Condition: used, Year of construction: 2007, x-travel 2.000 mm Fgelijvy Inder Nggob y-travel 810 mm z-travel 810 mm Control Fanuc spindle tunring speed 6.000 U/min tool taper BT 40 distance spindlenose to table 100 - 910 mm 2.500 kg In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: repair required (used), Year of construction: 2005, Functionality: not functional, QUASER Model : MV154EL/12 Year : 2005 Control : Fanuc 0iMC Table : 1200X500mm Axis : X -1200mm Y - 530mm Z - 560mm BT 40 Spindle speed : 12000 RPM Fjlir Ngowhiu Hegogb Weight : 6850kg NOT IN WORKING CONDITION

Condition: excellent (used), Year of construction: 2016, In good technical condition and fully functional. Built in 2016. Machine includes 4-axis TSUDAKOMA, workpiece probe, and tool probe. Drives Axis drives (X/Y/Z) 1,000 / 550 / 500 mm Distance table surface - spindle surface 130 - 630 mm Axis guide - linear rolling LM Table work surface 1,100 x 502 mm Load capacity 700 kg Table surface configuration mm 5x T-slot (width 18, pitch 80) Maximum spindle speed 12,000 rpm Spindle power (10 min./continuous) kW 18.5 / 11 Rapid feeds (X/Y/Z) m/min 36 / 36 / 30 Working feed (X/Y/Z) mm/min 1 - 24,000 Sliding motor (X/Z) kW 1.8 / 1.8 / 3.0 Automatic tool change Fgelev Ta Snoir Nggeb Tool taper - BT40 Clamping bolt - MAS P40T-1 (45°) Number of tool positions: 24 Max. tool diameter mm Ø 80 / Ø 150 (without secondary tool) Max. tool length / weight mm / kg 300 / 8 Tool-to-tool change time: Section 2.5 Chip-to-chip change time: Section 4.3 Magazine and change disk design with rotating arm Power consumption: 30 kVA Tank capacity for spindle lubrication/cooling: l 6 / 20 For cooling emulsions: l 380 Machine dimensions: Height mm 2,670 Floor area (length x width) mm 3,335 x 2,200 Weight: 6,500 kg Control system: Fanuc 0i-MD Air blowing of the spindle Machine adjustment elements Machine protective cover Screw conveyor in the work area Cooling system Safety door Ethernet interface

Condition: used, Year of construction: 2001, Functionality: unexamined, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, total height: 2,500 mm, total length: 2,200 mm, total width: 2,400 mm, table width: 510 mm, table length: 760 mm, table load: 1,000 kg, For sale is a Hurco VMX 24 3-axis CNC milling machine. The price of €5,000 net applies for pickup by Friday, March 28th. Technical specifications: - Year of manufacture: 2001 - Control system: Winmax 4 - X-axis: 610.0 mm - Y-axis: 510.0 mm - Z-axis: 610.0 mm - Table length: 760.0 mm - Table width: 510.0 mm - Max. part weight: 1000.0 kg - Length: 2200.0 mm - Width: 2400.0 mm Felisv Tcfker Nggjgb - Height: 2500.0 mm - Weight: 4700.0 kg - Number of tool pockets: 24 Pull studs shown in pictures are not included in the offer. Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange is possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, visit our website.

Condition: good (used), Year of construction: 2017, WAGNER WMC 1100 B 5-axis CNC machining center, No. M11198, built in 2017, with clamping table, 30-station tool changer, chip conveyor, cooling system, SIEMENS Sinumerik 828D control system, weight approx. 8,000 kg. Fgjlijwczltjr Nggeb

Condition: good (used), Year of construction: 2008, travel distance X-axis: 600 mm, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, SW BAS 03 - 12, Year of construction 2008 Siemens 840 D control system, Travel X/Y/Z 600/400/400 mm, spindle speed up to 17,500 rpm, HSK 63 holder, tool changer 40 times, NC swivel table 450 x 830 mm, max. table load 400 kg, Minimum quantity lubrication, Folioulk Uger Nggogb water cooler, IKZ 40 bar, scraper belt conveyor,

