Used material testing for sale (490)

Condition: excellent (used), CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed to perform simultaneous temperature and humidity testing on multiple test specimens. Device Description: This climate test chamber enables testing of the functionality and material properties of a test item under temperature and humidity influences. Efficient air circulation with a high recirculation volume ensures optimal heat transfer to the test items. The air conditioning compartment is located at the rear of the chamber interior. The refrigeration units are situated behind the chamber in a separate frame, providing good accessibility. Control systems are housed in a separate control cabinet, with the operating panel integrated into the cabinet door. For dehumidification of the test chamber, the system includes a self-regenerating compressed air dryer. An integrated blower allows the test chamber to be flushed with fresh air. Technical Specifications: Temperature Testing: • Temperature range: -60 °C to +100 °C • Temperature deviation: ±0.5 to 1 K over time • Rate of temperature change (measured in supply air, linear with specimen and radiant heat): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Rcsdpfjx Eabpsx Agzjk Climatic Testing: • Temperature range: +10 °C to +90 °C • Humidity range: 10% to 95% relative humidity • Dew point range: +5 °C to +89 °C • Temperature deviation: ±0.5 K over time • Humidity deviation: ±1 - ±3% r.h. over time All technical values refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimens, without radiant load, and without ancillary equipment. Dimensions: Internal (Test/Clear Space): Volume approx. 5,500 liters (5.5 m³); Internal dimensions (approx.): Height ~2,000 mm, Width ~2,000 mm, Depth ~1,400 mm (slight variation depending on configuration) External: Height ~2,300–2,500 mm, Width ~2,300–2,600 mm, Depth ~1,700–2,200 mm (depending on doors, frame, accessories, etc.) Operating Data: • Power supply: 400 V +6/-10%, 3/N, PE, 50 Hz • Rated power: 58.3 kW (incl. 5 sockets) • Rated current: 86.0 A • Protection class: IP 54 Technical Features: • Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless capacity control via electronic monitoring and control system • Refrigerants: environmentally friendly R23 / R404A Remarks: • Inspection possible by prior arrangement (location: 46325 Borken) • Shipping by freight carrier available – costs and arrangements on request • Scope of delivery: (see image) (Subject to modifications and errors in the technical data and information.) For further questions, feel free to contact us by phone.

Year of construction: 1970, condition: used, Technical details: x-travel: - mm y-travel: - mm z-travel: - mm workpiece weight: 800 kg machine weight approx.: 0,75 kg dimension machine xH: 1,2 x ,08 x 2,0 m The impact toughness is a measure of how resistant a material is to sudden, impact loads, especially when it has a notch (kerf) beforehand. It is mainly used for metals to assess fracture toughness under dynamic loading. Rsdpfjxu Dwysx Agzock *

Year of construction: 2013, condition: good (used), Universal testing machine Zwick/roll Type: 1488 Modernized in 2013 with software Rcjdpjxw N Uvsfx Agzek Test force max.: 200 kN Required space: width: 2,000 mm, height: 2,100 mm, depth: 800 mm, weight approx. 1,000 kg.

Condition: good (used), Material tester - Height: 100cm - Width: 120cm - depth: 75cm - up to 300T Good condition fully functional can be viewed and tried on site. Shipping also abroad. Viewing : Basically, I would like to point out that to avoid misunderstandings, the item is welcome to be inspected and tested under power before purchase. Please ask questions before buying to avoid ambiguity. For general questions or to make an appointment for a viewing, I am, at the phone number below or above, always available. Redpfx Agjh E Egnszjck Errors in the description and subject to prior sale. VAT is shown separately on my invoices. Shipping with forwarding agent.

