Used Beverage production for sale (935)

Condition: used, Year of construction: 2013, Overview This Rühle dicer with infeed belt, type: SR3, was built 2013 in Germany. The fully automatic high-performance machine can process up to 3,500 kg/h. The material can be cut into cubes, strips or rasp in various sizes. In the temperature range from -5°C to +80°C the machine cuts almost any food. Equipped with an infeed-coveyor - especially for round logs up to diameter 120mm like cooked ham. Perfect for Pizza-toppings. Technical Details 400 V, 3 Ph, 50 Hz, 32 A, 17 kW chamber: 120 mm x 120 mm total dimensions: 1300 mm x 2200 mm x 2820 mm including different grid-sets for cubes and stripes infeed elevating belt with dividers plastic mesh belt, belt width: 500 mm divider height: 100 mm distance between dividers: 290 mm elevating height: 2520 mm total dimensions: 3300 mm x 1200 mm x 2620 mm Scope of delivery automatic high-performance dicer | RÜHLE | SR3 | 2013 Deb Hsuca Agelubasut

Condition: used, Year of construction: 2017, Overview  This crater was built in 2017 from German manufacturer Krones. The machine is in a very good condition, still installed and can be viewed in person at any time.    Technical Details    Capacity  28,800 bottles per hour   1,200 crates per hour   Recently processed parameters  Bottle dimensions  500ml   Outer diameter: 65,50mm   Total height: 206,30mm  Crates  Formation 6x4   Length crate: 400mm   Width crate: 300mm   Height: 255mm  Box inlet direction: transverse  Electrcial connection: 400/ 230V, 50Hz, 15 A  Dob Hlust Rbznsbaeut

Condition: used, Year of construction: 2022, Overview  The filling machine Flowmeters 8 was built in 2022 by Polish manufacturer Perunpack. The machine was only tested, is still under power and can be viewed in person at any time.  Technical Details  Capacity: 800-1000 bottles per hour for the 5 l format Machine can fill containers from 150 ml to 6000 ml. Number of filling stations: 8  Diameter of fillers: 16 mm Machine can fill thick products and typical water  Measurement system is based on Keyence flow meters, special flow meters for dosing machines Machine is equipped with a pump with an elastic rotor that doses the medium into a pressure tank and then onto the fillers. Entire machine is made of 304 stainless steel Siemens control system. Filling from the bottom of the container. Lowering and raising the boom with fillers using a servomotor    Duebsrziuyj Hlubaot

Condition: used, Year of construction: 2008, Overview This wrap-around cardboard packer was built in 2008 by Italian manufacturer SMI. The machine is still installed and can be viewed in person. Techn. Details Capacity: up to 45 packs per minute Recently packed: 3x4 cardboard, 0,75L glass bottles Other formats possible Working hours: 1,752 POSYC 3000 Touch panel Deb Hluormfpvsbasut

Condition: used, Year of construction: 2018, Overview These 2 cooking-kettles  were built in 2018 by company MKN in Germany. One pressure cooking-kettle and one standard cooking-kettle. They can be used for all kind of batch-cooking  - applications like cooking, blanchering, braising etc. Both machines are on stock. Technical details 1. Pressure cooking braisiére Elektro 2/1 GN External dimensions: 1100 x 850 mm x 700 mm Internal dimensions: 700 x 540 x 300 mm Nominal capacity: 111 litres Usable capacity: 96 litres Electrical connection: 14.4 kW 3 NPE 2. Electric Braisiere Magnum External dimensions: 1000 x 850 x 700 mm Internal dimensions: 700 x 540 x 250 mm Nominal capacity: 92 litres Electrical connection: 14.4 kW 3 NPE Scope of delivery Pressure cooking braisiére | MKN | 2018 Electrical braisiére Magnum | MKN | 2018   Duebetv S I De Hlubajt

Condition: used, Year of construction: 2014, Overview This MONO-BLOCK bottle filling line was constructed by KOHEM (now CIMEC) in 2014. It operates perfectly and has been well-maintained. Currently, it is dismanteld and stored. The bottle-formats are 33 cl long neck, 75 cl ”champagne-style” and 375 cl champagne style. The capacity is 1000-1300 bph when doing 33 cl long necks. Equipped with pneumatic offloading solution. Machine list Labeling Machine (2014) Manufacturer: CDA Model: R1000 Filler Capper (2014) Manufacturer: Kohem (now Cimec) Model: RIS 8/1 - DPS Deb Hlubett Um Hjaeut

