HYDRAULIC HORIZONTAL PRESS MACHINE

TUBEND HP 60

Condition: new, Year of construction: 2025, The CORMAK HBS260 band saw for cutting pipes, profiles and bars is widely used in all locksmith workshops where precision, quality and cutting speed are important. The model is equipped with a 0-60° swiveling arm. The frame design ensures accurate and quiet operation. It has a removable filing tray for easy cleaning! Machine characteristics A horizontal metal band cutter with a swiveling arm allows cutting in a plane perpendicular to the axis of the material being cut and at any angle ranging from 0 to 60°. The material to be cut can be fed manually or with any mechanical device, and the tool feed is automatic. The tape guides are equipped with special carbide plates and bearings. This has a huge impact on the belt guidance, its life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and saw blade. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The cutter's arm made of uniform cast iron together with the 27 mm wide cutting band used in this cutter allows it to fully perform multi-series cuts of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The saw blade guides are equipped with hard metal plates - sintered carbides and a rolling bearing system. It is the CENTRED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The shape of the upper part of the base constitutes a bathtub for draining coolant and catching chips generated while cutting the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the movement of the cutting band and the falling feed of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic actuator. The feed speed is regulated on the cutter's control panel. We can choose from two cutting band speeds: 35 and 70 m/min. In the lower position of the arm (after cutting the material), the cutting belt drive is turned off automatically. Safety is ensured by the cutting band covers and micro switches that stop the engine after the cutting cycle is completed or any of the covers are opened. Additional protection consists in automatic shutdown of the cutter in the event of the cutting band breaking. Cutting band size [mm] 2500 x 27 x 0.9 Tape tension mechanical (manual) Belt speeds [m/min] 35, 70 Adjustable arm drop stepless - hydraulic actuator Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame tilt [°] 0-60 Power supply 3 phases 400V Iedpemrnk Ejfx Aaaotp Main engine power [kW] 1.1/1.5 Cooling pump motor power [kW] 0.05 Dimensions with base [cm] 150x80x140 Weight [kg] gross/net - 210 / 180 kg *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, pressure 28 t stroke 180 mm table-size 300 x 550 mm diameter of piston 130 mm work speed min. 2 m/sec work speed max. 9,8 m/sec return speed 20 mm/sec Max. pressure 200 bar weight of the machine ca. 0,65 t total power requirement 4 kW dimensions of the machine ca. 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled, as well as tools that are in the holes and pin holes can be installed to carry out various types of work. • The hydraulic system can be adjusted with the help of the pressure and flow adjustment valves can be regulated, which is the pressing force and the speed of the press influence. The press is equipped with a built-in manometer. • The control panel is used to operate and display the piston stroke and for Choice between manual or automatic operation, and the HB-28 model is also with a built-in memory for up to 4 different programs fitted. • Operation is via electric foot pedals. Iedpfx Aegvkmroaajtp • The Profi Press HB-28 model can be equipped with various optional accessories hearing parts and tools for installation on the workbench and the Tool holder to be delivered.

Year of construction: 2004, condition: used, machine/vehicle number: 0201-220031, FICEP DZ 603 drilling machine for sectional steel The Ficep DZ 603 is a drilling machine with 3 drilling axes for profile processing. This 3-axis drilling machine is designed for profile beam processing in steel construction. Steel profiles can be drilled and center-punched automatically on 3 axes (flange and web). The CNC control from Mitrol with Arianna software takes care of programming the drilling system. CAD data in DSTV or DXF format is converted into NC data in the CNC control and the machine starts the machine program in which the axes are moved to the specified position. A gripper measuring carriage positions the profile at the appropriate drilling position in the drilling unit. A 5-fold tool changer ensures fast drill bit changes on the individual drilling axes. A stable roller conveyor transports the steel profiles in the infeed and outfeed areas. Technical description Ficep DZ 603 drilling unit: Ijdpfx Aaerr Taueaetp Beam height: max. 610 mm Flange width: max. 450 mm Machining length: max. 11,300 mm CNC control Mitrol ARIANNA 3 drilling spindles suitable for HSS cooling channel drills Spindle speed: from 180 to 1000 RPM Drill diameter: min ø 8 mm - max ø 40 mm Power of the drilling spindles 7.5 kW each The DZ603 drilling machine is sold without marking unit.

