Turntable lining

unbekannt Durchmesser 160 mm

Condition: used, Bezel, stick, lynette -Max. Passage: Ø 160 mm -Tip height: mm -Edition: gunmetal -technical drawing with the photos Hsdoddfhvspfx Ad Donw -Dimensions: 500/85/H740 mm -Weight: 38 kg

Condition: good (used), functionality: fully functional, spindle bore: 36 mm, center height: 155 mm, turning length: 800 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 25 rpm, Used Weiler Condor lathe, No. 7939, Center height 155mm, Center width 800mm, Spindle speeds 12-2800 rpm, spindle bore 36mm Hedpfx Adev R Tdxo Denw Accessories: 1x RÖHM three-jaw chuck Ø 160mm, Multifix base body size B with 2 inserts, keyless drill chuck, live center, and coolant system. The machine is in stock at our facility in 71334 Waiblingen-Beinstein and is available immediately.

Condition: used, Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Chuck size: O 160 mm Hedpfedpyzxjx Ad Djnw -without: interchangeable jaws -Bore centric: mm -Dimensions: 320/230 / H220 mm -Weight: 30 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 160 mm -Passage: Ø 41mm Hnedpfx Adjd Irbae Dsw -Weight: 8.7 kg

Condition: used, Suspension crane runway Crane system DEMAG type KBK 1 Year of construction approx. 2000 Monorail overhead crane system with monorail crane bridge Light crane system made of KBK modular system sections load capacity: 125 kg Span width: 5 meters Distance between longitudinal rails: 4.1 meters Longitudinal girder length complete: 12 metres Beam profile crossbeam = KBK1 Beam profile longitudinal rails = KBK1 Consisting of: 29 meters KBK-1 system profile (4x 6000 mm + 1x 5000 mm) 1 piece of trolleys for the crane suspension 2 pieces double carriage for the longitudinal rails Hedpfxehrkrtj Ad Denw 10 pieces screw claws for the crane suspension or ceiling attachment (without beam clamps) 6 pcs. end covers suitable for KBK1 runners

Condition: used, Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 160 mm Hodjdykbtjpfx Ad Dsnw -1 set: outside jaws -Passage: Ø 42 mm -Weight: 11.2 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck Hodpfxodz U Sve Ad Donw -Chuck size: Ø 160 mm -Throughout: Ø 46 mm -Weight: 9 kg

Condition: used, Year of construction: 1998, pressure 175 t chamfer lenght 4050 mm distance between columns 3050 mm throat 300 mm stroke 240 mm stroke speed - idle stroke downwards max. 140 mm/sec working feed max. 9 mm/sec stroke speed -return max. 130 mm/sec distance between table / ram min. 370 - max. 610 mm control CYBELEC DNC 880S total power requirement 15 kW weight of the machine ca. 15 t dimensions of the machine ca. 5,89 x 3,6 x 3,16 m Features: - Controlled axes: Y1, Y2, X, R - CNC crowning - CYBELEC DNC 880S control - Swivel control, front right - 4x manually adjustable stop fingers - Foot switch - 1 set of upper tools - 1 set of lower tools - 2x material support arms at the front Hnsdpfx Adstv Rh Ae Dow - Side + rear protective device - Operating instructions

Condition: used, Three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 160 mm -6 set: clamping jaws Hnedped A Hpwefx Ad Dew -Weight: 17.5 kg

Condition: used, Bezel, stick, lynette Hsdpfx Ascill Rsd Dsnw -Max. Passage: Ø 160 mm -Tip height: 220 mm -Edition: gray cast iron -technical drawing with the photos -Dimensions: 450/100/H500 mm -Weight: 33 kg

Condition: used, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gearbox Year of construction: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - last used for round tube Ø 15.4 x 0.8 mm, R60 mm - Bending tools and bending jaws interchangeable - Bending tool drive via AC servo motor and Alpha spur gear, planetary gearbox - 2-part bending tool opens and closes via hydraulic stroke movement - MERKLE hydraulic round block cylinder, item 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending jaw via Festo compressed air cylinder - without electrical control - without hydraulic unit Dimensions L/W/H 760 x 400 x 150 mm weight: approx. 60 kg good condition Removed from a functional special machine, tested before removal. Drive: Brushless permanent magnet servo motor SIEMENS Typ:1FK6061-7AF71-1EG0 Nominal torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 pieces available in right-hand version. 5 pieces available in left-hand version. Hsdpjd E A I Ijfx Ad Denw The price quoted refers to 1 bending unit with servo motor. If required, we also sell individual assemblies of the bending unit. We also offer the electrical components for controlling the servo motor. We also offer hydraulic units.

Condition: used, Pipe clamping system, clamps for butt welding device, butt welding device, mirror welding device, pipe welding device, assembly device for pipes Hnodpfxjb A Rkdo Ad Dow -Sockets diameter: 90/105/125/160 mm -Angle: adjustable -Double clamping device: for pipe mounting -Weight: 65 kg

Condition: good (used), Bezel, steady rest, lynette -max. passage: Ø 250 mm -Centre height: 220 mm -Edition: Cast -Dimensions: 462/150/H505 mm -Weight: 39 kg Hnodpfxedpaq Rs Ad Djw

Condition: excellent (used), Tool holders and turning tool holders Manufacturer: SANDVIK COROMANT VDI40-CAPTO C4 Set Mounting: Ø 40 mm ----- Consisting of: No.: 1405 = 2x VDI40 steel tool holder seat C4 No. C4-RC2040-51030 Weight/piece approx.: 4 kg Unit price net: €350/piece ----- Various tool holders: 2x Internal boring bar €90/piece 2x External turning tool holder €120/piece 1x Parting-off tool holder (blade type) €120/piece _____ Turning tool holder, steel tool holder, turning tool, tool bit holder, tool holder, axial tool holder. ----- -Various types: see photos, additional images upon request -The package is only sold as a complete set Hjdpfxjvtzpbs Ad Dsnw Shipping costs upon request