Amikon GmbH

Condition: excellent (used), Vötsch Type: VC 7018 Vötsch Climatic Test Chamber VC 7018 Air-Cooled Touch Panel Control Unit On the touch panel control unit, all control and operating commands can be triggered by simply touching the function symbols. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Ports The test chamber is equipped with port holes on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Feedthrough included in standard equipment R1: NW 125 mm L1: NW 50 mm Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Characteristics for temperature tests: Temperature range: -70°C to +180°C Temperature ±0.1 to ±0.5 K Spatial ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Characteristics for climatic tests: Temperature range: -10°C to +95°C Humidity range: 10% to 98% r.h. F. Temperature deviation over time in the center of the usable space ± 0.1 to ± 0.3 K Lhelhcewd Iizecqqef Temperature deviation over space ± 0.5 to ± 1.0 K Temperature gradient 1 to 2 K Humidity deviation over time in the center of the usable space ± 1 to ± 3 %RH Electrical connection: Nominal voltage: 3/N/PE AC 400V ±10 50Hz Nominal power: 4.1 kW Nominal current: 14.0 A Connection cable: 3.5 m Fuse protection: 16 A slow-blow, provided by the customer Refrigerants: R-404A and R-23 Test chamber capacity: approx. 190 liters Weight: approx. 460 kg net For your safety, the following information is provided as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch Type: VT 4034 Vötsch Temperature Cabinet VT 4034 Air-Cooled Refrigerant: Converted to R-452 A Internal dimensions: Height 750 mm, Depth 765 mm, Width 580 mm External dimensions: Height 1780 mm, Depth 1595 mm, Width 865 mm Temperature range: -40°C to +180°C Temperature deviation: Lhelhcowd Hpaocqqof temporal ± 0.1 to ± 0.5 K spatial ± 0.5 to ± 2.0 K Heating 3.2 K/min Cooling 3.5 K/min Maximum load (evenly distributed across the surface) of the test chamber floor: 60 kg per insert: 30 kg Total load of the grate supports: 80 kg Test chamber lighting: 24 V halogen bulb 50W Rated voltage: 3/N/PE AC 400V ± 10% 50 Hz Rated power: 4.1 kW Rated current: 12.5 A Fuse provided by the customer: 16 A slow-blow Refrigerant: R-452A Weight: 490 kg / 335 liters For your safety, the following information! The following steps are carried out on our chambers in advance: 1. Functional test and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Optical Control Model: OC-SCAN CCX.3 The OC-SCAN CCX.3 is a non-contact component counter specifically designed for SMD production. It uses X-ray technology to count electronic components such as SMD reels, matrix trays, cut tape, and sticks with an accuracy of over 99.9%. Key Features: Automatic component detection: The machine detects and counts unknown components without prior programming. Quad-Count Mode: Allows simultaneous counting of four reels in just 20 seconds. Drypack Support: Takes into account the interference caused by dry packs and counts only the components. Order Counting: Counts components precisely according to the customer order. Integration with ERP systems: Compatible with systems such as SAP or ASM SiMM for seamless inventory management. Ljlowdwvkohccqqshf 2D Inspection: Enables the inspection of printed circuit boards and electronic components. ​ ​Technical specifications Counting accuracy: >99.9% Counting time:

Condition: excellent (used), Model: TCS-INC/Tahoe-024-001 The TAHOE system is a high-performance burn-in test system for testing high-performance semiconductor components. It is suitable for both high-power and low-power applications (digital and mixed-signal) and supports component power dissipation of up to 100 watts. Temperature Chamber: 24 slots in a common temperature zone. Temperature range: 25°C to 170°C. Each slot has individual active socket control. Chamber heat dissipation capacity: up to 12.5 kW. Power & I/O: Each slot (BIB – Burn-In Board) has: 12 power supplies with up to 54 A. 4 power supplies with up to 12 A. 160 bidirectional I/O channels. 4 analog channels and 2 LVDS channels. Measurement of voltage and current at the DUT (Device Under Test) as well as monitoring of DUT outputs ("Signs of Life"). Drivers and Monitoring: Each slot has its own driver board (1:1 configuration). Driver boards are hot-swappable. Support for dynamic stimuli and DUT monitoring via Sierra™ software. System Configurations: High Power (HP): Up to 100W power loss per DUT. Integrated cooling with refrigerant. Low Power (LP): Up to 20W power loss per DUT. Cooling with the chamber's ambient air. System Features: Windows 7, 64-bit operating system Computer-based system with network functionality System event logging System temperature logging Lot/batch history logging The INCAL Tahoe HP Burn-in System is a fully automated burn-in chamber with control and monitoring functions. It is designed to continuously respond to system errors. The DUTs are controlled via power supply and test vectors. The system uses a configuration file to control all DUT test parameters, as well as to track project/lot numbers. It also links the serial numbers of the burn-in boards (BIBs) to information on DUT positions, defective or empty sockets, and calibration data. All anomalies and batch information, as well as special monitoring data, are stored and accessible via the main user interface. File information can be saved or loaded by the user. The system is especially designed for network use, to centrally store and access test data for current projects. The software configures the hardware parameters based on the installed equipment. A multi-level security system prevents unauthorized users from changing configurations or shutting down the system. Technical specifications: 12 programmable high-current power supplies (54A HP, 25A LP) 4 programmable low-current power supplies (max. 12A) 2 externally programmable bulk power supplies (max. 9A) Lheljwdvwajhccqqef Installation and operating data: Housing: Width 1350 mm, Depth 1330 mm, Height 2300 mm + 350 mm for the signal light Electrical requirements: Voltage: 400V / 3PH / 50HZ Minimum current: 30 amps Maximum fuse: 40 amps Heating capacity: 15.0 KW Temperature range: 25°C to 175°C Refrigerant system: R-404A Condition: used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) Further questions can be answered by contacting us. We will be happy to answer your questions over the phone.

