Used beverage production for sale (1,179)

Condition: used, Year of construction: 2021, Overview  This isobarometric filler was built in 2021 by the German manufacturer Markl. It can fill cans abd glass bottles. This filler is available because the seller is selling the complete equipment. It has only a few operating hours and can be viewed in person at any time.   Technical Details  Type: Isobarometric filler for bottles and cans Capacity: 8,000 bottles / hour (depending on format) Number of filling valves: 20 Formats:  Bottles: 0.33 L Longneck and 0.75 L Cava Cans: Standard 0.33 L and 0.44 L Counter-pressure filler Running direction: left - right Dimensions (L x W x H): 2.0 m x 1.8 m x 2.5 m Operating History: In operation: June 2021 – June 2024 Last production run: June 2024 Dismantled: February 2025 Estimated total working hours: approx. 625 hours (~500,000 liters filled at 2,500 units/hour) Good condition, ready for reinstallation Dkjdst Rmhmjpfx Ah Uow

Condition: used, operating hours: 1,000 h, Used Filling Line Doypack / Tetra Pak 600 kg/h Technical Configuration of the Filling Line The Used Filling Line Doypack / Tetra Pak 600 kg/h includes a sequence of machines from 2015 that deliver precision, hygiene, and reliability in filling flexible pouches. Initially, the process starts with product preparation and feeding, ensuring uniform consistency and stability before filling. Subsequently, an FL Tecnics machine—model FL 2.2—handles pouch feeding, weight-based filling, sealing, and packaging. In particular, a VARPE control system measures product weight in each pouch with high precision, thus minimizing variation and waste. At the same time, another VARPE unit performs X-ray inspection, which detects any contaminants or structural issues. Consequently, this adds a critical layer of safety and quality control. Meanwhile, a spiral air-flow pasteurizer manufactured by SARP performs the pasteurization phase. Dkedpfx Ahjvguc Us Ujw Unlike other systems, this design treats the product uniformly while preserving its sensory characteristics. Finally, a case packer completes the packaging process, efficiently organizing and preparing the filled pouches for shipment. Taken together, these components enable the Used Filling Line Doypack / Tetra Pak 600 kg/h to deliver a safe, consistent, and high-performance packaging operation. Production Performance and Operating Condition The Used Filling Line Doypack / Tetra Pak 600 kg/h processes up to 600 kilograms of product per hour. Thanks to its engineering, it maintains consistent dosing and minimizes downtime. Its weight-based filling system ensures accurate volumes in each pouch, thereby reducing overfill and adhering to production specifications. Notably, the line has only operated for about 1,000 hours, during which it produced around 5 million pouches. Given this, the system remains in near-new condition. Therefore, facilities can expect long-term reliability with minimal wear. In terms of maintenance, this translates to reduced operational costs and higher uptime. Versatility in Product Type and Formats The used Doypack/Tetra Pak filling line works with pouch sizes from 90 grams to 150 grams, using weight-based precision filling.. Due to this, operators can process a wide variety of products, including baby food, ready-to-drink beverages, dairy items, sauces, and creams. More importantly, technicians can easily adjust dosing parameters to suit different product viscosities or packaging standards. Accordingly, this system provides high flexibility for companies handling multiple product lines. Furthermore, weight-based filling enhances yield accuracy, which helps manufacturers meet labeling and legal compliance requirements. Operational Safety and Technical Documentation Each machine in the Used Filling Line Doypack / Tetra Pak includes integrated safety features that meet European standards.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, 1 x Cime Careddu automatic inline rinsing and filling machine for 1L bottles. Suitable for filling glass and PET bottles. Model - SILVER 16/16 (16 x heads). Serial number - 528. Dksdpfx Ahsulpmzj Uow Date of manufacture - 2012. Can handle and fill bottles up to 2 litres in capacity but this unit is supplied with change parts for 1 litre bottles. Overall dimensions - 2.8m L x 1.7m W x 2.25m H. In operation until 14/10/2024, can be viewed working until this point.

Condition: used, Year of construction: 2012, Overview This industrial air dryer was manufactured in 2012 by the Swedish company Atlas Copco. The FD760 VSD model is a refrigeration-type dryer designed for continuous operation in compressed air systems up to 14 bar, with a maximum flow capacity of 760 L/s. The unit is still installed and connected, has been regularly maintained, with the latest maintenance completed in August 2025, and is in excellent operating condition. It is immediately available and can be inspected on site. Technical data  Application: Air dryer for 7 7-bar low-pressure compressor Flow Capacity: 760 L/s Operating Pressure: Up to 14 bar Power Supply: 5.6 kW Refrigerant: R410A Weight: 380 kg Dedpjxrnn Dofx Ah Uekw

