Used destacking device for sale (71)

Year of construction: 2004, condition: used, Stacking platform for panel dividing saws Manufacturer: Holzma 2x Type: HAU A/B 25/8 2x Type: HAU A/B 25/12 Year of manufacture: 2004 Hfsdpfjzu Am Tox An Eep

Year of construction: 2013, condition: used, Angle transfer 180°, manufacturer Venjakob VEN TRANS Technical data:- Type. VEN TRANS - Manufacturer: Venjakob - Year of construction:2013 - Max. part length: 5.500mm (part length 6,000mm on request) - Infeed roller conveyor Length: 6100 mm Roller width: 1400 mm Roller diameter: 60 mm Pitch: 140 mm Infinitely variable feed rate - Cross transfer with carriage and lifting rake - Lifting-lowering, pneumatic - Length of transfer arms: 4600 mm - Number of rakes: 43 pieces - Distance between the rakes 140 mm - Outfeed roller conveyor Length: 6,100 mm Roller width: 1400 mm Roller diameter: 60 mm Pitch: 140 mm Feed infinitely variable - Connected loads: Hsdjzf N Iropfx An Eofp - Electrical: 400 V, 50 Hz, 3 phases - Location: At the warehouse in D-32825 Blomberg

Year of construction: 2005, condition: used, - max. 28 cycles/min for single stacks - max. 50 sheets/min when collecting sheets in the direction of travel, with several sheets arranged one behind the other - max. 50 sheets when collecting 2 sheets on top of each other (special version of the infeed belt conveyor) Used destacking unit Manufacturer: Meinert Type: AM 33 - 3000 /1300 Systems Year of manufacture: 2005 Technical data - max. 28 cycles/min for single stacks - max. 50 sheets/min when collecting sheets in the direction of travel, with several sheets arranged one behind the other - max. 50 sheets when collecting 2 sheets on top of each other (special version of the infeed belt conveyor) Design - Infeed belt conveyor in front of the system (special version: pneumatically adjustable for collecting 2 parts on top of each other) Hedszuz N Tepfx An Eefp - Infeed belt conveyor in the paternoster - 2 paternoster walls – fixed side and motor-adjustable loose side - Synchronized stop adjustment – infeed and stacking positions AM 33: 2 stacking positions on one lifting device with powered roller conveyor - Personnel protection consisting of safety grilles and automatic sliding gates - Control cabinet according to VDE regulations - PC control in a separate PC cabinet Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Year of construction: 1990, condition: excellent (used), I sell the turning device HOMAG TD31/25/13. Year 1990. One side feeding suitable for line. Element width 1250 + 1250mm Total length 6500mm Available immediately. Ready for work, possible to test. Hfsdpfx Ajktfvfon Eep With full manuals.

Condition: good (used), Year of construction: 1996, functionality: fully functional, Roller conveyor with rip saw and outfeed table motorized roller conveyor6m Hfedjuvdfmopfx An Ejp rip saw, pneumatic control, 400mm saw blade Outfeed roller conveyor with pneumatic side pushers, 10m Feed table 5 x 10m with cross conveyor

