Used material testing for sale (476)

Condition: excellent (used), Espec Model: PL-2KPH ESPEC PL-2 KPH Climate Chambers, Air-Cooled Temperature range: -40°C to +180°C Humidity range: approx. 10 to 98% RH Dependence on temperature range and humidity fluctuations: ± 2.5% RH over time, ± 3.0% RH Internal dimensions (WxHxD): 500 × 750 × 600 mm External dimensions (WxHxD): 910 × 1590 × 973 mm Microprocessor control with 10 pre-set international test standards and 20 freely programmable memory slots, as well as built-in timer with programmable start/stop automation and error code display. Programming via touch screen. Alarm display (audible and visual). Device protection against overtemperature: Overtemperature protection with two switching contacts Illumination of testing chamber Operating hours counter Test chamber volume: 225 liters Net weight: 300 kg Electrical connection: 400 V 3/N 50 Hz, Plug: CEE 16 A, max. current: 11.0 A Refrigerant: R404A Scope of delivery: Espec climate test chamber Buyer information for your security: The following procedures are carried out in advance on the chambers we offer: 1. Functional inspection and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photos) (Specifications and technical details subject to change and errors!) If you have further questions, please feel free to contact us by phone. Hfjdpfxjx Iu I Ss Ahyjb

Condition: used, Year of construction: 2008, functionality: fully functional, • Manufacturer: inmess Gesellschaft für Industrie- und Messtechnik mbH • Manufacturer address (as stated on the nameplate): Frankfurter Str. 74, D-64521 Groß-Gerau, Germany • CE marking: Yes • Country of manufacture: Germany Machine Identification • Machine type (M/C Type): PLU • Machine number (M/C No.): 08-M-PLU-01 • Year of manufacture: 2008 Electrical Data (nameplate on the control cabinet) • Supply voltage: 3 × 400 V, 50 Hz • Control voltage: 24 V DC • Rated current: 12 A • Main fuse: 35 A • Rated connected load / Power: 6 kVA Weights • Machine weight (as stated on the nameplate): 1,900 kg Hfjdpfx Ajx Itu Dohyjb Construction and Design (visible and verifiable) • Enclosed machine housing with transparent safety guards • Integrated control cabinet mounted on the machine frame • Main control panel with push buttons, selector switches, and emergency stop button • Additional emergency stop button visibly installed on the control cabinet • Mechanical working area fully enclosed by safety devices • Central horizontal spindle unit mounted on a rigid yellow machine base • Opposing spindle/support unit visibly positioned on the same axis • Linear guide rails visible on the machine bed • Pneumatic lines present in the working area • Cable drag chain installed for protected cable routing Safety and Warning Instructions • CE conformity marking present • Laser warning symbol affixed to the machine frame • Emergency stop markings visible • Binder containing lockout/tagout operating instructions attached to the machine

Condition: like new (used), Binder VD 23 vacuum dryer, ex-demo, like new. Manufacturer's description: PRODUCT DESCRIPTION The BINDER VD series vacuum dryer ensures gentle drying and impresses with precise temperature control. The patented BINDER expansion shelves provide optimal heat transfer. The shelves can be freely positioned, and the chamber is easy to clean. KEY FEATURES Temperature range: Ambient temperature plus 9°C up to 220°C Controller with digital pressure and temperature display Program-controlled drying monitoring with automatic ventilation at the end of the process Internal data logger, measurement values available in open format, readable via USB 1 aluminum expansion shelf, individually positionable Inert gas connection DN 16 access port – for introducing external measuring instruments Safety glass window, spring-mounted with splash protection Large observation window, optionally with interior lighting PC interface: Ethernet 5 units in stock Hedpfjx S R A Tjx Ahyofb

Condition: excellent (used), RMS Vibration Test System Here we offer you a RMS electrodynamic vibration test equipment. Technical data: Sine:7,5 KN Noise:6,7 KN Shock:13 KN Displacement pk-pk:26 mm Speed: Sine 1,5 m/s noise 2,5 m/s Shock 2,5 m/s Acceleration:100g Cooling:air cooled Type : SW 3509 + amplifier TGD 6000-000.00 and fan total weight ca 4000kg Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Hjdpfxohylyme Ahyjfb Further questions we can answer on the phone for you. Written order possible by email or fax