Condition: excellent (used), Keyence Model: VR-5200 Type: Measuring Head Light Sources Viewing Light Source: LED Ring Light (red, blue, green) Measurement Light Source: White LED Control Unit: VR-5000 Viewing and Measurement Range Macro Mode Magnification (based on a 15-inch monitor) 12×: Horizontal 24.0 mm Vertical 18.0 mm Magnification (based on a 15-inch monitor) 25×: Horizontal 12.0 mm Vertical 9.0 mm Magnification (based on a 15-inch monitor) 38× Horizontal 8.0 mm Vertical 6.0 mm Magnification (based on a 15-inch monitor) 50× Horizontal 6.0 mm Vertical 4.5 mm Micro Mode Magnification (based on a 15-inch monitor) 40× Horizontal 7.6 mm Vertical 5.7 mm Magnification (based on a 15-inch monitor) 80× Horizontal 3.8 mm Vertical 2.9 mm Magnification (based on a 15-inch monitor) 120× Horizontal 2.5 mm Vertical 1.9 mm Magnification (based on a 15-inch monitor) 160× Horizontal 1.9 mm Vertical 1.4 mm Zoom 1× to 4× Height Measurement Measurement Resolution 0.1 µm Height Measurement Range Without Z-Compositing Macro Mode: 10 mm Micro Mode: 1 mm With Z-Compositing Macro Mode: 50 mm Micro Mode: 30 mm Repeatability (σ) Without image stitching in Z 0.4 µm With image stitching in Z 1.0 µm Measurement accuracy Lslhccowc Sxdoqqehf Without image stitching in Z ±2.5 µm With image stitching in Z ±4.0 µm Width measurement Repeatability (σ) Macro mode: 1 µm Micro mode: 0.5 µm Measurement accuracy Macro mode: ±5 µm Micro mode: ±2 µm Image stitching Fully automatic measurement (automatic XY control + automatic Z focus), Automatic assignment, automatic area setup Measurable XY area 206 x 104 mm Stage XY travel 184 × 88 mm (motorized) Z travel 73 mm (motorized) Load capacity 4.5 kg Working distance 75 mm Image pickup element 4-megapixel CMOS, B/W Transmitter lens Dual telecentric lens x 2 Receiver lens Dual telecentric lens Data processing Dedicated PC according to KEYENCE specifications (Operating system: Windows 11 Pro) Power supply Voltage 100 to 240 V AC, 50/60 Hz Power consumption Max. 200 VA Environmental resistance Ambient temperature 15 to 30 °C Relative humidity 20 to 80% RH (no condensation) Weight Approx. 28 kg (weight of the measurement unit only: approx. 11 kg) Distance extension stage Viewing software VR-5000 Version 3.3.5.75 Image composition module VR-H3J Creates a single large image from a series of images captured with the viewing software. You see color images. Analysis Expansion Module VR-H3CA Extends the functionality of the analysis software. Can perform measurement comparison and 3D CAD measurement comparison. Condition: Used Scope of delivery: (as shown) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions over the phone.