Year of construction: 2002, condition: used, machine/vehicle number: 001, Description Offered is an automated side board processing line with singulation, trimmer for end trimming, 2 stacking machines, additional discharge, and end trimming of stacking slats: Boards 2000-5280 mm long, 16 - 40 mm thick, 70 - 260 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at a joystick: - Boards are conveyed laterally using a 4-strand overhead chain cross conveyor - Singulation steep conveyor 6000 mm wide, 3000 mm inclined - Alignment roller conveyor - Chain cross conveyor as a layer former - Star turner and sorter before the trimmer Hfsdpjy Uzldefx An Eep Nlewsy Uzhfj D A Tmcob - Edge detection (ALFHA-Edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick assesses: without re-trimming, 5000 mm to stacking machine 1, alternatively: without re-trimming, 4000 mm to stacking machine 1 with re-trimming, 4000 mm to stacking machine 2 with re-trimming, 3000 mm to stacking machine 2 with re-trimming, short lengths for discharge into a box, with re-trimming, short lengths for discharge into a box with re-trimming, 2 or 3 x 101 cm for stacking slats, with re-trimming, 2 or 3 x 101 cm for stacking slats or waste cut - trimming length 505 mm for the underlying vibration channel - 2 stacking machines: 1 x 2500 to 5280 mm and 1 x 2000 to 4280 mm - automatic lowering of the finished packages and transfer to automatic strapping - FROMM strapping with 16 mm plastic band and automatic transfer to the discharge roller conveyor - ALFHA control with Siemens S 7 - ensures perfect operation. Performance records / daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers For example, one employee processed, packaged, and strapped approximately 15,000 boards of side lumber 4000/17 x 76 mm in 9 hours. The system is still assembled, but the upstream chipping plant has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without any problems. A video of the process can be shown via WhatsApp!

Year of construction: 2001, condition: excellent (used), I sell the Stacking / Destacking device HOMAG BARGSTEDT TBH22/D/25/12, year 2001. Stacking device one side feeding / also suitable for pallets. Catching head system with vacuum pads Vacuum-System (including pump) Automatic loading. Infeed table motorised roller-system Outfeed table with lifting mechanism motorised roller-system Outfeed table front roller-system Outfeed feeding station for stacked material Security fence system fully complete ! Working capacity apprx 8 tacts / min Available immediately. Ready for work, possible to test. Hedom Dqmaspfx An Ejfp With CE Certificate and full manuals.

Condition: used, Inclined lift Hedeq Edyrepfx An Eefp Lift to the first upper floor For transporting boards to one floor height.

Condition: excellent (used), Year of construction: 2001, I sell the Destacking device BIESSE RBO WINNER SC, year 2004. Destacking device one side feeding / also suitable for pallets. Hedpfx Anoxyah Sj Esfp Vacuum-System (including pump) Automatic loading. Infeed table motorised roller-system Outfeed tables motorised roller-system on the floor (2 channels) Security fence system fully complete ! Total power 24kW Year 2004. Available immediately. Ready for work.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Cabinet length: from 250 to 2500 mm Cabinet depth: from 250 to 700 mm Cabinet height: from 150 to 1400 mm Working height: 300 mm Pressing pressure (fixed): max. 15 kN Positioning speed (fixed): 25 mm/s Transport interface: no Control: via contactors/protection devices Hfjdpfozphrksx An Esp Weight: approx. 2.2 t

Condition: excellent (used), Year of construction: 2001, I sell the Stacking device BIESSE RBO MAGNUM, year 2001. Stacking device one side feeding / also suitable for pallets. Vacuum-System (including pump) Automatic loading. Hsdpfxexyag Ue An Eefp Infeed table motorised band-system Infeed tables motorised roller-system on the floor (2 channels) Outfeed table front Band-system Security fence system fully complete ! Total power 25kW Year 2001. Available immediately. Ready for work.

Condition: used, Conveyor belt for collecting finished parts – a transporter with a storage bin For sale: an industrial conveyor belt designed for the automatic collection of finished parts from production machines. The device collects parts directly from the machine and stores them in a bin. Once the bin is full, the operator uses a foot pedal to start the conveyor belt, which empties the accumulated material into a box or container. Features: * Conveyor belt for collecting finished parts * Large bin for storing finished parts * Foot pedal-controlled emptying * Electric drive with a gearmotor * Robust steel construction * Compatible with various production machines * Facilitates the collection, buffer storage, and packaging of finished parts Applications: wood industry, furniture industry, and other production lines requiring the collection and periodic emptying of finished parts. Condition: used. Dimensions: Height from the ground: approximately 120 cm Belt width: 39 cm Width at the loading side: 80 cm Height at the loading side: 100 cm. Hfjdps Agu E Hjfx An Eop

