Used Gluing presses for sale (106)

Condition: good (used), Year of construction: 2003, Automatic hydraulic gluing press Kallesoe Type LV 7821 press is used for gluing wooden elements, e.g. tabletops with maximum dimensions of 7800 mm x 2100 mm, the factor which accelerates gluing is warm water supplied to the press shelf and being in continuous circulation (it can be supplied from CO or heated by heaters mounted on the press) Heating power of the press 72kW Maximum capacity of the press up to 2000 m2 / 7.5h Dkebvdherqzgkoy Nol Glue applicator with feeder for Kallesoe press Type KL40 - used to automatically apply glue to each lamella and transfer directly to the press LV7821

Condition: excellent (used), Year of construction: 1998, Functionality: fully functional, Press 12m with glue device Dkobvdhov Acm Hsy Njl

Condition: excellent (used), Year of construction: 1999, Functionality: fully functional, Gluing Press Hildebrand 6.1m Year of Manufacture: 1999 Technical Condition: Very Good Dksbsv Nxflevdhy Nsl

Condition: good (used), Line for gluing layered floors / layered boards / veneers / Veneer / For sale due to company restructuring: Line for gluing, e.g. layered floors, backings for three-layer parquets and wooden boards, veneers, veneers, etc. Production capacity in single-shift operation is approximately 550-600 m². The line consists of the following elements: 1) Pneumatic feeder 2) Winter scissor table 2500x1300 mm 3) Omma brushing machine 1400 mm 4) IR lamp (Friz) 5) Omma PU glue applicator 1700 mm and Nordson melter. 6) Automatic Conveyor with Esse Due roller feeder 7) Calander rollers 1300 mm Dkobvdev Rrvmehy Nel 8) Italpresse 2500x1300 mm pass-through press 9) Italpresse belt conveyor 10) Winter 2500x1300 mm scissor table The line is still connected and can be tested on site. Everything is 100% functional.

Condition: good (used), Year of construction: 2006, Functionality: fully functional, Automatic hydraulic frame press Tiger Automat 3000 Manufacturer Tiger Italy Year of construction 2006 S/n 152330506 Hydraulic frame press Pressing range 300m / 2000 mm Dksbvdjra Rbnohy Nel manual and automatic cycle 0-4500ps 0-315 bar Hydraulic pump 1.5 kW 400 Volt, 50 Hz CE marked Weight:2500 kg

Condition: excellent (used), Self-loading press for gluing Orma LS ECO 35/13 AS-BO Gluing length 3500mm Gluing width 1300mm Automatic material loading Shelves heated with oil up to 120C Press pressure 90t 7 side material clamps Dksbovydlxevdhy Nsl Shelf piston diameter 70mm Total power 34kw CE certificate Year of production 2006

Year of construction: 2014, Condition: as good as new (ex-display), Pneumatic press for gluing Dkebvdhop Aubkey Njl TECHFA 2500 x 1300 The machine is in perfect condition, like new. Working dimensions 2500 x 1300 mm

Condition: new, Year of construction: 2022, Functionality: fully functional, The kit includes a press for compressing beams, an adhesive applicator and a testing press ask for more details. Dobvdovnma Iohy Njkl

Condition: excellent (used), Year of construction: 1999, Functionality: fully functional, Gluing Press Hildebrand 6.1m Dkebvdhyev Nxdzo Nel Year of Manufacture: 1999 Technical Condition: Very Good

Condition: good (used), Year of construction: 1998, Ramarch gluing press Type: Block 84 Year of construction: 1998 Press length: 4,000 mm Press height: 1,650 mm Debvdhov Ay Smoy Nokl Press thickness: 80 mm 8 vertical hydraulic press cylinders 8 horizontal pneumatic press cylinders

Year of construction: 2010, Condition: excellent (used), Manual hydraulic press Max material dimensions 2200x1380x120mm Dkjbjh Hqadovdhy Nel 6 hydraulic cylinders

Condition: refurbished (used), Year of construction: 1986, Functionality: fully functional, machine/vehicle number: 908086, feed length X-axis: 3,000 mm, feed length Y-axis: 1,600 mm, feed length Z-axis: 140 mm, total width: 50,000 mm, total length: 40,000 mm, total height: 28,000 mm, overall weight: 12,000 kg, working length: 3,000 mm, working width: 1,600 mm, pressing force: 22 t, type of input current: AC, power: 18 kW (24.47 HP), INFEED PRESS 3000X1600 ITALPRESSE Debeqnufrjvdhy Nekl WEIGHT 12 TONS It has thermal oil electric heaters for both plates. Both plates are cast iron with cross drilled holes. Massive and robust. Maximum temperature is up to 200 degrees. Pressure of the plates is up to 100N/cm

