Fish processing machine

VMK 18 Filleting and Heading Machine

Condition: excellent (used), GEA Westfalia separator for dewatering industrial and municipal waste water sludge. In excellent condition. Dedpfx Abjyf Hw Sj Njwc

Condition: excellent (used), Year of construction: 2020, operating hours: 829 h, Baader 588 Filleting Machine 2020, low hours, with spares Complete with IS026 Header Baader 61 knife sharpener 6 station trimming Line Infeeds/outfeeds, various conveyors Compressor Dodpfx Aeyq Sbyjb Njwc Rare package!

Condition: excellent (used), Year of construction: 2008, Fish Skinning Machine Make: Steen Dwedpfjw Sx Ezjx Ab Njc Model: ST600 Built 2008 Serviced and maintained

Condition: good (used), Year of construction: 2019, Kaj Olesen TWP54 Pin Bone remover Serial: 10810 2019, stainless pin bone remover, capacity up to 350 - 700Kgs per hour, belt dimensions 1650mm x 350mm, 1Ph Dwjdpjv Uquiefx Ab Nsc

Condition: like new (used), VMK Automatic Heading Machine for Pelagic Fish VMK industrial heading machine for pelagic fish, designed to automate the cutting and removal of fish heads within industrial processing lines for seafood products. The equipment allows for the continuous performance of feeding, positioning, and heading operations, reducing manual handling and facilitating a uniform flow towards subsequent processing stages. Its industrial construction, primarily in stainless steel, is specifically designed for operation in humid and demanding environments typical of fish processing plants. MAIN FEATURES -Manufacturer: VMK -Type: Automatic fish heading machine -Application: Pelagic fish -Function: Cutting and removal of the head -Controlled feeding and positioning of the fish -Automatic and continuous processing -Integrated transport system -Multiple feeding channels -Construction primarily in stainless steel -Hygienic design for the food industry -Robust construction for industrial use -Accessibility for cleaning and maintenance -Integrable into existing fish processing lines -Suitable for continuous operation in seafood processing plants APPLICATION The VMK heading machine is designed to be integrated into the preparation area of an industrial processing line for pelagic fish. The fish is fed and guided in a controlled manner towards the cutting area, where the heading operation is performed automatically. Subsequently, the product can continue to the next preparation or processing stages. It can be integrated with: Fish feeding systems Conveyors Sorting and grading machines Cutting and evisceration equipment Filleting machines Fish washers Inspection tables and belts Freezing systems Packaging equipment Complete fish processing lines APPLICATIONS Particularly suitable for canning industries, fish processing plants, and companies specializing in seafood products that need to automate the preparation of pelagic species. It can be used as part of lines designed for the processing of sardines, mackerel, and other species of pelagic fish, depending on the format, product dimensions, and installed configuration. Machine available for inspection. Dwjdpjyuffyjfx Ab Nsc Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2014, Marel MS2730 Filleting Machine with Back Bone Trim High-performance automatic salmon filleting machine Available from August / September. This Marel MS2730 Filleting Machine is equipped with an automatic Back Bone Trim system, delivering excellent fillet yield and consistent product quality. The machine has been professionally maintained by Marel on an annual basis and is currently in good working condition. (Complete overhaul in 2018). Designed for medium to high-capacity fish processing operations, the MS2730 automatically adjusts to different fish sizes, ensuring maximum yield while reducing manual labor. Key Features - Automatic salmon filleting machine - Equipped with Back Bone Trim - High fillet yield and excellent cutting accuracy - Automatic adjustment to varying fish sizes - User-friendly touchscreen control - Hygienic stainless-steel construction - Easy access for cleaning and maintenance - Compact footprint - Annual maintenance carried out by Marel - Good working condition Technical Specifications - Manufacturer: Marel Dwsdpfx Abezl Syds Noc - Model: MS2730 - Capacity: Up to 25 fish per minute - Fish size: Approximately 1.5 – 8 kg - Power supply: 3 × 400 V + N + PE (50 Hz) - Power consumption: Approx. 5.5–7.0 kW (depending on configuration) - Water consumption: Approx. 15 L/min - Compressed air: Approx. 230–250 L/min at 6–8 bar - Dimensions (L × W × H): Approx. 3,150 × 1,035 × 1,980 mm - Weight: Approx. 1,450 kg (configuration dependent) Condition The machine has been serviced annually by Marel and remains in good operational condition. It is still installed and can be inspected under power by appointment. Availability: August / September. For additional information, pricing, or to arrange an inspection, please contact us. More photos and full specifications: / * Manufacturer: Marel * Model: MS2730 * Fish size: Approximately1.5 – 8 kg * Power consumption: Approx.5.5–7.0 kW(depending on configuration) * Weight: Approx.1,450 kg(configuration dependent)