Condition: used, Year of construction: 2001, functionality: fully functional, total length: 1,000 mm, Used Mahr 828 length measuring machine incl. accessories – immediately available We are offering a very well-maintained used measuring machine from the brand Mahr, type 828 (direct measuring path 0–200 mm, travel 1000 mm), including comprehensive accessories and a PC software package for the calibration of dial gauges, limit plug gauge sets, rings, etc. Operation & condition: The machine is in ready-to-operate condition, has been regularly used and maintained. Inspection and demonstration can be arranged by appointment if interested. Rcjdpfjxvb Hhex Agzjk

Condition: used, functionality: fully functional, Year of construction: 2015, Various clamping devices silver 10kN opening range 0-8mm jaws WxH 60x40mm Brown wedge clamp 25kN opening range 0-10mm jaws with serrated teeth WxH 60x100mm Pneumatic clamping device green with control unit 5kN opening range 0-10mm jaws 75x25mm 50x25mm 25x25mm Wedge clamp 100kN green opening range 0-13mm jaws with serrated profile WxH 50x75mm connection 31/12 Rcedexgh Igjpfx Agzek

Condition: excellent (used), Year of construction: 2022, Bareiss Bareiss digi test II Hardness Testing Device – Year of Manufacture 2022 – Shore A/B/0 + Accessories Item Description: For sale is a complete Bareiss digi test II hardness testing system, year of manufacture 2022, in very good condition. The device is designed for precise and automated hardness measurement of elastomers, rubber, and soft plastics according to Shore standards (Shore A / B / 0). The system is fully functional, comes from a laboratory environment, and has only been used rarely. All plates, serial numbers, and manufacturing data are present. Made in Germany. Typical areas of application: - Quality control in industry - Laboratory and material testing - Testing according to DIN EN ISO / ASTM standards - Serial measurements with reproducible results Technical data: Input voltage: 110–240 V AC, 50–60 Hz Power consumption: max. 20 VA Measuring method: Automatic hardness tester according to Shore A/B/0 Origin: Made in Germany Important note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (See picture) - Bareiss digi test II control unit Rsdpfx Aox D U T Regzeck - Motorized test stand / measuring module type DTAA II - Rotofix adapter for sample fixation - Original operating manual - Three Bareiss accessory cases including inlays (Subject to changes and errors in technical data and information!) We are happy to answer further questions for you by phone.

Year of construction: 2013, condition: used, Ask for additional details! 2 units available. Rcsdsx Nih Aepfx Agzek

Condition: used, Year of construction: 1980, functionality: unexamined, machine/vehicle number: GTTS 220, total height: 144 mm, total length: 135 mm, total width: 96 mm, Equipment: documentation/manual, Used Votsch/Weiss GTTS 220 Climate Chamber Manufacturer: Votsch/Weiss Model: GTTS 220 | 20 External dimensions: 135cm x 96cm x 144cm (length x width x height) Max internal dimensions: 65cm x 92cm x 54/40cm (width x depth x height) Voltage: 220/380 V Refrigerant type: R12 Rcsdpfx Agjx H N Drszek Includes manual (installation and operation handbook)

Year of construction: 2010, condition: excellent (used), Mastersizer Hydro 2000S The analyzer has been serviced annually. Condition: very good. Ready for operation. Technical data: Particle size analyzer for liquids, Malvern Mastersizer 2000 with Hydro 2000S module. The Hydro 2000S module can circulate between 50 ml and 150 ml of liquid. Variable pump/mixer speeds allow for suspension and circulation of particles of varying sizes and densities, while the variable-power ultrasonic system enables the dispersion of particle agglomerates. The Mastersizer 2000 measures particle sizes in the sample and displays their distribution on a computer graph. Measurement takes place as particles pass between the detector array and the laser. Hydro 2000S specifications: Voltage: 220-240 V, 50-60 Hz Power: 240 VA Maximum particle size: 600 µm Mastersizer 2000 specifications: Voltage: 240 V, 50-60 Hz Power: 60 VA Particle size range: 0.02 µm to 2000 µm Lasers: Bxzqjbv8Dy Red: gas laser, wavelength 633 nm Blue: LED, wavelength 466 nm This product consists of two separate units: Mastersizer 2000, Hydro 2000S, software included Rodox Niiyspfx Agzock Mastersizer external dimensions (W x D x H): 133 x 30 x 40 cm Hydro 2000S external dimensions (W x D x H): 34 x 35 x 34 cm