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, total width: 300 mm, total length: 8,000 mm, total height: 1,600 mm, type of input current: three-phase, power: 15 kW (20.39 HP), temperature: 21 °C, Technical Details Pressure up to 14,5t/m (at 120 BAR); Flexible size from 6 to 14m with (2m step); Currently press is 8 M possible to purchase additional 6 m from producer. 15kW hydraulic station. Work Material: Max height: 1600mm; Max width: 300mm; Length: from 6 to 14m. Currently 8 M Additionally to press comes. Infeed / outfeed conveyor for feeding the press; Outfeed buffer table for rapid assembly restart; PU glue spreader; Dksbvdjvitlgjhy Nol Roller tables for feeding the glue spreader. All system works 100% it was purchased to start new business, which did not work out.. New price for all system was 130 000 Eur Location - Latvia - Still assembled and possible to test.

Condition: ready for operation (used), A line for joining boards by length, consisting of: a saw for cutting out defects in boards marked with chalk, a micro-joint milling machine for boards with a maximum width of 23 cm, thicknesses from 1 cm to 12 cm, a press for joining, a saw for forming lengths. Total length of the line about 40 m. Djbvsv Hhi Uodhy Nekl The machine is functional and ready to work. Possibility of dismantling and loading onto a truck.

Condition: excellent (used), Year of construction: 1999, Functionality: fully functional, Gluing Press Hildebrand 6.1m Year of Manufacture: 1999 Technical Condition: Very Good Dobvdhysv Nxduj Nskl

Condition: excellent (used), Gluing stand/gluing press Pneumatic Dimensions: 3100 upper heating element, width 2300 mm, depth 550, height 1850 Dkjbetu Iixjvdhy Njl

Condition: excellent (used), Self-loading press for gluing Orma Macchine Debvdhyjvq Rcxo Nskl Working length 2500mm Working width 1200mm Automatic material loading Side material clamps

Condition: good (used), Year of construction: 1999, The maximum working area is 3000 x 1600mm Debvdhyeg Np Rae Njkl Minimum working area 390 x 420mm 2.2kW engine Weight 1500 kg

Condition: new, Year of construction: 2024, working length: 5,000 mm, working width: 1,200 mm, material thickness: 70 mm, power: 1.1 kW (1.50 HP), Rotary press for width gluing 6 floors, maximum gluing dimension 5000 x 1200 x 90 mm or by order Dksbvdhslih Scsy Nel

Condition: new, Frame press with rack and pinion drive and a quick stroke of 140 mm Sturdy base frame made of thick-walled hollow profiles and galvanized pressing units with 50 mm precision hole pattern. Bolted base frame, Angular accuracy is guaranteed by a cross screw connection, the press units have The press units have a ball bearing guide. Universally applicable as a frame press, panel and carcass presses etc. The pressure element is a rack and pinion gearbox with a fast stroke of 140 mm and a pressure of 1 ton Basic equipment: 3 press units with rack and pinion gearbox 90 degree stop Clamping dimensions H x W 1600 x 2900 mm - with frame 1600 x 2600 mm Installation dimensions L x W 3050 x 750 mm - height without chassis 2120 mm Price: 2.300,00 Dksbevcbctovdhy Nsl equipped with: 1 pressing unit with 1 rack and pinion gearbox : 650,00 Euro 1 side pressure unit with 2 rack and pinion gears : 950,00 Euro 1 downholder 250,00 Euro

Condition: excellent (used), Year of construction: 2022, High frequency panel Press Orma Model LS ECO 25/13 Year of production: 2022 Technical condition: very good Manufacturer: Orma Macchine – Italy Work Table and Feed System: • Work dimensions: 2500x1300 mm, 3.25 m² • Mechanical pusher: length 2500 mm, used for advancing pieces into the press; fixed pushing speed; pushing bars operated by a chain system • Limit switch for stopping the press at the end of the work table • 1 foot pedal for moving pieces on the work table • 1 emergency stop button _____ Hydraulic Press Model LS/ECO: • High-frequency platens, dimensions: 2500x1300 mm • Mobile lower platen • Vertical pressing system: o 4 vertical pressing pistons with a diameter of 70 mm, maximum total force of 40 tons, stroke/opening: 150 mm • Horizontal pressing unit: o Consists of 5 double-acting pistons with a diameter of 40/25 mm that operate 5 steel pressing plates; stroke/opening: 150 mm o Maximum total force: 7.5 tons o Pistons can be activated via a special device to reduce the pressing area • Rear vertical pressing unit: o Used to fix the last pieces and contrast the lateral horizontal pressing unit, consisting of a steel bar (2500x150 mm) o Actuated by 3 vertical pistons with a 70 mm diameter, total maximum force: 30 tons, stroke: 150 mm • Side pressing unit and rear clamping device: o Allows the production of pieces with unlimited length • Two working cycles: o Manual or automatic, selected by pressing a button o Special cycle for adjusting after pressing • Independent pressing units: o Each of the three hydraulic units has an independent pressure setting • Single hydraulic circuit: o Uses the same oil reservoir o Total power: 5 HP • Main control panel equipped with all command options (PLC included) for press operation • Press structure made of welded steel bars and profiles _____ Evacuation System: • Working dimensions: 2500x1300 mm • Mounted at the rear of the press on the mobile pressing unit • Gravity unloading system with triangular profile elements _____ INCLUDED: a. High-Frequency Generator Djbsv Ayftevdhy Njkl • 20 kW high-frequency generator • Adjustable to five frequency positions, allowing the generator to be used based on the type of operation • Silicon diode bridge for constant efficiency • Fully equipped with all components for connection to the press • Press platens made of insulating materials, covered with aluminum plates to allow high-frequency transmission o Aluminum coating functions as positive and negative poles (upper and lower platen) b. Stainless steel platen coating c. Height adjustment for side steel pressing plates d. Additional thickness for the side pressing plates We offer professional dismantling, loading, installation, commissioning, and training on machine operation. We also provide ongoing maintenance services and access to spare parts.

