Centre lathe

Skoda SUT 200

Condition: used, Year of construction: 1984, turning diameter over cross slide: 1,600 mm, turning diameter: 2,000 mm, turning diameter over bed slide: 2,000 mm, turning length: 35,000 mm, workpiece weight (max.): 63,000 kg, Center Lathe SKODA - SUT 200 TD MACH-ID 9446 Hedpfx Aqjynky Aorep Manufacturer: SKODA Model: SUT 200 TD Year of manufacture: 1984 Tandem construction on one bed, with left and right headstocks Faceplate double tailstock left and right Double carriage Steady rest included Roller rest included Operator panel with scales requires attention and replacement Motorized tailstock for each side (left and right) 3-bed way design Torque on chuck: 160,000 Nm Minimum turning diameter: Ø 315 mm Industries served: - Shipyards - Propeller shaft manufacturing - Hydraulic cylinder shafts - Camshafts - Defence & Aerospace - Rolls and shafts for steel mills - Crankshafts Specifications Metric / Imperial Turning length: 35,000 mm Swing over bed: Ø 2,000 mm Swing over carriage: Ø 1,600 mm Spindle power: 75 kW Bed width: 1,600 mm Quill diameter: Ø 400 mm Quill stroke: 250 mm Max spindle speed: 180 rpm Feed X-axis: 5,000 mm/min Feed Z-axis: 5,000 mm/min Workpiece weight: 63,000 kg Approximate dimensions: Length: 42,000 mm Width: 3,250 mm Height: 3,250 mm Weight: 158,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend verifying all important details.

Condition: ready for operation (used), CAP30 APPLICATOR 1000 HELICAP23: YOM 2016 VERSION 300v 15.600 RUNNING HOURS PRICE 150.000 EUR FCA POLAND THE MACHINE WAS IN PRODUCTION TILL SEPTEMBER 20. Hjdpfx Aqsw Nqn Nersp EXCELLENT CONDITION EXCELLENT CONDITION, READY FOR SHIPPING

Condition: used, Year of construction: 1981, machine/vehicle number: 78.977, Equipment: documentation/manual, Year of manufacture: 1981 / Year of retrofit: 1996/1997 Control: Siemens 840 C Hsdpfx Aeqc Umgoqrop Siemens control for X/Y/Z/W/U/B/V axes Spindle diameter: 200 mm Main motor Siemens: 68 kW Spindle speeds: I gear: 3 - 202 rpm II gear: 180 - 808 rpm X travel: 12,000 mm Y travel: 4,500 mm Z travel: 2,400 mm (supporting sleeve □ 520 mm/travel 1200 mm + W axis 1200 mm) Mount: SK60 (SK50) Facing slide: yes Milling head: 2 units Prepared for CNC rotary table (4th axis) Without rotary table and clamping field (available separately) Full documentation Net weight: approx. 140 tons Video available!

Condition: excellent (used), Herringbone Gear Generator MDV 2000 MDV 2000 Characteristics: Max. wheel diameter: 2000 mm Min. wheel diameter: 50 mm Max. module: 12 Min. module: 3 Hedpofx Ibnefx Aqrop

Condition: excellent (used), Like brand new machine for soft and hard cover books! Both PUR and EVA capability! Production speed: 1–3 books per minute Min/max binding thickness: 0.1–45 mm Max. binding length Up to 455 mm Min/Max. binding heigh: 140 mm / 320 mm Max soft cover thickness: Up to 400 g/m2 Voltage (V) / Frequency (Hz) 220–240 / 50–60 Max. current: 3.8 A Machine dimensions (W x L x H): 107 x 60 x 64 cm Weight: 90 kg Hodpovnzx Eofx Aqrsp Standard tools Hard & Soft cover tool set Casemaker available also

Condition: used, Year of construction: 1990, I - beam section - flat steel 140 x 140 x 13 mm I-beam section - upend 120 x 120 x 13 mm L-beam 130 x 130 x 12 mm round bar steel 85 mm bending capacity - flat iron 125 25 mm flat steel 65 x 65 mm including various rollers: Pipe Ø: 219 mm (tool/roller Ø 535 mm) 140 mm (tool/roller Ø 420 mm) 273 mm (tool/roller Ø 520 mm) 203mm 168.3 mm (tool/roller Ø 500 mm) 75 mm (tool/roller Ø 400 mm) 49 mm (tool/roller Ø 420 mm) 48.3 mm (tool/roller Ø 420 mm) 22.5 mm (tool/roller Ø 420 mm) Hjdpfx Aqott Ecdjrjp 32/32.5 mm (tool/roller Ø 420 mm) 60 mm (tool/roller Ø 420 mm)

