conveyor Gjdpfx Aeyxb Dhsf Asuf - Portal Handwheel - Machine mounts The machine is nearly in new condition. Available for immediate sale. Currently powered up in Hungary.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, We are selling this lathe. Accessories included: steady rest, additional milling attachment. Turning length: 8000 mm Diameter over bed: Ø 2020 mm Diameter over cross slide: Ø 1600 mm Spindle bore: 120 mm Spindle speed/ranges: 180 rpm Spindle power: 80 kW Tailstock spindle: Ø 400 Spindle travel: 250 mm Dimensions: Gujdpjx Auwgofx Af Ajf Length: 15360 mm Width: 3520 mm Height: 2600 mm Weight: 78000 kg The machine is located in the area of the former Vítkovice Foundry in Ostrava, Czech Republic. The machine is connected and can be tested. We can send a video of the machine via WhatsApp.

Condition: new, Year of construction: 2025, functionality: fully functional, stroke length: 310 mm, operating speed: 10 mm/s, reverse speed: 200 mm/s, throat depth: 410 mm, oil tank capacity: 220 l, travel distance X-axis: 750 mm, controller manufacturer: ESA, controller model: S 875W, working width: 4,100 mm, bending force (max.): 220 t, back gauge: 750 mm, distance between stands: 3,600 mm, control type: CNC control, degree of automation: automatic, number of support arms: 2, back gauge adjustment: CNC-controlled, number of axes: 8, type of crowning: CNC-controlled, Hybrid Bending Press MVD 4100 x 220 Tons HC-Series CNC ESA S 875W 21″ *dxf 3D ready 8 axes (Y1-Y2-X-R-Z1-Z2-X5_conical_A1) Automatic WILA crowning table Dsp Laser GIVI MISURE high-precision optical scales UNIMEC back gauge Upper tool clamp: Promecam Rolleri Type H = 150 mm Multi-cavity die, full length Press force: 220 tons Bending length: 4100 mm Distance between uprights: 3600 mm Throat depth: 410 mm Table – ram opening (“light”): 515 mm Working height: 965 mm Y-axis stroke: 310 mm Y-axis descent speed: 200 mm/s Y-axis working speed: 0–10 mm/s Gujdpox N Rxcsfx Af Aof Y-axis return speed: 200 mm/s X-axis back gauge stroke: 750 mm Power: 18.5 kW Dimensions (L x W x H): 5600 x 2200 x 3040 mm Approximate weight: 13,700 kg

Year of construction: 2010, condition: ready for operation (used), For sale is a CNC laser cutting machine from TRUMPF. laser power: approx. 3000W (3kW), working area: X/Y/Z 3000mm/1500mm/115mm. Additionally, a suitable Liftmaster from the year 2015 is offered, which can also be purchased separately. Gedexxa Ucepfx Af Aeuf