Used measuring systems for sale (271)

Condition: excellent (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 200 mm, Keyence IM-8010 Image Measurement System – lightly used, fully functional Hsdpfx Ajyz Acdomiol For sale is a Keyence IM-8010 image measurement system in excellent condition. The device has seen very little use and shows no signs of damage or wear. Highlights: - Measurement area: 200 × 200 mm - Fully automatic image measurement system – place the component, press the button, done. - Easy to operate – no training required Condition: Technically flawless, visually very good. The device has only been used occasionally. Inspection / Delivery / Collection: An on-site inspection and demonstration can be arranged at any time by appointment. Collection preferred. Shipping possible by agreement. Price on request.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: AFMAAAABABAA+, The Coriolis Mass Flowmeter Proline Promass 83F, manufactured by Promass in 2011, is a precision instrument designed for accurate mass flow measurements in various industrial processes. This model, designated as 83F1H-3967/0 with serial number E710E302000, has a nominal size of DN100 (4 inches) and is equipped with a hygienic process connection DN100 DIN 11851, making it suitable for applications requiring sanitary standards, such as dairy processing. Hedpfx Asy Anhzemijl Constructed from high-grade stainless steels 1.4404/316L and 1.4539/904L, the device offers durability and corrosion resistance. It is rated for a nominal pressure (pnom) of 25 bar and operates in a process temperature range from -50°C to +200°C, with an ambient temperature tolerance from -20°C to +60°C. The flowmeter's housing features IP67 and NEMA/Type 4X protection ratings, ensuring resistance to dust and immersion in water. Sensor calibration includes a K factor of 1.6287 / 51 and a density accuracy of 0.0005 g/cc. The surface finish meets hygienic standards, featuring a roughness of 0.8 µm (150 grit). The unit is powered by a voltage range of 20-55 VAC or 16-62 VDC, consuming 15 VA/W at a frequency of 50-60 Hz. The housing shows some surface wear and minor dents, and the label exhibits slight wear but remains mostly legible. It is mounted on a wooden pallet and is equipped with attached braided cables with yellow markings and black cable ties. Some dust accumulation is visible on the flowmeter body, indicative of prior use. This Promass 83F flowmeter is suitable for precision mass flow measurement in the pharmaceutical, chemical, and food industries, particularly where hygienic conditions are required.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: X25S52452233, warranty duration: 9 months, type of input current: AC, input voltage: 230 V, overall weight: 52 kg, arm reach: 2,500 mm, number of axes: 7, FARO Quantum Max Arm, X.S, 2.5m, 7 axes (premium model, portable 3D measuring arm) with LLP Price excluding VAT Demonstration unit from October 2024 with manufacturer’s warranty until November 2026 Arm weight: approx. 8 kg; including all accessories, total weight is around 52 kg Serial no. arm: X25S52452233, serial no. LLP: LLP0P2443474, serial no. tripod: 42949 Scope of delivery includes: - FARO Arm Quantum X.S, 2.5m, 7 axes (demo device, 10/2024) - Calibration set - Transport case - Mounting plate - 3mm and 6mm iProbes - USB cable, power supply, 230V Swiss plug - Rechargeable battery - Laser Line Probe for scanning function, FAROBlu xP including calibration set and case - FARO folding tripod - Manufacturer’s warranty until 11/2026 Optional: FARO software available at extra cost after consultation to meet your needs Quantum Max X.S: This is the premium model, delivering industry-leading precision. It is designed for companies that require uncompromising accuracy and performance for their most critical applications, tightest tolerances, and certification processes. The Quantum Max Arm ensures exceptional accuracy and repeatability, making it ideal for solutions in critical quality control tasks, inspections, CAD comparison, reverse engineering, and as-built documentation. The arm is flexible for use both in production (shop floor) and in dedicated metrology labs. The 7-axis model offered here extends its functionality with an additional rotary axis (often at the arm’s wrist). This seventh axis provides enhanced flexibility and maneuverability, especially beneficial when a laser scanner is mounted to the arm. It enables easier movement of the scanner around obstacles and efficient, complete scanning of complex-shaped surfaces. The Quantum Max Arm is compatible with various probes and laser scanners (the FAROBlu® LP is included in this package), highlighting its versatility for diverse inspection requirements. Its intuitive software and user-friendly hardware allow for quick familiarization and efficient workflows. Custom-fit measurement accuracy: X.S: Industry-leading, highest precision for critical applications and tightest tolerances. Versatile configurations (axes): Hedpfx Amsymlybsiol 7-axis arm: Additional flexibility and maneuverability, ideal for use with mounted laser scanners and capturing complex geometries. Rugged construction: Engineered for reliable operation in harsh industrial environments with integrated protection against temperature, vibrations, and overload. Portability: Lightweight and portable, enabling measurements directly on the shop floor, in the lab, or on-site—reducing transport time and costs. Wide range of applications: Ideal for dimensional analysis, CAD comparison, quality control, as-built documentation, reverse engineering, component inspection, and certification. Compatibility with various probes and scanners: Adapts to specific measurement requirements (touch probes, laser line scanners). Easy operation: Intuitive user interface and ergonomic design for quick training and efficient workflows. Enhanced data quality: Provides detailed and accurate 3D data for well-informed decisions in manufacturing and quality assurance.