Condition: used, Year of construction: 1998, AVE Aurora 12/1 Filling Monoblock – Overview The AVE Aurora 12/1 Filling Monoblock is a compact filler-capper unit engineered for dairy applications, specifically designed for PET bottles used in milk and yogurt packaging. This second hand monoblock integrates filling and capping operations within a single synchronized frame to optimize space, efficiency, and hygiene on a used bottling line. Manufactured by AVE, a respected Italian brand in industrial packaging machinery, this model provides reliable performance for beverage production where gentle product handling and sanitary design are essential. With a capacity of up to 2,000 bottles per hour at 1.0L, the Aurora 12/1 supports common dairy formats such as 0.5L and 1.0L PET containers with a 38mm neck finish. Its 12/1 configuration denotes 12 filling valves and 1 capping head, offering a balanced throughput for medium-scale operations. The machine’s monoblock architecture simplifies line layout and reduces product exposure, making it a practical solution for milk and yogurt filling within industrial packaging environments. Technical Specifications & Performance Data Manufacturer: AVE Model: Aurora 12/1 Year of manufacture: 1998 Machine type: Filling Monoblock (filler + capper) Production speed: up to 2,000 bph at 1.0L Container types: PET bottles Bottle formats: 0.5L, 1.0L Neck finish: 38mm Configuration: 12 filling valves / 1 capping head Advanced Automation & Control Systems Dkjdpfx Aoxurp Rjh Usw The monoblock configuration synchronizes filling and capping turrets for precise container handling and repeatable performance. The integrated design helps minimize handling steps and supports hygienic operation for dairy products. Quick mechanical adjustments facilitate format changes between 0.5L and 1.0L PET bottles, while the unified drive concept maintains stable throughput and consistent cap application. Safety guarding and interlocks are typically provided to protect operators and ensure consistent operation. Production Line Integration Capabilities This AVE monoblock is suited for inline integration with standard beverage production equipment such as infeed conveyors, bottle unscramblers or depalletizers upstream, and downstream labelers, inspectors, and packers. Its compact footprint helps simplify layout in existing used bottling lines. The machine handles 38mm neck PET bottles and supports typical dairy volumes, enabling flexible use across milk and yogurt SKUs within beverage production and industrial packaging environments. Machine Condition & Maintenance History The unit is offered as a second hand filling monoblock and is presented for sale in working condition, ready for operation subject to standard installation and commissioning procedures. As with any pre-owned bottling equipment, buyers are encouraged to verify specific maintenance records, conduct inspection, and confirm performance on their product and formats.

Condition: used, Year of construction: 2014, Overview This Haloila Octopus T 200 automatic ring wrapper was manufactured in 2014 and enables efficient and automated pallet packaging. It was used in a CSD line from 2005, in which it processed only the half and quater pallet. Full pallets were stretched on a second winder, therefore the working hours are low on this machine. As the line was sold this machine remained unsold and is now stored in our warehouse. Technical details Processed pallet formats: 600 x 400 800 x 600 1,200 x 800 Equipment: Automatic film magazine Central hold-down device Safety fencing Also available: chain conveyors for pallets Djdpfx Ajxrm Snoh Uskw

Condition: used, Year of construction: 2004, ALTEC PO 12/1 Filling and Capping Monoblock – Overview This used ALTEC PO 12/1 filling and capping monoblock is engineered for efficient bottling operations within beverage production and industrial packaging environments. Designed to handle both PET and glass bottles, it is suitable for water and 100% fruit juices, as well as other low-viscosity still liquids. With 12 filling valves and 1 capping head, the machine offers compact, integrated performance for second hand and used bottling line applications. Manufactured by ALTEC, the monoblock supports hot or cold filling modes for still products, making it a versatile choice for small to medium production runs. Variable speed control via a frequency regulator allows operators to adapt throughput to different container sizes and product requirements. Technical Specifications & Performance Data Model: PO 12/1 Manufacturer: ALTEC Year of manufacture: 2004 Configuration: Filling and capping monoblock No. of filling valves: 12 No. of capping heads: 1 Max. capacity: up to 3,000 bph on 0.5L; up to 2,000 bph on 1.5L Container types: PET and Glass bottles Fill volumes: 0.5L, 0.85L, 1.0L, 1.5L, 2.0L Filling mode: Hot or Cold filling for still liquids Power: 3 kW Compressed air: 6 bar Dimensions (monoblock): 2300 x 1500 x 2300 mm (L x W x H) Stand with balance tank: 1050 x 600 x 1000 mm Closure system: 28 mm plastic screw cap; setup for short neck PCO 1881 Optional closure equipment: support for 38 mm sport cap (subject to available tooling) Dodjxurp Dspfx Ah Uokw Control: Siemens control (HMI with small display inside cabinet) Advanced Automation & Control Systems The ALTEC PO 12/1 integrates a Siemens control platform providing reliable automation and straightforward operation. A frequency regulator (VFD) manages the charging speed, enabling quick adaptation to production demands and bottle formats. The compact HMI located in the control cabinet gives operators access to essential machine parameters. Siemens control for consistent, proven reliability Frequency-regulated variable speed for flexible throughput Operator access via small integrated display Production Line Integration Capabilities This monoblock fits seamlessly into a used bottling line or standalone station within beverage production. It is designed for PET and glass containers and can interface upstream with a rinsing machine and downstream with labeling, inspection, and packaging equipment. Format changes are supported across multiple bottle sizes from 0.5L to 2.0L, and several format parts are included. Inline or standalone operation in industrial packaging lines Compatible with upstream rinsers and downstream labelers, inspectors, and packers Multi-format flexibility: 0.5L, 0.85L, 1.0L, 1.