Condition: like new (used), Year of construction: 2025, Binder M 400 from 2025, ex-display chamber oven in as-new condition Model M 115 | Drying and temperature chambers with forced convection and advanced programming capabilities Advantages: - Uniform temperature control thanks to the preheating chamber e™ - Identical test conditions throughout the entire usable volume, regardless of sample size and quantity - Excellent thermal insulation lowers operating costs - Advanced programming options Hodpfjxftb Nex Ahysfb PRODUCT DESCRIPTION With a maximum temperature of +300 °C and versatile programming features, the M series material testing chambers are perfectly suited for material testing as well as ageing tests. High airflow, provided by a powerful fan, enables rapid heating. KEY FEATURES Temperature range: +23°C above ambient temperature up to +300°C High temperature accuracy with e™ technology and increased heating power Reinforced fan with adjustable rotational speed Electromechanical exhaust air flap control Intuitive touchscreen controller with segmental time programming and real-time programming 2 chrome-plated wire shelves Independent, adjustable class 2 (DIN 12880) temperature safety device and independent class 3.1 (DIN 12880) temperature safety device with selectable visual/acoustic alarm on the controller Failsafe function – backup PT100 sensor Computer interface: Ethernet Internal data logger, measured values in open format readable via USB

Condition: good (used), Atlas Type: Xenotest Alpha LM High Energy Weathering tester Atlas Xenotest Alpha LM is a universal weathering instrument for testing the lightfastness and weathering resistance of materials under normal, high temperature and high performance conditions. XENOCHROME Filter XENOSENSIV gearbox Control of lamp power in W/m² Sample chamber temperature controlled up to 70 degrees Hfodpfxeuuarys Ahysb Measuring sensors at sample level XENOSENSIV E(300-400 nm) and SST Stationary sensor for sample chamber temperature and relative humidity Humidification Irrigation Water supply with integrated water tank Electronic version: 230V, 50/60Hz Absorption filter 7 IR: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Window glass 10 FG: Synchronization 40 - 110 W/m² Coil run 21 - 57 W/m² Absorption filter 4 IR + 3 window glass: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Absorption filter 6 IR + 1 UV: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Rel. electrical power without XENOSENSIV sensor: continuously regulated to the set value 53 - 120 % Sample chamber temperature: 20 - 70° (depending on selected filter configuration) Black standard temperature: synchronized 25 - 130 °C coiled 25 - 100 °C Relative humidity: 10 % - 95 % Fan revolutions: 500 - 2500 rpm Dimensions: 900 x 780 x 1800 mm Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: like new (used), Binder M 115 laboratory dryer – ex demo model from 2024 We offer a Binder M 115 laboratory dryer in ex demo condition, manufactured in 2024. The device was used only for demonstration purposes – it is fully functional, tested by the manufacturer and practically like new. The M 115 model is a precise laboratory dryer with forced air circulation, designed for fast and even drying and heat treatment of samples. Thanks to the possibility of programming work cycles, the device works well both in standard applications and in processes requiring repeatability and control of thermal conditions. Key parameters: • Year of manufacture: 2024 • Technical condition: ex demo – like new • Chamber capacity: 115 liters • Temperature range: from +10°C above ambient temperature to +300°C • Air circulation: forced (with fan) – fast and even temperature distribution • Controller with programming: possibility of setting cycles in real time or interval • Temperature protection: class 2 according to DIN 12880 • USB / Ethernet interface (depending on the version) for data logging Dimensions: • Interior (W × H × D): approx. 550 × 480 × 400 mm • External dimensions: approx. 710 × 790 × 605 mm • Power supply: 230 V, 50/60 Hz Hodswp Hm Nepfx Ahyjfb The device is ready for immediate use. Upon request, we will send photos, a test video and a price offer.

Condition: used, IMV Type: i240 + SA3AM Power Amplifier + Fan Dimensions Power Amplifier: SA3AM.i40 W x H x D 1234 x 997 x 720 mm Vibration Exciter: i240 W x H x D 580 x 1950 x 850 mm Technical Data: Armature Mass: 20 kg Armature Diameter: 290 mm Armature Resonance: 2300 Hz Hedpfew H N U Dox Ahyefb Permissible Eccentric Moment: 850 N·m Frequency Range: 0-2600 Hz. Maximum Force: 24 kN (sine and random) 48 kN (shock) Maximum Acceleration: 1200 m/s² (sine) 840 m/s² (random) 2400 m/s² (shock) Maximum Displacement: 100 mm p-p. Maximum Load Capacity: 400 kg. Ambient Conditions: Temperature 0-40 °C, Humidity 0-85 %RH. Maximum Output Power: 30 kVA (SA3AM-i40) + Shaker Armature 290 mm Usable up to 2000 Hz Weight: 410 kg (SA3AM-i40) Total weight approx. 2800 kg Condition: used Scope of delivery: (see picture) (Specifications subject to change and error!) For further questions, please contact us by phone.