Condition: good (used), Year of construction: 2008, functionality: fully functional, A used agglomerator from WEISS is being offered. Model: RL 900/2. Motors: 2 x 110 kW. Rcjdpfx Ajxl Rw Uogzsk

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: 59 226 035 580 030, Type: SC/KWT 450 Salt Spray Chamber Technical Data: - Test chamber volume: 450 liters - System weight: 140 kg (test chamber + machine unit; without brine and without test specimens) - Brine reservoir: 180 liters - Maximum load: 100 kg, 8 kg per support rod - External dimensions: Height without hood 920 mm, height with hood 1370 mm, width 1930 mm, depth 800 mm - Test chamber dimensions: Height 740 mm, width 850 mm, depth 570 mm - Control unit: Simcon/32 - Condition: used - Operating hours: 22,914 h Connection Data: - Voltage: 1/N/PE AC 230V ±10% 50Hz - Rated power: 2.0 kW Rjdpox Ig Tmefx Agzjck - Rated current: 8.5 A - Power consumption: 450 Wh/h - Brine consumption: approx. 0.5–1 liter per hour - Compressed air consumption: approx. 1.5 m3/h at 0°C and 1 bar - Deionized water consumption: approx. 0.4 liters per hour Application Areas: - Salt spray test in accordance with DIN 50021 - Condensation water test in accordance with DIN 50017 - Standard climate (ventilation): DIN 50014 The system has been serviced and calibrated annually by the manufacturer, with no outstanding repairs (full maintenance contract). Last maintenance/calibration/DGUV3 inspection: 03/2025. The system will remain connected until week 3 and can be inspected during this time. All installation and operating manuals as well as the service manual are available.

Condition: excellent (used), CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed to perform simultaneous temperature and humidity testing on multiple test specimens. Device Description: This climate test chamber enables testing of the functionality and material properties of a test item under temperature and humidity influences. Efficient air circulation with a high recirculation volume ensures optimal heat transfer to the test items. The air conditioning compartment is located at the rear of the chamber interior. The refrigeration units are situated behind the chamber in a separate frame, providing good accessibility. Control systems are housed in a separate control cabinet, with the operating panel integrated into the cabinet door. For dehumidification of the test chamber, the system includes a self-regenerating compressed air dryer. An integrated blower allows the test chamber to be flushed with fresh air. Technical Specifications: Temperature Testing: • Temperature range: -60 °C to +100 °C • Temperature deviation: ±0.5 to 1 K over time • Rate of temperature change (measured in supply air, linear with specimen and radiant heat): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: • Temperature range: +10 °C to +90 °C • Humidity range: 10% to 95% relative humidity • Dew point range: +5 °C to +89 °C • Temperature deviation: ±0.5 K over time • Humidity deviation: ±1 - ±3% r.h. over time All technical values refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimens, without radiant load, and without ancillary equipment. Dimensions: Internal (Test/Clear Space): Volume approx. 5,500 liters (5.5 m³); Internal dimensions (approx.): Height ~2,000 mm, Width ~2,000 mm, Depth ~1,400 mm (slight variation depending on configuration) External: Height ~2,300–2,500 mm, Width ~2,300–2,600 mm, Depth ~1,700–2,200 mm (depending on doors, frame, accessories, etc.) Operating Data: • Power supply: 400 V +6/-10%, 3/N, PE, 50 Hz • Rated power: 58.3 kW (incl. 5 sockets) • Rated current: 86.0 A • Protection class: IP 54 Technical Features: • Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless capacity control via electronic monitoring and control system • Refrigerants: environmentally friendly R23 / R404A Remarks: • Inspection possible by prior arrangement (location: 46325 Borken) • Shipping by freight carrier available – costs and arrangements on request Rcedpfx Aex D Abpjgzok • Scope of delivery: (see image) (Subject to modifications and errors in the technical data and information.) For further questions, feel free to contact us by phone.

