Lead/traction spindle lathe

WEILER Condor VS 2

Condition: good (used), 1 used lead and feed screw lathe Make: Weiler Model: Condor VS 2 Technical Data: Centre height: 160 mm Centre distance: 800 mm Spindle bore: 40 mm Bed width: 240 mm Speeds: 12 - 2800 rpm Drive power: 3 kW Tailstock taper: MK 3 Quill stroke: 110 mm Fodpfx Agjw Rcrcsdjpb Feeds: 0.037 - 1.253 mm/rev Weight, approx.: 800 kg Dimensions (W x D x H), approx.: 1930 x 880 x 1470 mm Equipment: 3-jaw chuck Quick-change toolholder system Multifix

Condition: new, turning diameter 420 mm turning length 1500 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 590 mm centre height 210 mm Turning length in the bed bridge 260 mm reus 16 (45-1800) U/min tail stock MK 4 quill stroke 120 mm diameter of quill 50 mm spindle taper DIN ISO 702-2 Nr. 6 spindle bore 52 mm spindle cone MK 6 feed längs 17 / 0,05 - 1,7 m/min feed plan 17 / 0,025 - 0,85 m/min total power requirement 4,6 kW weight of the machine ca. 1340 kg dimensions of the machine ca. 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 Fodpfjk Egrpox Agdopb - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: excellent (used), spindle bore: 38 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 200 mm, turning length: 750 mm, total length: 1,700 mm, total width: 650 mm, total height: 1,500 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 12 rpm, overall weight: 800 kg, Equipped with: – Tailstock – Multifix tool holder Fpodpfx Agowxq Icedeb – RÖHM 3-jaw chuck (Ø 160 mm)

Condition: good (used), WEILER CONDOR VS 2 from university (test laboratory) - Guideways "as new" - Centre height: 165 mm - Swing diameter over bed: 330 mm - Distance between centres: 800 mm - Speed range: 28-2800 rpm - Automatic longitudinal / cross feeds - Spindle bore: 40 mm - Threads / Metric / Inch etc. Fsdpfx Ajxc H Tyogdepb - Collet quick-change system incl. collets - Four-jaw chuck Röhm - Face plate - Four-jaw face plate - Chuck guard - Multifix with inserts - Emergency stop - Documentation Dimensions: LxWxH 2x0.8x1.6 m / Weight 900 kg Subject to errors / input mistakes.

Condition: used, L + Z Lathe WEILER Type LZ PRIMUS GS Machine no. No. 2461 Year of construction approx. 1990 Center width 400 mm Turning diameter over bed 250 mm Center height above bed 125 mm Turning diameter over support 140 mm Center height above support 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm 18 steps Feed lengthwise and flat Chuck flange short taper DIN 55022 size 4 Inner tailstock taper MK 2 Drive power 1.1 kW and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw lathe chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change tool holder with 1 interchangeable cassette - Set of collets Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centering tip for collet chuck holder - Emergency stop - Hinged chuck guard - Splash guard - Machine light - electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg good condition Fpodortd Uwopfx Agdjb

Condition: excellent (used), Year of construction: 1988, wire working range: 0,1 - 1,3 mm cutting length: 5 - 70 mm output: 400/min. Fsdpj Syv Tofx Agdopb complete with ciller and motorized decoiler

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 103 mm Tip width 1000 mm Circumference diameter over bed 500 mm Fpjdpfx Aod I A Dhjgdeb Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Quilltravel 150 mm Quill holder Morse cone 5 Motor power 7.5 kW Weight 2,750.00 kg Dimensions 2500 x 1100 x 1380 mm

Condition: used, Year of construction: 1987, turning diameter over bed 0560 mm Fpodpfx Agow Ny S Djdjb turning diameter over slide rest 325 mm turning length 1500 mm spindle bore 62 mm spindle turning speed range 11,2 - 2240 U/min total power requirement 9 kW weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,6 x 1,6 m With Multifix incl. 2 holders, chuck, rotating center and DRO.

Condition: new, Bernardo Universal Turning Machine Master 360 Pro Peak 1000 mm Peak height 180 mm Orbital diameter via bed 360 mm Orbital diameter via creation * 502 mm Orbital diameter via paddling sled 220 mm Bed width 185 mm Spindle hole 52 mm Spindle intake A4 55029, D1-5 Speed range (8) 70-2000 U/min Area Longitudinal Pros (32) 0.052-1,392 mm/U Area of planning precurs (32) 0.014-0.380 mm/U Metric threads (26) 0.4-7.0 mm Customs thread (34) 4-56 Gg/1 " Pinol diameter 42 mm Pinoline path 100 mm Pinol intake MK 3 Engine drop-off power S1 100% 1.5 kW (400 V) Engine recording power S6 40% 2.2 kW (400 V) Machine Measurement (B x T x H) 1825 x 750 x 1600 mm Weight about 576 kg * Bed length removable: 205 mm Delivery Fsdpfx Agod I H Izedepb • 3-axis digital display i200 with LCD display • 3-baking lining DK11-200 mm/D5 • Planboard 200 mm/D5, according to A4 55029 • Fixed bezel-passage diam. max 70 mm • Running bezel-passage diam. max 60 mm • Coolant equipment • First filling with Shell Tellus 46 • Extractable late newfir • Tension 280 mm • Quadruple steel holders • Protection device for quadruple steel holders • Slip clutch • Micrometer longest strike • Thread watch • LED machine light • Reducer sleeve • Changes • 2 centering tips • Foot pedal with braking function according to CE • Engine with magnetic brake according to CE standard • Unterdesigned with drawers • Operating tool

Condition: used, Year of construction: 1955, Technical details: turning diameter over bed: 420 mm turning diameter over support: 240 mm turning length: 1100 mm turning dia. in gap: 600 mm range of revolution per miute: 24 - 900 / 8 step U/min spindle bore: 41 mm range of feed in x - axis: 0,0120 - 0,1000 mm/U range of feed in y - axis: 0,0062 - 0,0302 mm/U tailstock quill taper MT: 3 tailstock quill adjustment: 220 mm total power requirement: ca. 4,0 (ohne Gewähr) kW weight of the machine ca.: 1,2 t dimension machine xH: 2,3 x 0,9 x 1,3 m Equipment: 3-jaw chuck Ø 200mm Tool holder 4-way, swivelling 30° right/left T-slot for copying device Fsdpsu Ix D Ajfx Agdepb Driving disc *