Condition: excellent (used), Atlas Type: CI3000 F Atlas CI3000 Xenon Fade-Ometer The Ci3000+ Weather-Ometer and the Fade-Ometer with its advanced digital control systems, represent monumental achievements in the application of digital and optical technologies in easy-to-use laboratory weathering instruments. The 3000 series is recognized by many OEMs in the textile, paint, coatings and plastics industries as the exclusive platform for precise, reproducible and repeatable results, reproducible and repeatable life prediction results. Features: Type Climate Hsdpfx Aoucd Rbshyofb Test type Sunlight simulation Light source with xenon arc lamp Applications: Additives and colorants Adhesives and sealants Architecture and construction Automotive industry Food and beverages Graphics Packaging Paints and coatings Photovoltaics Plastics Textiles Wind and solar Consumer electronics Compressed air supply The CI3000 humidification system works with a compressed air ultrasonic spray nozzle. Before entering the system, the compressed air must be passed through a water/oil separator. The small air regulator in the Cİ3000 contains a second water/oil filter and a 5 micron solid filter. Make sure that a separate oil/water separator is installed and do not rely on the air regulator filter, as this is only designed as an additional device. Compressed air specifications Pressure 80-100 PSI (552-689 kPa) Flow rate 4 CFM (0.11 m³/min) Dimensions: Overall dimensions of the C13000 37.5 width X 29 depth X 72" height (95 width X 73 depth X 183cm height) Required footprint: 41.5 width X 80" depth (105 width X 203cm depth) Total weight: 404 kg Voltage: 380-220 V 38 A 50 Hz 〜3/N/PE 8 kW 404 kg Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2021, condition: excellent (used), Zwick / Roell Type: Mflow Application area: As testing volume increases, so does the need for a higher degree of automation (compared to the Cflow). The Mflow is a modularly expandable device that allows you to determine the Melt Mass-Flow Rate (MFR) and the Melt Volume-Flow Rate (MVR). The Mflow flow tester is, in its basic version, designed for MFR tests according to Method A and can be upgraded for MVR tests according to Method B. Testing according to the following standards is possible: - Methods A and B according to ISO 1133 - Methods A, B, and C according to ASTM D 1238 - ASTM D 3364 - JIS K 7210 Optionally, the Mflow can be equipped with pneumatic weight lift (with or without cleaning function) or weight placement. The Mflow can be operated either as a stand-alone unit using a modern touch display, or with ZwickRoell testing software via PC. Technical Data: Test load: 0.325 – 21.6 kg (depending on additional weights used) Compressed air (only required with optional pneumatic weight lift): 6 – 10 bar, oiled, dry Test temperature: +50 °C – +450 °C Display: capacitive touch display Temperature display resolution: < 0.1 K Temperature accuracy: < 0.3 K Number of storable parameter sets: > 100 Dimensions: - Height: 510 mm - Width: 360 mm - Depth: 419 mm Weight: approx. 43 kg Time measurement: - Error margin Method A: ± 0.02 s - Error margin Method B: ± 0.01 s Hfodpfxjtq Em Te Ahyob Displacement measurement (Method B): - Error margin: ± 0.02 mm (ISO 1133) - Resolution: < 0.005 mm PC connection: multi-device operation possible (up to 6 devices per PC) Power supply: 220 – 240 V / 50–60 Hz Power consumption: 2.6 A Software version: V4.2 Year of manufacture: 2021 Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical data and specifications!)