Condition: excellent (used), For sale: Professional KEYENCE IM-7500 measuring system with IM-7020 head. The device is designed for fast and highly precise measurement of components in production and quality control. The equipment enables automatic measurement of multiple dimensions simultaneously using a camera. Ideal for CNC workshops, tool rooms, and industrial applications. Technical data Manufacturer: KEYENCE Model: IM-7500 Head: IM-7020 Type: Optical measuring system Country of origin: Japan Automatic measurement by camera High measurement accuracy Condition Used Fully functional Normal signs of use Included in the set KEYENCE IM-7500 unit IM-7020 head Hsdoyvv Tropfx Amiol Monitor Control unit Keyboard and mouse Wiring

Condition: not inspected (used), functionality: unexamined, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified period from 04.05.26 to 07.05.26. TECHNICAL DETAILS Measuring range: 40 - 100 mm Number of micrometers: 6 Number of measuring rings: 3 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 510 x 370 x 100 mm Weight: 20 kg External reference: Lot 11 Hsdpfxoyr H Nne Amijl

Condition: used, Year of construction: 2016, measuring range X-axis: 300 mm, measuring range Y-axis: 250 mm, measuring range Z-axis: 150 mm, Coordinate measuring device for simple inspection of components directly on the production floor. Measurement routines can be visually displayed step by step for untrained operators. The device was purchased in 2016 but was used only briefly as it proved unsuitable for the intended application. It is in nearly new condition and comes in its original packaging. Manufacturer: Keyence Model: XM-1000 Year of Manufacture: 2016 Measuring range: 300 x 250 x 150 mm Repeatability: ±3 µm Measurement deviation: ±8 µm Hodpfxoyy R Irj Amiol Equipment: - XM-1000 measuring system - XM-1500 measurement computer - XM-P1000 measuring probe - Several probe heads / balls - Documentation - Original packaging

Condition: excellent (used), For sale: Professional CNC tool measuring and presetting device by PWB Systems AG Switzerland. The presetter is used for precise setting of tool length and diameter before mounting in the CNC machine. This reduces machine setup time and increases machining accuracy. The device is equipped with a SMART optical system with a camera, enabling accurate measurement of the tool edge. Swiss-made equipment – very robust and precise construction. ⸻ Technical specifications Hodpfx Asyuqu Tjmisl • Manufacturer: PWB Systems AG – Switzerland • Model: Tool Master ER10 • Optical system: SMART camera • Measurement: Z / tool length • Digital display with control keyboard • Tool holder • Solid construction