Condition: used, mileage: 1,000 km, power: 375 kW (509.86 HP), overall weight: 32,000 kg, fuel type: diesel, color: grey, axle configuration: > 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, first registration: 02/2024, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN 35.510 TGS flatbed with 955 Effer crane + JIB 8x4 + cable winch Available immediately Euro 6 L package 510 hp Suspension: Air suspension Wheelbase: 5,30m Flatbed with container lock Effer crane Type: 955/8S + JIB 6S Load torque: 590 kNm with radio remote control with cable winch S19L / 1900daN 4x hydr. outriggers Equipment: * Aluminum fuel tank * Trailer coupling * Brake booster * Diff lock * Electric windows * Electrically adjustable exterior mirrors * Low noise level * Speed limiter * Air suspension * Air horn * Engine brake * Fog lights * Particle filter * Radio/CD player * Reversing camera * Sleeping cabin * Sun protection flap Iedskw Tfbepfx Aaajtp * Spoiler * Toolbox * PTO shaft (PTO) * Central locking * Drawbar We are also happy to support you in the area of financing/leasing with our partners. All information without guarantee. Errors and omissions excepted.

Condition: used, Year of construction: 2016, machine/vehicle number: 0401-230047, The FICEP Tipo G31 sheet metal processing center for the economical processing of sheet steel and flat steel in steel construction and the steel trade. The Ficep Tipo G31 LG can drill, center punch, thread, countersink, mark, mill, oxy-fuel cut and plasma cut flat steel or sheet metal with a maximum sheet width of 3,100 mm and a sheet length of 14,000 mm in a single system. Itedsrr Sqlepfx Aaaep The CNC-controlled sheet metal processing center is equipped with two 26 kW drilling units. 2 tool changers, each with 24 tool stations for ISO 40 tool holders, are available for automatic tool changes. The system is suitable for sheet sizes: Sheet width: minimum 200 mm, maximum 3100 mm; sheet length: minimum 2500 mm and maximum 14,000 mm. A powerful and modern Hypertherm HPR 400 XD plasma source is available for plasma cutting. The system also has an oxyfuel cutting unit for thick material thicknesses. The drilling unit with a high torque and a spindle speed of up to 6,000 rpm is designed for drilling with carbide tools such as solid carbide drills, Nenok Multiplex interchangeable insert tools as well as for use with HSS coolant channel drills with a drilling diameter of 10 mm to 40 mm. The Ficep Tipo G31 machine is in very good condition and has only a few operating hours.

Condition: like new (used), Year of construction: 2017, machine/vehicle number: 35313, Ficep Rapid 35T Automatic Drilling & Sawing Line Automatic CNC high-speed drilling and sawing line for angles/miters: RAPID 35T Angle size (410 N/mm²) (min. mm): 60x60x6 Angle size (410 N/mm²) (max. mm): 350x350x40 Drilling heads (qty): 2 Drilling tools per head (number): 3 (6) Drilling diameter (mm): 40 Spindle power (kW): 19 (27) Spindle speed (max. RPM): 3500 Isdpfxot Nzlqs Aaaotp Spindle stroke (mm): 200 Cutting unit: Circular saw The feed and discharge lengths for this line are as follows: Feed: 16M Discharge: 12M If you would like more photos or information, please contact us.