Condition: used, SincoTec Model: POWER FLOW BIAXIAL 125/150 kN ±4000 Nm SincoTec POWER FLOW BIAXIAL 125/150 kN – ±4000 Nm Servo-hydraulic Test Stand Description: For sale is a servo-hydraulic biaxial test stand SincoTec POWER FLOW BIAXIAL. The unit has been used in an industrial environment and was fully functional up to decommissioning. All service and maintenance were professionally performed. Comprehensive technical documentation (operating, assembly, and wiring manuals) is available. The test stand is suitable for tensile/compression tests, torsion tests, and combined loading tests on components and assemblies, e.g. for fatigue, durability, and functional testing. Main technical data for the test stand: - Maximum test force (design): up to ±150 kN - Typical operating rating: 125 kN - Max. torque (torsion): ± 4,000 Nm - Max. linear cylinder stroke: ± 75 mm - Max. rotation angle: ± 50° - Measurement accuracy: Class 1 (DIN EN 10002-3) Test stand dimensions: - Total height: approx. 3,430 mm - Width: approx. 1,480 mm - Depth: approx. 1,180 mm - Max. weight of clamping fixture: 250 kg Hydraulic power unit (included) - Drive power: approx. 152 kW - Flow rate: approx. 260 l/min - Operating pressure: up to 280 bar - Hydraulic oil: HLP ISO VG 46 - Tank capacity: approx. 1,500 liters Power unit dimensions: - Length: approx. 2,714 mm - Width: approx. 1,820 mm - Height: approx. 2,085 mm Electrical data: Control cabinet / test stand - 400 V / 50 Hz Hsdsx H Rtnjpfx Ahyofb - Connection: CEE 5-pin - Fusing: 16 A Hydraulic power unit - 400 V / 50 Hz three-phase current - Direct connection - Fusing: approx. 160 A Scope of delivery: - SincoTec POWER FLOW BIAXIAL servo-hydraulic test stand - Hydraulic power unit - Control cabinet with industrial PC - Measurement and control technology - Technical documentation The machine is structurally rated for up to 150 kN. The 125 kN specification refers to the typical operational configuration. Test stand weight: approx. 4.7 t Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photo) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Condition: used, SincoTec Type: POWER FLOW 100kN / 2000Nm Sincotec Power Flow 100 kN / 2000 Nm – Servo-hydraulic Test Stand – Fully Functional Description: For sale is a Sincotec Power Flow servo-hydraulic test stand from an industrial operation. The system is ideally suited for dynamic and static testing of components and assemblies, e.g., in the automotive, mechanical engineering, or research sectors. Technical Highlights: - Max. test force: 100 kN (up to ±150 kN) - Max. torque: ±2000 Nm (up to ±4000 Nm) - Linear stroke: ±50 mm (max. ±75 mm) - Max. rotation angle: ±50° - Servo-hydraulic control - Control via Sincotec TestPilot / CoPilot software - Includes large hydraulic power unit Dimensions & Test Stand: - Test table: approx. 1.20 × 1.00 × 1.20 m (H) - Total stand height: approx. 3.30 m Hydraulic Power Unit (separate): - Height: 2085 mm Hfedpox H Ndljfx Ahyeb - Length: 2714 mm - Width: 1820 mm Fully functional before dismantling Power Supply / Electrical (from nameplates): - Single units / Motors - 230 V / 50 Hz - Drain oil pump: 0.18 kW / 1.5 A - 400 V / 50 Hz (three-phase current) - Traverse: 0.25 kW / 0.79 A - Total weight: approx. 3000 kg Important note: "The table shown in the photos is not included in the scope of delivery." Condition: used Delivery includes: (see photos) (Specifications and details subject to change or error!) For further questions, feel free to contact us by phone.

