Clamping table

WMW 600 x 400 mm T-Nut 12 mm

Condition: good (used), Year of construction: 2012, CNC portal plasma cutting machine Manufacturer: Microstep Model: SPL PAA 9001.25 Year of manufacture: 2012 CNC control system Working area: 2,500 x 9,000 mm 1 plasma torch with Kjellberg HiFocus 280i power source 2 autogenous torches for propane Kedpfxju U Hm Aj Amzolr Oscillating conveyor table by Beuting Donaldson DFPRO12 filter unit for outdoor installation

Condition: new, empty load weight: 17,500 kg, maximum load weight: 43,500 kg, overall weight: 61,000 kg, axle configuration: 3 axles, loading space length: 7,550 mm, loading space width: 2,750 mm, loading space height: 400 mm, tire size: 245/70 R 17.5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered and lowered hydraulically -For tractor units: 6x4 or 8x4 Drop deck: -Low bed with external beams in extendable design, "SUPER LOW" design, length approx. 7,550 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking mechanism The supply lines are protected in the pull-out supports and automatically adjust to the respective drop-down bed length Rear chassis: -Rear chassis with closed outer frame, checker plate covering and continuous Prisma excavator trough approx. 1,450/900 x 505 mm, open at the rear -2 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame Axles and tires: Kljdpfx Amsh Hm Thozor -"PENDEL-AXLE", all axles with hydromechanical forced steering -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with stopcocks and locking pin for securing in raised position -Technical axle load: 12,000 kg -Hydraulic axle compensation -245/70 R 17.5 / 3PMSF tires Accessories included: -Preparation for mounting bolt-on container positioners for 1x 20ft or 1x 40ft container on the outer beams -2" kingpin -One galvanized steel end wall approx. 400 mm high -One spare wheel with holder -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Steering can be operated from the front and rear by remote control cable via pushbuttons, with axle tracking control -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw coupling -Electric hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and red at the rear -2 wooden blocks 500x250x200 mm -European reflector plates (red/yellow) at the rear of the trailer -On the gooseneck and on the rear plate on the left and right, one holder each for the warning signs including socket -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 standard grease -Load manometer for determining the axle loads including load diagram -ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,000 x 400 mm -The rear galvanized stanchions are removable (length of the body approx. 2,120 mm) -Separate air connection with air gun on the gooseneck -Duomatic air coupling from gooseneck to low bed -Gooseneck closed in the rear upper area with a removable cover -1 pair of steel ramps for bridging the mounting hooks of the low bed -Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm -Radio remote control for steering in addition to the cable remote control, with indicator lights on the receiver for tracking control 6 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting screw-on RUD rings VLBG-4 -7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -folding extensions, approx. 230 mm on each side -A layer of sand painted onto the loading surface to prevent slipping Dipper arm recess of the rear chassis closed at the front and rear with a plug-in plate -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 metallization (zinc 85% - aluminium 15%)

Condition: used, System: used piston diaphragm pump / pump Type: HMD-G-50-500 Flow rate: 40.0 m3/h Pressure: 1,6 MPa Klsdedkdi Tspfx Amzsr

Condition: excellent (used), Herringbone Gear Generator MDV 2000 Kjdpfx Amefx Ibnszelr MDV 2000 Characteristics: Max wheel diameter: 2000 mm Min wheel diameter: 50 mm Max module: 12 Min module: 3

Year of construction: 1993, condition: excellent (used), 2 centrifugal pumps Manufacturer: KSB Model: WKF 50/7 Flow rate: 5.5 l/s (19.8 m³/h) Head: 214 meters (21.4 bar) Max. temperature: 130°C Seal: Mechanical seal with flushing water connection Electric motor: VEM Kodpfoibwarex Amzslr Drive power: 30 kW Speed: 2935 rpm ! Price per unit !

Condition: excellent (used), Sunnen GH210 Horizontal Hone Year 2010 Max Stroke 8000mm, Spindle Speed:0 - 300 rpm Maximum Spindle Power: 40 Hp (29.83 kW) Maximum Stroker Power: 18 Hp (13.42 kW) Stroke Speed Range: 0 – 100 ft/min (0 – 30.5 m/min) I.D. Range: 2 – 24 inches (50.8 – 609.6 mm) Klodpfx Ajw U Uh Dsmzjr O.D. Range: 26 inches standard (660.4 mm) Maximum Part Weight: 8000 kg Approximate Machine Weight: 12,066 kg 400 VAC 50 Hz, 3-Phase (85 A) Siemens Simatic Control,

Condition: used, Year of construction: 1998, honing diameter 90 mm stroke 490 mm throat 400 mm Kljdpfxst Hw T Sj Amzer total power requirement 10 kW weight of the machine ca. 3.500 kg dimensions of the machine ca. m

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: Ksdpfxsh Ek Das Amzolr - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, Module milling cutter Module 8 Klododklt Nopfx Amzor 20 degrees Length 1800 mm Diameter 120 mm inside 40 mm

Condition: excellent (used), Welding rotary table Focker Strähler 8 tons 8000 Kg load capacity with hand and foot remote control Speed and inclination infinitely variable 0,02 U/min to 1,1 U/min diameter 1500mm Klodof Ezdnjpfx Amzsr height tilted to the middle 1170mm height horizontal 1400mm length 2400mm width 1500mm condition optically and technically perfect, runs very quietly