Unisign uniport 6000

Unisign uniport 6000

Condition: good (used), Year of construction: 2010, functionality: fully functional, Unisign Uniport 6000, Year of manufacture 2010 / Commissioned 2011, Siemens 840 D control system, Travel distances X 10,000 mm, Y 1,500 mm, Increased spindle carriage stroke: Z 1,000 mm, Increased through-height 1,000 mm, Through-width 1,500 mm, Main drive 36 kW, n = 6,000 rpm, 720 Nm 2-stage gearbox 1:4 SK 50 tool holder Machining performance in C45: Full drilling D=120mm, threading M55, milling 100cm³/min Gantry design with movable portal bridge and stationary machine table. Machine table with clamping bars in the transverse direction, each with 750 mm spacing. The standard plate fields are omitted. Gantry-style machine Hydraulic clamping device with clamping bridges for machining shafts, including hydraulic system Angle drilling & milling head, n = 4,000 rpm, SK50 High accuracy and stability due to Hirth gearing Automatic tool change in the angle head Measuring probe RWP20.50-M Swinging operation Safety fence with light curtains, manufacturer Sick Machine table with clamping bars in the transverse direction, each 750 mm Tool chain magazine on the portal stand with 30 positions Machine coolant system Water-air heat exchanger integrated in the control cabinet Unisign remote diagnostics for Siemens Sinumerik 840 D Makrolon curtains on both sides of the portal bridge, adjustable in height by motor Dwodpfozua N Sjx Ap Iec Partition wall with viewing panel Chip conveyor with hinged belt design Installation and alignment elements

Condition: used, Year of construction: 2007, Wire EDM machine Sodick AQ537L, year of manufacture 2007 Dwedpfx Ajy Rxtkjp Isc with few operating hours It has a total operating hour counter, which indicates the total time the machine has been switched on. This shows approximately 4,500 hours; during this time, it performed actual wire EDM work for 70% of the time, which corresponds to approximately 3,100 – 3,500 actual operating hours. Wire EDM machine Sodick AQ 327L, year of manufacture 2006 Wire EDM machine Sodick AG 60L, year of manufacture 2020

Condition: excellent (used), travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 750 mm, table width: 1,500 mm, table length: 850 mm, rotational speed (max.): 2,500 rpm, quill stroke: 120 mm, SHW UF 5 Travels - X-axis (rotary table): 1,500 mm - Y-axis (vertical headstock): 1,000 mm - Z-axis (horizontal headstock): 750 mm Control system - CNC control: Heidenhain TNC 355 Automatic swivel head (change between horizontal and vertical machining) Quill 120mm Milling spindle holder SK 50 Speed 2500 rpm Partial overhaul 2014 - Year of construction 1990 - Inspection/repair 2025 Table assembly - Travel distance: X = 1,500 mm - Clamping surface: 1,500 x 800 mm Chip conveyor Splash guard cabin We have ALL spare parts for this series (SHW UF 5) in stock! About us: Djdpfxovfm I Tj Ap Iswc MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is in the field of tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization _____ Used machine - used milling machine - used bed type milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - milling machine used - milling machine used - CNC milling machine used - drilling milling machine used - milling machine metal used - metal milling machine used - metal milling machine used metal milling machine used - used cnc milling machine - cnc milling machines - cnc milling machines - milling machine - large part machining - large part machining - large part machining - cnc large part machining - milling - shw - uf5 - uf 5 - Uniforce - SHW UF - SHW Uniforce - SHW Uniforce 5 - UFZ 5 - UFZ5L - UFZ 5 L - MBM Milling Machine - MBM Machine

Condition: ready for operation (used), Slideway grinding machine SFBZ 1800x4000 Length of grinding max, mm 4000 Width of grinding max, mm 1800 Dstance between column mm 2200 Dsdsuug A Ejpfx Ap Ijwc Height of grinding max, mm 1250 Table size, mm 4000 x 1800 Grinder wheel size max, mm 630 x 100 x 305 Weight of workpiece max, kg 15000 Weight of machine, kg 56.000

Condition: used, Year of construction: 2016, x-axis 6.800 mm y-axis 4.000 mm z-axis 1.500 mm Dodpfx Aozf Nn Sop Iowc Control iTNC 530 HSCI Heidenhain distance between columns max. 5.090 mm distance spindle center to table 1.825 mm type 175149A-0007 turning speed range - main spindle max. 19.800 min/-1 power capacity - main spindel 20 kW tool taper HSK-A63 swivellable B: +115° / -115 ° rotatable C: +/- 200 ° type 178099-0005 turning speed range - main spindle max. 10.020 min/-1 power capacity - main spindel 20 kW tool taper HSK-A100 swivellable B: +115° / -115 ° rotatable C: +/- 200 ° table surface area 6.000 x 3.000 mm max. table load 50,0 t height over floor 100 mm number of T-slots 12 T-slot - width 28H12 mm T-slot - distance 250 mm number of toolpositions 62 (38+24) pos. number of toolpositions HSK A63: 37+1 pos. number of toolpositions HSK A100: 23+1 pos. max. tool diameter HSK A63: 52 mm max. tool length HSK A63: 250 mm max. tool weight HSK A63: - kg max. tool diameter HSK A100: 80 mm max. tool length HSK A100: 450 mm max. tool weight HSK A100: - kg rapid traverse ( X / Y / Z ) 40.000 mm/min rapid traverse B/C: 4.320 °/min feed speeds X/Y/Z: 30.000 mm/min Working speed B/C: 2.160 °/min Accelaration max. 3,2 m/s² x-axis 6.800 mm y-axis 4.000 mm z-axis 1.500 mm b-axis +115° / -115 ° c-axis +/- 200 ° total power requirement 180 kVA dimensions of the machine ca. 12,5 x 15,0 x 7,0 m 5-Axis-High-Speed-Gantry-Big-Machining-Center DROOP & REIN - FOGS 40 60 C - Fork head