Condition: used, Year of construction: 2022, LDS / Brüel & Kjær V780 Vibration Test Stand incl. HPA-K Amplifier – Vibration Test System Description: For sale is a professional electrodynamic vibration testing system from LDS / Brüel & Kjær, comprising the V780 shaker, HPA-K / 780 power amplifier, cooling fan, as well as extensive accessories and original documentation. The system is designed for precise vibration, environmental, and durability testing of components and assemblies, making it ideal for use in industry, research, development, and quality assurance. The shaker enables testing from DC to 4,000 Hz with sinusoidal or broadband excitation. Test specimens of up to 100 kg can be mounted directly on the armature. Technical Highlights - Max. Sine Force: 5,115 N - Frequency Range: DC – 4,000 Hz - Max. Test Load: 100 kg - Amplifier Output: 5 kVA - Total Power Consumption: 7.1 kVA - Power Supply: 3-phase 380–500 V - Accurate Laboratory and Industrial Configuration - Genuine LDS / Brüel & Kjær Quality Hedpox Hx Nkefx Ahyofb Important Note: "The table shown in the photos is not included in the sale." Weight: approx. 6,700 kg Condition: used Scope of Delivery: (see pictures) - LDS V780 shaker - HPA-K / 780 power amplifier - Cooling fan - Controller / electronics - Cables, adapters, accessories (see pictures) - Original manuals & documentation (Subject to changes and errors in the technical data and specifications!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Weiss Model: WK11-1000/40 For sale is a professional Weiss Umwelttechnik WT-WK 1000/40 climate test chamber with fully automatic cold-regenerating adsorption dryer. The installed fixtures in the test chamber can be removed if required. Currently, due to these fixtures, the control cabinet is limited to a temperature range of −40°C to +60°C. Once the fixtures are removed, the manufacturer can expand the temperature range back to the standard values of −40°C to +180°C, as the fixtures are not suitable for these higher temperatures. This equipment is ideal for precise temperature and humidity testing on components, assemblies, and devices. It is perfectly suited for applications in industry, development, quality assurance, and research. Weiss Climate Test Chamber – Water Cooled Data for Temperature Tests: - Temperature range: −40°C to +60°C - Temporal temperature fluctuation (at center of usable space): ± 0.1 to ± 0.5 K - Spatial temperature deviation: ± 0.5 to ± 2.0 K - Temperature change rate: - Heating: 4 K/min - Cooling: 3 K/min Data for Climate Tests: - Temperature range: +10°C to +95°C - Humidity range: 10 to 98 % r. H. - Temporal temperature fluctuation (at center): ± 0.1 to ± 0.3 K - Spatial temperature deviation: ± 0.5 to ± 1 K - Temporal humidity fluctuation (at center): ± 1 to ± 3 % r. H. - Thermal compensation: - In the range of +25°C to +95°C Hsdpfx Ahsx Hxkzoyefb - At a relative humidity of up to 90%, 500 W Humidification System Data: - Reservoir volume: 20 l - Water quality: demineralized - pH value: 6 to 7 - Conductivity: 5 to 20 μS/cm³ - Water consumption at constant +40°C, 92% r. H.: 21/24 h - Temperature gradient: - (according to IEC 60068-3-5): 1 to 2 K Test Chamber Dimensions: Height: 950 mm, Width: 1100 mm, Depth: 950 mm External Dimensions: Height: 1980 mm, Width: 1385 mm, Depth: 1850 mm Test Chamber Volume: approx. 990 liters Nominal Voltage: 3/N / PE AC 400 V +10% 50 Hz Nominal Power: 11.5 kW, Nominal Current: 22.0 A Refrigerant: R 404A Weight: 840 kg Important information for your safety as a buyer! The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See image) (Technical data subject to modifications and errors!) Further questions can be answered via telephone.

Condition: excellent (used), Vötsch Model: VT 7012 S2 Water-cooled Two-chamber configuration Hot chamber: Temperature range of hot chamber: +50°C to +220°C Temporal temperature deviation at the center of useful space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 11 K/min Cold chamber: Temperature range of cold chamber: -74.5°C to +70°C Temporal temperature deviation at the center of useful space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Test chamber dimensions: width 470 mm, depth 650 mm, height 410 mm External dimensions: width 930 mm, depth 2115 mm, height 1970+ mm Port diameter: 67 mm Voltage: 3/N/PE AC 400V +6/-10% 50Hz Rated power: 10 kW Rated current: 25 A Refrigerants: R-452A / R-23 Weight: 1000 kg Important safety information for buyers: The following actions are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Recharging with legally compliant refrigerant 3. Leak test with certificate 4. After a successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical data and specifications!) Hsdpfsx Hhfhox Ahyefb We are happy to answer further questions by phone.

Condition: excellent (used), Vötsch Type: VC³ 7018 Vötsch Air-Cooled Climatic Test Chamber Temperature Test: Temperature Range: -70°C to +180°C Temperature Rate: Heating 4 K/min Temperature Rate: Cooling 3 K/min Climatic Test: +10°C to +95°C Humidity Range: 10% to 98% RH F. Temperature deviation over time: ± 0.1 to ± 0.3 K Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1550 mm x Height 1800 mm Test chamber volume: 190 liters Nominal voltage: 400 V Nominal current: 14 A Nominal power: 5.5 kW Heat compensation 1500 W (at 20+) Weight: approx. 460 kg For your safety, please note the following information! The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant Hfjdsx Hg Uuopfx Ahyob 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch Type: VT³ 7006 S2-M Water-cooled Technical Specifications: Maximum specimen weight: 20 kg Test chamber volume: 60 liters Test chamber internal dimensions: Width 380 mm, Depth 430 mm, Height 370 mm External dimensions: Width 875 mm, Depth 1970 mm, Height 1895 mm Vertical arrangement of hot and cold chambers (chamber change via lift carriage) Temperature range of hot chamber: +50 °C to +220 °C (calibration value +125 °C) Temperature range of cold chamber: -80 °C to +70 °C (calibration value -40 °C) Uniform temperature distribution in the test chamber (±0.5 K to ±2.0 K) Temporal temperature deviation: ±0.3 K to ±1.0 K 80 mm duct for measurement/supply connections to the specimen SIMCONTROL software for operation and status display Voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 8.5 kW Rated current: 25 A Refrigerants: R-404A, R-23 Weight: approx. 800 kg Important information for your safety as a buyer! The following points are carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if required 3. Leak test with certificate Hodpfsx Hglyjx Ahyofb 4. Following successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and information subject to change or error!) Should you have any further questions, we are happy to answer them by phone.