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 23352279, type of input current: three-phase, input voltage: 400 V, total width: 600 mm, total length: 1,600 mm, total height: 2,150 mm, overall weight: 460 kg, power: 5.5 kW (7.48 HP), compressed air connection: 6 bar, Equipment: documentation/manual, type plate available, SICK MCS 100FT/F CEMS System (2023) - Unused / Zero Hours - QAL1 Certified Available for immediate sale: A complete, unused (zero hours) Continuous Emission Monitoring System (CEMS) SICK MCS 100FT/F, manufactured in October 2023. This is a turn-key solution featuring advanced multi-component analysis technology. Key Technical Specifications: - FTIR Technology: Simultaneous measurement of SO2, NO, NO2, CO, CO2, HCl, HF, and H2O Hedpfjy A Nu Asx Amijl - FID (TOC) Analyzer: Integrated total organic carbon measurement - Zirconia Sensor: Integrated O2 measurement - Certification: Fully QAL1 certified (EN 15267 compliant) - Acid Mist Protection: Includes special cabinet with Acid Mist Absorber Box (ideal for H2SO4 protection during petcoke combustion) Complete Package Includes: - SICK MCS 100FT/F Analyzer Cabinet - Sampling Probe - 20m Heated Sampling Line - MEAC/DAU Data Acquisition System Condition: Brand New / Unused Availability: Immediate (Ex-stock) Ideal for cement and lime plants, refineries, and power generation facilities looking for a high-end upgrade without the manufacturer's lead time. FAT reports and technical manuals are available upon request.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, measuring range X-axis: 254 mm, measuring range Y-axis: 152 mm, measuring range Z-axis: 100 mm, workpiece weight (max.): 45 kg, feed length X-axis: 254 mm, feed length Y-axis: 152 mm, feed length Z-axis: 100 mm, travel distance X-axis: 254 mm, travel distance Y-axis: 152 mm, travel distance Z-axis: 100 mm, input frequency: 50 Hz, For Sale: S-T Industries Profile Projector 22-2600 – 30" Screen, 5X Magnification | Precision Optical Comparator Now available at Used Machine Tools Ireland Ltd – a high-precision S-T Industries Profile Projector, Model 22-2600, with a large 30" (760mm) viewing screen, Heidenhain Quadra-chek 100 Control and 5X magnification lens, ideal for dimensional inspection in precision manufacturing. Previously used in a medical device company, this optical comparator is in very good condition and has been maintained to the highest standards. S-T Industries Profile Projector 22-2600 | 30" Screen | 5X Magnification | Very Good Condition 🔧 Manufacturer: S-T Industries 📍 Location: Ireland Hsdpfx Amjw Nygnjisl 📅 Model: 22-2600 🧰 Condition: Very good – ex-medical device company 📦 Available: Immediately 🛠️ Technical Specifications: Brand: S-T Industries Model Number: 22-2600 Control: Heidenhain Quadra-Chek 100 Screen Size: 30" (760mm) diameter Magnification Lens: 5X Worktable Travel (X-Y): 10" x 6" (254mm x 152mm) Glass Stage Plate: 12" x 8" (305mm x 203mm) Load Capacity: Approx. 