Indexing device

Walter HU 160 N/R

Condition: used, Technical specifications: X-axis travel: 700 mm Spindle speed: up to 1500 rpm Feed rate: 12 - 1000 mm/min Table size: 1100 x 250 mm Swiveling head: yes Dimensions, approx.: 1750 x 1600 x 1850 mm Ledpfx Aoxtnn Tjl Tsrn Weight, approx.: 1900 kg

Condition: excellent (used), Herringbone Gear Generator MDV 2000 MDV 2000 Characteristics: Max. wheel diameter: 2000 mm Min. wheel diameter: 50 mm Max. module: 12 Min. module: 3 Lsdpfx Alofx Ibns Tsrn

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15 - 90 U/min total power requirement 3,0 kW Lredpfx Aefg Rlcel Tsn weight of the machine ca. 0,68 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic, vertical, linear-guided automatic saw for use of HSS saw blades to make series cuts from 60° left to 45° right steel. The machine also works in semi-automatic cycle. CNC machine with multiprocessor and two with MEP control, latest generation controlled axes that make it possible to achieve 1000 with the same material thickness different cutting programs, each with a different cutting length and number of pieces program.

Condition: new, functionality: fully functional, turning diameter over cross slide: 280 mm, spindle bore: 58 mm, turning diameter over bed slide: 470 mm, center height: 235 mm, turning length: 1,000 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,150 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,800 kg, quill mount: MK 4, Maximum height: 235 mm Distance between centers: 1000 mm Spindle bore: 58 mm Spindle nose according to DIN 55029: Camlock D6 Motor power: 5.5 kW Spindle speed range: 20-2000 rpm Features include: Lredpfx Ascirniel Ton Hardened and precision-ground Z-axis guide rails Turcite coatings (on the mating surface) of the tool and cross slides Manual central lubrication system with one pump for the longitudinal and cross slides Complete coolant system with a rear splash guard and a splash guard on the slide Chuck guard Selector lever with 3 adjustable cams Machine light Fixed center Set of machine mounting plates

Condition: used, Year of construction: 1990, I - beam section - flat steel 140 x 140 x 13 mm I-beam section - upend 120 x 120 x 13 mm L-beam 130 x 130 x 12 mm round bar steel 85 mm bending capacity - flat iron 125 25 mm flat steel 65 x 65 mm Lrsdpfx Aljtt Ecdj Ten including various rollers: Pipe Ø: 219 mm (tool/roller Ø 535 mm) 140 mm (tool/roller Ø 420 mm) 273 mm (tool/roller Ø 520 mm) 203mm 168.3 mm (tool/roller Ø 500 mm) 75 mm (tool/roller Ø 400 mm) 49 mm (tool/roller Ø 420 mm) 48.3 mm (tool/roller Ø 420 mm) 22.5 mm (tool/roller Ø 420 mm) 32/32.5 mm (tool/roller Ø 420 mm) 60 mm (tool/roller Ø 420 mm)

Condition: good (used), mileage: 500,142 km, power: 338 kW (459.55 HP), first registration: 04/2014, fuel type: diesel, axle configuration: 6x4, wheelbase: 5,600 mm, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro5, suspension: steel, loading space length: 6,300 mm, loading space width: 2,470 mm, loading space height: 1,000 mm, Year of construction: 2014, Equipment: ABS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, parking heater, power mirror, trailer coupling, = Additional options and accessories = - Aluminium fuel tank - Leaf suspension - Brake booster - Remote central locking - Speed limiter - Sleeper cab - Sun visor - Parking heater - Toolbox - Power take-off (PTO) - Towing jaw = Notes = Volvo FH 460 6x4 platform with aluminium side boards, 6x4 sleeper cab, steel suspension, trailer coupling, hub reduction, Fassi F 455 - 6, ONLY 2712 WORKING HOURS, remote control, 4-point outrigger, 6 hydraulic extensions and rotator, tyres 80%. Truck is in good condition. = Further information = Technical information Number of cylinders: 6 Axle configuration Suspension: Leaf suspension Front axle: Steering; tyre tread left: 80%; tyre tread right: 80% Rear axle 1: Twin tyres; differential lock; tyre tread left inner: 80%; tyre tread left outer: 80%; tyre tread right inner: 80%; tyre tread right outer: 80%; reduction: hub reduction axles Rear axle 2: Twin tyres; differential lock; tyre tread left inner: 80%; tyre tread left outer: 80%; tyre tread right inner: 80%; tyre tread right outer: 80%; reduction: hub reduction axles Weights Lsdpfx Ajwwtlnsl Tjrn Unladen weight: 20,760 kg Payload: 5,240 kg Gross vehicle weight: 26,000 kg Operational Lifting capacity: 13,500 kg Lifting height: 1,655 cm Crane: Fassi F 455, mounted at the rear of the chassis Body manufacturer: Hydromat Condition Technical condition: good Visual condition: good

Condition: good (used), Year of construction: 1992, Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle Lrjdpfxsl Tuvdo Al Tjn -Manufacturer: steel, crane chassis with electric cable pull -Crane chassis: Type GO 24 20 16 -Traveling speed: 20 m/min -Roller pitch: 800mm -Cable: Type AS 2010 -Traction: 1000 kg / load capacity 4000 kg -Drum speed: 16 m/min / stroke 4 m/min -Lifting height: mm -Transport dimension: 1250/1180/H400 mm -Own weight: 356 kg

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm Lrodpfxsfx Hv Ho Al Tjn dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

Condition: good (used), Year of construction: 1998, Max. Pitch circle diameter External gearing 300 mm Max. Pitch circle diameter internal gearing 300 mm Max. Outer diameter of workpiece (equipment) 450 mm max. module 6 gear hobbing width -max. 100 mm Max. Helix angle (with tool Ø 125 mm) +/- 45 ° strokes - infinitely variable 130 - 1300 Hub/min workpiece weight 1000 kg Minimum distance table top - tool spindle -55 / +300 mm Maximum distance table top - tool spindle 200 mm Lredpfevu E Nujx Al Tjn Maximum distance table top - tool spindle 350 mm Manual Upright side shift +/- 25 mm Manual swivelling angle of the tool spindle +/- 0,5 ° Max. Tool speed 15 UpM Max. Workpiece speed 27 UpM Max. Tool diameter 7 Zoll voltage 400 V frequency 50 Hz Max. Line power 70 A total power requirement 48 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,27 x 3,11 x 2,87 m taper in main spindle SK 45 table hole 40 mm control Siemens Sinumerik 840 C Gleason PFAUTER gear shaping machine Mod. PSA 300 The CNC modular gear shaping machine with skiving cutter for the machining of external and internal cylindrical gears, with straight or helical involute with straight or helical involute toothing, as well as any other profile splitting process. The work cycle is controlled by a CNC unit, with specific software for machining the gears, machining. Field of application --> The PSA 300 has been designed for the production of: - Gears with straight external teeth - Gears with straight internal teeth - Gears with external helical teeth - Gears with internal helical teeth

Condition: used, Year of construction: 2001, pressure 0,2-40 t max. workpiece diameter 70 mm threading length 120 mm Control total power requirement 29 kW weight of the machine ca. 9,5 t Ljdpfx Alot Hw N To Tjrn dimensions of the machine ca. m