Condition: excellent (used), Thermo Scientific Vötsch Type: UT 6420 Hsdsx Hf Uajpfx Ahysfb For sale is a professional laboratory and industrial drying oven / heating cabinet, Thermo Scientific / Vötsch Industrietechnik – Type UT 6420. This unit is suitable for drying, heating, tempering, and heat treating materials and components at precisely controlled temperatures up to 300 °C. Typical areas of application include laboratory, industry, workshop, research, electronics, and materials testing. The stainless steel chamber ensures uniform heat distribution and is designed for continuous operation. Chamber: Stainless steel with insertion racks External dimensions (approx.): 170 × 70 × 80 cm (H × W × D) Technical specifications: Manufacturer: Thermo Scientific / Vötsch Industrietechnik Type: UT 6420 Max. temperature: 300 °C Temperature control: Electronic (Heraeus Kelvitron) Rated voltage: 3/N/PE 400 V, 50/60 Hz Rated current: 6.6 A Power consumption: approx. 4.2 kW Protection class: IP20 Weight: approx. 200–230 kg Condition: used Scope of delivery: (see photo) (Specifications are subject to change and errors; details are non-binding!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the advanced safety and performance test package “P Plus”. This device is not a standard laboratory incubator but a high-quality safety test chamber, specifically designed for aging, performance, and safety testing of lithium-ion energy storage systems. Key Added Value: The unit is designed to reliably detect, monitor, and contain critical battery events safely—including up to EUCAR Hazard Level 5 (fire/flames, no explosion). What can the device do specifically? (Section 2 – Performance & Application) – Conduct aging tests on lithium-ion cells – Performance tests (charge/discharge cycles under temperature) – Continuous temperature runs and thermal cycling tests – Testing of non-energized and cyclically energized cells – Reproducible, precise temperature control throughout the entire usable space – Safe execution of tests under realistic thermal conditions – Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: – Battery & cell manufacturers – Research and development laboratories – Test laboratories & safety testing – Automotive / e-mobility / energy storage sectors The P Plus package transforms the KB 720 into a genuine battery safety test cabinet: Integrated Safety Features: Hfjdpjx Hf A Refx Ahyjb – Automatic & manual CO₂ fire suppression system – Smoke detector with optical & acoustic alarm – Mechanical double door locking (secure containment) – Spark protection in the interior compartment – Exhaust connection with reversible overpressure flap – Connections for external inerting (e.g., nitrogen) – Emergency stop / manual release of extinguishing system – Ports for charging and measurement cables Result: The device is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames can occur, but not explosion or uncontrolled propagation. This is not an abuse or destruction test device, but a secure, standard-compliant test chamber for real-world operating and fault scenarios. Technical Core Data: – Temperature range: –5 °C to +100 °C – Interior volume: approx. 698 liters – Shelves: 4 × stainless steel – Max. load per shelf: 45 kg – Max. total load: 100 kg Electrical Data: – Mains connection: 200–240 V AC – Frequency: 50/60 Hz – Phases: single-phase – Power consumption: approx. 2.1 kW – Circuit protection: 16 A – Refrigerant: R134a – Protection class: IP 20 Dimensions & Weight: – External (W × H × D): approx. 1250 × 1950 × 900 mm – Internal (W × H × D): approx. 970 × 1250 × 576 mm In short – why is this device special? – Genuine battery safety test chamber – Suitable for EUCAR Hazard Level 5 – Integrated CO₂ extinguishing system – Large chamber (≈700 l) – High market value & resale attractiveness – Weight: approx. 285–300 kg – Condition: used – Scope of delivery: (see image) (Technical data subject to change and errors excepted!) For further questions, we are happy to answer your call.