Condition: used, Year of construction: 2007, x-travel 1.600 mm y-travel 910 mm z-travel 810 mm Control Fanuc spindle tunring speed 6.000 U/min tool taper BT 40 distance spindlenose to table 150 - 960 mm 2.000 kg In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery Fjlijvy Im Tsr Nggogb if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: like new (used), Year of construction: 2020, Functionality: fully functional, Equipment: documentation/manual, Purchased new in 2021. Was commissioned but has never been operated, Condition is as new. Fjliowalzyjr Nggogb

Condition: good (used), Year of construction: 2007, The scope of delivery consists of two machines: 1x HSM600U 1x HSM400U with Erowa pallet connection The Heidenhain TNC530 control system for the machines was previously used for graphite processing Fslov S Erdeir Nggogb

Condition: good (used), Year of construction: 2008, MACHINE SPECIFICATIONS X travel: 1035mm Fgolielp Rlior Nggob Y travel: 560mm Z travel: 510mm Rapid traverse X/Y/Z: 25m/min Feed: 20m/min Table dimensions X: 1200mm Table dimensions Y: 560mm Maximum table load: 1000kg Spindle speed: 9000rpm Power: 13kW, torque: 83Nm Tool holder: SK40 Tool positions: 20 Maximum tool diameter: 80mm/130mm Maximum tool length: 300mm Maximum tool weight: 6kg Machine dimensions X: approx. 4000mm Machine dimensions Y: approx. 4000mm Machine dimensions Z: approx. 2500mm Weight: approx. 4100kg Control: FANUC 32 Operating hours: 23918h Processing hours: 11991h Including chip conveyor DMG EcoLine UNO 115 tool presetter Probe tool

Condition: used, Year of construction: 2013, 3-axis CNC machining center MTRent/MTCut V110, No. 131057, built in 2013, 30-station tool changer, chip conveyor, cooling units, SIEMENS Sinumerik 828D control system, weight approx. 6,900 kg Felir Ngjwczg Rjgsgb

Condition: like new (used), Year of construction: 2011, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, spindle speed (min.): 12,000 rpm, spindle speed (max.): 12,000 rpm, Machine-Details Stock-No. 1105-03805 Type of machine Machining Center - Vertical Make BRIDGEPORT HARDINGE Type GX 1000 Year of manufacture 2011 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Taiwan Delivery time immediately Freight basis ex stock HAGUENAU FRANCE Technical details x-travel 1000 mm y-travel 610 mm z-travel 610 mm control CNC FANUC OIMC table surface area 1150 x 540 mm rapid traverse 30/30/30 m/min turning speed range 12000 U/min power capacity - milling spindle 13 kW no. of tools in the magazine 30 Stück tool taper BT 40 Additional information CNC FANUC OIMC - Synchronised tappin - - RS-232 Interface mm) - higher tourque CHIP CONVOYER with 4 axis nikken includ Foleiz Didjir Nggjgb

Condition: used, Year of construction: 2008, x-travel 600 mm y-travel 450 mm z-travel 300 mm spindle tunring speed 42.000 U/min In our opinion, the machine is in good used condition and can be inspected under power by appointment. Equipment: - Extraction system, Keller - Pallet system, Röders RC 2 Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well Feliovza D Tor Nggjgb as prior sale!

Condition: used, Chiron FZ18W Magnum rotopallet 1999 CNC Siemens 840D X 630 Y 400 Z 425 tables (2) 850x450mm 20 tools ISO 40 / 18kW / 140 Nm 40m/min HAWE hydraulics automatic doors swarf conveyor 6 ton Fjlshkkwbsir Nggsgb 3,6 x 2,25 x 2,85 machine can be inspected under power in our warehouse Mimu Machine Tools (Italy)