Year of construction: 2002, condition: used, Vacuum suction cup for panels Hfsdsynf Stjpfx An Esp 4 zones Maximum 400kg Transport support 220V

Year of construction: 1995, condition: ready for operation (used), For sell we have whole line. System TM Bison loading machine Weinig Hydromat H 22 B year 1989 Hjdpfxetqdfie An Eofp System TM Angus unloading 450 - 2500mm lenght 20 - 80 mm height 45 - 160 mm width

Condition: good (used), Year of construction: 1998, Stacking machine from pallet Hjdporc Drbofx An Ejfp

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, 1. BARGSTEDT TBP16/DG/30/22/S Portal Loading System Vacuum portal for raw sheet loading (fixed edge on the right) • Workpiece weight up to 100 kg • Performance up to 5 cycles/min • Pallet return + light curtain protection 2. BARGSTEDT TPP20/28/21/S Pallet Magazine Empty pallet supply for loading Hfjdpfezh Uziox An Ejp • Capacity approx. 12 pallets • Stacking height max. 1,800 mm

Condition: used, Board stacking system Hfedpfez Anp Nsx An Ejp Roller conveyor Cross chain conveyor Board hill Packer Pack elevator Designed for boards up to 6 m long

Condition: good (used), functionality: fully functional, automatic unloading from stand total length 4,5m arm length 100cm two columns total power 5kW Hodpfx Ansy N N R Rs Eofp

Year of construction: 1988, condition: repair required (used), mechanisation for planer infeed -For lengths up to ca. 13 m -Ideal unit for KVH (solid construction timber)and BSH (laminated beams) in front of the planer -1 operator Hedpjvbtpofx An Esfp -lateral destacking unit -separation -4 cross cut saws -cutting cross section 180x220 mm, 150x300 mm

Year of construction: 2026, condition: new, functionality: fully functional, Fully Automatic Board Sorting and Sawing System for Sawmills With its fully automatic board sorting and sawing system, JAC Automation & Robotics GmbH offers a powerful solution for significantly reducing manual operations in sawmills and wood processing companies. The system handles the entire process, from the unsorted raw material stack to the finished, sorted, and stacked boards. A reference system is already in successful operation at a sawmill. Your advantages • fully automatic and autonomous system operation • significant reduction in manual handling • relief from personnel shortages • fewer errors due to incorrect sorting • reproducible quality • automatic stacking • flexible allocation based on length and width • automatic defect detection • modular, expandable design In the current manual process, an employee may have to pick up and move a board up to four times. With the automated system, this handling is completely eliminated. Workpiece range • Length: approx. 1,700–5,200 mm • Width: approx. 95–310 mm Hedpfxjzz Sugs An Eofp • Thickness: approx. 30 mm • other dimensions available upon request Automatic process The raw boards are picked up by a KUKA robot and automatically fed to the measuring and sawing station. Length and width are determined using laser sensors. In addition, boards that are too severely warped can be detected and automatically sorted out. Each board can be sawn at both ends. Alternatively, a pure sorting operation without sawing is also possible. Sawdust and waste are automatically transported via a chute and a conveyor belt to a waste container located outside the system. Flexible sorting The reference system has: • 10 freely configurable sorting and stacking locations • 2 reject locations • 2 raw material locations The operator can freely define which length and width ranges are placed on which stacking location. The finished boards are stacked fully automatically. Optionally, intermediate strips can be inserted between the individual layers. Performance With a high variety of products, the reference system achieves approximately: • 4 boards per minute • up to approximately 240 boards per hour Technology • 2 × KUKA KR 120 R3900-K • 1 × KUKA linear unit • Siemens S7-1500 • Siemens F-CPU • 19" touch panel • WinCC Runtime • Production and piece count recording • Remote maintenance via Weidmüller router • Safety fence and Keyence light curtains Individually adaptable The system is newly manufactured and planned according to customer specifications. Layout, workpiece range, number of sorting locations, and the range of functions can be adapted. Optionally, an expansion with AI-based camera technology for detecting wood defects and quality characteristics is possible. Reference area: approx. 25 × 15 m JAC handles the complete project management, including design, manufacturing, programming, assembly, commissioning, and training. Delivery time: approx. 6-8 months after technical clarification and order release. Europe-wide delivery and commissioning are possible. Price on request.

