LA Tools & Service

Condition: excellent (used), functionality: fully functional, X axis travel (longitudinal axis): 4300 mm Y axis travel (transversal axis): 270 mm Z axis travel (vertical axis): 300 mm Electrospindle 1 HSD – max 18,000 rpm – power 5.5 kW Tool magazine capacity: 4 Angular head for lateral operations Number of clamps: 4 Isdpsy Drzhofx Abgjia Automatic clamp positioning Weight: 1950 kg

Year of construction: 2008, condition: excellent (used), functionality: fully functional, Number of controlled axes: 5 X-axis travel (longitudinal): 10,350 mm Y-axis travel (transversal): 800 mm Iiodpfxjy A S Dae Abgja Z-axis travel (vertical): 525 mm B-axis rotation (vertical-horizontal): from 0° to 90°, continuous C-axis rotation (perpendicular to the worktable): from 0° to 360° Electrospindle power at 24,000 rpm: 7 kW Independent working zones: 2 Tool holder taper: HSK-E 40 Tool magazine capacity: 9+1 Maximum diameter/thickness of disc cutter: 300 / 5 mm Automatic vice positioning

Condition: excellent (used), functionality: fully functional, Working dimensions mm 290×185 Vertical stroke mm 200 Table rotation 0-90° Vice capacity mm 170×135 Spindle speed rpm 2800-12000 Power kW 1.1 Iijdpfoy Awkljx Abgea Voltage V 230-400 ±5% Pressure bar 7

Year of construction: 2014, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1400040685, Special Features: Retrofit to WIN10 – NEW – with 6 months warranty on computer and UPS Water-cooled spindle, 9.5 kW S1 3-layer machining possible Carefully cleaned and overhauled – excellent condition Description: Graphical operator guidance and graphical service support A-axis for stepless machining from above – swivel angle 180° HSC milling spindle for speeds up to 24,000 rpm Large machining width Standard with clamping detection and automatic clamp positioning 8 tool stations Complete profile machining with stationary profile bar Rapid basic positioning of the machining unit (up to 64 m/min) on the X axis Robust, low-wear direct drive Protective hood Digital axis controllers for all 4 axes with high-resolution measuring system 4-axis industrial PC control 2 1/2 D interpolation 15" TFT color screen Network connection RJ45 10/100 MBit Hard disk Full PC keyboard Remote maintenance via TCP/IP (requirement: internet access) Technical Specifications: Max. machining length without frontal machining: 7,600 mm Max. machining length with frontal machining: 7,500 mm (tool-dependent) Travel X-axis: 7,700 mm Travel speed X-axis: 65 m/min Travel Y-axis: 850 mm Travel speed Y-axis: 60 m/min Travel Z-axis: 650 mm Travel speed Z-axis: 60 m/min Swivel angle A-axis, freely programmable in 0.1° increments: 0 - 180° Positioning accuracy: X-axis: +/- 0.1 mm / 1 m Y-axis: +/- 0.1 mm Z-axis: +/- 0.1 mm A-axis: +/- 0.1° Max. spindle speed: 24,000 rpm Max. spindle power: 9.5 kW S1 Tool holder: HSK F 63 Max. cutter diameter: 80 mm Max. milling cutter diameter: 200 mm Compressed air connection: > 7 bar Voltage: 400 V, 3 PH, 50 Hz Fuse: 35 A 8 tool stations Included Accessories: Tool setting gauge 8 pneumatic material clamps Automatic clamp detection Dosing spray device Protective hood Front light barrier Side safety fences (left and right) Central chip extraction 2 pneumatic material stops 3-circuit clamping system Length measurement for profile bar Barcode scanner with wireless transmission Special version with light barrier Additional options available on request: Programming software (office) eluCad, incl. hotline contract for 6 months 3D import license for one machine of category "L" Data import license package for one machine of category "L" CSV import license for one machine of category "L" Macro hashing license for one machine of category "L" Iodpfx Abey Ah Tksgsia Other information: The machine is delivered ready for transport, including transport locks, loaded onto truck Additionally, we optionally offer the following services on request: Installation and commissioning Machine training 4/5-axis training package for machine and eluCad