Condition: ready for operation (used), Year of construction: 1987, Functionality: fully functional, machine/vehicle number: P 0981000432100, Strong hydraulic press used for gluing block wood and door or window frames after service all functions are functional can work in manual and automatic mode. Dobvdovzbcwjhy Nokl

Condition: used, pressing surface: approx. 2,800 x 1,000 mm press cylinder: 6 Djbvdhyeviwqmj Nokl

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, Weinig Dimter ProfiPress 2500 3HF LZ Year of production: 2009 Technical condition: very good Weinig Dimter ProfiPress 2500 3HF LZ is a high frequency wood gluing press designed for the production of laminated panels and high-strength wooden components. The machine is engineered for efficient and precise length and width bonding using high-frequency (HF) technology. Key Features and Benefits: ✅ High-Frequency (HF) Technology – ensures rapid glue curing, reducing pressing time and increasing production efficiency. ✅ Robust Construction – made from high-quality components, ensuring durability and reliability. ✅ Automated Process – can be integrated into production lines for optimized workflow and enhanced efficiency. ✅ Precise Pressure Adjustment – guarantees uniform quality of the finished product. ✅ Versatility – ideal for manufacturing laminated panels, structural beams, stair treads, countertops, and other wooden elements. Technical Specifications: • Maximum Pressing Length: 2500 mm • Pressing Technology: High-Frequency (HF) • Number of Pressure Sections: 3HF (three high-frequency sections) • Pressure System: Hydraulic with precise pressure control • Application: Wide and long gluing • Glue Type: Hot-melt adhesives (e.g., PVAc, PU) compatible with HF technology • Control Options: User-friendly interface and automated gluing cycle programming • Energy Consumption: Efficient power usage for intensive production • Safety System: Sensors and protective covers compliant with CE standards Dimensions of Processed Wood: • Wood width, uniform widths for filling: 30 - 150 mm, usually 120 mm • Wood thickness: 7 - 45 mm, usually 24 mm • Wood length (min./max.): 200 - 2400 mm, usually 1250 mm When using certain additional devices, the minimum wood length must be adjusted accordingly, or a guide system must be used. Specific Pressing Pressure: 18 - 160 kN Type of Wood: Softwood / Hardwood Air Supply Data: • R1" / 1/2" - height approx. 600 mm - oil-free • Airflow: approx. 500 Nl/min (press / glue application) • Dust extraction: approx. 8 bar (extraction system) Electrical Connection Data: • (1) Press, mechanism → 14 kW • (1) High-Frequency Generator (HF) → 42 kW • Power supply voltage: 400V / 50Hz Dsbvdhyevyu Iqo Nekl • Weight of the press: 7000 kg (position 5) • Cable channel 300 x 150 mm, recessed in the floor or flush-mounted, with a control cabinet integrated into the machine structure. Foundation: • Concrete slab covering the entire delivery area, minimum thickness 200 mm, compacted and reinforced from both top and bottom. • Static load of the press → see the diagram on the left. • Maximum static load per foot: approx. 150 N/cm² • Any foundation recesses, elevations, or reinforcements must be provided by the customer. • This also applies to platforms, stairs, walkways, and supply lines for pneumatics, electricity, and telephone systems. Working height (AH): 940 mm Weinig Dimter ProfiPress 2500 3HF LZ is a professional solution for manufacturing plants looking for an efficient and precise wood gluing machine. Thanks to HF technology, it significantly reduces the production cycle time while improving the quality of finished products. We also offer professional disassembly, installation, commissioning, employee training on machine operation, and service support.

Condition: used, Technical data on request Dkebvju U Ezfedhy Nel