Lathe - cycle controled

WEILER E 80 x 4500

Condition: used, Year of construction: 1989, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1989 - workshop tested Machine no.: 2102-5561 Milling head type: 2171 Milling head number: 4393 geometric acceptance with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X-, Y- and Z-axis - Fixed table 600 x 210 (T-slot: 12 mm) Nksder En Dyopfx Afzjt - SK 40 vertical milling head with tightening thread S 20 x 2 - Coolant device - Central lubrication, electric - Operating instructions used as seen, without guarantee The machine corresponds technically the state of the year of construction at that time.

Condition: used, Year of construction: 1998, turning diameter 570 mm turning length 2000 mm control total power requirement 15 kW weight of the machine ca. 3,5 t dimensions of the machine ca. m Nkjdpfsugawfsx Afzet

Condition: excellent (used), Year of construction: 2014, operating hours: 66,600 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer you the following: Technical Data: Control: Heidenhain iTNC 530 HSCI Travel distances: - X-axis: 600 mm - Y-axis: 500 mm - Z-axis: 500 mm Main spindle: - Speed range: 20 - 18,000 rpm NC Rotary Table: - Clamping surface: 600 x 500 mm - Load capacity: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool pockets: 210 positions Equipment and Accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary/swivel table incl. table cooling - BLUM NT laser tool measurement - Calibration arbor with tool holder - Infrared probe, Heidenhain TS 649 - Preparation for 3D quickSET - Hinged belt chip conveyor - ICS, 40 bar, 600 l tank, incl. rotating viewing window, sealing air, linear measurement systems, bed flushing - Rinsing pistol - Mechanical oil and emulsion mist separator - Air blast through spindle center - Mode of operation 4 - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated arm robot Nodpfx Afsxgnz Tezskt - Pneumatic control and monitoring of the zero-point clamping system - Activation/deactivation of handling system via switch on machine operator panel - Additional rinsing in the machining area included - Preparation for job management included - Operator panel arrangement on the left included - Power supply to machine table incl. 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 - 240 bar, pressure adjustment via proportional valve technology - Extension of rotary union to 4 channels included On-time hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the pictures is not included in the scope of delivery. The machine is expected to be available from October/November 2025. The ball screw drives and linear guides in the X and Z axes have been replaced. Accessories, depicted tools, and clamping equipment are only included if specifically mentioned in the additional information. Subject to changes and errors in the technical specifications and information. Prior sale reserved!

Condition: used, Year of construction: 2007, turning diameter 300 mm turning length 600 mm control FANUC, 18i-TB Nkedpfx Ajxn Amtefzst turning diameter over bed slide 230 mm travel x1 165 mm travel z1 700 mm travel x2 190 mm travel z2 720 mm travel -y axis +/- 50 mm main spindle bore 76 mm main spindle speed 5.000 U/min main spindle drive 22 kW max. torque on the spindle 208 Nm sub spindle bore 76 mm sub spindle speed 5.000 U/min sub spindle drive 22 kW max. torque on the spindle 208 Nm tool turret 2 x 12 Stat. number of driven tool stations 2 x 12 speed of driven tools 5.000 U/min max. torque 47 Nm work piece power 5,5 kW C-axis resolution 0,001 ° rapid traverse x + z axis 20 / 40 m/min rapid traverse y-axis 7,5 m/min total power requirement 68,4 kVA weight of the machine ca. 7,8 t Accessories: collet fixture on main spindle, hydr. 3-jaw chuck make KITAGAWA, BB 208, 210 mmø, on sub spindle, various tool holders for turret, bar loader make HYDRAFEED, model MULTIFEED MX-1B for bar dia. 3 - 80 mm and bar length up to 1650 mm, chip conveyor, coolant with belt filter device