Condition: used, Year of construction: 1997, Overview This crate washer was manufactured in 1997 by the German company Klann. The 1800 N model is a single-bath crate washing system designed for cleaning beverage crates of various sizes at a capacity of up to 2000 crates per hour. It is still installed and immediately available. Technical data  Capacity: 2000 crates/hour (for GDB crates, lengthwise) Crate formats: 12 × 0.7 L crates (lengthwise) Baths: 1 Construction: Stainless steel Length (total): 4,640 mm Width: 1,300 mm Electrical connection: 16 kW Vapor extraction Dedpfxjxrg H Ss Ah Uekw

Condition: used, Year of construction: 2004, Used Shrink Wrapper MIMI – Overview This used MIMI shrink wrapper is engineered for grouping and overwrapping PET bottles into stable retail-ready bundles on a modern used bottling line. Designed for industrial packaging and beverage production, it delivers dependable second hand performance with efficient film-only bundling. The machine is configured for straight infeed handling of round bottles and supports multiple pack patterns without cardboard backing, making it a versatile choice for high-throughput packaging operations. Built for continuous-duty operation, this shrink wrapper is well-suited to integrate into existing bottling equipment and packaging machinery. It is a strong fit for beverage production environments where consistent pack quality, format flexibility, and reliable throughput are essential. With compatibility for common PET bottle sizes and standard pack matrices (3×2, 2×4, 3×4), it helps reduce material consumption by eliminating trays or pads while maintaining pack stability after heat shrinking. Technical Specifications & Performance Data Manufacturer: MIMI Machine type: Shrink Wrapper Year of manufacture: 2004 Capacity: up to 6,000 bottles/hour or 100 packs/hour (depending on pack configuration) Bottle sizes supported: 0.33L, 0.5L, 1.0L, 1.5L Container types: PET bottles Pack configurations: 3×2, 2×4, 3×4 (trayless, no cardboard backing) Infeed orientation: Straight infeed for round bottles Advanced Automation & Control Systems The machine is designed for inline, conveyor-fed operation typical of automatic shrink wrapping systems. Standard industrial protections and operator interfaces support routine adjustments and format changes. Exact PLC/HMI, electrical ratings, and power data are not specified in the available documentation. Production Line Integration Capabilities This shrink wrapper integrates smoothly with upstream and downstream bottling equipment, including conveyors from fillers, labelers, and pack conveyors to palletizing. The straight infeed accommodates round PET bottles and allows quick transitions between pack matrices. Its trayless film bundling reduces material handling and simplifies logistics while maintaining pack integrity after the shrink tunnel. Machine Condition & Maintenance History The machine was removed from service in 2019 and is currently not in active production. It is offered as a second hand unit suitable for recommissioning. Specific maintenance logs and operating hours are not provided in the available documentation. Dodpjxurm Ajfx Ah Uokw Operational Performance & Versatility Optimized for PET bottles, this shrink wrapper covers the most common beverage bottle sizes from 0.33L through 1.5L. Its ability to produce 3×2, 2×4, and 3×4 bundles without cardboard backing supports cost-efficient industrial packaging while preserving good pack stability following shrinking.

