Used Bale presses for sale (214)

Condition: excellent (used), Year of construction: 2014, operating hours: 37,656 h, Functionality: fully functional, pressing force: 85 t, bale weight: 650 kg, filling opening width: 1,500 mm, filling opening length: 1,100 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 25,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2024, volume flow: 410 m³/h, transport width: 2,400 mm, transport length: 9,300 mm, Hello, We are offering you a used baler from the manufacturer Presona AB, type LP 85 VH1, subject to availability. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours, as of March 2025 Main press force: 85 t Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Coln Sx Ejv T I Evj Dorb Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying system: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Note: The machine was used for compaction at a recycling plant. Used for the production of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have been replaced over the past three years. The machine has been regularly serviced. We would be pleased if this press is of interest to you. Your service team at Mertens & Frowein GmbH

Year of construction: 2003, operating hours: 43,000 h, Condition: repair required (used), machine/vehicle number: HBC 140 2x75kW 2003 (W230-005), Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2003 Hardox bottom floor plate only Plastic valve Anti-rat cabling Hours 43.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. Crjln Sx Eskcgyne Deb If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: reconditioned (used), Year of construction: 1992, Functionality: fully functional, machine/vehicle number: 91-01611001, pressing force: 16 t, bale weight: 80 kg, filling opening width: 545 mm, filling opening length: 680 mm, bale length: 800 mm, total width: 860 mm, total height: 1,680 mm, total length: 3,530 mm, bale height: 550 mm, bale width: 600 mm, overall weight: 1,200 kg, power: 3 kW (4.08 HP), A horizontal baler that can be filled via a chute and can be operated with a light barrier. The bales are tied manually using two strapping bands. Celn Sx Esv T R Uto Djrb

Condition: good (used), Baler HSM V-Press 504 waste paper press Machine in perfect condition, like new. Machine purchased from a warehouse, unused. Description: -HSM TCS (TorsionControlSystem) for controlling the inclination of the press plate Modern microprocessor control with membrane keyboard and graphic text display Suitable for both cardboard and foil Automatic start of the pressing process after closing the door Massive pressure plate and extremely stable pressure plate guide To fill the press, the upper half of the door opens to the right Door lock with knee lever for quick and safe door opening Manual bale strapping with polyester tape Pressure force: 40 kN Specific pressure force: 11.2 N/cm2 Drive power: 1.1 kW Voltage frequency: 230V / 50Hz Idle cycle time: 27 sec. Press capacity at idle speed (theor.): 3.75 m3/h Cjln Sx Ejv H T Rwj Derb Fill level: 661 mm Width x height of filling opening: 700 x 470 mm Bale length x bale width x bale height: 700 x 500 x 600 mm Bale weight: 60 kg Width x depth x height: 1020 x 812 x 1922 mm Weight: 290 kg Related product line: V-Press Consumable type: strapping tape

Condition: used, Year of construction: 1997, Technical specifications of horizontal automatic Press Crjlnev Svkkj Sx E Deb Model Konti 275 D Manufacturer: PAAL, Germany Press force: 75t Channel cross-section 75x110 cm. Feed opening 102x155 cm. Filling volume approx. 2.0 m3 Binding vertically 5 wires Drive power 45 kW Material throughput • Density 35 kg/m3 9.5 tonnes/hour. • Density 60 kg/m3 16.5 tonnes/hour. • Density 100 kg/m3 26 tonnes/hour. Bale weight from 500 to 750 kg. Adjustable bale length Bale size (WxH) 75 x 1100 mm Press weight 25 tonnes Press dimensions see brochure Year of manufacture 1997. Operating hours, approx. 40,000 hours

Condition: used, Year of construction: 2011, pressing force: 3 t, power: 0.001 kW (0.00 HP), Baler / press for waste paper, film and cardboard BRAMIDAN B3 - used. The BRAMIDAN B3 baler is a compact machine for compacting and compacting cardboard and foil. The baler has a high press ratio and effectively reduces the volume of waste. It is ideal for use in warehouses, wholesalers and logistics companies. The cardboard baler is equipped with a swing door, maximum bale size 77x50x60 cm. Pressing time with return stroke 24 s. The BRAMIDAN B3 cardboard compactor is a professional device that effectively reduces waste. It enables waste to be baled into ready-to-collect bales, which are double-bound using strapping. The bales are compact and easy to handle. The baler is ideal for wholesalers, warehouses, grocery shops and clothing shops. Technical specifications Model : BRAMIDAN 3 Width : 82 cm Depth : 72 cm Csln Sotvmbtsx E Dorb Height : 198 cm Weight : 310 kg Power : 1.1 kW Voltage : 230 V Press force : 3 t Net price : 1799.00 euro each year of manufacture 2010 (Commodity code : MTP006934) 1929.00 euro each year of manufacture 2011 (Commodity code : MTP005286) 1999.00 euro each year of manufacture 2012 (Commodity code : MTP006932) 2049,00 euros a piece year of production 2014 (Commodity code : MTP006525) 2169,00 euros a piece year of production 2015 (Commodity code : MTP005287) 2289,00 euros a piece year of production 2017 (Commodity code : MTP005288) 2329,00 euros a piece year of production 2018 (Commodity code : MTP006933) 2399,00 euros a piece year of production 2020 (Commodity code : MTP006526) * Shipping throughout Europe possible. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, pressing force: 50 t, Perfectly functioning, fully equipped, cleaned, new oil. Crsln Sx Esv Udpms Djb

