Pipe-Bending Machine

UWM TR 60

Condition: used, Year of construction: 1993, Technical details: tube diameter: 80 mm tube diameter min.: 6 mm control for program: Gelma MM-1 tube pipe draw up length: 1800 mm weight of the machine ca.: 0,232 t dimension machine xH: 1,9 x 0,7 x 1,3 m Semi-automatic PIPE BENDING MACHINE Operating modes are manual but also semi-automatic Application: for multiple bending of pipes The swivel unit with bending preselection for 3 different bending angles in single and automatic mode. The machine is currently equipped with a stop bar for tube size Ø 10mm for 6 angle settings. The bending machine is movable/adjustable. Equipment/accessories: Dedpju Ibyysfx Ahhskw 6 cam rods/stop rods 6 control disks Bending tool for Ø 12mm *

Year of construction: 2004, condition: good (used), machine/vehicle number: 0441057, Offer 23300 Technical data: Dkodpepug D Ejfx Ahhjw - Sanding belt dimension 75 x 2000 mm - surface grinding opening 75 x 300 mm - support vice - angle adjustable 90° - 30 ° - grinding belt speed 15 + 30 m/sec. - possible contact rolls Ø 20 - 76 mm - contact roller length 75 mm - drive 400 V / 2,2 / 3 kW - drive speeds 1440 / 2880 rpm - 1 piece contact roll 48 mm - space requirement approx. W 800 x H approx. 1000 x D 1300 mm - weight approx. 250 kg

Condition: good (used), Year of construction: 1995, Offer 24315 Technical data: - Sanding belt dimensions 2000 x 100 mm - Surface sanding opening 400 x 100 mm - Support vice - angle adjustable 90° - 30 ° - Support fine adjustment via hand wheels - Sanding belt speed 30 m/sec. - Contact wheel / sanding roll Ø 42 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 225 kg - 10 contact grinding rollers approx. Ø 10 + 18 + 22 + 24 mm - 28 + 33 + 36 + 48 + 60 + 68 mm Dksdpfx Ahet Stfhshsw

Year of construction: 2009, condition: new, Belt dimensions: 2000x100 mm Dsdox Davspfx Ahhekw Belt speed: 30 m/s Angle adjustable from 30 to 90° Power: 3 kW, 4000 V, 50 Hz Weight: 200 kg Rollers for grinding reamers: 3/4"; 1/2"; 1"; 1 1/4"

Condition: new, neu ca. 4 Wochen ab Auftragse Italien 3620 € 38 mm 245 mm 300 mm 320 mm 23 kg 19 cm³ 38 x 1,5 mm Djdpfswiqxisx Ahhskw 38 x 1,5 mm 35 x 3 mm 30 x 2 mm 35 x 1,5 mm 42 x 1,5 mm 42 x 1,5 mm 50 x 2 mm 50 x 2 mm 50 x 4 mm 20 mm 10 x 25 mm 25 x 20 (stehend), 25 x 1 mm 180 mm 36 mm 10 mm 2,8 U/min 0.9 kW digital adjustment of the bending angle from 0 - 180 ° single phase motor 220V / 900W electric engine brake indicator light for indicating overload basement made of cast iron, suitable for mounting a tripod (tripod not included) 90° bend in 6 seconds foot pedal without tools OPTIONAL EQUIPMENT: tripod € 345,-

Condition: as good as new (ex-display), Year of construction: 2025, tube diameter 10.0 - 42.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 54.0 mm CU/Alu bar material - diameter 30.0 mm wall strength 2.0 mm revolutions per minute 1.30 U/min voltage 400 Volt total power requirement 1.5 kW weight 110 kg range L-W-H 400 x 450 x 570 mm Exhibition machine - like new Dkjdpfxsxab Hvo Ahhow never been used (!!) Special price upon request - Steel tube capacity: 42.0 x 3.56 mm - Gas tube capacity: 1" 1/4" Gas x 3.5 mm - Square profile capacity (FE 42) 40 x 20 x 2.6 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8" Gas Features: - Patented quick tool change system - One bending speed - Digital machine display - 1x freely movable foot switch - 1x bending tool set included * Additional segments available upon request for an additional charge * ERCOLINA tool holder

Condition: new, Year of construction: 2009, 30 mm 30 mm L-beam 20 x 20 x 4 mm flat steel 25 x 6 mm Axis diameter 20 mm work speed 11 U/min total power requirement 0,2 kW weight of the machine ca. 80 Kg dimensions of the machine ca. 0,6 x 0,6 x 1,5 m Profile bending machine with: - Foot pedal for right/left rotation Dedpjv Skzdefx Ahhokw - Digital display - 1 set of standard rollers - 3 rollers are driven - Horizontal or vertical operation

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring mill, T-slot plate, pallet changer -Quantity: 1 piece (a second plate is still available ID 21153) -Width: 1465 mm -Length: 4930 mm -Working height: 860 mm -Sheet thickness: 35 mm -Plate height: 315 mm -Plate with: supporting ribs -Groove width: 51 mm -Slot spacing: 292 mm -Transport dimensions: 4930/1640/H860 mm -Weight: 6155 kg Djdpfx Ajd Ehflohhokw

Condition: used, Year of construction: 1991, width of the strips 150 mm band length 2.000 mm motor 400 V loading area 450 x 160 mm total power requirement 4,0 kW dimensions of the machine ca. 1,10 x 0,70 x 1,15 m Dkodpfjy Ty A Eox Ahhow - Serial-No.: 200.184

Condition: as good as new (ex-display), Flat, upright / Ø: 60 x 10 mm / 500 mm Solid, square / Ø: 35 x 35 mm / 900 mm Tube, round / Ø: 70 x 2 mm / 1000 mm Shaft diameter: 50 mm Roll diameter: 138 mm bending speed: 4,5 / 9 m/min voltage: 400 V motor power: 0,6 / 0,9 kW dimensions WxDxH, approx.: 780 x 1040 x 1470 mm Weight, approx.: 360 kg Equipment: - Machine in stable welded steel construction - Roll drive via gearbox - Hardened rolls (standard roll set included) - Shafts hardened and ground - All switching and operating elements on mobile control panel with foot pedal for right/left rotation - Manuel adjustable straightening rolls - Can be used horizontally and vertically Options on request: Dsdpfxepxmauo Ahhekw - Hydraulic top roller infeed - Two-stage motor - Digital display - Brake motor for the production of precision sheets - Roll sets