Condition: used, Year of construction: 2016, Overview This complete filling line for glass bottles is part of a brewery and used for filling beer in 330 ml glass bottles with crown caps. It consists of an automatic glass depalletizer, self-adhesive labeller, filling triblock and a carton packer. The entire equipment was installed in 2017 by Italian manufacturer Framax. All the equipment is still installed and can be viewed in person during production. Technical details  Production capacity: 2,400 bph (at 0,33l) Formats recently used: 0,33l Bottle diameter: 60mm, height is adjustable 26mm crown cap Packaging: 6x4 carton box Scope of delivery Automatic depalletizer | Framax | DEPAL SS-3000 | 2017 Automatic sheet removal Photocells for depalletizer Selfadhesive labeller | Framax | RLA-H06-S3-L3-D480 | 2016 3 stations for 3 labels (front, back, neck) Date/ batch printer Isobaric filler | Framax | Modulblock RFCI-16/16/1-DPS/C | 2016 Nominal capacity: 3.000 bph 16 Rinsing positions 16 Filling positions Single head capping unit for crown caps with cap feeding unit Double air pre-evacuation with CO2 Water spray device before capping, for reducing the amount of residual oxygen Automatic carton packer | Framax | CP-0700-1T | 2017 Box erecting and inserting machine With taping machine Accessories such as conveyors, cooling, pumps Deb Hett Um Relubajut

Condition: used, Year of construction: 2012, Overview  The complete filling line for big size PET bottles is located at a mineral water plant and was used for filling still water. The line has been regularly serviced and is in very good condition. All machines are from 2012 and have only about 20,000 operating hours. Output: 4,200 bph on 5,0l Formats: 2.5l and 5,0l Closure: 38mm plastic screw cap Label: hot glue List of machines Blow moulder | Sidel | SBO 3 Compact | 2012  Preform kipper || 2012  Preform hopper and feeder || 2012  Air conveyors | NTS || 2012  Rinser Filler Capper | Gallardo | 12-18-4 | 2012  Handle applicator | And & Or || 2012  Labeller | Makro | MHK23P UHM1L1 CE | 2012  Line distributor | Emebe || 2012  Shrink packer | KHS | Innopack Kisters SP | 2012  Handle applicator | Project AE | Progrip 550 | 2012  Dob Hjtr R Tkolubaout

Condition: used, Year of construction: 2010, Overview This bowl cutter made by the German manufacturer MBK Ellich was built in 2010. The machine is maintained and will be equipped with a new front cover. With touch panel for temperature check and speed control. Technical Details Volume: 40 liter Knife shaft 50–4000 min-1 Operating voltage 400V/ 50Hz Rated power 18,5 kW Scope of delivery Bowl cutter | MBK Ellrich | SC 40/CTL | 2010   Dujb Hlubsugb Tuoaot

Condition: used, Year of construction: 2003, Overview This grinder, type: KOLBE AWE 130 was built in 2003 in Germany. The machine is in good condition. Technical Details 130mm hole plate diameter 1 speed working worm 1 speed feeding worm 130 liters hopper capacity Width: 1250 mm Depth: 1000 mm Height: 1550 mm Installed power: 11,0 kW, 23 A Voltage: 380 V, 50 Hz Scope of delivery grinder | KOLBE | AWE 130 | 2003 Dsb Heugb Tzelubajut

Condition: used, Year of construction: 2013, Overview This swing loader, type: ITEC 27200 was built in 2013 in Germany. Perfect for BigBox -tipping. In very good condition. Technical Details Length: 2350 mm Width: 2000 mm Height H1: 1900 mm Height H2: 3300 mm Tip-height: 1200 mm Transfer-height: 1040 mm Box measurements: 1200 * 1000 * 800 mm Max. box-weight: 1000 kg Weight: 650 kg Scope of delivery Swing loader for BigBOX | ITEC | 27200 | 2013 Duobsugpxrj Hlubast

