Shredder

ZENO ZTLL 800x1000

Condition: used, Year of construction: 1991, VECOPLAN VAZ 120/105-U Waste Shredder / Crusher For sale: VECOPLAN VAZ 120/105-U waste shredder, in almost new condition. The machine has been 2025 year completely overhauled and technically upgraded and is fully operational and ready for use. The shredder is equipped with a PLC control system, enabling fault monitoring and advanced control functions. A power meter is installed for efficient energy monitoring. The system operates fully automatically. When the machine is empty, it stops after a preset time, eliminating the need for manual shutdown. Once the crushing process is completed, the machine shuts down automatically. If the shaft becomes difficult to rotate, the press stops applying pressure while the rotor continues rotating. As soon as the shaft can rotate freely again, the pressing process automatically resumes without going to start pozition. This significantly improves operating efficiency and reduces unnecessary wear on machine components. If the load does not decrease, the press retracts. Should the load still remain high, the crusher shuts down automatically and indicates an overload condition, protecting the machine from damage and further wear. Technical Specifications: • Machine type: VECOPLAN VAZ 120/105-U Waste Shredder • Application: shredding particleboard and solid wood, plastic, paper and similar waste • Drive power: 18.5 kW • Introduction: up to 1000 kg/h for particleboard waste • Screen diameter: 25 mm • Rotor: Ø 235 mm (circle), width 1070 mm, 120 rpm • Motor: Rated power: 18.5 kW Rated current: 36.5 A Speed: 1455 rpm Voltage: 400 V / 50 Hz Iedpfx Abjt Dh T Dsrshu Protection class: IP54, Type B3 • Drive system: V-belt drive with hydrodynamic turbo coupling (soft start, overload protection) • Hydraulic unit: Drive power: 1.0 / 1.4 kW Maximum pressure: up to 180 bar • Feed opening: 1200 × 1050 mm • Extraction nozzle: minimum air velocity 28 m/s Dimensions & Weight: • Weight: approx. 2300 kg Condition: fully operational after maintenance.

Condition: used, Year of construction: 1988, functionality: unexamined, available Berstorff Mill 400 x 900mm more details in attached description! Ihedpfx Ajr A Dfyobreu

Year of construction: 2025, condition: new, - soft start / stop - pre-stretch tension - additional engine - height 2.1 m - ramp / platform - platform diameter 1.65 m - film stretch up to 350% - Strong chain drive - man-hour and pallet counter - regulation of wrapping speed 3-12 rpm - the ability to adapt the device according to the customer's needs - 230V power supply - Automatic return to the starting position ADDITIONAL FEATURES: - Very easy to use - Operating hours counter - Pallet counter - Cycle pause function - Stretching on the head modes and not on the palette - Adjustable wrapping speeds Pallet wrappers are designed for machine wrapping of goods stored on pallets with stretch foil. They are especially recommended where very high efficiency and low labor and financial costs in the packaging process are required, i.e. in distribution centers, warehouses, logistics centers, production plants, as well as in smaller companies. Iedpfx Abjmuzutershu – increasing the efficiency of the packaging process – the ability to set the required parameters by machine and the high rotational speed of the wrapping plate makes machine wrapping much shorter than manual wrapping, and the employee during foiling can be involved in other activities, e.g. preparing or delivering another pallet, – repeatability of packaging – wrapping with a wrapper allows you to maintain an identical method of packaging for a specific type of cargo, repeatability of a once developed and appropriate method of packaging allows for safe storage and transport of goods, – load stability – the wrapper, thanks to the adjustment, allows you to adjust the wrapping method even to very diverse loads in a reliable way and guarantees the stability of the load on the pallet, which guarantees avoiding possible damage to the load.

Condition: new, Technical data: Ihodpfx Aemiiktjbrsu Minimum cutting width: 300 mm Max cutting width: 400mm Max cutting height with standard blade guide: 350 mm Max cutting height with special blade guide: 410 mm Belt length: 2720 mm Motor power: 1.1 kW Advantages: -They are safe and easy to use machines, manually operated by the operator. -Designed and built to cut materials such as: solid wood, panels, plywood boards, also laminated or edged -They are suitable for both small jobs and mass production -The main advantage that distinguishes MD Dario band saws from conventional models is the articulated arm with a special system of joints that allow the machine to rotate freely in all directions and angles, thanks to which the user can make precise cuts - The saws have 3 rubber-coated flywheels, thanks to which it is possible to perfectly guide the saw and use band blades of different sizes depending on the type of cut Work table and tilt included.