Year of construction: 2008, operating hours: 40,000 h, Condition: good (used), machine/vehicle number: HBC 140 2x75kW 2008 (00191), Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. Cjlnjkcgf Hj Sx E Derb General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: excellent (used), Baler Hsm V-Press 825 plus Pressing force: 250 kN Drive power: 4 kW Cycle time: 39 s Loading height: 958 mm Loading opening width x height: 1195 x 530 mm Bale length x width x height: 1200 x 780 x 700 mm Bale length x width x height: 1200 x 780 x 700 mm Machine width x depth x height: 1700 x 1046 x 2370 mm Machine weight: 1063 kg Type of consumables: strapping tape Cjlnev Akcis Sx E Dorb Compressed material: foil, mixed paper, cardboard, die-cutter waste, clothing Years 2012-2014 price 6000eur Baler Hsm V- Pres 825 pro 2019-2021 costs 9,000eur

Condition: excellent (used), Year of construction: 2006, Balemaster Year: 2006 Type: CMG 268 Colsrdwlkon Sx E Dsrb Waste compactor

Condition: good (used), Year of construction: 2008, Garbage compactor, garbage compactor, press container, garbage container, self-compacting container, mobile waste compactor, paper compactor, paper container, baler, paper press, waste compactor, garbage press, vertical baler -Manufacturer: Papenbrock, vertical baler K 800 with bale wagon -Interior: 830x600xH1180 mm Crslnoud Dvgs Sx E Deb -Pressing process: Press piston -Knotting: with strapping band -Transport dimensions: 1090/760/H2380 mm -Weight: 470 kg

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, pressing force: 30 t, Baler paper baler Bramidan Bramin B30 W, year of manufacture 2021, weight 1640 kg, for cardboard/plastic film/paper, motor 4 kw 400 volt, pressing force 30 tons, cycle time 43 sec, dimensions HxWxD 3350x2080x1270 mm, feed opening WxH 1525x560 mm, transport height 2350 mm, machine is equipped with Bra-In App, Ser.No.437524, very good condition Crjln Sxsq Rt Dds E Djb

Condition: reconditioned (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 610.01.022, pressing force: 59 t, bale weight: 350 kg, filling opening width: 1,190 mm, filling opening length: 600 mm, bale length: 1,180 mm, total width: 1,059 mm, total height: 2,871 mm, total length: 1,838 mm, type of input current: three-phase, bale height: 800 mm, bale width: 700 mm, input voltage: 400 V, overall weight: 2,300 kg, warranty duration: 6 months, input current: 16 A, transport height: 2,050 mm, power: 4 kW (5.44 HP), year of last overhaul: 2024, transport width: 1,059 mm, transport length: 1,838 mm, type of motor: three-phase motor, nominal current: 16 A, protection type (IP code): IP54, input frequency: 50 Hz, cylinder stroke: 890 mm, Equipment: documentation/manual, Brand: Strautmann Umwelttechnik GmbH The stated price is exclusive of VAT, ex works, and excluding packaging. The press has been cleaned, function-tested, repaired, and equipped with a new control system in accordance with EN16500. Croln Sxev Rzwms E Dsb All spare parts used are genuine Strautmann parts. Technical Details: Manufacturer: Strautmann Umwelttechnik Type: PP 1207 Bale Size (L x W x H): 1180 x 700 x 800 mm External Dimensions (L x W x H): 1838 x 1059 x 2871 mm Transport Height: 2050 mm Filling Opening: 1190 x 600 mm Baling Pressure: 59 t / 580 kN Throughput: 1 - 2 bales / hour Number of Belt Channels: 4 Baler Weight: 2,300 kg Power Supply: 400 V / 50 Hz Power Consumption: 4 kW Installation Location: Indoors / Outdoors, Covered Includes Bale Belt Starter Set, 19 mm Serial Number: 610.01.022 Year of Manufacture: 2004