Condition: used, Year of construction: 2020, Overview  This filling line for tetra packs was installed in 2021 and consists of an A3 Flex filler, Helix accumulator, Domino printer, capper, and cardboard packer. The line currently fills water into carton packs. The machines can be viewed in person at any time.  Technical details  Output: 9,000 containers/ hour  Cap: Helicap 23   Several products can be filled such as dairy products, juices, flavored water    Last filled product: Unflavored drinking water   Packaging: 2x5 containers per cardboard  Layout and technical documentation available upon request   Machine list  Filler | Tetra Pak | A3/Flex TBA | 2020  Printer | Domino | A520i | 2020  Accumulator | Tetra Pak | Helix 30 | 2020  Cap applicator | Tetra Pak | CAP30Flex | 2020  Cardboard packer | Tetra Pak | CBP32 | 2020 Dueb Hluboupppkeaet

Condition: used, Year of construction: 2009, Overview This continously crate washer, type: Kitzinger Contino 250 was built in 2009 in Germany. The crate wahser ensures that all the dirt on the crate, such as proteins, blood residues, fasts and dried-on dirt, is removed in a single wash cycle. Technical Details Capacity: 160 crates/ hour Total electricity connection: 24 kW Heating Main Washing: 10 kW heating rinsing zone clear water: 10 kW power for pump and transport drive: 4 kW Water tank: 360 litres Connection fresh water: 1/2 inch Drain: DN 40 mm belt width: 420 mm, clearance: 420 mm x 350 mm, total dimensions: 4000 mm x 1300 mm x 1900 mm Scope of delivery continously crate washer | Kitzinger | Contino 250 | 2009 Dueb Heuimbielubajt

Condition: used, Year of construction: 2021, Overview This meat grinder for fresh and frozen meat, type: Laska WW 200-H was built in 2021 in Austria. It is a demo-machine with less working hours (180 hours). The machine is equipped with column loader for 200l trolleys. Throat height: 750 mm Hopper capacity: 385 liters, geometry optimized for complete emptying, screw with high rotations for regular feeding of large pieces – hinged flap for removing the screw, Double sealing system on the drive shaft for better hygiene, Extendable step with protection for better access to the loading hopper, Automatic regulation of rotational speed for the feeding screw and working screw depending on the torque. Automatic stop of the grinding screw in case of product absence, protecting the machine and preventing premature wear of the cutting unit. Electric cabinet integrated with the machine with internal ventilation reducing the risk of condensation. Operator panel with control buttons (start/stop, emergency stop) for easy operation. Throat cover with safety sensor and lock. Technical Details Throat diameter: 200 mm Power supply voltage: 400 V Electric power of the working screw drive motor: 43 kW Capacity: Fresh meat +4 degrees Celsius: 6000 kg/h (final sieve 3 mm); 9500 kg/h (final sieve 5 mm); 11000 kg/h (final sieve 8 mm); Frozen meat -18 degrees Celsius (pre-shredded blocks): 2500 kg/h (final sieve 3 mm); 3100 kg/h (final sieve 5 mm); 3500 kg/h (final sieve 8 mm) Dimensions (length x width x height): 2200 x 2000 x 2400 mm Weight: approx. 2000 kg IP56 protection class (protection against water jets and dust) Scope of delivery Grinder | LASKA | WW 200-H | 2021 Deb Hot H T Apelubaeut

Condition: used, Year of construction: 2010, Overview   This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and must be replaced due to an increase in performance.   Technical details   Nominal output: 33,000 bph   Control range: 13,200 - 36,300 bph   Chain pitch: 169 mm   Cell pitch: 110 mm   Bottle cells per row: 30 pieces   Total bottle cells: 7,860 pieces   Bottle cells, loaded: 7,680 pieces   Consumption  Compressed air: 1m³   Steam (operation): 489 kg/ h   Steam (heating): 4,430 kg/ h   Electrical power: 48.4 kW   Water: 7.35 m³/ h   Bath volume   Pre-soak: 2,263 l   Pre-caustic: 7,240 l   Caustic 1: 31,755 l   Caustic 2: 350 l   Hot water 1: 350 l  Hot water 2: 350 l   Cold water: 350 l  Dujb Hot Ul Exolubaet