Condition: new, Year of construction: 2026, Cost-effective four-axis profile machining center (X, Y, Z + I - rotary table axis) for automatic three-sided machining of profiles made from aluminum, non-ferrous metals, plastics, and steel up to 3 mm wall thickness – brand new. CNC control system based on Windows® with 3D color graphics and simultaneous machining capabilities. Maximum machining length: 3,000 mm Maximum clampable profile length: 3,700 mm Machining of longer profiles possible Maximum profile cross-section: 200 x 180 mm Milling spindle drive power: 4.5 kW (optional 8 kW) Iisdpfoy Afxdsx Abgsa Tool holder: SK30 (optional HSK40 / HSK63) Milling spindle speed: 120 to 24,000 rpm Space requirements including mobile control panel and rear safety fence: approx. 5.5 m x 3.1 m x H 2 m Weight: approx. 1,500 kg - Covered tool magazine for six tools - Automatic tool length measurement - Automatic front door - Rear workspace safety with protective fence and access door - 6 pneumatic clamping bridges - 2 longitudinal stops (left and right) - CNC control system based on Windows® with 3D color graphics and simultaneous machining

Year of construction: 2003, condition: used, 4 controlled axes for profile machining Travel path X-axis: 7,200 mm Rotation A-axis: 0°-180° Speed range: 0-18,000 RPM. Tool changer with 8 positions on the machine plus additional tool changer in the bed Iiodpfeyz T Iqjx Abgoa Automatic belt tensioner displacement Profile editing Generation X, with Schüco CAM software and controllable about SchüCal+ - calculation program Operating hours: Machine on: 15605 h / NC on: 3691 h. Accessories / Equipment: Standard tool set (used) 5.5 kW spindle (New spindle inverter) (New PC / Control) The machine is overhauled, calibrated and immediately available for delivery. Weight: approx. 5,000 kg

Year of construction: 1995, condition: good (used), machine/vehicle number: 8883, Offer 26051 Technical Specifications: - Feed of the milling unit manual - Worktable height adjustable via handwheel - Horizontal and vertical material clamping - Cutter diameter up to 300 mm - Max. milling height 150 mm - Max. milling depth 110 mm - Max. milling length 500 mm - Angle-adjustable stop left & right 20° - 90° - Spindle speed 2800 rpm - Drive 400 V 2.2 kW - Compressed air connection 6 - 8 bar - Air consumption per cycle 10 l - Pneumatic profile clamping - Spray device - Space requirement approx. W 1300 x H 1450 x D 1100 mm - Weight approx. 300 kg Iiodpeyz S Trjfx Abgja

Year of construction: 2002, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 1300030418, For sale: CNC machining center for aluminum and steel profiles, Elumatec SBZ 130. The machine is company-owned and located in an indoor production facility, protected from external influences. Specifications and condition: Year of manufacture: 2002. Iedpfx Aeyz Dvrsbgeia Status: Currently not operational (requires pneumatic system servicing). History: The machine was in active use until 2014, after which it was stored indoors. Electronics: The computer is fully functional, the machine can be started for system testing. Required investment: Replacement of all pneumatic hoses and inspection/servicing of control blocks. Advantages: The machine is mechanically sound and has not been kept outdoors. Ideal opportunity for companies with technical capacity for overhaul or those seeking a reliable base for modernization.

Year of construction: 2019, condition: like new (used), functionality: fully functional, PRESSTA CYKLON D double-head automatic screwing machine with all accessories for sale. Iisdpfx Absyziu Togsa Package deal: if purchased together with the WM740 welding line and SMC350 machining center, which are also listed in our ads, the price is EUR 180,000.

Year of construction: 1995, condition: used, Cutter diameter 250 mm Pneumatic workpiece clamps Manual feed Weight: approx. 160 kg Iijdpfx Ajyzhu Eebgsa

Condition: used, functionality: fully functional, Lot of 3 copy routers Elumatec KF78/23. 2 units are fully operational (100%). The third is 50% operational, but can easily be refurbished or used for spare parts. Various spare parts included. Horizontal processing area: With stop: 300 x 100 mm With template: 270 x 70 mm Vertical processing area: Iodpfeyzfl Iox Abgoia With stop: 290 x 100 mm With template: 230 x 70 mm 12,000 rpm Clamping range: 150 x 150 mm Supply voltage: 230/400V, 3-phase Price is for the lot of 3 machines, without feed tables.