Condition: used, Year of construction: 2004, Overview The Solo Screw Capper was manufactured in 2004 by the German engineering company Dr. Datz. The machine can process aluminum screw caps. It was used in a bottling line of a mineral water company. The line mainly used for contract bottling and was now stopped, to be sold in parts. Technical Specifications: Number of closing elements: 8 Capacity: up to 20.000 bph Cap type: 28mm aluminum screw cap Working direction from left to right Format: 0,7l GDB bottle Dksdpfx Aoxrfzhoh Uow

Condition: used, Year of construction: 2008, operating hours: 30,000 h, Used Aseptic Filling Machine Tetra Pak A3/Flex 150V TBA 1000B – Overview This second hand Tetra Pak A3/Flex 150V TBA 1000B is a proven aseptic carton filler engineered for industrial packaging and beverage production. Configured for Tetra Brik Aseptic 1000 ml (Base) packs, it delivers reliable, continuous operation for UHT milk, juices, and other shelf-stable beverages. With a nominal capacity of approximately 7,000 packs/hour, this used bottling line component combines high throughput with aseptic integrity for modern carton packaging. Technical Specifications & Performance Data Manufacturer: Tetra Pak Model: A3/Flex 150V TBA 1000B Year of manufacture: 2008 Filling type: Aseptic (non-isobaric carton filling) Package format: Tetra Brik Aseptic 1000 ml (Base) Nominal speed: ≈ 7,000 packs/hour Working hours: ≈ 30,000 hours Utilities Electrical: 400 V, 50 Hz, 3-phase Installed power: up to ≈ 50 kW (typ. 35–50 kW depending on configuration) Compressed air: 6–8 bar, ≈ 300–500 Nl/min Water/steam: ≈ 0.5–1.0 m³/h (for processing/sterilization utilities) Dimensions & Weight Approximate footprint (L × W × H): 7 × 3 × 4.5 m Approximate weight: ≈ 7,000 kg (model range 6,000–8,000 kg) Note: Technical values are indicative for this A3/Flex configuration and should be confirmed during inspection/FAT. Advanced Automation & Control Systems The A3/Flex platform features OEM PLC-based control with a touchscreen HMI for recipe handling, alarms, and diagnostics. Motion control synchronizes forming, filling, and sealing cycles to maintain aseptic integrity and packaging quality at high speeds. Typical capabilities include: Dkedpfx Asxt Eqreh Uew Recipe management for UHT milk, juices, and beverage variants Integrated process supervision and event/alarm logs I/O provisions for upstream/downstream line devices Recommended verification prior to start-up: PLC functions, valve actuation, pump performance, and seal integrity Production Line Integration Capabilities This aseptic carton filler integrates efficiently within a used bottling line or new beverage production layout: Upstream: packaging material feed and sterilization modules as per OEM design Downstream: conveyors to accumulation, straw/cap applicators, case packers, palletizers Utilities/process: interfaces for CIP/SIP connection to plant systems, sterile air, water, and steam Controls: standard digital/analog I/O and fieldbus-ready architecture depending on configuration Ideal for second hand industrial packaging projects requiring aseptic carton formats and stable high-speed operation. Machine Condition & Maintenance History Condition: used, currently in storage Approximate machine hours: ≈ 30,000 Operational note: continuous production achievable with proper preventive maintenance Recommended checks before commissioning: pumps, aseptic valves, PLC functionality, elastomers and seals Routine inspection, replacement of wear parts, and validation of aseptic barriers are advised prior to restart.

Condition: used, Year of construction: 2009, Overview This KEG bottling unit Micromat 2/2-b was built by M+F KEG Technik in 2009. It is composed of a KEG washer and KEG filler. Until dismantling it was used in a brewery in Belgium. Technical details  Capacity: 20- 35 keg/h KEG type: 20l/30l DIN and EURO Fitting type: Typ S Station 1: Interior cleaning Station 2: Rinsing, sterilization and filling Semi automatic system with intergrated CIP, CIP tank at the back of the installation Dimensions  Length: 1,100 mm Width: 1,300 mm  Height: 2,200 mm +/- 50 mm  Electrical connection Voltage: 230/ 400 V, 50 Hz, 3 phases Connected load: 0,5 kW (without tank pumps)  Dkodpfx Ahoxrfcxs Ujw

Condition: used, Year of construction: 2018, Overview This isobaric filler was manufactured in 2018 by the Italian company Rizzolio Equipment S.r.l.. The unit was originally purchased for starting a new carbonated water production project, but the project was never realized. The machine has never been used, is still wrapped, and remains in as-new condition. It is immediately available. Technical data Capacity: 150–450 bph Formats: 0.5 L and 1.0 L glass bottles with pilfer cap (adaptable with proper adjustments and heads) Filling system: Isobaric Filling heads: 2 Power supply: 230 V, 50 Hz, single-phase, 2.0 kW Construction: Stainless steel Control options: Manual/automatic CO₂ purge & wash selector, vacuum pump control Dsdpfoxa Apfex Ah Ujkw