Condition: good (used), Year of construction: 2007, MACHINE SPECIFICATIONS Brand JOHNFORD MODEL SV-48 CONTROL HEIDENHAIN 530 i TNC TABLE DIMENSIONS 1300X700 TRAVELS X, Y, Z X=1220 Y=710 Z=630 Fgolirsikv S Ne Nggeb BT TAPER 40 SPINDLE RPM 60-10000 TOOL CHANGER UP TO 24 pcs. CHIP EXTRACTOR YES YEAR 2007 EXTERNAL MEASUREMENTS 3200 X 3900 X 2490 WEIGHT 9500 KG

Condition: used, Year of construction: 2012, WAGNER WMC 1100 3-axis CNC machining center, No. MB 116442, built in 2012, 24-station tool changer, chip conveyor, SIEMENS Sinumerik 828D control system Fgelir Ngswczgkegsb

Condition: used, Year of construction: 2007, x-travel 1025 mm y-travel 550 mm z-travel 520 mm spindle tunring speed 10.000 U/min In our opinion, the machine is in good used condition and can be inspected condition and can be inspected under power by appointment. Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Changes and errors in the technical data and information as well as prior sale reserved. subject to prior sale Fjlirjvtgwwo Nggjgb

Condition: used, Vertical machining center CHIRON FZ08KW 2 pallet 15000 RPM HSK40A CNC Fanuc 21iM Felisumma Ior Nggegb The machine is visible in our warehouse in Gussago BS. M i m u Machine Tools Gussago BS Italy The machining center is a machine tool equipped with a numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several motion axles and one automatic tool exchange system and sometimes multiple pallets

Condition: good (used), Year of construction: 1999, CNC vertical machining center CHIRON type FZ 22 L Machining center with CNC control SIEMENS 840-D Series Traversing distance X: 2600 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free secondary positions 105 mm Tool-to-tool change speed 2.0 sec. Fgolirelp Rl Ae Nggeb Distance spindle - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Machine weight approx. 7.5 tons

Condition: good (used), Year of construction: 2007, WAGNER VMC 2040 L 3-axis CNC machining center (CHEVALIER QP2040-L), No. ML 964F08, built in 2007, with tool changer, chip conveyor, and SIEMENS Sinumerik control system Fgjlirswczgdo Nggjb

Condition: used, Year of construction: 2001, x-travel 550 mm Fgolijvtgw Dsr Nggob y-travel 500 mm z-travel 400 mm Control Siemens spindle tunring speed 12.000 U/min table surface area 1050 x 450 mm table load 500 kg In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: good (used), Year of construction: 2007, Axes X-axis travel mm: 700 Y-axis travel mm: 500 Fgjlielf Iyher Nggob Z-axis travel mm: 560 Working table Table dimensions mm: 800×500 Spindle Main spindle speed rpm: 12,000 Power Power kW: 22 Tooling system Tool magazine: 48 Cone BBT40 No. of pallets: 2

Condition: good (used), Year of construction: 2018, WAGNER WMC 800 L 3-axis CNC machining center, No. 1709006, built in 2018, 24-station tool changer, chip conveyor, SIEMENS Sinumerik 828D control system, weight approx. 5,000 kg Felswczf Toir Nggegb

Condition: used, Year of construction: 1999, x-travel 800 mm y-travel 650 mm z-travel 550 mm Control Mill Plus auto power on hours ca. 45.000 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Fslevdufdjir Nggsgb Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2015, x-axis 1250 mm y-axis 840 mm z-axis 550 mm control Siemens 840D turning speed range - main spindle 12000 min/-1 drive capacity - main spindle 22,5 kW Torque max. 140 Nm Number of tools 24 St. max. tool length 320 mm spindle taper HSK 63 Number of working hours 56000 h spindle hours 17500 h weight of the machine ca. 9,7 t This machine can be viewed under power by appointment and is in our estimation in very good condition. Furnishing: - IKZ - chip conveyor - Glass measuring rods in all axes - automatic door - Swivel axis with counter bearing, Fibro There are 5 identical machines available. The machines were used for light countersinking and drilling work. Changes and errors in the technical data and information, as well Subject to prior sale! Fgolisvdt Rfjr Nggjb