Condition: new, Horizontal Bending Machine Fastech FP 30 Description • Pressure: 30t • Stroke: 285mm • Max. tool height: 250mm • Flat bar on the tall edge: 200 x 18mm • Working speed: 10.0mm/sec • Return speed: 10.0mm/sec • Working height: 930mm • Table: 660 x 1250mm • Total power requirement: 3.0kW • Motor: 400 Volt 50Hz • Weight: 850kg • Dimensions (L-W-H): 1250 x 650 x 1250mm • Oil capacity: 40.0l Equipment: Ijdpfx Aaofg Eu Ueaotp • Hydraulic horizontal bending machine • Solid work surface made of stabilized steel • Machine made from hardened and ground forged steel • Digital stroke adjustment display • 1x tool set • Double foot switch

Condition: new, Pressure capacity 40 t Folding length 1270 mm Clearance between the uprights 980 mm Projection 200 mm Installation height 320 mm Stroke 100 mm Working speed 10 mm/s Drive power 4 kW Dimensions L x W x H approx. 1950 x 1450 x 2100 mm Weight approx. 3200 kg Accessories / special features: - Manual operation for the motorized plunge depth and the backgauge Itjdpfx Ajgiud Hjaajp o Ball screw spindles o Fine adjustment via handwheel - Top tool PM 1, consisting of 1 x 835 mm and 1 x 435 mm, slightly cranked, R=0.8 mm, pressure load 100 t/m, tip 88° - Universal die 50 x 50 mm with several V-openings - Back gauge with ball screws, length = 600 mm - Only one working speed 10 mm/s for all vertical movements, therefore no light barrier is required! - Front support arms - Suspended control panel - Paint finish: dark gray RAL 7031, light gray RAL 7035, yellow RAL 1033 - Operating instructions - CE-compliant Delivery time: approx. 2-3 months after receipt of order plus pre-freight costs China - Germany Exclusive representation! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: excellent (used), mileage: 324,000 km, power: 471 kW (640.38 HP), fuel type: diesel, color: black, axle configuration: 8x4, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 6,600 mm, Year of construction: 2018, operating hours: 2,152 h, Equipment: ABS, air conditioning, cruise control, low noise, navigation system, parking heater, retarder, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Electric windows - Electrically adjustable exterior mirrors - Speed limiter - Intarder - Refrigerator - Alloy wheels Itsdeut Euqopfx Aaaop - Air suspension - Air horn - Radio/CD player - Reversing camera - Sun visor - Auxiliary heater - Toolbox - Xenon lighting - Power take-off (PTO) - Central lubrication system - Central locking - Towing jaw = Further Information = General Information Year of manufacture: March 2018 Axle Configuration Front axle 1: Alloy wheels; Steered Front axle 2: Alloy wheels; Suspension: air suspension Rear axle 1: Alloy wheels; Suspension: air suspension Rear axle 2: Alloy wheels; Lift axle; Steered; Suspension: air suspension Weights Unladen weight: 19,365 kg Payload: 15,638 kg Gross vehicle weight: 35,000 kg Functional Crane: EFFER 395/8S, year of manufacture 2017, mounted behind the cab Body brand: EFFER 395/8S CE marking: yes Condition Technical condition: very good Optical condition: very good Financial Information Price: On request

Condition: excellent (used), mileage: 219,442 km, power: 375 kW (509.86 HP), fuel type: diesel, color: white, axle configuration: 8x2, fuel: diesel, brakes: retarder, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: air conditioning, retarder, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Electric windows - Electronic Braking System (EBS) - Intarder - Refrigerator - Reversing camera - Seat heating - Sun visor - Power Take-Off (PTO) - Central lubrication = Further Information = General Information Year of manufacture: June 2021 Iodpfsw Sfgfsx Aaastp Axle Configuration Front axle 1: Steered; Tire tread left: 50%; Tire tread right: 50% Front axle 2: Steered; Tire tread left: 50%; Tire tread right: 50% Rear axle 1: Tire tread left: 50%; Tire tread right: 50% Rear axle 2: Steered; Tire tread left: 50%; Tire tread right: 50% Weights Unladen weight: 25,118 kg Functional Crane: Yes Superstructure brand: Fassi CE marking: yes Condition Technical condition: very good Visual condition: very good Financial information Price: On request Further information For more information, contact John de Koning or Mark de Koning.