45 kg (100 lbs) Screen Rotation: 360° with digital readout Illumination: Surface (Oblique) Illumination – Halogen Profile Illumination – Collimated light with adjustable brightness Focus Travel (Z-Axis): 4" (100mm) Power Supply: 230V / 50Hz Condition: Very good – ex-medical device company Country of Origin: USA Location: Ireland 🧭 Ideal For: Medical device manufacturing Aerospace & precision engineering Tool & die inspection Quality control and dimensional inspection labs S-T Industries Profile Projector for sale Used optical comparator Ireland 30" screen profile projector Precision measuring equipment Dimensional inspection projector 22-2600 comparator S-T Industries 5X magnification projector Used metrology equipment Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, measuring range X-axis: 254 mm, measuring range Y-axis: 152 mm, measuring range Z-axis: 100 mm, workpiece weight (max.): 45 kg, feed length X-axis: 254 mm, feed length Y-axis: 152 mm, feed length Z-axis: 100 mm, travel distance X-axis: 254 mm, travel distance Y-axis: 152 mm, travel distance Z-axis: 100 mm, input frequency: 50 Hz, S-T Industries Profile Projector 22-2600 – 30" Screen, 5X Magnification | Precision Optical Comparator Now available at Used Machine Tools Ireland Ltd – a high-precision S-T Industries Profile Projector, Model 22-2600, with a large 30" (760mm) viewing screen, Heidenhain Quadra-chek 100 Control and 5X magnification lens, ideal for dimensional inspection in precision manufacturing. Previously used in a medical device company, this optical comparator is in very good condition and has been maintained to the highest standards. S-T Industries Profile Projector 22-2600 | 30" Screen | 5X Magnification | Very Good Condition 🔧 Manufacturer: S-T Industries 📍 Location: Ireland 📅 Model: 22-2600 🧰 Condition: Very good – ex-medical device company Hedpfx Aew Nyfwomiel 📦 Available: Immediately 🛠️ Technical Specifications: Brand: S-T Industries Model Number: 22-2600 Control: Heidenhain Quadra-Chek 100 Screen Size: 30" (760mm) diameter Magnification Lens: 5X Worktable Travel (X-Y): 10" x 6" (254mm x 152mm) Glass Stage Plate: 12" x 8" (305mm x 203mm) Load Capacity: Approx. 45 kg (100 lbs) Screen Rotation: 360° with digital readout Illumination: Surface (Oblique) Illumination – Halogen Profile Illumination – Collimated light with adjustable brightness Focus Travel (Z-Axis): 4" (100mm) Power Supply: 230V / 50Hz Condition: Very good – ex-medical device company Country of Origin: USA Location: Ireland 🧭 Ideal For: Medical device manufacturing Aerospace & precision engineering Tool & die inspection Quality control and dimensional inspection labs S-T Industries Profile Projector for sale Used optical comparator Ireland 30" screen profile projector Precision measuring equipment Dimensional inspection projector 22-2600 comparator S-T Industries 5X magnification projector Used metrology equipment Notes: *Specifications are given in good faith but not guaranteed*

