WALTER double-saw edger

Walter rp

Condition: new, Year of construction: 2026, - Dimensions 600 x 3,000 mm - M 56 conveyor chain with protective rollers and MS flights - 2.2 KW SEW gear motor for the feed chain drive - Automatic centering of the logs to the center of the rotor - Dimensions 1,500 x 4,500 mm - Machine for 6 - 35 cm logs Hodju Rpibopfx Ai Nsfi - 18.5 KW drive motor for the rotor - 4 pre-cutters - 4 main cutters - each with hydraulic pressure system - 1 pair of centering rollers in front of the rotor - 1 centered pair of rollers after the rotor - 4 KW SEW geared motor for driving the rollers - 30 m/min feed speed - 1 pair of non-driven rollers in the pull-out

Condition: excellent (used), functionality: fully functional, Four-side planer Weinig Profimat 22N Working width: 220 mm Working height: 120 mm Number of spindles: 6 Spindle arrangement: Bottom – 4 kW Right Left – 5.5 kW Top – 5.5 kW Bottom – 4 kW Universal – 4 kW Hedpfxjxzbn Ne Ai Nofi Feed speed adjustable via variator: 6–22 m/min Feed motor power: 3 kW Spindles with adjustment

Condition: good (used), WEINIG Quattromat four-sided planer max planing width 220mm max planing height 120mm 4 heads, heads included bottom spindle - 4KW, right and left 7.5KW, top - 5.5KW Hfedpfx Aisv Hqn Te Nei feed on cardan shafts with smooth adjustment electric lifting up and down electric adjustment of planing width branded machine preserved in good condition

Condition: good (used), Technical data: Planing width: up to 300 mm Planing height: up to 130 mm Number of heads: 6 Hfjdpfxjw Sh Dms Ai Nji bottom – 5.5 kW right – 5.5 kW left – 5.5 kW top – 5.5 kW universal 360° – 5.5 kW bottom – 7.5 kW Feed motor: 2.2 kW, stepless adjustment via inverter 4 feed rollers in the table

Condition: new, Year of construction: 2026, I am selling this excellent helper in a carpentry workshop or a smaller sawmill for preparing plastered lumber and producing boards. This is a double-blade edge saw / Rip saw KUSING OP-400 ECO. Motor power: 2x 4kW Maximum cutting height: 55mm Feed speed: 4-18 m/min Maximum material width: 600mm Maximum width between blades: 400mm The machine's primary purpose is as a complementary machine to smaller band saws. The machine rapidly speeds up the process of producing boards, saving time in their production. With a special option, it is possible to adjust and extend individual shafts by 55 to 105mm, thanks to which you can place up to 4 blades in the machine at once. Motor 55 KW. Total weight approx. 4000kg. Blades and adjusting rings included. KUSING OP-400 ECO Double-Blade Rip Saw Are you looking to speed up board production in your carpentry workshop or smaller sawmill? The KUSING OP-400 ECO is the perfect partner for preparing planed lumber and turning logs into boards quickly and efficiently. _____ Why Choose the OP-400 ECO? • High Productivity: Dual 4 kW motors ensure consistent cutting power, allowing you to process lumber faster than with a single-blade setup. • Versatile Cutting Capacity: o Max. Cutting Height: 55 mm o Max. Material Width: 600 mm o Max. Distance Between Blades: 400 mm • Efficient Feed System: Adjustable feed speed from 4 to 18 m/min gives you precise control over material flow for different wood densities and board thicknesses. • Expandable Blade Configuration: With the optional shaft-extension kit, you can extend each shaft from 55 mm up to 105 mm, accommodating up to four saw blades simultaneously. This means you can rip multiple boards in a single pass, dramatically reducing setup times. • Ideal Secondary Machine: Designed as a complement to smaller bandsaws—speed up your workflow by rough-cutting logs into boards before final dimensioning. Technical Specifications • Motors: 2 × 4 kW • Maximum Cutting Height: 55 mm • Feed Speed Range: 4 – 18 m/min • Maximum Material Width: 600 mm • Max. Blade Gap (between blades): 400 mm Hfodpfsx Utv Ijx Ai Noi • Shaft Extension (optional): 55 – 105 mm (fits up to four blades) The machine is in stock in Kežmarok, Slovakia. Available immediately.

Condition: good (used), Technical data: Manufacturer: TSN Year of manufacture: 1988 Serial number: 2680 Maximum planing width: 280 mm Maximum planing height: 130 mm Spindle diameter: 40 mm Tool diameter: min. 120 mm, max. 200 mm Spindle rotation speed: up to 6000 rpm Working heads (5 units): Lower – 5.5 kW Right – 5.5 kW Hfjdpfx Aiew Sh Dte Nji Left – 5.5 kW Upper – 7.5 kW Universal – 5.5 kW Feed motor: 2.2 kW, stepless speed control

Condition: excellent (used), Four-sided planer Weinig Profimat 22 N, 6 heads – the last one is universal. Tools included. Work video of the machine available. Very good condition. Ready for operation. Hodpfx Aioxyxaao Nefi

Condition: used, Edger saw with output conveyor Manufacturer: Larmet Year: 2014 Edge banding machine: Length: 193 cm Width: 85 cm Height: 220 cm Motor power: 18.5 kW Board separating conveyor: Length: 615 cm Width: 68 cm Height: 190 cm Roll length: 40 cm Hedpfx Aiexyh U Ho Njfi Motor power: 1.5 kW

Condition: excellent (used), functionality: fully functional, Working width 220 mm Working height 120 mm 5 spindles Spindle arrangement: bottom/right/left/top/bottom Spindle diameter 40 mm Hfedpfx Aexxtuvoi Nji Motors: 4 kW, 5.5 kW, 5.5 kW, 4 kW Table length 198 cm Table lubrication Stepless feed speed adjustment Pneumatic pressure on feed rollers Head adjustment in two axes Electric adjustment of top head – 0.25 kW Feed motor power 2.2 kW

Condition: used, Multi-saw Hjdpfxoxf Hm Es Ai Nsfi Manufacturer: Standart Hjo Model: SM 80 Length: 1.55 m Width: 1.15 m Height 1.25 m