Condition: used, Year of construction: 1997, Overview   The filling line for cups was built by HAMBA in 1997, is still in operation until the end of 2024 and can be inspected at any time.   Technical data Output: 20 - 40 cycles/min   Products that can be packed:   Liquid yoghurt milk, 0.3 to 4% fat (20-45°C)   Stirred yoghurt with fruit, max. edge length of fruit pieces 15mm, 0.3 to 4% fat (3-10°C)  Cream, 25 to 35% fat (3-42°C)  Salad dressings with salt, herbs and vinegar  Pudding, sweet (2-70°C)  Cup formats:  Cup diameter: 75 mm   Max. Height 120 mm   Filling ranges:   50 ccm to 250 ccm filler with fruit dosing  30 ccm to 150 ccm filler with fruit dosing  Closure: sealing lid   Control Siemens S7   Scope of delivery  Filling machine | HAMBA | BK 8008 A | 1997  Tray erector | Schäfer and Flottmann | SFS 337 | 1997  Empty crate conveyor | Manex | - | 1997  Packer | AF | - | 1997  Integrated in SIG HAMBA BK 8008 P system  Good maintenance condition  Full crate conveyor | Manex | - | 1997  Layer palletizer | Manex | - | 1997 (revision 2004)  Dueb Hlst Uw E Djubaet

Condition: used, Year of construction: 1999, Overview This SIDEL blow moulder and KHS filling monobloc were both manufactured in 1999. They are still in production until the end of October and can be viewed in person. The special feature of the filler is that it can process carbonated or still mineral water with natural flavors using a micro-dosing unit. The filler (KHS Innofill monobloc) and accumulation table (Sidel AQ) are also available without the blow molder (Sidel SBO 18 Series 2), price on request.  Technical Details Blow moulder | SIDEL | SBO 18 Series 2 | 1999 Current capacity: 23.400 bph in 1.25L Working hours: 40.000            Number of moulds: 18      Moulds type: Shell type quick change Formats produced: 1.25L Bottles: Cylindrical petaloid base Oven type: Sidel Neck personalization: PCO 1881  Type of preforms: with recycled PET resin Machine was regularly maintained     Machine equipped with:            Sidel preform tipper Sidel hopper with cover & feeder Sidel preforms unscrambler Sidel preforms infeed rail Blowing station for 18 moulds Sidel electrical cabinet with Siemens Sidel PCC drive & control Lanfranchi bottles buffer storage silo            Unscrambler and air conveyor system with drive to the entry KHS monobloc Supplied with all format & spare parts available Rinser, Isobarometric Filler, Capper Monobloc | KHS, Zalkin | VK-E 40/50/10/S PET | 1999 (low working hours) Filling carbonated mineral water and also carbonated mineral water with natural flavours Processing: PET bottles 1,25L & 0.50L cylindrical petaloid base Bottle neck: PCO28 1881 Current capacity: 23.400 bph Number of rinsing nozzles (KHS Innoclean): 40 Number of filling valves (KHS Innofill): 50 Number of capping stations (Zalkin): 16 Including also micro-dosing unit Perrier for natural flavours With caps magazine & elevator Accumulation table Gebo Sidel type AQ file Dynamic accumulation and buffer between the filler outlet and the labeller inlet, avoids untimely stops upstream (filler, blow-moulder) due to the labeller Deb Hsrqar Selubaeut

Condition: used, Year of construction: 2007, Overview  The filling line for gable top packaging was manufactured in 2008 by the Norwegian company Elopak. It consists of a carton filler, cap applicator, and packer. The filling line is still installed, but no longer connected. However, it can be inspected in person. Technical Details  Capacity: 8,000 cartons/ h Formats: 0,5l 0,75l 1,0l Operating hours: 32,500 Scope of Delivery  Aseptic Carton Filler | Elopak | S-PS80HA | 2008 3x Cap Applicator | Elopak | PLA-S30 | 2009 Tray Packer | OYSTAR A+F | Traypacker TF | 2011 Dujb Hluoty Ddxsbaot

Condition: used, Year of construction: 2012, Overview The crater & decrater Linapac II was built in 2012 by German manufacturer Krones. The column was replaced by a new one in April 2021. Techn. Details Formats 3x4 (0,75 lt – 1,00 lt) 4x5 (0,5 lt) 6x12 picking heads Automatic format change Djb Hlubju Huyksaout