Year of construction: 2008, Condition: good (used), Horizontal baling press Crolsg Ibt Nsn Sx E Dsb Build in 2008 Bale size 800x1000x1400 Loading height 1250mm

Condition: like new (used), Year of construction: 2018, Functionality: fully functional, pressing force: 10 t, Fully equipped and ready to use. New oil. Crelnov Tfhnj Sx E Deb

Condition: used, Year of construction: 1994, pressing force: 40 t, power: 22 kW (29.91 HP), We are selling the BAUER 300 baler. Cjln Sx Eov S Uwis Djrb Technical specifications: Installation of the secondary raw material baler Manufacturer: BAUER Model: 300 Year of production: 1994 Power: 22 kW Pressing force: 40-50 t The dimensions of the baler are 10,300 x 2,000 x 3,000 mm Tipping weight: ~ 400 kg PRICE AVAILABLE ON REQUEST!

Condition: like new (used), Year of construction: 2020, operating hours: 1 h, Functionality: fully functional, Manufacturer: Bramidan Type: Vertical raw material press B20 Year of construction: 2018 Condition: Very good Available from: Immediately Location: 48282 Emsdetten Price: 8.800 € net Technical details: Pressing force: 20 t Bale size (WxDxH): 1200 x 800 x 800 mm Bale weight: Cardboard: 200-250 kg Plastic film: 250-300 kg Filling opening (WxH): 1200 x 480 mm Dimensions (WxDxH): 1775 x 1030 x 2790 mm Transport height: 2.58 m Colnjvftuyo Sx E Djrb Weight: 1,250 kg Lift: 750 mm Number of tie-downs: 4 Type of strapping: belt Power supply: 3x400V, 50Hz, 16A Motor power: 4.0 kW Cycle time: 36/21 seconds (average) Noise level: 62-64 dB Special features: Easy handling: -Automatic bale ejection -Easy bale strapping High efficiency: -Short cycle times thanks to high-speed technology -Stackable bales - up to 900 kg per pallet (can be stacked 2 or 3 high) Suitable for: Dry and soft recyclable materials such as cardboard, paper, cardboard packaging (PPK) and film If you are interested or require further information, please contact me.

Condition: refurbished (used), Year of construction: 2010, operating hours: 26,174 h, machine/vehicle number: 01527 Veolia Gent, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler. Baler will be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This inclused 2 year guarrantee. Contact us for more information or a quotation. Technical data baler Typ HBC 120 K Year of construction 2011 Press power main press 120 tons Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm Bale size 1,100 x 720 mm Driving motor 90 kW Double channel pressure cilinder for increased bale weights Baler will be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This inclused 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Celn Sx Esq D Az Re Derb Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: used, Year of construction: 2020, Functionality: fully functional, EP 120 V Equipment: - Torsion-resistant press box with replaceable floor wear plates - Press piston in heavy design with height-adjustable stable rollers (thus adjustable knife gap) - Pre-installed inclined knife, thus higher cutting forces and a shock-free cutting mechanism - Knife fastening using an innovative screw system and thus easy knife replacement possible - Counter knife system with large cutting clearance angle and optimal cutting geometry - Drive of the needle carriage unit via a robust chain and side guide mounted on rollers (everything adjustable) - Two individually mounted retaining teeth on each press frame side (material expansion in the press shaft is thus avoided) - Extremely stable channel adjustment with oversized adjustment cylinder - Menu-controlled material selection with type and bale length preselection - Control cabinet with manual controls and touch panel with simple operating instructions - Demand switching of the main pumps for energy-efficient Pressing operation - All required safety standards and safety locks Technical data: - Pressing force of 120 tons - Length of the channel baler: approx. 12,700 mm - Height of the channel baler: approx. 3,600/4,300 mm - Weight of the channel baler: 32 t - Filling opening: 1,000 mm x 2,000 mm - Channel cross-section: 750 mm x 1,100 mm - Bale weight: 600 - 900 KG - Bale format: H=750 mm x W=1,100 mm - Pressing force of the press ram: 120 t - Pressing power: Main pump drive: 2 x 55 kW // Oil tank volume: 2,720 liters - Noise reduction hydraulic unit: Sound pressure level - Automatic 5-fold vertical bale strapping for wire thicknesses from 2.8 mm to 3.8mm - Piston slide principle: needle slot cover - Wear-resistant Hardox base plate in screwed design - Horizontal cylinder bracket: This counteracts misalignments of the press plate due to wear - Articulated bearing on the cylinder piston - Rails of the press plate Hardox screwable and replaceable Celn Sjv Imldex E Djrb - Adjustable rollers of the press plate - Path-distance measuring system integrated in the cylinder, optimal position detection of the press ram - Hydraulic oil