Condition: used, Year of construction: 2011, Overview  This shrink packer was manufactured in 2011 by the Italian company Giemme Thermo. The Giemme SLH is a film-only shrink wrapping machine used for secondary packaging of multipack PET bottles (1.5 L format). The machine is equipped with two parallel lanes, allowing high throughput and flexibility in packaging configurations. The machine is no longer in production but still installed and will be available from December 2025. A set of spare parts is included, and dismantling and truck loading can be quoted separately. Technical data  Capacity: 20 cycles/min Formats: 2 × (3 × 2) × 1.5 L 6 × (2 × 1) × 1.5 L Application: Cider, lemonade, soda, carbonated beverages Power Supply: 40 kW Dimensions (L × W × H): 650 × 170 × 250 cm Configuration: Dual-lane infeed for higher flexibility Film Type: Shrink film only (no tray) Condition: Very good; still installed and connected Availability: 20 December 2025 Dkodpoxrc Hhefx Ah Uew

Condition: used, Year of construction: 2009, Overview  This complete compressed air installation was manufactured between 2009 and 2013 by Atlas Copco (Sweden) and Donaldson Filtration GmbH (Germany). The setup includes two Atlas Copco GA132 VSD low-pressure compressors, one Atlas Copco FD160 VSD air dryer, and one Donaldson UFA-AC0016 oil separator. Designed to deliver reliable and energy-efficient air supply at up to 8.5 bar, this system is ideal for continuous production environments. The installation has been regularly maintained, with full maintenance completed in August 2025, and is in good working condition. The entire system is still installed and connected, and immediately available for inspection and sale. Technical data  Years of Manufacture: 2009 – 2013 Application: Industrial compressed air system Total Capacity: 2 × 24.1 m³/min Maximum Pressure: 8.5 bar Power Supply: 274.8 kW Scope of Delivery  Compressor | Atlas Copco | GA132 VSD | 2013 Compressor | Atlas Copco | GA132 VSD | 2012 Air dryer | Atlas Copco | FD160 VSD | 2012 Oil separator | Donaldson Filtration GmbH | UFA-AC0016 | 2009 Dkjdexrc Acepfx Ah Uow

Condition: used, Year of construction: 2012, Overview  This complete filling line for returnable glass bottles was manufactured in 2012 by leading European producers Krones, Sidel, and Kettner. The line is designed for high-capacity beverage production, handling up to 42,000 bottles per hour in 0.33 L contour bottle format. It includes all necessary components from depalletizing to final palletizing and labelling, making it a complete turnkey system for bottling operations. The line underwent annual maintenance in August 2025 and was stopped on September 1st, 2025. It remains installed and connected, and can be inspected upon request. Technical data  Capacity: 42,000 bph Formats: 0.33 L contour bottle Application: Beer, CSD, or other beverages in returnable glass bottles Line length: Approx. 103 × 29 m Condition: Excellent; maintained until shutdown (September 2025) Availability: Immediate Status: Still installed and connected Scope of Delivery  Depalletizer | Kettner | 60 pallets/hour | 1992 | Automatic, glass bottles Decrater | Kettner | 2,500 crates/hour | 1992 | For returnable crates Crate washer | Seroba | 2,500 crates/hour | 1992 | Stainless steel, single bath Bottle washer | Krones | 47,200 bottles/h | 2010 | Multi-zone cleaning Empty bottle inspection | Heuft | 46,000 bottles/h | 2012 | Camera system Filler | Krones | 42,300 bottles/h | 2012 | Glass bottles, return operation Labeller | Krones | Topmatic | 2012 | 2 stations (body & back), pitch 125mm + Checkmat Fill level & closure inspection | Heuft | 43,000 bottles/hour | 2012 | Sensor & camera system CIP & mixer station | KHS | 16,500 liters/hour | 2011 | Integrated, fully automatic Printer | Videojet | 43,000 bottles/hour | 2012 | Inkjet printer Packing machine (Crater) | Kettner | 2,200 crates/hour | 1992 | Automatic Palletizer | Kettner | 50 pallets/hour | 1992 | Automatic Pallet wrapper | Robopac | 50 pallets/hour | 1992 | With stretch film Pallet labeler | Logopak | 60 pallets/hour | 2014 | Labeling of pallets Bottle conveyor belts | Sidel Gebo | – | 2012 | Stainless steel conveyor technology Dkedpfx Asxrcv Neh Uow

Condition: used, Year of construction: 2010, Overview The SE 68 B compressor was manufactured by the Belgian company Ateliers François S.A. in 2010. It was used by a big european contract bottler before it was dismantled. It is now located in our warehouse in Germany. Technical data Free air delivery: 2500 m³/h  (43,3 m³/min) Operating pressure: 40 bar Speed rpm: 498 Power: 450 kW Installation type: Mounted on skid with anti-vibration mounts Scope of Delivery  1 × High-pressure compressor 40 bar | Ateliers François  1 × Refrigeration dryer 1 × Electrical control cabinet (CE) Dedpfx Aexrcmzsh Ujkw