Condition: used, Year of construction: 1998, Overview This This tumbler, type: Dorit VV-7-2000-B is the perfect massaging unit. Ideal unit for butcher, shops or restaurants and hotels, as well as units for medium and large industrial processors. Technical details Output: approx. 1000 kg/h (depends on the product) Scope of delivery Tumbler | VV-7-2000-B | Dorit | 1998 Duebjuwz Hlo Hlubaot

Condition: used, Year of construction: 2006, Overview This bread roll machine, type: Kemper Quadro Roll was built 2006 in Germany. The divider allows you to form dough of various shapes and sizes. The most important features of the device: Capacity: 6,000 pieces/h Number of rows: 5 Product: round or square Dough dividing range: 40 - 150 g (square rolls), 40 - 100 g (round rolls) working width 800mm Integration: Possibility of connecting the machine with the soaking and sprinkling station and the putting table. Technical Details 5 rows 400V/ 50Hz Scope of delivery Bread roll machine | Kemper | Quadro Round | 2006 Djb Hlubjvq N Elsajut

Condition: used, Year of construction: 2019, Overview  The inspector “Linos S2” was manufactured in 2019 by the German manufacturer Loell. The machine was regularly maintained by OEM and is still in operation. As the brewery is stopping the production on this line, they are no longer in need of this machine. Tech. Details Running direction: left-right Detections: Bottom inspection camera Sealing surface inspection camera Sidewall inspection camera Residual liquid and residual caustic detection Thread inspection Formats: 0,33 l Longneck (brown/green/white) 0,5l NRW (brown with crown cork) 0,5l NRW (white with thread) 0,5l Euro (brown) 0,33l Euro (brown) 0,33l Vichy (brown) 0,33l Gourmet Scope of delivery  Ejector after machine Dusbsvlxfqj Hlubaot

Condition: used, Year of construction: 2005, Overview This automatic 14 needle injector, type: P14 was built in 2005 in Switzerland Smallest automatic units with 14 needles in 2 rows For better economic efficiency in small and medium-sized companies Repeatable accurancy on injecting with single neelde valve control Manual feed rate adjustment Construction: Completely stainless-steel, fully isolated. Technical Details Length/ width/ height: 1200 mm 450 mm 1800 mm Power: 0.75 kW Max product height: 180 mm Max product width: 280 mm Scope of delivery Automatic needle injector| Pökomat | P14| 2005 Dueb Hlusvttf Uebaet

Condition: used, Year of construction: 2012, Overview This labeling machine, type: Novexx Solutions ALS 206 was built in 2012 and ws used for carton-labeling. With this solution, labels with a width of from 10 – 156 mm (material width incl. carrier material max. 160 mm) on the side of products become. The surface of the product must be flat in order to ensure uniform label application. It Paper and rigid PE label materials can be used become. The maximum dispensing speed is 30 m/min. The tripod with the vertical and horizontal Adjustable spindle allows flexible integration into a Assembly line system. The product sensor must be connected to the M12 connector of the ALS. Top labeler and bottom labeler printing unit with infeed and outfeed belt. Upper unit model ALS 206, subunit ALX 924/5. Can be supplied with computer and label machine for cardboard labels. Incl. tripod. The subway labeller was new 2 years ago. It is an overhoult device. Technical Details Dispensing speed: Up to 30 m/min Material width incl. material carrier: 10 - 160 mm Label length: 5 - 600 mm Label roll diameter: up to 300 mm Data interfaces: RS 232C, Ethernet, USB Scope of delivery Top labeler | Novexx Solutions | ALS 206 | 2012 Bottom labeler | Novexx Solutions | ALX 924/5 | 2022 Dob Hsvrfh Eslubasut

Condition: used, Year of construction: 2008, Overview This cup filling machine was built in 2008 by the German manufacturer Ampack. The machine was last used by a dairy company, is in a well-maintained condition and is available immediately. Technical details Output: approx. 8,000 cups/hour Dosing units (servo-controlled): Pre-doser: 20 -250 ml Main doser: (80)100 -600 ml Cerialiser (tbd): 5-60 grams Free dosing space Current format sets 4 - corner ZKB, 8 - corner ZKB, round ZKB Control system: Siemens S7 Weight: approx. 25 tonnes Further information, pictures, and videos of the machine on request. Duob Hlujvn Txqebaet