Year of construction: 2008, condition: used, VP2000 chamber (equivalent to the Pharma 2000 model) equipped with the Simpac controller. Rcedjx Nihcopfx Agzek

Condition: excellent (used), Shimadzu Shimadzu EZ-LX Universal Testing Machine + Trapezium X Software – 5 kN For sale is a professional materials testing machine from Shimadzu, model EZ-LX from the EZ-Test series. This system is suitable for performing tensile, compression, and flexural tests on a wide range of materials. The machine comes complete with a PC system, monitor, keyboard/mouse, Trapezium X software (version 1.5.1), and comprehensive documentation. Ideal for laboratory, research, quality assurance, or training applications. Features of the device: - Tensile and compression testing up to 5 kN - Precise measurement of force and displacement - Fully automatable test sequences - Creation and analysis of diagrams & test reports - Emergency stop button and safety functions - Operation via PC with installed software Technical data: - Model: Shimadzu EZ-LX - Power supply: 200–230 V - Frequency: 50/60 Hz - Power consumption: 850 VA - Fuse: 250 V / 5 A (slow-blow) - Force capacity: 5 kN - Dimensions: approx. 70 × 50 × 150 cm - Weight: approx. 55 kg Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery (see picture): - Shimadzu EZ-LX testing machine Rcjdpfx Agox Dbixezok - PC (Lenovo) incl. monitor, keyboard & mouse - Installed Trapezium X software - Original manuals and documentation - Connection cables (Subject to changes and errors in the stated specifications!) Please feel free to contact us by phone with any further questions.

Condition: used, Instrument Systems Instrument Systems LED Testing Laboratory CAS140C, LEDGON 100, Integrating Sphere, Keithley 2611 – Complete System! Rcedpox Da Awefx Agzsk For sale is a complete, professional LED measurement laboratory from Instrument Systems (Konica-Minolta Group). The system is suitable for precise optical and electrical characterization of LEDs, LED modules, and small luminaires. All devices are from a laboratory environment, manufactured in 2007–2008, featuring high-quality industrial measurement technology. Scope of delivery / Included components - CAS 140C-152 spectrometer (2008) - Integrating sphere ISP250-110 & ISP250-211 (2008) - LEDGON 100 goniophotometer (2007) - CSD315 3-axis controller + emergency stop control panel (2007) - Keithley 2611 SMU / SourceMeter - PC system including software: - SpecWin Pro - SpecWin Light - Goniometer module - Original license CDs - User manual "LED test sockets" - Cables & accessories as per photos Technical features - Measurement of total luminous flux (lumens) - Spectral analysis (color temperature, CRI, chromaticity coordinates xy, spectrum) - Goniophotometric angular measurement - Analysis of radiation characteristics - Electrical control and IV measurements with Keithley 2611 - Fully automated test procedures with SpecWin Pro CAS140C: approx. 36×15×30 cm / 7–9 kg Integrating sphere: approx. 40×40×45 cm / 6–8 kg LEDGON 100: approx. 80×30×28 cm / 12–15 kg CSD315: approx. 42×12×35 cm / 5 kg Keithley SMU: approx. 36×9×28 cm / 5 kg Total dimensions/weight: approx. 40–45 kg Important note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors!) For further questions, feel free to contact us by phone.

Condition: used, Zwick tensile testing machine Model: Z20 Controller: BX1-EZ020.A4K-000 Technical Data: Stroke: 200 mm Rcsdpfx Aex A Aa Ajgzek Piston dimensions (H x W x D): 1037 x 385 x 180 mm Fmax: 20 kN Vmax: 125 mm/s Accessories: ClipOn extensometer 13.5 mm Extensometer MFA 25 (temperature range up to +200°C) Computer + Software: testXpert II V3.5 Climate chamber: Airtemp LKG-K-TK-50-040/150 Temperature range: -40°C to +150°C Climate temperature range: 20°C to +90°C Humidity range: 10% to 95% Test chamber volume: 50 liters Temperature change rate: 1 K/min Refrigerant: R404, 5 kg Voltage: 400V 3Ph/N/PE/50 Hz 16 A 9 kW Condition: used Total weight: approx. 1500 kg Scope of delivery: (see picture) (Subject to change and errors in technical data and specifications!) For further questions, we are happy to assist you by phone. Written orders possible by email or fax.