Condition: excellent (used), Dr. Hönle Dr. Hönle UV Technology – Bluepoint LED High-Power + Bluepoint 2 easycure – Complete System incl. LED Spots & Manuals For sale is a complete UV curing system by Dr. Hönle, consisting of two control units and several LED spots. Ideal for professional applications in electronics manufacturing, medical technology, optics, plastics processing, and laboratory operations. Description: The system includes: - Bluepoint LED High-Power Control Unit (REF 45250.c) - Bluepoint 2 easycure Control Unit (REF 33900.a) - Several UV LED spots (e.g., 365 nm, air-cooled) - BP-LED 4-1 Adapter (REF 45970.a) – for controlling up to 4 spots - Original operating manuals + CD The units enable precise control of exposure time, intensity, and energy – ideal for reproducible industrial UV curing processes. Technical Data: Bluepoint LED High-Power (45250.c): - Power supply: 36 V / 5.5 A Hfjdpfx Ahex E T Uxeyjb - Control for up to 4 LED spots - Adjustable UV intensity - Timing programs and energy measurement Bluepoint 2 easycure (33900.a): - 230 V AC, 50 Hz - 570 VA power consumption - High-performance LED control - Industrial quality, Made in Germany Total Dimensions/Weight: approx. 12–15 kg Important Note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photo) - Bluepoint LED High-Power - Bluepoint 2 easycure - LED spots (air-cooled) - BP-LED 4-1 adapter - Operating manuals - CD - Original documentation (subject to changes and errors in technical data and information!) We are happy to answer further questions by phone.

Condition: excellent (used), CTS Type: T-40/600 Water-cooled Temperature Test Chamber Hfodox E Tq Tjpfx Ahyeb Control System: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numeric input for set values - Error messages in plain text - RS 232 interface - Free switching channels for user-specific test item control Technical Specifications Temperature Testing: Temperature range: -40°C to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Heat dissipation: Approx. 2500 W at +20°C Approx. 2500 W at 0°C Approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test specimen, no radiation, and without additional equipment. Dimensions: Test volume: 600 liters Test chamber dimensions (H x W x D): approx. 850 mm x 850 mm x 830 mm External dimensions (H x W x D): approx. 1900 mm x 1120 mm x 1875 mm Operating Data: Power connection: 400 V +6/-10%, 3/N, 50 Hz Rated power: 7.1 kW Rated current: 12.3 A Protection class: IP 22 Weight: approx. 700 kg Refrigerant: R-452A / R23 For your safety as a buyer, please note the following procedures are performed on all chambers offered: 1. Functional inspection and replacement of necessary components 2. If needed, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of supply: (See picture) (Specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Vötsch Type: VT 7012 S2 Water-cooled Hot Chamber: Hfedjx E Tkaepfx Ahyjb Temperature control range of the hot chamber: +50°C to +220°C Temporal temperature deviation at the center of the usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate Heating: 11 K/min Cold Chamber: Temperature control range of the cold chamber: -80°C to +70°C Temporal temperature deviation at the center of the usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Test chamber dimensions: width 470 mm, depth 650 mm, height 410 mm External dimensions: width 930 mm, depth 2115 mm, height 1970+ mm Port ∅ 67 mm Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 10 kW Rated current: 25 A Refrigerant: R404A / R23 Weight: 1000 kg Important information for your security as a buyer! The following work is carried out on our listed chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After a successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and error!) Should you have further questions, we will be happy to answer them by phone.

Condition: excellent (used), Vötsch Model: VCS³ 7034-5 Vötsch Climate Test Chamber, Water-Cooled With temperature change rate of 5 K/min Specifications for temperature testing: Temperature range: -70°C to +180°C Temporal temperature deviation in the center of the usable space: ±0.1 K to ±0.5 K Spatial temperature deviation: ±0.5 K to ±2.0 K Temperature change rate: Heating: 6.8 K/min Cooling: 6.7 K/min Specifications for climate testing: Temperature range: +10°C to +95°C Temporal temperature deviation in the center of the usable space: ±0.1 K to ±0.3 K Spatial temperature deviation: ±0.5 K to ±1.0 K Temporal humidity deviation in the center of the usable space: ±1% to ±3% RH Humidity range: 10% to 98% RH (Extended climate range: 2°C/95% RH regulated for a maximum of 2 hours) Exterior dimensions (W x D x H): 870 x 1700 x 1775 mm Test chamber dimensions (W x D x H): 580 x 765 x 750 mm Test chamber volume: approx. 335 liters Side ports: 50 mm and 125 mm Operating data: Hfedpfx Ahjx Elt Hsyob LED strip 24 V, 6.8 W / 2 x halogen bulbs 24 V, 50 W Rated voltage: 3/N/PE AC 400 V ±10%, 50 Hz Rated power: 9 kW Rated current: 20 A Customer-side fuse: 63 A slow-blow Refrigerant: R404A / R-23 Weight approx. 570 kg For your security as a buyer, please note the following: The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if needed 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see image) (Technical data and information subject to change and errors!) Further questions can be answered by phone.