Condition: new, Cutting range: round 0°: 170 mm square 0°: 150 x 150 mm flat 0°: 150 x 190 mm round 45°: 125 mm square 45°: 95 x 120 mm working height : 870 mm cutting speeds : 40 / 80 m/min saw band: 2080 x 20 x 0,9 mm coolant pump: 100 W saw motor: 0,75 kW connection: 400 V dimensions L x W x H, approx.: 1340 x 810 x 1320 mm Weight, approx.: 146 kg Features: - Saw bow can be tilted up to 45°. - With 2 saw blade speeds for optimum adaptation to the workpiece - Ideal for cutting tubes, profile material as well as solid material made of VA, iron, etc. - Generously dimensioned saw arm for low-vibration work - Lowering of the saw arm via hydraulic lowering cylinder - Low noise level due to stable design - Switch-off after end of cut by micro limit switch - Quick-action vice for simple and fast workpiece clamping - Precise, adjustable saw blade guide for optimum cutting results - Coolant system with pump - Incl. base frame - CE/IEC, German documentation and German service Ihedpfoilk H Tex Abrou Scope of delivery: - BiMetal saw band 2080 x 20 x 0.9 mm, 6/10 ZpZ - Band tension adjustable via manometer - quick clamping vice - material stop - Coolant device with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic limit stop after end of cut - underframe

Condition: ready for operation (used), For sale is a complete log yard with long log feed, Nicholson A6/35'' debarker and Baljer Zembrod OBX V-24 bridge crane with up to 200 meters of rail. Iodewxndnjpfx Abrjhu

Condition: used, machine/vehicle number: 11666, Rotor diameter: 280 mm Rotor width: 300 mm Ihedpoghgq Nsfx Abrsu 3 blade rotors 2 rows of stator blades Inlet cross-section approx. 300 x 280 mm Drive motor 11 kW With noise protection box, noise protection hopper, and exhaust fan

Condition: excellent (used), Several 150 m³ steel storage tanks (extinguishing water tanks) located underground Volume: 150,000 litres diameter: approx. 3.000 mm length: approx. 22.500 mm Weight: approx. 28,000 kg The tanks are converted to underground extinguishing water tanks according to DIN 14230: The tank has an extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in the design form B without gauge connection. Furthermore, the tank has a venting flange connection in NW/DN 100 with cap in a total length of approx. 1,300 mm suitable for 800 mm ground cover and 500 mm above ground. - The tank is emptied, cleaned and has been provided with a bitumen exterior coating by us at the factory. - if required, we can provide the tank with a full bitumen-based interior coating (against corrosion) or epoxy resin interior coating A cost-effective delivery with our own truck is possible. Simply inform us of the delivery location, you will then immediately receive the exact freight costs. An inspection is possible at any time by prior appointment. Ihedpfx Aefnh Tgebreu If you need any further information, just give us a call or send us an e-mail to b.barth (a) barth-tank. de

Condition: used, functionality: fully functional, tank capacity: 30,200 l, total height: 6,000 mm, inner diameter: 2,800 mm, overall weight: 1,400 kg, TECHNICAL SPECIFICATIONS - Flat bottom tank with 2% slope - Brand: ALFA LAVAL - Total capacity: 30,200 litres - Material: 316 L stainless steel - Interior finish: Cold rolled - Exterior finish: Cold rolled - Temperature controlled ROOF - Conical - 1 off-centre chimney at the front Ø 200 mm - 2 stainless steel flags - 1 thermometer - 6 lifting rings RING - 1 oval door 310×420 mm - 1 partial drain valve DN 65 Isdpjv I A Nlsfx Abrohu - 1 connection for level sensor BOTTOM - 2% sloped tray with drain - 1 total drain valve with cap APPENDICES - Tanks compatible and suitable for storing liquid fertiliser - 6-month warranty - Compliant with CE standards

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 288, Debarker with infeed conveyor, for max log size either up to 460 mm or 600 mm, speed up 100 m/min, reducer rotor and debarking rotor, debarking rotor with opening 620 mm is NEW PRODUCED with warranty time, incl. reducer rotor change device. On below photos as it stands today, dismantled. Delivery time 3 month from order Ihedpfxjtk N Dkj Abrsu