Condition: used, Zwick Type: HA 50 Dimensions: H 2685 mm x W 1040 mm x D 750 mm Footprint: 1600 cm² Technical data: Fmax: 50 kN Vmax: 1500 mm/s Maximum test chamber height: 1370 mm Test chamber width: 565 mm Redpfx Agex A Aaiszsck Accessories: Kistler force sensor 50 kN via NI-Labview Hydraulic power unit 280 bar Mounting surface: 415 cm² Clamping device / specimen holder included (Universal flange, high-strength jaws for specimen holder) Computer + testXpert R V6.0.0 software Condition: used Scope of delivery: (See image) Weight approx. 1200 kg without frame, etc. (Subject to alterations and errors in technical data; all information provided without guarantee!) For further questions, please feel free to contact us by phone.

Condition: used, Zwick Type: Z30 Technical specifications: Overall height 2114 mm, width 748 mm, depth 580 mm Fmax: 30 kN Vmax: 125 mm/s Accessories: Extensometer ClipOn 13.5 mm Extensometer ClipOn 40 mm Computer + software testXpert II V3.5 Total weight approx. 500 kg Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in technical data and specifications!) We are happy to answer further questions by phone. Rcedpfxex Az Skj Agzjk

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Offered here is a Zwick/Roell ProLine Z010 universal testing machine with a maximum test force of 10 kN. The system was manufactured in Germany, is CE-certified, and was built in 2022. It is suitable for all types of material testing, for example tensile, compression, and bending tests in laboratory, industrial, and quality control environments. Technical data of the testing machine: Manufacturer: Zwick/Roell Model / Type: ProLine Z010 (10 kN) Test Force (Fnom): 10 kN Model: Z010 TN ProLine, nominal force: 10 kN Test area (W x H): 440 x 1050 mm Testing speed: 0.001 – 1000 mm/min, continuously up to nominal force High-precision guidance, very low noise generation High-resolution, maintenance-free DC motor Rodpfx Agsx Aqxmjzsck Electrical connection adjustable in 6 voltage ranges Certification: CE Reference: 741077 Software & PC: testXpert II basic software in German Intuitive operation, force/elongation control, statistical evaluation, user management Power supply: 230 V, 50/60 Hz, 3.5 A, 1Ph/N/PE Weight: approx. 200 kg Note: The ProLine series is among the most precise and reliable testing machines for professional applications. Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photos) Zwick/Roell ProLine Z010 testing machine Test head / compression device PC system with monitor, keyboard, and mouse Various test fixtures and accessories (see photos) (Specifications and technical details subject to change and errors!) If you have further questions, feel free to contact us by phone.

Condition: excellent (used), CTS CTS CW-60/11 – Water-Cooled Climate Test Chamber The CW-60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for performing temperature and humidity testing on multiple specimens simultaneously. Device Description This climate test cell enables functional or material property testing of a specimen under the influence of temperature and humidity. Efficient air circulation with a high recirculated air volume ensures optimal transfer conditions for the test specimens. The air conditioning section is located at the rear of the inner chamber. The system components are mounted in a separate frame behind the chamber for easy accessibility. Control electronics are housed in a discrete control cabinet, with the control panel integrated into the cabinet door. For dehumidification, the chamber is equipped with a self-regenerating compressed air dryer. Fresh air flushing of the test chamber can be performed via a blower. Technical Performance Data: Temperature Testing: - Temperature range: –60 °C to +90 °C - Temporal temperature deviation: ±0.5 to 1 K - Spatial temperature deviation: ±1 K at 200 mm wall clearance - Temperature ramp rate (supply air, linear): Heating: 2 K/min from –40 °C to +85 °C Cooling: 2 K/min from +85 °C to –40 °C Climatic Testing: - Temperature range: +10 °C to +95 °C - Humidity range: 10 % to 95 % RH - Dew point range: +5 °C to +89 °C - Temporal temperature deviation: ±0.5 K - Temporal humidity deviation: ±2 to ±5 % RH - Without thermal radiation Rcjdpfx Ajx Ankysgzsk - At equilibrium state Technical data assume ambient temperature of +25 °C, rated voltage 400 V, without test load, without radiation, and without additional equipment. Dimensions: Internal dimensions (test chamber / usable volume): - Volume: approx. 11,000 liters (11 m³) - Approximate internal dimensions: Width: 2,100 mm, Depth: 2,530 mm, Height: 2,200 mm (may vary slightly depending on configuration) External dimensions: Width: 2,700 mm, Depth: 5,200 mm, Height: 2,520 mm (depending on door, frame, accessories, etc.) Operating Data: - Rated power: 84.4 kW - Rated voltage: 400 V 3/N 50 Hz - Rated current: 131.4 A Technical Specifications: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, continuously variable output via electronic control and monitoring system - Eco-friendly refrigerants: R 23 / R 404 A - Weight: 6,000 kg Notes: - Inspection by appointment possible (46325 Borken) - Shipping via freight carrier available – Costs & arrangements on request - Scope of delivery: (see picture) (Technical data subject to change and errors excepted.) Further questions can be answered by phone.

