Used heating for sale (78)

Condition: excellent (used), Year of construction: 2003, operating hours: 123 h, functionality: limited functionality, heating capacity: 350 kW (475.87 HP), nominal heat output: 350 kW (475.87 HP), temperature: 95 °C, MAWERA FU350RIA – Fully automatic heating system with underfeed stoking – 350 kW – Year of manufacture 2003 Manufacturer: MAWERA Type: FU350RIA Year of manufacture: 2003 Rated output: 350 kW Heating system: Fully automatic biomass heating system with underfeed stoking Heating medium: Hot water Maximum supply temperature: 95 °C Scope of supply: Boiler body Combustion chamber with heat exchanger Ash separator Flue gas ducts for connection to the chimney Flue gas fan Discharge system Stoker screw (conveyor screw) Casing Ljdpszi Hibefx Agpehi LOGIC control system Electrical control cabinet Operating and maintenance manual Condition The system is in good technical condition and has already been professionally dismantled. The combustion chamber is in perfect condition and shows only minimal signs of wear. The photos were taken before dismantling. An inspection is possible at any time in Bavaria after prior arrangement. This high-quality MAWERA biomass heating system is ideal for industrial and commercial enterprises, woodworking companies, agricultural operations, and district heating systems. Thanks to its robust design, the fully automatic control system, and its excellent condition, it represents an economical and reliable solution for long-term use.

Condition: excellent (used), Year of construction: 2016, Solid fuel boiler. Very good condition. Operates with wood chips, wood waste, and sawdust. Lhodpfx Agoy Uzhrjpji

Condition: used, Year of construction: 2010, functionality: fully functional, Max. working temperature 90° C. Max. working pressure: 2 kg/cm². Power 3.000.000 kcal Fuel: wood waste The MTN boiler is a hot water generator that uses sawdust as fuel, with "AUTOFOCO" type burner loading. The boiler is of horizontal type Tubular plates and shell are made of thick carbon steel sheet. The core is covered with refractory cement with a high percentage of alumina. At the rear there is a cast iron grate for burning solid pieces of wood, calculated for an output equal to 60% of the rated output of the boiler. The tube bundles are made of carbon steel. The base incorporating the hearth is of large dimensions, to allow the burner to be mounted with a plug. The boiler is supplied with an air distribution manifold. The boiler body is insulated with mineral wool and covered with cast iron Accessories: - 1 Adjustable thermostat - 1 safety thermostat - 1 safety thermostat with manual start - 1 thermometer - 1 hydrometer - 1 combustion control device - 1 thermostatically actuated valve positioned in the flue tube MANUAL FEED GRILL is a fixed grill made of special nodular cast iron bars, fixed in refractory material, easily interchangeable. 1 Complete electrical components, motor protections, contactors. 1 Complete set of wiring accessories 1 General circuit breaker 1 Power supply for auxiliary circuits Ljdpfstywzqsx Agpjhi 1 Circuit diagram 1 Pressure gauge 2 Temperature probes 1 Dust suction system consisting of a fan with belt transmission, with decanter cyclone, boiler-cyclone connections, cyclone-fan, fan-fan, fan-smoke stack, in painted carbon steel. 1 Chimney

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Superheated water boiler at 152°C, 1 Gcal/h, automatic feed, year of manufacture 2014 – manufacturer Sceat Italia - Heat output: 1,000,000 kcal/h - Pressure: 4 bar - Superheated water temperature: 152°C - Equipped with control thermostat, safety thermostat, thermometer - Working pressure: 4 atm - Fuel: wood waste, sawdust - Flue gas evacuation system: cyclone, forced draft fan, connection ducting - Furnace: lined with high alumina refractory bricks – prepared for wet materials from processing. Special refractory bricks laid with high alumina content cement, suitable for high humidity – optimized for the combustion of sawdust from log cutting Flue gas extraction system - Belt-driven fan - Multicyclone separator - Connecting ducts: boiler-multicyclone, multicyclone-fan, fan-chimney - Chimney Included accessories - 2 safety valves - Cast iron discharge valve - Operating thermostat - Safety thermostat - Thermometer Lhjdpfx Ajw Ewafsgpji - Safety pressure switch - Pressure switch guard - Manometer with 3-way valve - Alfa 10 diameter 50 discharge valve Flue gas removal system - Cyclone for collecting solid combustion particles before flue gases are released into the atmosphere - Smoke extractor/fan to improve combustion by increasing draft in the boiler, essential if a smoke treatment system is present or when significant flow losses occur - Painted carbon steel alloy connection ducts between boiler and multicyclone, and between multicyclone and fan - Electrical panel serving the feed electropump, static level, pressure switches, minimum level probe for the smoke extractor fan, and all devices serving the generator - Chimney made of carbon steel