Condition: excellent (used), Year of construction: 2008, Machining center with 3 CNC-controlled axes for processing profile bars or parts made of aluminum, PVC, non-ferrous metals, and steel up to 3 mm. The machine is equipped with an 8-position tool changer, allowing the integration of 2 angle heads and a disc cutter for 5-sided machining of the workpiece. Additionally, the machine features a movable worktable that facilitates loading and unloading, and increases the maximum processable profile cross-section relative to profile width. All CNC axes are absolute axes, eliminating the need for re-zeroing when restarting the machine. Clamping elements are automatically positioned by the X-axis, taking collision zones into account. The machine comes with the following accessories: Isdpjyzcnyofx Abgeia - CamPlus software - 8 tool changer positions - Second material stop for multiple setups or processing of overlength workpieces - MG Pilot hand control unit - Angle head - Tools - Barcode scanner The machine is in excellent condition and has only 3,467 operating hours! Installation, commissioning, and training can gladly be provided by us!

Year of construction: 2019, condition: excellent (used), functionality: fully functional, CNC machining center with 4 controlled axes and automatic spindle rotation (0-180°). This enables the machine to reach all 3 profile sides of the workpiece without manual repositioning. The machine is equipped with a water-cooled spindle capable of 20,000 rpm. It is suitable for machining profile bars or parts made of aluminum, PVC, light metal alloys, and steel up to 2 mm. Features a manual tool magazine with 9 slots and an automatic tool magazine with 4 slots on the left side of the enclosure. Additionally, it has a second automatic tool magazine with 4 slots on the right side of the enclosure. The profile is positioned by a pneumatically operated stop on the left, and secured by 4 robust clamps that are positioned and monitored automatically. With a second pneumatic stop on the right-hand side, processing of long bars—twice the machining length (overlength machining)—is possible. A movable clamping area also simplifies loading and unloading of workpieces and considerably increases the maximum workable cross-section. The machine comes with the following special equipment: - CamPlus software - Shape software for creating custom machining operations and for importing machining drawings/contours - An additional tool magazine Iodpfx Abjyzb Ekjgeia - A second stop - A safety enclosure (fully enclosed) Setup, commissioning, and operator training can also be provided by us!

Condition: used, Emmegi machining centre for aluminium. Functional. Iedpeyy Ilnsfx Abgsia

Condition: good (used), Year of construction: 2008, machine/vehicle number: 3486579, Offer 26048 Single-spindle Copy Milling Machine for 3-Sided Processing Technical Data: Iisdpfx Asyymgkebgea - 3-sided machining in a single clamping for lock and euro-profile cylinder (PZ) cutouts, - e.g. milling in aluminium / plastic / steel profiles - Operated via two-hand lever - Material clamping by pneumatic clamping cylinder - Manual profile bar rotation device for 3-sided processing - Working range - x (crosswise) 250 mm - - y (longitudinal) 90 mm (depending on position) - - z (vertical) 120 mm (depending on position) - Max. profile height, depending on position: approx. 120 mm - Max. profile depth: 100 mm - Spindle speed: approx. 6,000 + 12,000 rpm - Pneumatic connection: 8 bar - Drive: 400 V / 1.5 kW - Required space: approx. W 650 x H 1550 x D 850 mm - Weight: approx. 340 kg

Year of construction: 1997, condition: excellent (used), functionality: fully functional, - Maximum cutter diameter: 280 mm - Cutter bore: 40 mm - Manual feed - Maximum profile height: 200 mm Milling area: - Length: 400 mm - Depth: 110 mm - Height: up to 150 mm - Power: 2.5 kW at 400 V/50 Hz - Milling spindle speed: 2,800 rpm - Compressed air connection: 7 bar Iijdpeyyma Rofx Abgja - Air consumption: 10 l per work cycle, 20 l with minimum quantity lubrication - Dimensions (L x W x H): 1,540 mm x 905 mm x 1,200 mm, weight: 248 kg

Condition: good (used), Year of construction: 2000, functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 400 V, rotational speed (max.): 12,000 rpm, We are offering this well-maintained ROTOX KF 347 copy milling machine, year of manufacture 2000. Iiedpfxeyxy Nco Abgoa Manufacturer: ROTOX Model: KF 347 Year of manufacture: 2000 If you have any questions or require further information, please feel free to send us a message or give us a call.