Condition: like new (used), - machine in stock - after the technical review - very good condition - stacking wedge stacking in one cycle possible Hfjdpfofg Iqgox An Esp   TECHNICAL SPECIFICATIONS: elements length 3000 mm elements width 1300 mm element height 1600 mm element centering number of suction cups 20 pieces vacuum pump 1.1 kW lifting capacity 450 kg hydraulic lifting of material 1.5 kW pump motor 1.8 kW arm motor number of cycles 12 / min    number of pickup rollers 48 roll height from the ground 280 mm adjustable suction cup spacing maximum spacing of suction cups 3000 x 700 mm

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Gantry (Portal) machine, belonging to the line (SOFIT code: W05025) Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader Hodpfoyywi Ajx An Eofp N. 1 Out-side motorized rollers table (which out-feed the panels from the Unloader) Separate electric and command panel Electronic Programmer PLC MAGELIS Perimetral safety metal grids Working capacity (cycles/min) 15-18 (ca.) Min/Max panels thickness mm 10 - 60 (ca.) Min dimensions of the panels mm 210 x 230 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw

Condition: excellent (used), UNLOADER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Gantry (Portal) machine, belonging to the line (SOFIT code: W05025) Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) Hfodpfxoyywl Rs An Ejp N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arm with vacuum cups, adjustables N. 2 Out-side rollers way (on gound) to out-feed pile of panels from the Unloader N. 1 Out-side motorized rollers table (which brings panels to the Unloader) Separate electric and command panel Electronic Programmer PLC MAGELIS Perimetral safety metal grids Working capacity (cycles/min) 15-18 (ca.) Min/Max panels thickness mm 10 - 60 (ca.) Min dimensions of the panels mm 210 x 230 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw

Year of construction: 2026, condition: used, NEW Automatic loading and unloading station.Suitable for wood, MDF, solid wood, drywall, cement fiberboard, and boards. Examples: Doors, boards, MDF panels, cabinet fronts, drywall, and facade panels. Adaptations to other products are possible. The machine operates at a constant speed and with a set loading and unloading capacity. This allows you to easily automate your loading and unloading processes and increase process reliability. The system operates with a 2-circuit vacuum system. Siemens control panel Technical specifications: - Working width 1.300 mm. - Includes belt conveyor, length 3,400 mm - Working height 930 ± 20 mm - PLC control, operated via a touch panel, Siemens S7-1200 - 2-circuit vacuum system - Loading and unloading of parts via vacuum suction cups Hfodoy Iv N Rjpfx An Esp - Special suction cups with position adjustment - 4 additional suction cups to lift the panels 15 mm on one side before vertical movement. - Automatic signal upon completion of the loading process - Max. horizontal speed: 0.5 m/s - Horizontal working stroke: 1,300 mm - Max. vertical speed: 0.5 m/s - Stack height approx. 1,000 mm (including pallet under the plate stack) - Loading side on the left in the direction of travel - Vertical working stroke: approx. 1,200 mm - Max. lifting capacity: approx. 100 kg, continuous operation 85 kg - Max. component width: 1,300 mm - Max. component length: approx. 3,050 mm - Max. conveyor belt speed: infinitely variable up to max. 10 m/min. - Electric motor power: 1.5 kW - Electronic components: Schneider Electronics and Siemens - Weight: 1,500 kg YouTube link:

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Hjdpfxswbp Nwj An Eofp Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which out-feed the panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 80