Condition: excellent (used), Espec Type: TSA-202E-W Temperature Shock Chamber, Water-Cooled Cold Chamber: -55°C to 0°C Hot Chamber: +50°C to 200°C System: Two-zone test with damper control Temperature fluctuation ±0.5°C Hot Chamber: Temperature heating time: Ambient temperature (20°C) to +200°C within 15 minutes. Cold Chamber: Temperature reduction time: Ambient temperature (20°C) (20°C) to -55°C within 35 minutes. Temperature recovery: within 5 minutes. Internal dimensions (W x H x D mm): 650 x 460 x 670 External dimensions (W x H x D mm): 1550 x 1900 x 1670 Approx. 200 liters Power supply: 400 V AC 50Hz: 65 A Refrigerant: R404A 5 kg R23 2.0 kg Weight: Approx. 1200 kg For your safety as a buyer, please note the following: Lolowc R A Iehccqqehf The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in steady state according to IEC 60068-3-5 dependent on the test chamber temperature over time ± 1 K Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the insert grid Water level = 0 mm The water level is at the top edge of the insert grid Data for standard spray device Number of spray nozzles: 6 Spray volume per nozzle: 0.5 l/min Lholhcswc Nvgjcqqjf Data for spray device according to EN 539-2, Method B Number of spray nozzles: 6 Spray volume per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray volume of additional nozzle: 6 l/min Compressed air consumption: approx. 3 m³/h Data for water tank with pre-temperature control Volume: approx. 2000 l Temperature range for pre-temperature control +5°C to +40°C Temperature change duration Cooling of +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Installation and Operation Data: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Plug-ins 1 50 mm diameter plug installed on the left Test chamber capacity: approx. 500 liters Refrigerant R-404a Electrical connection: Nominal voltage 3/N/PE AC 400V ± 10% 50Hz Nominal power approx. 26 kW Nominal current approx. 44.0 A (neutral conductor loaded) Fuse protection 63 A gG, on-site Weight approx. 890 kg net For your safety, please note the following information! The following steps are carried out on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Zwick Roell Type: Z100 TEW Technical Data Item No.: 1004501 Test force Fmax: 100 kN Test Chamber Test chamber height: Total height: 1934 mm Height of lower test chamber, without fixtures: 1755 mm Height of upper test chamber, without fixtures (additional crosshead required): 1800 mm Test chamber width: 640 mm Load frame Load frame height: Height without support profiles: 2169 mm Height with support profiles: 2284 ... 3094 mm Load frame width: Width without support profiles: 960 mm Width with support profiles: 1136 mm Width with support profiles and machine electronics: 1329 mm Load frame depth: Depth: 140 mm Depth without Stand profiles, with drive base: 584 mm Depth with stand profiles: 781 mm Weight: with machine electronics without stand profiles, approx.: 470 kg optional stand profiles (one pair), approx.: 34 kg with typical fixtures, approx.: 570 kg Installation area: pure footprint: 0.01 m2 Load frame footprint: 0.867 m2 Specific floor load: based on typical fixtures: 559 kN/m2 with 50% safety: 839 kN/m2 Ceiling load: based on typical fixtures: 6 kN/m2 with 50% safety: 9 kN/m2 Paint finish: RAL 7021 and RAL 7038 Ambient temperature: +10 ... +35 °C Relative humidity (non-condensing): 20 ... 90% Average sound pressure level At vmax measured at a distance of 1 m from the front of the machine: 66 dB(A) Drive Crosshead speed vmin ... vmax 0.0001 ... 1500 mm/min Crosshead return speed, max.: 2500 mm/min Deviation from the set drive speed, max.: 0.05% of vact Drive travel resolution: 0.484471 nm Positioning repeatability (without direction reversal): ±2.0 μm Controller: adaptive Remote control testControl II Safety device Force transducer 100 kN Type: Xforce K Hydraulic power unit Height: 584 mm Width: 502 mm Depth: 817 mm Hydraulic specimen holder Max. test force (Fmax): 70 kN Max. clamping force (at 300 bar): 110 kN The hydraulic specimen grips are designed for tensile, compression, and alternating load tests (static, tensile, pulsating) and are suitable for the following applications: Application Area - Specimen Material: Ferrous and non-ferrous metals, structural sheets, sintered metal materials, hard metals, metal-ceramic composites, hard and reinforced plastics, composite materials, similar materials - Specimen Shape: Flat specimens, round specimens (strips and shoulder specimens), especially small specimens with short clamping lengths - Loading Type: Tensile, compression, alternating load MakroXtens Extensometer Drag Force: ≤ 0.05 N Clamping Force of the Sensor, Manually Adjustable: 0.1 ... 