Used Honing machines for sale (58)

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, SUNNEN cross sanding machine with automatic lifting device in very good condition TECHNICAL DETAILS Honing diameter manual stroke: 1.5 - 165 mm automatic stroke diameter: 1.5 - 101.6 mm Stroke length: 6 - 170 mm Stroke speed: 60 - 500 1/min Spindle speed: 200 - 3000 rpm Spindle drive motor: 4.1 kW MACHINE DETAILS Connected load: 10.5 kVA Machine weight: approx. 1 t Dimensions: 2.0 x 1.3 x 1.9 mm EQUIPMENT - two-stage grinding pressure (roughing & finishing in one cycle) - automatic grinding pressure regulation (SDR) - Automatic sanding strips - wear compensation - Filter system for honing oil cleaning - Zero cut-off or ASC Fjbvapgjtuu Dpsqjgb

Condition: ready for operation (used), Year of construction: 1993, Functionality: fully functional, machine/vehicle number: 28-7032, spindle speed (min.): 80 rpm, spindle speed (max.): 1,500 rpm, travel distance Z-axis: 1,500 mm, travel distance milling slide Z-axis: 350 mm, TECHNICAL DETAILS Control system: SIEMENS NC Honing capacities Honing diameter: 10 - 120 mm Stroke: 350 mm Max. honing length: 700 mm Spindle speeds (infinitely variable): 80 - 1,500 rpm Fgobvjvbgkyjapgqob Travel distances Z-spindle stroke: 350 mm Z-slide stroke: 1,500 mm Cross slide travel: ± 60 mm Longitudinal travel: 1,800 mm Table and swivel Swivel table: fixed at 0°/30°/45° Other technical data Rotation speed: 80 - 1,500 rpm Variable rinsing rings: 60 - 105 mm Control unit: MS-U2 Programs: 99 programs available Tool control: hydraulic/EMZ/macroform Dimension control: via air measurement Note: Machine is set up but not connected & can be inspected under power on request

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, spindle speed (min.): 120 rpm, spindle speed (max.): 1,275 rpm, lifting speed: 25 mm/s, feed length Z-axis: 500 mm, hone diameter: 56 mm, TECHNICAL DETAILS Control: Siemens PLC control S7, NAGEL honing spindle control MS-U3 Production capacity: 90 workpieces/h at 100 % capacity utilization Roundness: 0.006 mm / 0.012 mm Bore tolerance: 22.018 - 22.028 mm / 56.000 - 56.019 mm Surface roughness (Rz): 4 µm / 6.3 µm Honing time: 28 / 33 seconds Secondary time: 12 / 7 seconds Cycle time: 40 seconds Workpiece Type: Connecting rod, large and small eye Hardness: 100 - 130 HB Machining diameter: 22 - 26 mm Machining length: 20.8 - 20.23 mm Workpiece holder: clamped and held down Machining data Pre-machining: fine-turned Diameter: 21.99 - 22.01 mm / 55.95 - 55.99 mm Roundness: 0.007 mm / 0.01 mm Surface roughness (Ra): 6 - 8 / 8 - 12 µm Material allowance: 0.013 - 0.033 mm / 0.02 - 0.06 mm Tool type Tool type: Diamond, articulated rod Honing spindle Number of honing spindles: 2 Stroke length: 0 - 500 mm Stroke speed: 25 m/min (infinitely variable) Tool holder: top / bottom, infinitely adjustable Spindle speed: 425 - 1,275 rpm and 120 - 360 rpm Drive power Stroke drive power: 5.5 kW Spindle drive power: 3 kW / 4 kW Measuring technology Measuring system: electro-mechanical step expansion Air measuring device: 0.0005 - 0.08 mm MACHINE DETAILS Installation area / height: 6,200 x 3,900 / 4,300 mm Weight: approx. 8 t Color: machine light grey RAL 7035, control cabinet capri blue RAL 5019 Construction: Welded steel construction in panel construction. The uprights have been artificially aged to relieve stresses. Fgjbouyidkevapgqeb Hydraulic equipment Hydraulic tank: 400 l Electrical equipment Operating voltage: 400 V, 50 Hz with neutral conductor Control voltage: DC 24 V Total connected load: 28 kW Standard: according to VDE 0113 Note: Machine is set up but not connected & can be inspected under power on request

Condition: used, Vibratory machining machine with a capacity of 125 liters made by Rosler. Available immediately at our warehouse in Gliwice. Fjbvjhvy Rxoapgqsgb

Condition: excellent (used), Various new honing stones, horns, guide shoes and accessories Sunnen. Fjbvapsigvrajgqjgb Used honing stones Sunnen, PG800-EM

Condition: excellent (used), 109x 0.5mm matte, covered with a protective film Fsbvapgoq Iux Ioqegb 65x 0.3mm polished, covered with a protective film 71x 0.25mm polished, covered with a protective film Aluminum strip manufacturer "ALMECO" When buying about 100kg, 1kg at 7eu When buying about 500kg, 1kg at 6eu When buying about 1000kg, 1kg at 5eu.

Condition: used, Year of construction: 1982, Technical details: honing diameter: 30-180 mm stroke: 600 mm throat: 370 mm Verticval Honingmachine - machined Cyliner Liner - out of OEM Line. * Febvaerpcbmjpgqogb

Condition: used, Year of construction: 2003, Technical details: honing diameter: 63 - 180 mm stroke: 15 - 600 mm throat: xxx mm stroke speed: 0 - 24 m/min distance table - lower edge spindle: 1545 - 2145 mm spindle speeds:: 24 - 128 1/min. spindle diameter: 75 mm feed: EMZ-F/HAZ Do 80 dimensional control: Marposs GCU/AP11 Fgjbvjizld Heapgqjb Verticval Honingmachine - machined Cyliner Liner - out of OEM Line. NC Control GEHRING II, Siemens S7-300 SPS 2003 retrofit *