Condition: used, Year of construction: 2009, operating hours: 30,374 h, functionality: fully functional, machine/vehicle number: 000-0059085/3, overall weight: 997 kg, volume flow: 209 m³/h, power: 113.9 kW (154.86 HP), heating capacity: 99 kW (134.60 HP), smoke pipe connection diameter: 200 mm, nominal heat output: 113.9 kW (154.86 HP), space requirement length: 3,140 mm, space requirement height: 2,400 mm, space requirement width: 2,170 mm, temperature: 90 °C, total height: 2,310 mm, total length: 2,040 mm, total width: 860 mm, type of input current: three-phase, exhaust gas temperature (max.): 160 °C, input voltage: 400 V, negative pressure: 15 Pa, nominal power: 99 kW (134.60 HP), tank capacity: 10 l, input current: 13 A, operating pressure: 3 bar, Equipment: documentation/manual, hot water, KWB UNIT USV100 Biomass boiler / wood pellet and wood chip boiler, 99 kW, year of manufacture 2009 For sale is a used KWB UNIT USV100 biomass boiler with a nominal thermal output of 99 kW. Dismantling will take place on July 1, 2026, in Austria, 2100 Leobendorf. Dismantling will be carried out professionally by us. Important note: If the buyer takes over and collects the boiler directly after dismantling in Leobendorf on the day of dismantling, we can offer a price reduction, as in this case, transport to Hungary will not be necessary. The KWB Multifire / UNIT series is a robust biomass heating system for wood pellets and wood chips. The system is ideally suited for larger residential buildings, agricultural buildings, commercial properties, public buildings or smaller district heating networks. According to the nameplate, this boiler is designed for wood pellets with a diameter of 6 mm. The KWB Multifire series is basically designed as a wood pellet and wood chip heating system; operation depends on the existing extraction or conveying system. Main features / equipment: * Robust biomass boiler from KWB, an Austrian quality manufacturer * Suitable for pellets / wood chips depending on the extraction and conveying system * KWB Comfort 3 control, automatic and easy operation * Automatic power adjustment according to heat demand * Automatic heat exchanger cleaning with patented special turbulence generators * KWB MultiFlex burner plate cleaning for different fuel qualities * Underfeed gasifier combustion system with high-temperature combustion zone * Optimal combustion through broadband lambda probe and negative pressure control * Automatic ash extraction with ash compaction * Ash container with level monitoring * Gas-tight and backfire-proof fire protection damper * Reliable conveying technology for individual extraction systems * Robust stoker screw with stainless steel spirals and hard metal coating * Low-maintenance, double-sealed heavy-duty gearbox * Suitable for larger heating systems and commercial applications Technical data: * Manufacturer: KWB * Type: UNIT USV100 / USV D * Year of manufacture: 2009 * Operating hours: 30,374 h * Nominal thermal output: 99 kW * Minimum thermal output: 27.6 kW * Fuel heat output at nominal thermal output: 113.9 kW Lhsdpfx Agszhh Iispoi * Fuel according to nameplate: Wood pellets 6 mm * Biomass system: Pellets / wood chips * Max. operating pressure: 3.5 bar * Max. operating temperature: 90 °C * Water content: 167 liters * Smoke pipe connection: 200 mm * Electrical connection: 3N 400 VAC / 50 Hz / 13 A * Max. electrical power consumption: 2328 W * Weight: approx. 997 kg * Serial number: 000-0059085/3 The boiler is sold used, as shown in the pictures. Inspection is possible by appointment. Sale without guarantee and without return. Loading and transport can be arranged by agreement. Current location until dismantling: 2100 Leobendorf, Austria After dismantling: Mosonmagyaróvár, Hungary

Condition: new, Year of construction: 2023, Due to a planning error, I am selling a new, originally packed cantilever discharge system for a Fröhling heating system for 6 m room size with 1 m auger extension Lhjdpfx Agjuq Iy Repji with separate drive for screw and turntable as 2 motors, ideal for 2 boilers Photo is from another system as mine is still packed

Condition: used, Year of construction: 2001, Mawera wood chip heating system FU 350 RIA, underfeed firing system, output 350 kW, year of manufacture 2001, including feed screw with flashback protection, including control system, including dust collector with flue gas fan. System is fully functional; hopper discharge system is not included! Lhedpfovyrwpjx Agpoi

Condition: used, Year of construction: 2004, Wood chip heating system Mawera FSR 1100, output 1000 kW, max. operating temperature 110°C, year of manufacture 2004, including hydraulic connection unit, including multi-cyclone separator, including ash removal to the basement, including control system, photos of the pneumatic cleaning system show the condition as new. Dismantling must be carried out by the buyer; a forklift is available, and the system can be rolled out as a single unit. Lsdpfxsvgf Ibs Agpjhi