Condition: excellent (used), Year of construction: 2022, operating hours: 5,098 h, Baader 581 Pro Filleting Machine The BAADER 581 Pro is one of the latest innovations in the filleting section from BAADER. It represents probably the most powerful and advanced filleting machine in the world. These in-depth studies resulted in the development of the BAADER 581 Pro’s most innovative optional feature: the dynamic back knife. The optional dynamic back knife offers outstanding possibilities for increasing the yield of the fillet and makes BAADER 581 Pro a yield winner. Depending on the fish's anatomy, the knives are automatically adapting to the upper back area of every single salmonid leaving as little flesh on the frame as a hand filleter would. Very narrow in the tail section but opening up to the wider backbones in the neck area. The result changes the common understanding of yield expectations for machine filleting. The new layout of the BAADER 581 Pro has a 20% smaller footprint compared to its predecessor by streamlining the housing. The recently designed housing also reduces processing noise for a quieter production atmosphere. It features individual fish measurement, offering operational flexibility for a wide range of fish species and different kinds of conditions. High flexibility to different species and conditions Adaptable recipe management system allows for changes during operation Individual fish measurement High operational flexibility for different fish species and conditions Optimal fillet quality Computer controlled active cutting tools Smooth surface as a result of reduced fillet stress during processing No gaping Working range without belly trim (approx.):  Salmon (HoG): 2 - 7 kg Sea Trout (HoG) : 1.8 - 5 kg Dwedpozktd Iefx Ab Noc Sea Trout (HoG): 1.- 4 kg * Working range with belly trim (approx.):  Salmon (HoG): 2 - 5.5 kg Sea Trout (HoG) : 1.8 - 5 kg Sea Trout (HoG): 1.- 4 kg * Other species on request, like: Wild caught coho (H&G): 2 - 4 kg Wild caught sockeye (H&G): 2 - 4 kg Manufacturer: Baader Model: 581 Pro Year: 2022 Production hours: 5.098 hours Capacity: Up to 25 fish/min. Species: Salmon / Coho / Sockeye / Trout / Tuna / Similar Power: 400V / 50Hz / 13kW Air: 6 bar / 50l/min. Machine dimensions LxWxH: 5.566x2.795x2.523 mm Machine weight: 3.200 kg.

Condition: excellent (used), Year of construction: 2013, We offer a used KROMA GUTMASTER 1200 mackerel gutting and injecting line from 2013. This industrial processing line is designed for the automatic gutting, cleaning, waste extraction, and brine injection of mackerel in fish processing plants. The machine is suitable for fish weighing 200–500 g and combines several operations in one continuous workflow. The fish is manually placed in special conveyor pockets, head-first and belly-up. As it moves through the line, the machine measures the fish and automatically adjusts the knives to its size. The system opens the belly, separates the gills, removes the entrails using the VACMASTER 200 vacuum system, cleans the inside of the fish, removes kidney blood, and then transfers the product to the brine injection section. The line is equipped with the BRINEMASTER automatic brining module, located directly after the cleaning section. A special injection head with 50 needles, each 2 mm in diameter, injects brine into the fish. After brining, the product is transported by conveyor to an inspection table or directly into containers. The KROMA GUTMASTER 1200 is made of acid-resistant materials and AISI 304 stainless steel, ensuring durability, hygiene, and resistance to demanding production environments. The machine is also equipped with CIP and CWS cleaning systems, helping to reduce cleaning time and improve sanitary working conditions. If there is no fish in a conveyor pocket, the working units are automatically deactivated, which reduces wear and energy consumption. Technical specifications: Dwodezkizvepfx Ab Noc Manufacturer: KROMA Model: GUTMASTER 1200 Year of manufacture: 2013 Application: mackerel gutting, cleaning, and brine injection Fish size: 200–500 g Capacity without brine injection: up to 50 pcs/min Capacity with brine injection: up to 35 pcs/min Total power: 8 kW Control: microprocessor-based PLC Vacmaster 200: automatic vacuum gut-removal system Brinemaster: 50 needles, 2 mm diameter Outfeed conveyor: yes CWS cleaning system: yes CIP cleaning system: yes Basic spare parts kit: included in the price Operating staff: 2–3 people Weight: approx. 1000 kg Dimensions: 5100 / 6100 mm with conveyor x 600 x 1600 mm Main advantages: automatic gutting, cleaning, and brine injection in one line, high capacity of up to 50 fish/min without brining and up to 35 fish/min with brining, suitable for mackerel weighing 200–500 g, VACMASTER 200 vacuum system for entrail removal, BRINEMASTER brine injector with 50 needles, stainless steel and acid-resistant construction, CIP and CWS cleaning systems, PLC control, basic spare parts included in the machine price.

Condition: used, Year of construction: 2010, functionality: fully functional, Curio C-427-S Fish Heading Machine – 2010 Used Curio C-427-S automatic fish heading machine for whitefish processing. The machine is designed for automated removal of fish heads and can be integrated upstream of a filleting machine. Machine details: - Manufacturer: Curio - Model: C-427-S - Year: 2010 - Serial no.: EH091020 - Application: whitefish heading - Electrical supply: 400 V / 50 Hz / 3 phase - Current: 16 A - Stainless-steel construction - Pneumatic controls - Variable-speed drives - Operator control panel - Emergency-stop system Suitable for processing: Dwsdsz Iav Njpfx Ab Nec - cod - haddock - saithe - pollack - other similar whitefish species Features: - automatic heading process - stainless-steel frame - operator infeed table - adjustable machine speed - forward / reverse jog - pneumatic adjustment system - electrical cabinet - frequency converters - emergency stop - safety guarding - integration possibility with downstream filleting equipment The C-427-S has historically been used together with Curio C-189-L filleting machines as part of complete whitefish processing systems. Machine available for inspection. Additional photographs and information available on request. Price on request.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Frozen Block Saw/Slicer – Kraftschneidmatic 900 SZ Manufacturer: Ballweg + Bottner GmbH Model: Kraftschneidmatic 900 SZ Serial number: 72000910 Year of manufacture: 2017 Power supply: 400 V / 50 Hz / 16 A Djdew Trt Ispfx Ab Njwc Rated power: 1.1 kW Weight: 820 kg Dimensions: 1200 × 1350 × 2200 mm The Kraftschneidmatic 900 SZ is an industrial machine designed for slicing frozen blocks. The unit features a robust steel construction, intuitive control panel, and high cutting precision.