Condition: good (used), Year of construction: 2000, machine/vehicle number: 13639, Control Heidenhain X-Way 1,200 mm Y-way 800 mm Z-way 500 mm Main spindle: Speed 16,000 rpm Drive power - main spindle 17 kW Spindle Tool holder Type HSK63 Spindle diameter in front. Bearing 70 mm Upgraded Tool changer Size: 100 Swing round table: Round table diameter 800 mm Swivel range A: -15 / + 97° rotatable C: 360° max. table load approx. 1,000 kg max. tool diameter 80 mm max. tool byway. with free neighbor box. 125 mm max. tool length 300 mm max. tool weight 8 kg Feeds: Rapid response ( X / Y / Z ) 30 m/min Nkodpfoinh Rqox Afzjt Total power requirement 31 kVA Machine weight 15 tons Space requirements approx. 6.0 x 5.0 x 3.6 m other equipment - Documentation - Chip conveyors - electronic heat compensation Y- + Z-axis

Condition: used, Year of construction: 1985, greates pass round over bed 810 mm swing diameter over face slide 560 mm centre distance 00 mm bed width 480 mm slide valve travel 400 mm upper head travel 180 mm turning tool - shaft cross cut 32 x 25 mm power capacity 22 kW max. torque on the spindle 30 Nm spindle head Gr. 11, DIN 55027 spindle diameter in front bearing 152,4 mm spindle bore 106 mm turning speed range 9 - 1800 U/min turning speeds 24 Nkedpfsxn Ty Rox Afzot longitudinal feeds: 0,092 - mm/U face feeds 0,046 - mm/U metric threading 0,5-112 mm inch threading 1/4 - 56 G/1" thread - module mm thread - DP 1 - 224 Pitch tailstock quill diameter 115 mm quill stroke 225 mm taper of tail spindle MK 6 max. workpiece weight between centres 00 kg max. workpiece weight -without tailstock 750 kg 3-jaw chuck Röhm, Ø Overall size ca. 4600x1900x1600 mm weight ca. 4300 kg Number of feed stages and threads: 99 Accessories: 3-axis digital display Mobile chip guard over the entire length (plexiglass) Coolant device Rapid traverse in Z and X axes Multifix steel holder size C with 6 interchangeable cassettes Bed stop with micrometer scale Fixed steady rest - 300 mm Taper sleeve for main spindle MK 6 Travelling center point (center point) MK 6 Bed guides in very good condition!

Condition: like new (used), Year of construction: 1998, Retrofitted: 2024 Nkjdougbq Hspfx Afzst Numerical control: SIEMENS 840D Technical features Dimensions Table dimensions: 5000 x 2000 mmNumber of T slots: 13T slots dimensions: 22 mm Traverses of axis X axis traverse: 5000 mmY axis traverse: 3250 mmZ axis traverse: 1000 mmDistance between columns: 2500 mm Milling head Head type: C5E- 2 axis continuous headTool clamping system: HydraulicTaper nose: BT 50Speed range: 40 - 4000 rpmSpindle power: 37 kW / 372 Nm Feedrates Feedrate: 2 - 5000 mm/minX-Y,Z Rapid feedrate: 7200 / 12000 mm/min Weight and dimensions Max Weight on table: 25000 kgMachine weight: 40500 kgMachine dimensions: 12700 x 5070  x 4900 mm Accesories Guarding   Automatic tool changer: ATC-60Electronic handwheel: New SIEMENS 6FX2007-1AC04 Sales conditions Warranty: 6 months mechanical partsSale price (Ex Work): On request   View all technical features

Condition: used, Year of construction: 1994, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Jobs 5-axis milling machine. Model Jomach 143. CNC Fidia. Year 1994. Travels: X4000 Y2700 Z1250. A axis 190°. C axis continuous. B axis. W axis. Price: €85,000. Nkodpfx Afoxr I Scezet

Condition: good (used), Centre distance: 6500 mm Centre height: 665 mm Swing diameter over bed: 1270 mm Turning diameter over cross slide: 1000 mm Spindle speed: 3.55-710 rpm Faceplate diameter: 1200 mm X-axis travel: 600 mm Main spindle bore: 128 mm Tailstock quill diameter: 200 mm Tailstock quill travel: 350 mm Tailstock quill taper: DIN 55028 Main spindle nose: DIN 55027 Accessories: 3 steadies, documentation Nkodow R Avbepfx Afzjt

Condition: used, x-travel 1050 mm Nkodpfx Aovnh Umjfzot y-travel 600 mm z-travel 600 mm control Fanuc weight of the machine ca. 7200 kg