Condition: excellent (used), heating capacity: 175 kW Lhsdpeza Dxcefx Agpei heat output released into the air: 140 kW fan capacity: 8900 m3/h fuel: solid fuel of wood origin year of manufacture: 2007 weight: 615 kg power supply: 380 V CE marking

Condition: used, functionality: fully functional, FABBRI F85 115 kW forced-air furnace Specifications: • Condition - used • Manufacturer - FABBRI • Model - F85 • Year of manufacture - 2001 • Maximum power - 115 kW • Max. capacity - 6300 m3/h • Controller included • Power supply 220 V • Outlet ducts - 2 x 250 mm • Chimney outlet - 180 mm Lhsdpfxoza H Uyj Agpoi • Exhaust turbine on the chimney • Fuel hopper dimensions: 56 x 56 x 730 cm • The furnace is ideal for burning wood or briquettes • Overall dimensions - 160/120 x 80 x 232 cm (length/length without turbine x width x height) Additional information: • The machine is in good technical condition and ready for immediate use • The photos shown reflect the actual condition of the item for sale • Possibility to turn on and test the device on-site • Free training on machine operation (at the company's premises) • The price stated in the auction does not include VAT and transport costs Financing and transport: • We arrange transport using the MDD fleet, courier companies, or external carriers • We offer financial support in the form of leasing or a lease loan

Condition: like new (used), Year of construction: 2016, Solid fuel boiler. Ledpsy S E Nzsfx Agpjhi

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, nominal power (apparent): 3,000 kVA, Industrial hot water boiler 3,000,000 kcal/h. Rated power: 3,000 kcal, approximately 3.4 MW. Ledpfx Ast Ngfijgpehi

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 6678, overall weight: 4,000 kg, power: 280 kW (380.69 HP), heating capacity: 280 kW (380.69 HP), smoke pipe connection diameter: 400 mm, nominal heat output: 300 kW (407.89 HP), Nolting wood heating boiler, sturdy high-quality stove. Features automatic wood feed and a separate manual stoking section. Manual filling capacity: 1000 liters. Lhsdoy Sgi Nspfx Agpji

Condition: used, Year of construction: 1996, Uniconfort brand hot water generator with 540,000 kcal/h Lsdpfx Ajy Ud Stegpshi Kcal/h: 540.000

Condition: used, Year of construction: 2012, Complete Power Plant, Full CHP Plant Wood Chip Heating / Thermal Oil System VAS 6MW Thermal + 1.1MW Electrical Output The plant was originally built in 2003 & 2004. Major components such as the thermal oil heater and hot water ECO were entirely replaced in 2012. Components: - Walking floor - Hydraulic feed - VAS combustion chamber - VAS thermal oil heater - Hot water ECO - Dedusting (coarse and fine dust removal) - Ash removal by chain conveyor - Exhaust gas path incl. fans and chimney system - Turboden ORC module with 1.1MW electrical output - Complete plant control with visualization Including units, pumps, and valves Lhedpfx Agevytfuepei Including thermal oil pumps Including thermal oil Including all accessories required for operation The plant is being sold because a larger plant with significantly higher capacity has been built nearby. The walls and roof of the boiler house can also be included if required. Remaining thermal output in operation with Turboden ORC module: 5MW Electrical output ORC module: 1.1MW Fuel consumption approx. 9 loose cubic meters per hour (depending on fuel) Dismantling must be carried out by the buyer. Further information on request.

Condition: ready for operation (used), Boiler plant for production of steam. Capacity : up to 12 MW Production capacity 16 ton per hour at 20 bar steam. Ledpfx Aoy Av Rdsgpehi Working pressure : From 5 bar to 20 bar Steam temp 215 degrees C Designed for solid fuel like, wood chips, sawdust, bark

Condition: good (used), Year of construction: 2013, Complete heating system, but without fuel extraction from the storage room, with cyclone for flue gas dust removal, already dismantled. Lhedpfx Ageytra Uspei

Condition: new, Year of construction: 2026, heating capacity: 49 kW (66.62 HP), smoke pipe connection diameter: 180 mm, input voltage: 380 V, Size: 2/S Rated thermal output: 49 kW -- Complies with German Federal Immission Control Act (BImSchV) Stage 2 and CE standards -- Combustion chamber fully lined with fireclay bricks For rooms of: 1,450 m³ (according to DIN) Fuel: logs, chipboard, wood chips, chip briquettes Lhjdpfodlhafjx Agpji Fuel consumption: 15 - 25 kg/h Forced air flow rate: 4,000 m³/h Exhaust outlet: Ø 450 mm Flue gas connection: Ø 180 mm Weight: 1,025 kg PLC control cabinet: 380 volts