Condition: used, pressure 4,0 t box opening 600 x 500 mm box depth 550 mm total power requirement 1,5 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 0,77 x 0,95 x 1,45 m Press cycle 14 sec. Cjlnov Irino Sx E Djrb Bale weight box approx. 25 kg Bale weight of film approx. 50 kg

Condition: used, Year of construction: 2003, Technical details: pressure: 40 t box opening: 1200 x 730 mm material: Pappe,Plaste - cardboard bottles voltage: 400 / 50 V / Hz total power requirement: 16,4 kW transport measurements machine: 6,5 x 6,2 x 2,7 m Fully automatic hydraulic CHANNEL BALL PRESS for recycling with conveyor unit/conveyor belt LxW: 4500x1000mm motor driven with automatic binding unit 3-fold bale count display/counter bale chamber LxWxH: 1800x800x800mm with 1,2m³ volume bale size LxWxH: 800x800x300-1600mm Filling opening LxW: 1200x730mm: Filling height 1200mm Hopper size LxWxH: 1200x1200x1400mm; filling height 2500mm Csln Sx Eeu Nw Eze Dorb *

Condition: excellent (used), Year of construction: 2018, Baler, Bramidan B20 - second-hand - : Price ex location: 7.750.-€ (net) Manufacturer: Bramidan Type: Vertical raw material balers B20 Year of construction: 2018 Bale weight Cardboard (kg) 200-250 Plastic film (kg) 250-300 Pressing force 20 t Bale size WxDxH (mm) 1200 x 800 x 800 Filling opening WxH (mm) 1200 x 480 Power supply 3x400V 50Hz 16A Motor (kW) 4.0 Cycle time average (s) 36 / 21 Dimensions WxDxH (mm) 1775 x 1030 x 2790 Transport height: 2.58m Weight (kg) 1250 Stroke (mm) 750 Number of tie-downs 4 Creln Sxsrl I Ivs E Djb Type of strapping Strap Finished bale light Yes Bale ejection Automatic The classic among raw material balers The B20 is versatile and is used everywhere. The recyclable materials must be "dry & soft". Particularly suitable for raw materials such as cardboard, paper, cardboard packaging (PPK) and film. Stackable bales, up to 900 kg per pallet The bales are stacked 2 or 3 high on one; enormous space saving. Simple bale strapping Automatic bale ejection Short cycle time thanks to high speed Strap rollers mounted on the front allow installation directly on the wall Pallet-sized bales that can be stored outdoors under cover 3xx230x-440 4kW Amps: 25/16 dB 62-64 Condition: good - very good Available: immediately Location: 09116 Chemnitz

Condition: good (used), Welger Type: RC 660 Roller compactor with Brück suction Compact and fully automatic Used exclusively for producing pressed bales from low-density packaging materials. Application variants Press materials Paper edge trimming (strips and endless) Paper and film bags PP film edge trimming Film strips Clothing protection film (PP/PE films) PP/PE fiber material Insulating and nonwovens Foam mesh Packaging foam Tetrapak Length 2100mm, width 940mm, height 1755mm Dimensions of filling shaft 330 mm x 600 mm Crolnedtxbij Sx E Dsb Bale format max. 400 mm x 600 mm Bale weight 20 - 30 kg depending on the material being pressed Press density 250 - 400 kg/m³ depending on the material being pressed Throughput daily output 30 bales / day Feed speed 0.36 m/s RC 660 3X 400V 50Hz 16A 2.2 kW 5.0A 700 kg Brück extraction Series: KFA Size: 60-30-3000 Air output: 6,000 m³/h Motor output: 0.3 kW Filter area: 30 m² Negative pressure: 3,100 Pa Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, pressing force: 15 t, bale weight: 220 kg, bale height: 700 mm, bale width: 700 mm, input voltage: 400 V, power: 4 kW (5.44 HP), net weight: 2,700 kg, Manufacturer: Borg Baling Company Type: S-15KK Year of production: 2002 3x400V, 4kW, 14.5A Cslnjh Dy Rfe Sx E Dorb Compression force: 15t Net weight: 2.7 t Bale max. sizes 700x700x1000 mm weight of a bale: ca 120 – 220kg Wide Range of Used Machinery, Industrial Equipment

Condition: good (used), Year of construction: 1985, Functionality: fully functional, pressing force: 50 t, bale weight: 500 kg, bale length: 1,000 mm, bale height: 750,750,750 mm, bale width: 750 mm, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), net weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Coln Sxoic Rl Do E Derb Bale weight: approx. 500 kg Machine weight: approx. 8t The hydraulic unit is functional, the drive motor is in the removed state.