Condition: excellent (used), Year of construction: 2009, x-travel 500 mm y-travel 450 mm z-travel 400 mm control Siemens 840 D tool adaptor SK 40 spindle turning speed - stepless 2 U/min Hodpfezawmaex Aqrep feed speeds mm/min tool change unit 16 surface area 700 x 500 mm workpiece weight max. 500 kg weight of the machine ca. 4,4 t Overall size 2,8 x 2,6 x 2,5 mm Full coverhing/ housing cooling device, handwheel only about 1.500 h

Condition: used, Year of construction: 2018, operating hours: 43,202 h, functionality: fully functional, Doosan Lynx 2100LM – CNC Lathe SPECIFICATION Hjdpfxsya N Ipj Aqrop • Control: Siemens S828D • Main spindle max. speed: 6000 rpm • Main spindle motor power: 12.6 / 10.5 kW • Driven tool power: 6.2 / 4.1 kW • Tool stations: 12 • 3-jaw hydraulic chuck: 170 mm • Turning diameter (bed/turret): 600 / 400 mm • Max. workpiece size: Ø 300 x 510 mm • Max. bar diameter: 51 mm • Rapid traverse (X/Z): 30 / 36 m/min • Turret index time: 0.11 sec • Axis travel: o X: 205 mm o Z: 560 mm • Machine dimensions: 2540 x 1595 x 1693 mm • Machine weight: 3480 kg Equipment • High-pressure coolant, 0.7 MPa • Tool presetter • 8 static and 4 driven tool holders • Tailstock • Collet chuck • Parts catcher • Bar feeder preparation • 3 m LNS bar feeder • Chip conveyor (LNS MH500)

Condition: used, Year of construction: 1994, total length: 6,300 mm, total width: 2,000 mm, total height: 1,800 mm, Empty weight: 24.000 kg Price: On request Hodpexyklnefx Aqrep - Year: 1994 - Documentation available: No - CE certificate present: No - Serial number: 10659 - Drive system: Conventional - Number of rolls [pcs.]: 4 - Max. sheet thickness [mm]: 25 - Max. working width [mm]: 3000 - Top roll diameter [mm]: 350 - Bottom roll diameter [mm]: 300 - Transport dimensions: 6300mm x 2000mm x 1800mm (l x w x h) - Transport weight [kg]: 24000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2025, turning height: 2,000 mm, workpiece weight (max.): 12,000 kg, faceplate diameter: 2,000 mm, CNC Vertical Turning Center Model: VTC-20/30 with Fanuc 31i-B Table diameter: Ø2,000 mm Maximum swing diameter: Ø3,000 mm Maximum turning height: 2,000 mm Table speed: max. 200 rpm Table load capacity: 12,000 kg Table indexing: 0.001° Z-Axis (vertical ram travel): 1,200 mm Main spindle speed: max. 15 ~ 2,000 rpm Ram size: 240 mm x 240 mm Milling spindle taper: ISO 50 Tool shank size: 40 mm x 40 mm Crossrail (vertical travel): 1,000 mm 250 x 4 stages (hydraulic) Rapid traverse X-axis: 10,000 mm/min Rapid traverse 7-axis: 10,000 mm/min Cutting feed rate: 1 ~ 3,000 mm/min Table drive motor: AC 45/55 kW (continuous / 30 min.) Milling spindle drive power ISO 50: 18.5/22 kW (continuous / 30 min.) Control: Fanuc 31i-B Display unit: 15-inch TFT-LCD Tape memory: 1 MB Automatic tool changer: 12 positions (for 5 turning tools + 1 cover + 6 milling tools) Standard tool holders: New 240 TCR-01 (2 pieces) Splash guard: Table version (R-type standard) External coolant system: 3 bar (80 liters/min.) Chip conveyor: hinge-type 4-jaw independent manual chuck Foundation anchor bolts / shims Maintenance tools and toolbox Hydraulic power unit Work area lighting Signal lamp: 3 colors (green, red, yellow) Operating manuals (English): NC 1 CD with Fanuc manuals and 2 books with mechanical/electrical instructions Power supply: 220 V, 60 Hz, 3 phase Machine color: manufacturer standard OPTIONAL ACCESSORIES (#1) Automatic tool changer ATC 24 positions - on request Automatic shutdown for N.C - on request Turning tool holder type 240TCR - on request Through-spindle coolant supply: 30 bar (pump pressure) - on request Transformer 415 V, 50 Hz, 3 phase - on request Linear scales X, Z-axis - on request Rigid tapping - on request Automatic tool changer ATC 24 positions - on request Other notes: INSTALLATION, COMMISSIONING, TRIAL OPERATION AND TRAINING - not included in the price INSURANCE AND FREIGHT - not included in the price Errors in the technical data excepted. The scope of accessories applies only as explicitly described in the article’s text. Any additionally pictured accessories, for example for illustration purposes, are not included in the offer. The general terms and conditions of JS-Werkzeugmaschinen GmbH apply. Hodpfexqb D Nsx Aqrjp