Year of construction: 2007, condition: good (used), functionality: fully functional, EMMEGI PHANTOMATIC T4 STAR Iisdpeyxtbrefx Abgsa

Year of construction: 2018, condition: good (used), functionality: fully functional, 4-axis machining center PERTICI P104 Iiedpfxoyxtbls Abgsa

Year of construction: 1994, condition: excellent (used), functionality: fully functional, Horizontal cutting ranges: With stop: 300 × 100 mm With template: 270 × 70 mm Travel: 80 mm Iedpfx Abeyxnx Sjgoia Vertical cutting ranges: With stop: 290 × 100 mm With template: 230 × 70 mm Travel: 120 mm

Year of construction: 1999, condition: used, Cutter diameter 250 mm Pneumatic workpiece clamps Manual feed Weight: approx. 160 kg Isdpfx Aboywx D Nogsia

Year of construction: 1998, condition: used, 3-sided machining in one setting Speed: 12,000 revolutions per minute 2 pneumatic tracers at the bottom, 1 tracer at the top Pneumatic material clamping Minimum quantity spray device Milling area vertical (top): 330 x 130 mm Milling area horizontally (from the front or rear): 220 x 95 mm Stroke: 110mm With side stops Isdpfxeywxywo Abgoia Weight: about 350 kg

Condition: used, Year of manufacture: 2011 Automatic cleaning machine for PVC profile corners, equipped with lateral support arms. Iiodpfx Aboywu A Isgsa automatic cycle upper/lower units for corner cleaning Machine in working condition, regularly maintained, complete with manual.

Year of construction: 2012, operating hours: 3,496 h, condition: excellent (used), functionality: fully functional, Quadra L1 in excellent condition with extremely low operating hours for sale. Ijdpfjywpcvox Abgoia Available with enclosure upon request! On-site demonstration with profile possible. Quadra L1 pass-through machining center with premium configuration: - 6 spindles, 360° rotatable to machine profiles at any angle - 7.5 meter bar loading magazine - 600mm saw and notching unit - Profile positioning system - MG Pilot handheld controller - 2 steel front conveyors for scrap removal - Slice software - CamPlus / Job software Installation, commissioning, and training can also be provided by us! CNC 12-axis machining center, designed for milling, drilling, and cutting operations on aluminum and light alloys. The QUADRA L1 consists of an automatic tool magazine and a pusher feed system for profiles up to 7500 mm, complete with profile clamping gripper. As the collet moves, the feeder returns to its starting position, allowing the loader to prepare the next profile simultaneously. The central section houses the milling and cutting modules. The CNC 4-axis milling module is equipped with 4 to 6 electrospindles, enabling complete contour machining of the workpiece in any orientation. The CNC 3-axis cutting module features a Ø 600 mm blade with a plunging movement. The QUADRA L1 also includes an automatic outfeed system from the cutting unit to the unloading magazine. The system is equipped with a magazine with cross belts for unloading finished workpieces up to 4000 mm (7500 mm optional). The machining unit can be fitted with an optionally available enclosure, providing sound insulation for the central operational area, which not only protects the operator but also reduces noise emissions. Machine demonstration available!

Year of construction: 2022, condition: excellent (used), functionality: fully functional, machine/vehicle number: 122000029, We are offering this very well-maintained elumatec SBZ 122/75 profile machining centre, year of manufacture 2022. Type: 122/75 Serial number: 122000029 Year of manufacture: 2022 Voltage: 400 V Frequency: 50/60 Hz Power: 17.5 kW Current consumption: 25 A Maximum motor current: 20 A Short-circuit withstand strength (Ik/SCCR): 5 kA Compressed air pressure: 7 bar Iiedpoywku Tsfx Abgoa Weight: 3,800 kg Maximum profile diameter: 180 mm Spindle speed: 6,000 rpm Maximum speed: 20,000 rpm If you have any questions or require further information, please feel free to send us a message or give us a call.