Condition: new, Year of construction: 2026, Size: 6 Lhsdpfx Aodlhdbjgpsi Nominal heat output: 170 kW -- Compliant with German Federal Immission Control Ordinance (BImSchV) Stage 2 and CE standards -- Firebox completely lined with refractory bricks Suitable for rooms of: 4,800 m³ (according to DIN) Fuel: Logs, chipboard, wood chips, wood chip briquettes Fuel consumption: 40 - 50 kg/h Blower air capacity, free-blowing: 14,000 m³/h Exhaust outlet: Ø 700 mm Smoke pipe connection: Ø 220 mm Weight: 2,150 kg PLC control cabinet: 380 volts

Condition: new, Year of construction: 2026, Model: Prestige SE Nominal heat output: 25 kW Ledpfx Agjdlhcyspehi -- Complies with German Federal Immission Control Act (BImSchV) Stage 2 and CE standards -- Combustion chamber completely lined with fireclay bricks Suitable for rooms of: 350 - 600 m³ (according to DIN) Fuel: Logs, wood chips, wood chip briquettes Fuel consumption: 8 - 10 kg/h Forced air output: 1,450 m³/h Discharge opening: Ø 300 mm Flue gas connection Ø 150 mm with flue gas blower Weight: 400 kg PLC control cabinet: 220 Volts

Condition: new, Year of construction: 2026, Heating output / nominal thermal output: 21 kW For rooms up to approx. 300 to 500 m³ (according to DIN 4108) Lhjdpohvibzsfx Agpji Flue outlet: rear (standard) Flue: Ø 180 mm Filling chamber volume: 80 liters Required chimney draft: min. 12 Pa Dimensions of the filling opening (L x W): 300 x 340 mm Weight: 375 kg Efficiency: 88.2 % Energy efficiency class: A+ The EWI-A 15G space heaters are type-tested according to DIN EN 13240, 15a B-VG (Austria) and LRV (Switzerland). They comply with the limit values of the 1st BImSchV (Federal Immission Control Ordinance).

Condition: new, Year of construction: 2026, Size: 0 Nominal heat output: 34 kW -- Complies with German Federal Immission Control Act (BImSchV) Stage 2 and CE standards -- Combustion chamber completely lined with fireclay bricks For rooms of: 850 m³ (according to DIN) Fuel: Logs, chipboard, wood chips, chip briquettes Fuel consumption: 10 - 12 kg/h Forced draft air volume: 2,200 m³/h Outlet opening: Ø 350 mm Flue gas connection Ø 150 mm with flue gas fan Weight: 690 kg Ljdpfx Aodlgvfjgpohi PLC control cabinet: 380 Volts

Condition: new, Year of construction: 2026, Size: 3 Nominal heat output: 87 kW -- Complies with German Federal Immission Control Act (BImSchV) Stage 2 and CE standards -- Combustion chamber completely lined with fireclay bricks Suitable for rooms of: 2,200 m³ (according to DIN) Ledpfx Agjdlhbpjpshi Fuel: Logs, chipboard, wood chips, wood chip briquettes Fuel consumption: 25 - 30 kg/h Blower air flow rate, free-blowing: 6,000 m³/h Outlet opening: Ø 500 mm Flue connection: Ø 200 mm Weight: 1,250 kg PLC control cabinet: 380 volts

Condition: new, Year of construction: 2026, Size: 4 Nominal heat output: 116 kW -- Complies with German Federal Immission Control Act (BImSchV) Stage 2 and CE standards -- Combustion chamber fully lined with refractory bricks Suitable for rooms of: 2,900 m³ (according to DIN) Fuel: Logs, chipboard, wood chips, wood chip briquettes Fuel consumption: 30 - 35 kg/h Forced air supply, free-blowing: 7,500 m³/h Exhaust outlet: Ø 600 mm Flue gas connection: Ø 220 mm Weight: 1,550 kg PLC control cabinet: 380 volts Lhedjdlhcdspfx Agpoi

Condition: new, Year of construction: 2026, Size: 5 Nominal heat output: 145 kW -- Complies with German Federal Immission Control Act (BImSchV) Stage 2 and CE standards -- Combustion chamber completely lined with fireclay bricks For rooms of: 3,800 m³ (according to DIN) Fuel: logs, chipboard, wood chips, chip briquettes Fuel consumption: 35 - 40 kg/h Forced air output: 9,400 m³/h Exhaust outlet: Ø 700 mm Lhsdpfx Ajdlhcrsgpei Flue gas connection: Ø 220 mm Weight: 1,950 kg PLC control cabinet: 380 volts