2 N Resolution in conjunction with: 300 mm lever arm length: 0.006 μm 450 mm lever arm length: 0.009 μm 600 mm lever arm length: 0.012 μm Maximum initial gauge length: up to 100 mm Maximum sample width: 60 mm Maximum sample thickness/diameter: 30 mm Dimensions: Height: 375 mm Width: 167 mm Depth: 375 mm Test software: testXpert 3 v1.2 Year of manufacture: 2018 Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) Ljlhcjwcqrpscqqjhf We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Ametek EM Test Type: VDS 200Q25.2 / AutoWave EMC Measurement Technology EM Test VDS 200Q Series 4-Quadrant Voltage Drop Simulator The VDS 200Q Series is a four-quadrant battery supply simulator and DC voltage source used to simulate battery supply waveforms according to international standards and automotive manufacturer specifications. With a current carrying capacity of up to 100 A or more, depending on the model, the VDS 200Q Series covers all three supply voltage categories (48 V, 24 V, and 12 V) and serves as a high-performance DC voltage supply for DUTs during automotive transient testing. VDS 200Q - Four-Quadrant Battery Supply Simulator and DC Voltage Source The VDS 200Q series is used to simulate the various battery supply waveforms recommended by international standards and automotive manufacturer requirements. Manufacturer requirements, in particular, are an important area covered by the VDS 200Q series, given the wide variety of requirements. The VDS 200Q series also serves as powerful DC voltage supplies for the device under test during automotive transient testing. The VDS 200Q series covers all three supply voltage categories (48 V, 24 V, and 12 V). Lhjlhowck Rfoccqqsf Their current carrying capacity ranges up to 100 A or more, depending on the model and application. Advantages of the EM Test VDS 200Q25.2 - Voltage up to 60 V, 2 ranges - 80 V extended option - Current up to 25 A - Four-quadrant, bipolar amplifier - Fast step response time - Very low Ri:

Condition: excellent (used), Vötsch Type: VC 7034 Climatic Test Chamber with Humidity and Air-Cooled Touch Panel Powerful 32-bit Control, Monitoring, and Regulation System Technical Description: Characteristics for Temperature Tests: Temperature Range -70°C to +180°C Temperature Deviation in Steady State according to IEC 60068-3-5, depending on the test chamber temperature temporally ±0.1 to ±0.5 K spatially ±0.5 to ±2.0 K Temperature Rate of Change according to IEC 60068-3-5 Heating: approx. 3 K/min. Cooling: approx. 2 K/min. Heat compensation max. approx. 1000W Characteristics for climatic tests: Temperature range +10°C to +95°C Temperature deviation in steady state according to IEC 60068-3-5 depending on the test room temperature temporally ±0.1 to ±0.3 K spatially ±0.5 to ±1.0 K Distance between measuring points and wall: 100 mm Humidity range 10% to 98% RH Dew point range -3°C to +94°C Humidity deviation in steady state, depending on the climatic value temporally ±1.0% RH to ±3.0% RH Heat compensation 400W at 25°C to 90°C Humidity up to max. 90% RH F. is maintained Data for installation and operation: Test chamber: Width 580 mm, Depth 765 mm, Height 750 mm Housing (installation dimensions): Width 865 mm, Depth 1595 mm, Height 1780 mm Penetrations 1 50 mm diameter penetration installed on the left Lhslhccqowck Dloqjf 1 125 mm diameter penetration installed on the right Test chamber volume: approx. 335 liters Refrigerant R-452a + R23 Electrical connection: Nominal voltage 3/N/PE AC 400V ± 10% 50Hz Nominal power approx. 5.9 kW Nominal current approx. 12.0 A (neutral conductor loaded) Fuse protection 16 A slow-blow, on-site Weight approx. 500 kg net For your safety, the following information is provided as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Kuka Type: KUKA KR 16 R2010 / Control Unit KR C4 / KUKA smartPAD KUKA KR 16 R2010 – Industrial Robot Technical Specifications: Payload: 16 kg Reach: 2010 mm Repeatability: ±0.05 mm Axes: 6 Mounting Types: Floor, ceiling, wall, or angled mounting possible Controller: KUKA KR C4 (standard) Typical Applications: Handling & Assembly Arc Welding Machine Operation Packaging & Palletizing Lholhccjwb Ef Usqqof Pick-and-Place Tasks Special Features: Flexible for use in many industrial sectors High precision and reliability Compact design with long reach Condition: Used Scope of Delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: used, Binder Type: MKF 720 E1 / E1.1 Air-cooled The MKF dynamic climate chamber is a specially developed environmental simulation chamber for industrial materials testing and environmental simulation. Its unprecedented performance far exceeds the capabilities of a conventional heating chamber. It fulfills all the tasks required for materials testing, as well as aging and stress tests. TECHNICAL DATA: Housing dimensions: Width: 1615 mm Height: 2005 mm Depth: 1230 mm Internal dimensions: Width: 1200 mm Height: 1020 mm Depth: 600 mm Main technical features of the MKF 720 E1 / E1.1 Temperature range: -40 °C to +180 °C Humidity range: 10% RH Up to 98% RH Interior volume: 734 liters Weight: approx. 