Condition: used, Year of construction: 2021, Overview This cutter for vegetables and fruits, type: Jegerings  BCM-1650 was built in 2021 in the Netherlans. This machine is in good condition. Cutting machine with high capacity, particularly suited for vegetables and fruits. Industrial vegetable cutting machine manufactured by Jegerings. Designed for high-precision slicing, dicing, or shredding of vegetables in industrial food processing lines, ensuring consistent results and high throughput. Technical Details Model: BCM-1650 Year of manufacture: 2021 Serial Number: 872213117074 Electrical Supply: 1 Ph, 230 V, 50 Hz Installed Power: 1.85 kW Current: 7.9 A Capacity: Up to 1.000Kg/h Certification: CE Marked (European conformity) Scope of delivery vegetable strip cutter | Jegerings | BCM-1650 | 2021 Dodpfsxq A Najx Ah Ujkw

Condition: used, Year of construction: 2022, Overview The rotary filling and capping machine manufactured by Bertolaso in 2022 is currently used for vinegar production. It features 30 filling valves and 4 capping stations and operates based on the vacuum filling principle. The machine can be used with a wide range of shape-stable containers and is suitable for filling low-viscosity, non-carbonated liquids. Technical details:  Filler: 30 valves (Ø16 mm), model Olimpia 30/1050 Capper: 4 Pick & Place heads, model Sigma P&P 4/350 Bottles: 600 ml & 1000 ml cylindrical (range Ø55–95 mm, H160–360 mm) Caps: Pre-threaded plastic Output: 8,000 bph (600 ml) / 6,000 bph (1000 ml) Material: All product-contact parts in AISI 316 stainless steel Bowl: Electrically height-adjustable, mechanical float level control Features: Automatic valve opening/closing Centralized fill-level adjustment (±50 mm) Maintenance-free lifting cylinders Automated lubrication system Integrated washing/CIP system Remote teleservice via Ethernet Safety: CE compliant, transparent guards with microswitches Includes: Format parts for 600 & 1000 ml bottles; adjustable star wheels (+/- Ø55-95mm)   Dodpfx Asxqz D Aeh Uskw

Condition: used, Year of construction: 2013, Overview Complete filling line from the food sector made by the German manufacturer Breitner (2013). It was previously used for filling liquid cheese products and sealed with press on and screw closure. Further more spray pumps with rising pipes can be handled. Due to various additional features, such as a laminar flow system and special attention to hygienic design, a cleanroom classification is achieved. Machines: Pos. 1 Bottle unscrambler Breitner BFC 8002 (2013) Pos. 2 Filling machine Breitner MDL 2086 (2013) Pos. 3 Rotary capping machine Breitner SRT 5044 (2013) Conveyor systems: several conveyors included. All conveyors: Chain width: 82,5 mm Belt housing: stainless steel AISI 304 Belt guide: plastic c-profile, 2-fold and stainless steel rods Chain material: Delrin steel The unclosed bottles are protected of falling dirt by a roof made of plexiglas over the conveyor.  Bottle formats: Our service: send us your requirements and we will check the possibility of processing your bottle format. Cap formats: Screw caps, press-on caps, spray pumps with riser pipes   Our service: send us your requirements and we will check the possibility of processing your cap format. Capacity: Unscrambler: max. 6.000/h Filling machine: max. 5.000/h Rotary capping: max. 5.000/h The output depends on the container and cap geometries and the filling product.    1. Bottle Unscrambler BREITNER BFC 8002 Operation: continuous from supply bin Bin volume / drum Ø: 1.4 m³ / 1500 mm Working height: 900 mm, left → right Material / Housing: AISI 304 stainless steel + plexiglass Safety: door switches, overload protection Power / Air: 3 × 400 V, 4 kW / 400 Nl/min at 6 bar Container size: round Ø ≤100 mm × 250 mm, larger on request Feature: blow-cleaning station with ionized air and dust extraction 2. Filling Machine BREITNER MDL 2086 Filling: mass flow, 8 stations (expandable to 12) Filling range: 100 – 2000 ml/g, up to 5,000 bottles/h Working height / direction: 900 mm, left → right Product-contact parts: AISI 316, food-grade hoses, VITON seals Tank / Pressure: 100 L, 5 bar Power / Air: 3 × 400 V, 4 kW / 150 Nl/min at 6 bar Container size: H 50–350 mm, Ø/width 50–80 mm, various shapes CIP cleaning: 8 cleaning cups, automatic spray & drain, multi-step program Extras: laminar flow, remote maintenance, additional filling valves, swiveling tray, heating system 3. Rotary Capping Machine BREITNER SRT 5044 Operation: continuous rotary, 4 capping stations Output: up to 5,000 containers/h Container size: Ø ≤100 mm, H ≤300 mm Working height / direction: 900 mm, left → right Drive / Tools: servo motor, 0,3-3,5 Nm; BREITNER capping tools Power / Air: 3 × 400 V, 4 kW / 100 Nl/min at 6 bar Control: B&R controller, touchscreen, 200 format memories, password-protected Safety & inspection: door switches, overload, “No bottle – no closure,” optical cap check, reject system Extras: servo vertical movement, torque monitoring, fan-based cap feed, vibratory sorter VIB 8001, cap supply SFB 8001 Dkjdpfx Ahjxqzmwj Uew