Condition: excellent (used), CTS CW‑60/11 – Water-Cooled Climatic Test Chamber The CW‑60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Rcodpjx Anipsfx Agzjk Device Description: This climatic test chamber allows you to evaluate the functionality or material properties of your test items under varying temperature and humidity conditions. Efficient air circulation with a high recirculation rate ensures optimal climatic transfer to the test specimens. The air treatment chamber is located at the rear of the interior space. Equipment assemblies are installed in a separate frame behind the unit, providing easy access. The control system is housed in a separate control cabinet, with the operating panel integrated into the cabinet door. For dehumidification, the test chamber features a self-regenerating compressed air dryer. A fan can be used to flush the test chamber with fresh air. Technical Specifications: Temperature Tests: - Temperature range: –60 °C to +90 °C - Temporal temperature deviation: ±0.5 to 1 K - Spatial temperature deviation: ±1 K at 200 mm from wall - Rate of temperature change (supply air, linear): - Heating: 2 K/min from –40 °C to +85 °C - Cooling: 2 K/min from +85 °C to –40 °C Climatic Tests: - Temperature range: +10 °C to +95 °C - Humidity range: 10 % to 95 % RH - Dew point range: +5 °C to +89 °C - Temporal temperature deviation: ±0.5 K - Temporal humidity deviation: ±2 – ±5 % RH - Without heat radiation - In steady-state conditions All technical data refer to an ambient temperature of +25 °C, rated voltage of 400 V, without test specimens, no thermal radiation, and without additional equipment. Dimensions: Internal (test chamber/usable space): - Volume: approx. 11,000 liters (11 m³) - Internal dimensions (approx.): Width: 2100 mm, Depth: 2530 mm, Height: 2200 mm (may vary slightly by configuration) External dimensions: Width: 2700 mm, Depth: 5200 mm, Height: 2520 mm (depending on door, frame, accessories, etc.) Operating Data: - Rated power: 84.4 kW - Rated voltage: 400 V 3/N 50 Hz - Rated current: 131.4 A Technical Design: - Refrigeration unit: water-cooled, low noise, semi-hermetic, stepless capacity control via electronic monitoring and control system, eco-friendly refrigerants R 23 / R 404 A Weight: 6000 kg Notes: - Viewing by appointment (46325 Borken) - Shipping by freight carrier possible; costs & arrangement upon request - Delivery scope: (see photo) - (Subject to change and error in technical specifications—information provided without obligation.) - For further questions, please contact us by phone.