590 kg Refrigerant: R-404A Lhelhccqjwb D Uueqef Power supply: 400 V 3N~ ±10%, 50 Hz Rated power: 8.0 kW Rated current: 12 A Maximum heat compensation: 6500 W Humidity control: Steam humidification with capacitive sensor Controller: Intuitive touchscreen with real-time and time-period programming Data logger: Integrated, with USB readout function Safety functions: Visual and audible alarm, Class 2 adjustable temperature limiter (DIN 12880) Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch Type: VT 7012 S2 Water-cooled Two-chamber design Hot chamber: The temperature range of the hot chamber is from +50°C to +220°C. Temperature deviation over time in the center of the chamber is ± 1 K. Temperature deviation over space is ± 2 K. Temperature change rate: Lholhccowb Dqieqqef Heating: 11 K/min. Cold chamber: The temperature range of the cold chamber is from -80°C to +70°C. Temperature deviation over time in the center of the chamber is ± 1 K. Temperature deviation over space is ± 2 K. Temperature change rate: Heating: 2 K/min. Cooling: 3 K/min. Test chamber volume: 125 liters. Hot chamber temperature range: +50°C to +220°C. Cold chamber temperature range: -80°C to +70°C. Test chamber dimensions: Width: 470 mm. Depth 650mm Height 410mm External dimensions: Width 930mm Depth 2115mm Height 1970+mm Plug-in diameter 67mm Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 10 kW Rated current 25 A Refrigerant R404A / R23 Weight: 1000 kg For your safety, the following information is provided as a buyer! The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Thermo Scientific Type: VT 6130 M / Vacucenter 1 VT 6130 M Vacuum Drying Oven Key Features of the VT 6130 M Model: VT 6130 M Heating System: Jacket Heating (Even Heat Distribution) Lholhccewb A Nqjqqsf Temperature Range: Ambient Temperature +15°C to 200°C Internal Volume: 128 Liters Internal Dimensions (W × D × H): 495 × 529 × 489 mm External Dimensions (W × D × H): 895 × 750 × 720 mm Power Supply: 1N/PE 230 V 9.6 A 2.2 kW Control: Microprocessor Control Vacuum Performance: Ultimate vacuum achievable down to 0.01 mbar High-quality silicone vacuum seal for optimal tightness Smooth interior surfaces for easy cleaning The Thermo Scientific Vacucenter 1 is a fully equipped vacuum pumping station, specifically designed for use with the Vacutherm VT 6060 and VT 6130 series vacuum drying ovens. It enables centralized control of the vacuum oven and pump and offers various pump configurations for different applications. Thermo Scientific Vacucenter 1 Key Features Compatibility: Suitable for Vacutherm 6060 and 6130 series drying ovens. Dimensions (W × H × D): 895 × 900 × 650 mm. Centralized power supply: A shared main switch for the vacuum oven and pump simplifies operation. Mains connection: 1N/PE 400 V 13.0 A 3.4 kW Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Stäubli Type: TX90L Robot / CS8C Controller Six-axis robot with controller The high-performance robots of the TX90 series for medium payloads offer maximum flexibility for a wide range of applications thanks to their compact, slim design. Thanks to three mounting options: floor, wall, and ceiling, the six-axis robots are easy to integrate. The fully encapsulated design (IP 65) enables use in clean rooms or under aggressive environmental conditions. Features Fully encapsulated design with internal supply lines Rigid structure Multiple mounting options Lhjlhowbqwcjccqqof Patented Stäubli JCM gear modules Long reach Advantages Perfect component protection. Standard version in clean room class ISO 5. Easy to clean. Excellent dynamic path behavior High flexibility Precision, dynamics, and speed with reduced maintenance requirements Optimal use of the workspace Technical specifications TYPE TX90L Number of degrees of freedom: 6 Nominal payload: 6 kg Maximum payload: 15 kg Reach: 1200 mm Repeatability: ±0.035 mm Protection class (wrist) IP65 (IP67) Mounting options: Floor / Wall / Ceiling Stäubli CS8 CS8C controller Features Ethernet, fieldbus, digital inputs and outputs, serial interfaces Easy to integrate, 19-inch rack version, protection class IP20 All connections on the front Proven digital technology Advantages Open architecture Compact Good accessibility Reliable Technical specifications: Type CS8C Dimensions (H x W x D) 331 x 445 x 455 mm 481 x 445 x 455 mm Protection class IP20 (IP54 optional) RAM 64 MB RAM (min.) Storage capacity 128 MB (min.) Flash disk and USB port System/Programming language VAL 3 (multitasking interpreter language), PLC-IEC 61131-3 language Communication Serial interface RS232/422, Ethernet, ModBus/TCP server Type: Robot TX90L / Controller CS8C Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch Type: VT 7034 Test chamber capacity: 335 liters Capacity for temperature tests Temperature range: -70 to +180°C Temperature deviation (temporal) K ±0.1 to ±0.5 Temperature deviation (spatial) K ±0.5 to ±2.0 Rate of change: Cooling: 1.3 K/min According to IEC: Heating: 3 K/min Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 5.9 kW, Rated current: 12 A Side feedthrough: 5.5 cm / 12.5 cm Cabinet is air-cooled Refrigerant: R 404A and R 23 For your safety, the following information is provided as a buyer! The following procedures are performed on the chambers we offer in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone. Lelhccqjwbpvweqshf