Condition: used, Year of construction: 2002, Overview Aseptic PET filling line for fruit juices, juice-based beverages, and spritzers, built 2002–2007 by KRONES. Suitable for still and carbonated products (carbonation currently disconnected). Covers blowing, filling, labeling, packaging, palletizing. Bottle sizes 0.5–1.5 L, 28 mm closures. Nominal output: 20,000 b/h (1.0 L still). Fully assembled, out of operation, viewing by appointment. Technical details Capacity: up to 24,000 b/h (0.5 L still) Bottle sizes: 0.5–1.5 L PET Products: still/carbonated, with/without pulp Closures: 28 mm flat cap Years of manufacture: 2002–2007 Scope of delivery Pos. 1 Control unit: Ruland 2002, touchscreen, flash heating & CIP/SIP Pos. 2 Pasteur: Ruland 2002, tube heat exchanger, 1315 L supply tank, max. 21,800 L/h Pos. 3 Sterile tank: Roth 2002, 11,000 L Pos. 4 Carbonization: Roth/Ruland 2002, 2575 L, disconnected Pos. 5 Nitrogen system: Terboven/ISTE 2002 Pos. 6 Hygienic center: Ecolab/Lang 2002, CAF, no PLC Pos. 7/8 Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L Pos. 9 CIP/SIP: Ruland 2002, 20,000 L/h, 1315 L supply tank Pos. 10 Cleanroom: Weiss 2002, ventilation/overpressure Pos. 11 Preform hopper: Dieterle 2002, MD3 Pos. 12 Preform feeding: Tanner 2002, HFT 4730 / RGT 1624 Pos. 13 Blow molding: Krones Contiform S16 2002, 16 stations, 1.0–20,000 b/h Pos. 14 Air conveyor: Krones 2002, automatic rail adjustment Pos. 15 Cap conveyor: Gassner 2002, 2 container positions, cap elevator Pos. 16–18 Filling machine: Krones CAF VODM 100 2002, injector (60), rinser (80), filler (100), capper (20), 1,0–20.000 b/h, 28 mm caps, still/carbonated Pos. 19 Label check: Krones 2002, incl. in Prontomodul Pos. 20 Bottle check: Krones 2002 Pos. 21 Conveyor: Krones 2002, air blower before labeling Pos. 22 Labeling machine: Krones Prontomodul 2007, max. 35.600 b/h Pos. 23 Canmatic module: Krones 2007, paper labels Pos. 24 Contriroll module: Krones 2007, film roll Pos. 25 MHD coding: Videojet Excel/170i Pos. 26 Shrink wrapper: Krones Variopak 2002, 0.5–36,000 b/h, carton feeder & film transport Pos. 27 Packaging conveyor: Krones 2002 Pos. 28 Handle applicator: Twinpack MHTE 2002 Pos. 29 Empty pallet magazine: Krones LPM 2002 Pos. 30 Palletizing: Krones robot 3A loader 2002, 4,000 packages/h Pos. 31 Pallet conveyor: Krones 2002, transfer cart & turner Pos. 32 Empty pallet magazine: Krones LPM 2002 Pos. 33/34 Pallet stretch wrappers: Franpak 2002, top sheet applicator Pos. 35 Tying machine: Bornbinder HB 2002 Pos. 36 Pallet coding: Logopak EAN 128 2003 Dkedpfx Asxqqpush Uew