Condition: excellent (used), CTS Model: C-40/350 Air-cooled climate test chamber Hfedpfxox Ekupe Ahysb For sale is a professional CTS climate test chamber, model C-40/350. This unit is designed for demanding environmental simulations in industrial applications and is ideal for material testing, electronics, automotive, aerospace, and research. Temperature Testing: - Temperature range: -40°C to +180°C - Temperature deviation: ≤ ±0.3 K over time - Temperature change rate according to IEC 60068-3-5: * Heating: 3.5 K/min * Cooling: 4 K/min - Heat compensation: * approx. 3500 W at +20°C * approx. 2000 W at -20°C Climate Testing: - Temperature range: +10°C to +90°C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to 78°C - Temperature deviation: ≤ 1.0 K over time - Humidity deviation: ≤ ±3.0% r.h. over time The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect performance data. Technical Specification: - Refrigeration unit: air-cooled, low-noise, fully hermetic, variable power control by electronic monitoring and control system, environmentally friendly refrigerant R404A - Test chamber: * Floor loading: 150 kg/m² * Shelving grid: stainless steel, support area 620 x 600 mm * Max. load per shelf: 35 kg * Max. total load with maximum shelves: 100 kg Control System: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numeric input for setpoints - Plain-text error messages - RS 232 interface - Ethernet interface - Free switching channels for external test item control Dimensions: - Test chamber volume: 350 liters - Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm - External dimensions: Height 1800 mm × Width 850 mm × Depth 1640 mm Operating Data: - Electrical connection: 400V 3/N, 50 Hz - Rated power: 7.1 kW - Rated current: 11.5 A - Protection class: IP 54 - Sound pressure level: (value not specified)

Condition: excellent (used), Weiss Type: WT11-1300/70/15/S Weiss Umwelttechnik Temperature Chamber WT11-1300/70/15/S 1300 litres –70°C to +180°C – 44 kW – Industrial Unit Water-cooled For sale is a professional temperature chamber from Weiss Umwelttechnik. This unit is engineered for demanding environmental simulation in industrial applications and is ideal for material testing, electronics, automotive, aerospace, and research sectors. The test chamber offers extremely rapid temperature changes and a large test volume. Technical data: Model: WT11-1300/70/15/S Test chamber volume: 1300 litres Temperature range: –70 °C to +180 °C Heating rate: up to 15 K/min Cooling rate: up to 15 K/min Temperature deviation: over time ±0.3–0.8 K / spatial ±0.5–2 K Humidity range (optional): 10–95 % rh, +10 to +95 °C Sound pressure level: approx. 73 dB(A) Electrical data: Voltage: 3/N/PE AC 400 V ±10 % Rated power: 44 kW Rated current: 63 A Refrigerants: R404A (14.0 kg) R23 (5.4 kg) Pressure stages: ND 18 bar / LP 19 bar / HD 25 bar External dimensions: Overall width: approx. 3,200 mm Overall depth: approx. 2,125 mm (1,385 mm housing + 740 mm door area / radius when open) Overall height: approx. 2,020 mm Internal dimensions – test area: Hfsdpfsx Eknpox Ahyeb Inside width: approx. 1,000 mm Inside depth: approx. 1,060 mm Inside height: approx. 1,230 mm Equipment: Test chamber made from stainless steel 1.4301 Viewing window in the door Touch panel control Ports: R1: 125 mm L1: 50 mm Connection for automatic water top-up Chilled water inlet & outlet connections Overflow/condensate connection Safety monitoring & alarm system Ideal for: Automotive / E-Mobility Aerospace Research & Development Electronics testing Materials laboratory / Quality assurance Volume: 1300 litres Weight: approx. 1,900 kg For your security as a buyer, the following steps are carried out on all chambers we offer: 1. Functional test and replacement of required components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted.) Please feel free to contact us by phone for further questions.