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor Dwjdpfx Ajthuzpop Isc - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: good (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: C4655, grinding length: 5,000 mm, grinding width: 500 mm, Sanding length: 5000 mm Sanding width: 500 mm Workpiece height: 250 mm spindle diameter in front bearing: 190.5 mm pivotable 0.7° Max. Torque: 1771 Nm Max. speed: 593 min/-1 Feed: infinitely variable 20-35,000 mm/min Trapezoidal segment head diameter 800 mm with Trapezsegmenten: 94/103x38x200mm Marposs measuring device Hydraulic upper part clamping and swiveling Sanding mist extraction system: Hydrocyclone cleaning system Machine weight approx. 27.6 tons Space requirement approx.: 11.2 x 4.3 x 3 m Dodpfeq U Ihvsx Ap Iswc

Condition: new, The unit is NEW, complete with controls, diesel tank, exhaust and batteries. Net price: € 39980 Gross price € 47576.12 Dodenkcaaspfx Ap Iswc Technical specifications Engine : Doosan & P126TI-II, 6 cylinder, water-cooled, turbocharged Generator: Newpower NW/N 330 Continuous power: 240 kW / 300 kVA Maximum power: 264 kW / 330 kVA Control system: Deep Sea DSE 7320 Connection: direct connection (Optional circuit breakers, outlets, automatic transfer switch.) Frequency : 50 Hz & 3-phase Voltage: 400/230V RPM : 1500 rpm. Dimensions (LxWxH): 3960x 1356x2167mm Weight: 3200 kg Network monitoring, soundproof Shipment: - Worldwide transport is available at an additional cost - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: used, Year of construction: 2012, Technical details: max. wheel diameter: 260 mm gear width: 320 mm max. module: 5 weight of the machine ca.: 21 t Dsdpfsy Amllox Ap Iswc dimensions of the machine ca.: 8,71 x 5,97 x 3,49 m no. of teeth: 1...999 max. helix angle: +45/-45 ° pitch min.: 0,1 mm pitch max.: 1000 mm X-axis: 345 mm y-axis: 250 mm Z-axis: 320 mm b-axis: 360 ° c-axis: 360 °

Condition: excellent (used), Year of construction: 2008, operating hours: 82,500 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,750 mm, feed rate X-axis: 65 m/min, feed rate Y-axis: 65 m/min, feed rate Z-axis: 65 m/min, spindle speed (max.): 20,000 rpm, rapid traverse X-axis: 65 m/min, rapid traverse Y-axis: 65 m/min, rapid traverse Z-axis: 65 m/min, torque: 63 Nm, overall weight: 90,000 kg, Equipment: rotational speed infinitely variable, First commissioning: 2008 Control system: Heidenhain iTNC 530 incl. handwheel HR420 X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,750 mm A-axis: -120 / +95° C-axis: ± 360° Maximum workpiece size 3,800 mm (X-direction) 1,800 mm (Y-direction) 1,150 mm (Z-direction) Can be machined in 5 axes (90° free A-axis) in a single setup using a 300 mm long tool. Machine operating hours: approx. 83,000 h Total spindle hours: approx. 37,000 h Machine bed (can be installed flush or above ground!) Dimensions: 5,000 x 2,250 x 300 mm - manufactured from EN-GJL-250 9 T-slots according to DIN 650-28H12 with a spacing of 250 mm and 125 mm from the edge 2-axis milling head, inspected by the manufacturer! Spindle power: 20 kW Spindle speed: max. 20,000 min-1 Torque: max. 63 Nm Tool holder: HSK 63A Tool clamping: hydraulic Holding torque (clamped) A & C axis: 2,000 Nm Drive system for linear axes Feed rate X, Y, and Z axes: up to 65 m/min Axis acceleration X, Y, and Z axes: up to 5 m/s2 Connection data Voltage: 400 V Frequency: 50 Hz Power consumption: 130 kW Dimensions, weights Machine footprint without peripherals: approx. 7,500 x 8,500 x 6,600 mm Total weight: approx. 90,000 kg Color Enclosure, portal, control cabinet: RAL 7035 light gray Milling head and applications: RAL color 5002 aquamarine blue Additional equipment - Minimum quantity lubrication - 50-position tool changer - Work area cover Condition of the machine The milling head has been freshly inspected by the machine manufacturer, thus partially overhauled and fully functional. Completely new machine bed from Stolle! Dwodpfx Aezkuirjp Isc The additional modules shown on the machine bed are not included in the scope of delivery. The extraction systems and ducts shown are also not included in the scope of delivery. The previous owner was an established Formula 1 team from Central Europe. The machine was always under a maintenance contract with the manufacturer. Currently, the machine is disassembled and stored. However, an inspection is still possible at any time by arrangement.