Condition: used, Year of construction: 2022, Overview  This automatic bottle unscrambler was manufactured in 2022 by the German company Breitner Abfüllanlagen GmbH. The model BFA 8003 is a high-performance, fully automatic plastic bottle unscrambler designed for gentle handling and fast format changes with minimal change parts. It offers reliable operation even with challenging bottle geometries and lightweight PET containers. The machine is a trade fair model, never used in production, and is therefore in as-new condition. It was only showcased at exhibitions and comes with a 12-month manufacturer warranty. Technical data  Capacity: Up to 150 bottles/min Operation: Continuous from bulk hopper feed Bottle types: Plastic (PET, HDPE, etc.) Bottle dimensions: Ø up to 80 mm, length up to 100 mm, height up to 300 mm (larger possible upon request) Bottle orientation: Bottom-first via pneumatic flipping device Machine direction: Left to right Working height: 900 mm Frame: Welded, stainless steel (AISI 304) Sort drum diameter: 1,500 mm Control system: B&R industrial computer with 12.5” touchscreen, integrated diagnostics, remote access Electrical supply: 3 × 400 V, N, PE, 4 kW Compressed air: 400 Nl/min at 6 bar Machine guarding: Polycarbonate panels Safety: Error detection with clear text display Condition: As new (used for demonstration only) Warranty: 12 months manufacturer warranty Djdpfxexqpk Dj Ah Ujkw

Condition: used, Year of construction: 2011, Overview  This blower–filler–capper synchroblock was manufactured in 2011 by the Italian company Kosme S.r.l.. The model KSB 4R-40-10 IsoBlock combines stretch-blow moulding, isobaric filling, and capping in a single compact system. Currently used for cider filling in 1.5 L PET bottles at 7,200 bph (8 g/L CO₂), the machine remains in production until December 2025 and can be visited on-site by appointment. The system includes preform and cap feeding units, and the sale price includes dismantling, handling, packing, and truck loading. Note: CIP and mixer are not included in this offer. Technical data  Capacity: 7,200 bph (1.5 L, 8 g/L CO₂) Formats: 1.5 L PET bottles Neck finish: 28 BPF Filling system: Isobaric Blow moulding stations: 4 Filling valves: 40 Capping heads: 10 (Euro PK Arol) Application: Cider and carbonated beverages Machine dimensions: 1,760 × 660 × 330 cm (L×W×H) Condition: In production until December 2025 Availability: From January 2026 Included systems: Preform feeder, cap feeder Excluded systems: Mixer and CIP unit Dedpfx Ahoxqpkqe Ujkw

Condition: used, Year of construction: 2005, Overview This sleeve applicator was manufactured in 2005 by the French company Sleever International. The model Powersleeve was used for applying shrink sleeves on two 1.5 L bottles in twin-pack format (2×1.5 L). The machine is still installed and connected but no longer in use, and will be available from December 20, 2025. Technical data Capacity: 12,000 bph Formats: Twin pack (2 × 1.5 L) Application: Cider, carbonated beverages, lemonades, sodas Machine dimensions: 1000 × 155 × 250 cm Power supply: 6 kW Condition: Good, functional when disconnected Dkedpoxqn R Njfx Ah Uow

Condition: used, Year of construction: 2019, Overview  This vacuum filling and capping monoblock was manufactured in 2019 by the German company ALWID Maschinenbau GmbH. The model ALWID-SUPERIOR-48HV-10PP is designed for level filling of glass bottles using a high-vacuum system, making it ideal for low- to medium-viscosity liquids such as spirits or similar products. The system features 48 filling valves and a 10-head ROPP capping unit, ensuring efficient, high-precision operation. With a performance of up to 12,500 bottles per hour (0.7 L), it offers a professional solution for high-speed bottling lines. The machine is CIP-capable, equipped with spray balls, and includes a Siemens S7 control system. It has approximately 14,000 operating hours and is already dismantled. Missing peripheral components such as the cap sorter, bunker conveyor, and chutes can be procured upon request and a factory overhaul is also available upon demand. Technical data  Filling system: High-vacuum with liquid ring pump Capping system: 10-head ROPP (PP) closer Capacity: Up to 12,500 bph (0.7 L bottles) Filling valves: 48 Bottle size: Max. 105 mm (W) × 65 mm (D) for shaped bottles (every second valve used) Control system: Siemens S7 Cleaning system: CIP with spray balls Operating hours: Approx. 14,000 h Working direction: Right to left Dimensions (machine): 4.20 m × 2.80 m × 2.90 m (W×D×H) Dimensions (filling tower): 1.40 m × 1.30 m × 3.40 m (W×D×H) Scope of delivery  Filling and capping block | ALWID Maschinenbau GmbH | ALWID-SUPERIOR-48HV-10PP | 2019 | High-vacuum filler with 48 filling stations and 10 ROPP capping heads, Siemens S7 control system, CIP-capable, approx. 14. 000 operating hours Filling tower | ALWID Maschinenbau GmbH | - | 2019 | 3.40 × 1.30 × 1.40 m, part of the system Format parts | ALWID Maschinenbau GmbH | - | 2019 | 10x PP28x22 mm deep capping heads, 1x format set for 76 mm straight-neck bottle Accessories | 2 EURO pallets with format and head components   Dodoxqhvlepfx Ah Ujkw