Condition: used, Glasses Type: ACM 18 Machine control: SIEMENS PLC S7-1200 Safety controller: SICK Flexi Soft 1 media circuit (hydrocarbon) Feed pump: adjustable gear pump (24 V) Vacuum pump: diaphragm pump (230 V / 50 Hz) 1 liftable/pivoting membrane holder with 3 removable cascade rings for filter membranes with a diameter of 47 mm. System filter: 0.2 µm; length: 5 inches Return filter: 5.0 µm; Length: 5 inches System pressure: maximum 6 bar Maximum flow rate: 2.0 l/min Minimum flow rate: 0.250 l/min Maximum system temperature: 41°C Tank volume: approx. 12.8 liters Tank can be filled via a manual 3-way ball valve Recirculation and reuse of the rinsing medium Permissible ambient temperature: +15…+25°C Noise emissions are below 70 dB (A) Flow-cap top with 1 particle filter (separation efficiency: 99.995%; filter class: H14 HEPA filter according to EN 1822) Employee protection against splashing analysis fluid thanks to a sliding guard Collecting tray under the membrane holder Operation via 12" BASIC touch panel (optional COMFORT panel) Operation via glass keypad and stylus with the 12" option COMFORT touch panel 32 different test programs, each with 30 rinsing steps Functions: Spraying, rinsing, ultrasound Basin 750 x 600 x 500 (W x D x H) mm with a usable volume of approximately 5 l for ultrasound (with hemisphere Ø300) Hinged safety screen with three movable panels for manual access (protects employees from splashing analysis fluid) Quick coupling in the basin area for connecting various nozzles. A 2.5 mm diameter nozzle is included. Insertion opening for components: approx. 1100 x 2200 mm (W x H) Basket for ultrasonic application for components up to 3 kg Product support grid for components up to 15 kg Extraction methods: spraying, rinsing, internal rinsing (optional), ultrasound Medium: Cold cleaner A III Analysis membrane Ø 47 mm (up to 3 pieces) Blank value: < 150 µm (from at least SaS 2 or SaS 3) Power supply (machine): 230 VAC 10%, 50/60 Hz Rated power: 500 W Rated current: 2 A Back-up fuse: 16 A (max.) Supply cable: at least 3 x 1.5 mm² Control voltage: 24 VDC3) External dimensions: H x W x D 1922 x 800 x 893 mm Weight: 324 kg Lolhcowaypfocqqehf Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), CTS Type: TSS-70/130 CTS Temperature Shock Test Chamber, Water-Cooled Type Series TSS-70/130 Test Chamber Volume: 130 liters Test Chamber Dimensions: Height, approx. 410 mm Width, approx. 480 mm Depth, approx. 660 mm External Dimensions: Height, approx. 1820 mm Width, approx. 940 mm Depth, approx. 2335 mm Temperature Working Range: Temperature Range in °C: Hot Chamber +50/+220°C Cold Chamber -10/-70°C IC Temperature Transfer Time < 15 min in kg 10.0 Car Changeover Time in sec. < 10 Max. Test Weight in kg 50 Temperature Constancy, Time in K ± 1 Electrical Connection 400 V +6% -10%, 3/N, 50 Hz Lhslhowaanujccqqjf Connected load in kW approx. 16.6 Condenser: Water-cooled chiller Test chamber weight in kg approx. 950 Sound pressure level in dB(A) < 60 Fill-in diameter in mm 125 Refrigerant: R404A/R23 Weight: 950 kg For your safety, please note the following information! The following procedures are performed on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Anton Paar Type: CarboQC At-line MFD with PFD Filling System Description: These precise dissolved CO₂ meters provide reliable quality control of finished packages and containers, as well as directly from the process line or tank. They guarantee fast and accurate determination of dissolved carbon dioxide in beverages during production and filling. In combination with our filling devices, samples can be drawn directly from the package into the measuring chamber of the dissolved CO₂ meter, without any dissolved CO₂ being lost during sample transfer. Combined CO₂ and DO meter: CarboQC At-line For measuring dissolved CO₂ and O₂ in the production environment Sampling directly from process lines, tanks, and (wooden) barrels Protection class IP67 and rubber housing Technical specifications: At-line CO₂ measuring range 0 g/l to 12 g/l (0 vol. to 6 vol.) at 30 °C Lelhccqjv U U D Uoqehf 0 g/l to 20 g/l (0 vol. to 10 vol.) < 15 °C O₂ 0 ppm to 4 ppm Temperature -3 °C to 40 °C, accuracy ±0.2 °C Pressure 0 bar to 10 bar absolute (0 psi to 145 psi), accuracy 0.01 bar Repeatability, St. Dev. CO₂ ±0.04 g/l (0.02 vol.) O₂ 2 ppb (in the range < 200 ppb) Resolution CO₂ 0.01 g/l O₂ 0.1 ppb (in the range from 0 ppb to 99.9 ppb) Sample volume >150 ml Units