Condition: excellent (used), Weiss Model: WK3 600/0-M Weiss Climate Test Chamber, Water-Cooled Series: WK3-../0 with SIMPAC* Controller Test chamber volume: approx. 600 liters Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1995 mm, Width 1090 mm, Depth 1660 mm Operating data: Test chamber lighting: LED 24 V, 6.8 W / Halogen bulb 2 x 24V, 50W Rated voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated power: 2.3 kW Rated current: 10 A Site-provided fuse: 16 A slow-blow Control cabinet and operator panel protection class: IP 54 Maximum heat emission to environment: 1200 W Sound pressure level: Measured at a distance of 1m from the front, at a height of 1.6m: 46 dB(A) Data for temperature tests: Temperature range: -5°C to +90°C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Temperature gradient (according to IEC 60068-3-5) Rcodpfx Agsx Ag R Sszjk Temperature change rate: Heating 0.6 K/min Cooling 0.3 K/min Heat compensation at +20°C to +50°C: 200 W Data for climatic tests: Temperature range: +10°C to +90°C Dew point range: 4 to +89.5°C Humidity range: 10 to 98 % r.h. Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.3 K Spatial temperature deviation: ± 0.5 to ± 1 K Temporal humidity deviation: +1 to +3 % r.h. Refrigerant: R-404A Weight: 610 kg For your safety as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functionality check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Technical data and information subject to change and errors!) We are happy to answer any further questions you may have by phone.

Condition: excellent (used), Weiss Type: SWT 1000 – IPX9K Weiss Spray and Splash Water Test Chamber Description: Offered for sale is a WaterEvent SWT 1000 test chamber from Weiss Technik – ideal for standardized testing of enclosure or component water ingress protection (IP) classes. With optional features, testing according to IPX9K (high-pressure/steam jet), ISO 20653, and additional standards is possible. High-pressure/steam jet nozzles for IPX9K Jet nozzles for IPX5/6, among others, compliant with standards: ISO 20653, DIN EN 60529, SAE J 575, JIS D 0203, MIL-STD 810, EN 60068-2-18, IEC 60598-1. Possible Protection Classes & Tests Depending on configuration, the SWT system covers a wide range of tests: Standard configuration: IPX3 / IPX4 tests (spraying and splashing water from all directions). Optionally: Higher protection classes up to IPX5 / IPX6 (jetting water), and – with corresponding high-pressure configuration – up to IPX9 and IPX9K. Tests are based on standards such as DIN EN 60529 (for IP protection levels) and ISO 20653 (e.g. for vehicle or outdoor applications) – depending on intended use. Rcodsxzprcspfx Agzok Typical Applications Typical application scenarios for such a test chamber include: • Electronic devices or enclosures intended for outdoor use or humid environments, such as outdoor lighting, control housing, assemblies, panels. • Components for vehicles or machines, especially those exposed to rain, splashing water, or high-pressure cleaning (e.g., construction machinery, e-bike or vehicle parts). • Batteries or electrical components requiring water ingress protection testing – e.g., automotive industry or e-mobility applications. Technical Data: Applicable protection classes: IPX3 / IPX4 Oscillating tube radius (for IPX3/4 tests): standard 200 mm (for SWT 1000), optionally up to 400 mm. Test chamber (interior): Internal dimensions: approx. 1,000 × 1,015 × 1,000 mm (W × H × D) Operation / Control: Web panel or GUI for test programming and control. Condition: used Scope of supply: (see photo) (Data subject to change and correction. Technical specifications may be updated without notice.) Further questions welcomed by phone.

Condition: good (used), Vötsch Model: VTS 7048-1 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Performance Data: With a temperature change rate of 10 K/min Test chamber internal dimensions: height 950 mm, width 800 mm, depth 650 mm External dimensions: height 2025 mm, width 1000 mm, depth 2480 mm Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.3 to ±0.8 Spatial temperature uniformity: ±0.5 to ±2 Temperature change rate (cooling): 10 K/min Temperature change rate (heating): 10 K/min Heat compensation at -20°C: 8,000 W Heat compensation at +20°C: 8,000 W Test volume: 480 liters Left: 1x side port, ∅ 125 mm Left: 1x side port, ∅ 50 mm Right: 1x side port, ∅ 125 mm Chamber is water-cooled Test chamber illumination: Halogen bulb: 24 V, 50 W Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 17 kW Rated current: 30 A Refrigerant: R-404A / R-23 Weight: approx. 1,250 kg Important information for your safety as a buyer! Rcedpfx Agoxzgn Iszek The following steps are carried out in advance on our offered chambers: 1. Function check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see image) (Specifications are subject to change and errors excepted!) For further questions, feel free to contact us by phone.