of measurement CO₂ g/l, vol., mg/l, kg/cm2, MPa, % w/w O₂ ppm, ppb, hPa, mg/l, μg/l, % air saturation, % O₂ saturation Measurement time 90 seconds Data storage 500 measurement data sets Functions FillingCheck™, CO₂| O₂ data logger, threshold function, system check Mobile use: Up to 11 hours of continuous operation Communication interfaces: 1 x RS-232 (CAN-open[1]), 1 x USB; optional: 1 x RFID, 1 x Bluetooth Protection class: IP67 Dimensions (L x W x H) 262 mm x 209 mm x 176 mm Weight: 2.7 kg The PFD filling system transfers your sample directly from the closed container —whether a can or bottle—into the measuring chamber of the measuring device. Since the cap is sealed before piercing, no carbon dioxide is lost during sample transfer, making the PFD and PFD Plus the ideal filling devices for CO₂/O₂ measuring devices and packaged beverage analyzers. Technical Specifications Maximum permitted container volume Cans: 0.5 l Glass bottles: 1 l PET bottles: 3 l Compressed air: 6 ±0.5 bar (87 ±7 psi) relative pressure Dimensions (L x W x H) 190 x 270 x 670 mm Maximum height (cutting head in highest position) 1020 mm Weight: 10.1 kg Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Kuka Type: KR 10 R1100 sixx CR / KR C4 compact Industrial robot Robot has not yet been in operation! The KR 10 R1100 sixx is designed for a nominal payload of 5 kg to optimally utilize the robot's performance and dynamics. With reduced load spacing and suitable additional loads, a maximum payload of up to 10 kg can be attached. The specific load case must be verified with KUKA Load. KUKA Service is available for further advice. Technical Specifications Maximum reach 1101 mm Maximum payload 10 kg Position repeatability (ISO 9283) ± 0.03 mm Number of axes 6 Mounting position Floor Footprint 320 mm x 320 mm Weight approx. 55 kg Controller KUKA KR C4 compact 33 kg KUKA KCP4 Control Panel Teach Pendant Axis data: Motion range A1 ± 170 ° A2 -190 ° / 45 ° A3 -120 ° / 156 ° A4 ± 185 ° A5 ± 120 ° Lslhcsv U T Swjcqqjhf A6 ± 350 ° Cycle time 143 cycles per minute (25 mm / 305 mm / 25 mm, 1 kg) Condition: Used Scope of delivery: As shown (Subject to changes and errors) Technical specifications are subject to change without notice! We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Memmert Type: CTC 256 Environmental Test Chamber / Climate Chamber, Air-Cooled External Dimensions: Dimensions: Width 898 mm x Height 1730 mm x Depth 1100 mm (D +50 mm door handle) Installation: Mobile and lockable, on casters Housing: Fully galvanized sheet steel rear panel Interior: Volume 256 liters Dimensions: Width 640 mm x Height 670 mm x Depth 597 mm Max. Number of Racks: 1 Max. Load per Rack: 25 kg Temperature: Temperature Setting Accuracy: Up to 99.9 °C: 0.1 / From 100 °C: 0.5 Temperature Range without Humidity: -42 °C to +190 °C Temperature Range with Humidity: +10 °C to +95°C Spatial temperature deviation: +/- 0.5 to 2 K Humidity: Humidity control: active humidification and dehumidification from 10-98% rh with digital display of relative humidity 3N 400 V 50 Hz 10.6 A 7000 W Lhjlov U N Emjhccqqof Refrigerant: R404A Net weight approx. 337 kg For your safety, please note the following information! The following procedures are performed on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), White Type: WK-340/70 Air-cooled Test chamber capacity: approx. 335 liters Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1805 mm, Width 780 mm, Depth 1700 mm Characteristics for temperature tests: Temperature range -70 to +180°C Temperature fluctuation over time: ± 0.1 to ± 0.5 K Lolhccsv Uap Njqqjhf Temperature fluctuation over space: ± 0.5 to ± 2.0 K Temperature change rate for heating: 3 K/min Temperature change rate for cooling: 2 K/min Characteristics for climatic tests: Temperature range +10 to +95°C Humidity range: 10 to 98% RH Temperature fluctuation over time: ± 0.1 to ± 0.3 K spatial ± 0.5 to ± 1 K Humidity fluctuation in the center of the usable space ± 1 to ± 3% RH Electrical connection: 3/N/PE AC, 400 V ± 10%, 50 Hz Connected load: approx. 4.1 kW Rated current: 14.0 A Sound pressure level: approx. 60 dB(A) Weight: approx. 500 kg Refrigerant: R404A / R23 For your safety, please note the following information!   The following steps are carried out in advance on our chambers: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful testing, the chambers are subjected to a test run monitored by calibrated devices. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), GALDABINI Type: Quasar 50 / Nominal Capacity: 50 kN with PC, monitor, and GraphWork 5 testing software Universal Testing Machine The "QUASAR" universal testing machines are designed as single-room testing machines and essentially consist of the following components: Machine frame. The design and structure of the machine load frame is designed where necessary for the specified maximum loads: Electromechanical load application with toothed belt drive, toothed belt pulleys, drive with DC or brushless servo motor, and recirculating ball screws. Load measuring system with load cell suitable for tension and compression. Lhelov Tywqohccqqsf Electronic control unit that performs all functions: Regulation and control, monitoring, and recording of the output signals of the measuring amplifiers for force, strain, and crosshead travel. The system is based on a 32-bit processor with a clock speed of 25 MHz; The analog signals are acquired by an A/D converter with 20-bit resolution. The electronic control system is usually located in the base of the machine. This also applies to most of the electrical components of the drive and power supply. The operator interface is connected to the PC via an RS232 serial interface with a high transmission speed of 38400 baud. Rigid two-column system with a maximum capacity of 50 kN. Suitable for metals, plastics, composites, and other materials. Stylish design and advanced features. Flexible and modular design for easy future expansion. Key technical advantages include extremely high resolution of load and stroke values, as well as a minimum test speed of 0.0005 mm/min for the highest performance and most accurate results. Technical specifications: Nominal capacity: 50 kN Speed at maximum load: 0.0005÷200 mm/min No-load speed: 500 mm/min Distance between clamps: 1000 mm Total stroke: 1000 mm Crosshead travel resolution: 0.1 µm Positioning repeatability: 2 µm Distance between wedge clamps: 480 mm Clearance between columns: 410 mm Unit of force Newton - daN - kgf - Ibs Dimensions: Height: approx. 1548 mm Width: approx. 700 mm Depth: approx. 730 mm Power supply: 220V (+10%) 50 Hz Power consumption: 0.65 kW Weight: approx. 255 kg without accessories Recommended lighting during use: 300 lux Weight: approx. 255 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Functionality: fully functional, Tennant Type: T7+ ec-H2O™ Compact design with high maneuverability Product description: Clean hard floors comfortably, nimbly, and economically: with the battery-powered Tennant T7+ ride-on scrubber-dryer. Thanks to its compact design, the ride-on machine is ideal for gaps and narrow aisles. The optional ec-H2O NanoClean technology reduces water and detergent consumption. Compact design – ideal for aisles and elevators. Clear sightlines and simple controls. Optimal water suction – no cleaning agent residue. Optional ec-H2O-Clean technology for reduced cleaning agent consumption. Easy-to-clean, hygienic tanks. Low noise level of 67 dB(A). Automatic brake and parking brake. Available in various working widths. Includes battery, on-board charger, and brush. Technical details: Area of application: Indoors. Battery operation: Voltage: 24 V. Battery type: Lead-gel battery. Battery capacity: 240 Ah/per unit. Frequency: 50-60 Hz. Speed: 6.4 km/h. Direction of travel: Reverse, forward. Noise level in dB(A): 67 dB(A). Removable fresh/dirty water tank. Fresh water tank volume: 110 l. Dirty water tank volume: 110 l. Theoretical area coverage: 5120 m²/h. Practical area coverage: 5120 m²/h Working width 800 mm Brush diameter 400 mm Brush speed 260 rpm Brush contact pressure 36 - 73 kg Brush motor power 450 W Brush-assisted drive no Brush shut-off automatic yes Tires material rubber Wheels number 3 Non-marking wheels yes Wheel width 80 mm Wheel diameter 250 mm Turning circle 1840 mm Operator cockpit yes Squeegee material Linatex Squeegee width 1000 mm Suction motor power 450 W Body color Teal Frame color Teal Height 1270 mm Width 740 mm Lhslsv Tvq Hjhccqqjf Depth 1270 mm Weight 443 kg Version with ec-H2O™ Rim material Polyamide Condition: used / Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch Type: VCL 7003 Air-cooled climatic test chamber Test chamber capacity approx. 34 liters Capacity for temperature tests: Temperature range -70 to +180°C Temperature deviation over time ±0.3 to ±1.0 K Temperature homogeneity over space ±0.5 to ±2.0 K Heating rate of change 4.0 K/min Cooling rate of change 3.0 K/min Heat compensation max. 550 W Temperature calibration value +23°C and +80°C Capacity for climatic tests: Temperature range +10 to +95°C Humidity range 10 to 98% Humidity deviation over time ±1 to ±3% Temperature deviation over time ±0.3 to ±0.5 K Lheljv Tnd Sohccqqof Spatial temperature homogeneity ±0.5 to ±1.5 K Climate calibration values +23 °C / 50% RH and +95 °C / 50% RH Test room dimensions: Width 350 mm, Depth 300 mm, Height 310 mm External dimensions: Width 640 mm, Depth 750 mm, Height 1730 mm Electrical connection: 1/N/PE AC 230 V ±10%, 50 Hz Rated current 11.0 A Rated power, max. 2.5 kW Sound pressure level 59 dB(A) Refrigerant: R-404 A / R23 Weight approx. 130 kg For your safety, please note the following information as a buyer! The following steps are performed on our chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.