Condition: good (used), Keyence RB-1200 3D Bin-Picking Robot Vision System with Camera Unit and Controller Manufacturer: Keyence Model: RB-1200 Type: 3D Bin-Picking Vision System for Robots System: Industrial image processing system for automatic part recognition Camera Unit: Keyence RB-1200 Vision Sensor Components: Camera unit, vision controller, mounting frame with four sensor modules Function: 3D detection and position determination of unordered parts in containers Application: Automated picking and removal of parts by industrial robots Connections: Industrial communication interfaces on the controller Scope of delivery: Camera unit, controller, sensor mounting frame, connection cables Condition: Good Location: Fulda Hodpfx Amjyrun Eoisl

Condition: used, Year of construction: 2011, valve dimensional inspection Hodpfxjyrg E Ae Amiel *

Condition: good (used), MASS FLOW TRANSMITTER-PD340 Item: D_1596-Flowmeter-PD340, Digital flow meters Mass Flow Transmitter with or without display (New or used) PD340. Ø 1" - 4". Hodpshcpwtefx Amisl For more informations please contact us!

Condition: excellent (used), Year of construction: 2018, Model IM-7010, Model Year 2018 Hedeyc N Egepfx Amijl Type: Measuring Head Model with Transmitted and Reflected Light Image Sensor: B/W CMOS, 1", 6.6 megapixels Display: LCD Monitor, 10.4" (XGA: 1024 × 768) Lens System: Dual Telecentric Lens Image-based Measurement Measuring Range: - Standard Measuring Mode: 200 mm × 200 mm (4 × R50) - Precision Measuring Mode: 125 × 125 mm Display Resolution: 0.1 µm Repeatability (without stage movement): - Standard Measuring Mode: ±1 µm - Precision Measuring Mode: ±0.5 µm Repeatability (with stage movement): - Standard Measuring Mode: ±2 µm - Precision Measuring Mode: ±1.5 µm Measurement Accuracy (±2σ): - Without stage movement: - Standard Measuring Mode: ±5 µm*1 - Precision Measuring Mode: ±2 µm*2 - With stage movement: - Standard Measuring Mode: ±(7 + 0.02l) µm*3 - Precision Measuring Mode: ±(4 + 0.02l) µm*4 External Remote Input: Voltage-free input (with and without contact) External Output: I.O./N.G./FAIL/MEASUREMENT Photo-MOS Output: Rated load 24 V DC, 0.5 A, ON-resistance max. 50 mΩ Interfaces: - LAN: RJ-45 (10BASE-T/100BASE-TX/1000BASE-T) - USB 3.1: 4 ports (rear) - USB 2.0 Type A: 2 ports (front) Recording: 500GB Hard Drive Illumination System - Transmitted Light: Telecentric transmitted light illumination (green LED) Ring Illumination: Reflected light (ring light) with four segments XY Stage: Travel range 100 × 100 mm (motor-driven), max. load capacity 5 kg Z Axis: Travel range 75 mm (motor-driven) Power Supply: 100 to 240 V AC, 50/60 Hz, max. power consumption 430 VA Environmental Resistance: - Pollution Degree: 2 - Overvoltage Category: II - Ambient Temperature: +10 to +35 °C Relative Humidity: 20 to 80% RH (non-condensing) Weight: approx. 30 kg

Condition: ready for operation (used), Etalon Polo Horizontal Length Measuring Device Measuring Bench Gauge External measuring range: 0 ÷ 100 mm Internal measuring range: 5 ÷ 100 mm Measuring span: 50 mm Output device resolution: 0.001 | 0.0001 | 0.00002 mm Error limit 0.5 µm Measuring force, adjustable: 0 ÷ 4 N Support table height adjustment: 18 mm Length: 500 mm Hodpfxjwcxgzs Amiol Width: 170 mm Height: 170 mm Weight: 41 kg Accessories: Mounting plate with H-shaped recess Mounting block for floating measuring table Control system for lever dial indicators Floating measuring table with tip holder 1 pair of measuring inserts 1 micrometer spindle for testing dial indicators and lever dial indicators Application examples: - Checking plug gauges with a control system - Checking plug gauges and test pins with a floating precision measuring table - Measuring test pins - Checking ring gauges with a mounting system - Checking thread plug gauges with a control system. - Testing dial indicators You are welcome to come by for a viewing. We would be happy to arrange a cost-effective shipping service for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical specifications and errors in the description of the item may occur and are reserved.

Condition: excellent (used), functionality: fully functional, Ball bar interferometer including software Hedpfxjyx Sqfe Amijl

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: M-G1035, input voltage: 230 V, total width: 610 mm, total length: 1,290 mm, total height: 1,750 mm, overall weight: 600 kg, VIO 20|50 linear M-G1035: Microset tool presetter for drilling, milling, and turning tools Adjustment range Ø 420 mm, measuring length 500 mm (travel in X-axis up to 50 mm beyond spindle center possible) Fully equipped with: - Microvision VIO image processing system featuring: PC technology, 24" 10-point multi-touch monitor - Mega-pixel camera with telecentric lens and blue telecentric illumination - Field of view approx. 5.2 x 5.2 mm, full-image display - Display accuracy 0.001 mm, repeatability +/- 0.002 mm - Cutting edge quality control via live image display (edge inspection) - Measurement with fixed and floating crosshair - Intuitive user interface for shortest measuring cycles - Clear, user-friendly screen displays for highly ergonomic operation and workplace safety - Tool lists, job-related for potential data handover to the machine tool - Tool memory with image allocation as well as assignment of parameter and technology data - Password protection for multiple operators (user management) - Extensive functions for data backup and maintenance - Absolute, differential, and chain dimension display, radius/diameter switching - Interfaces: Ethernet, USB and RS232 - Linear drives in X and Z axis for maximum dynamics and positioning accuracy - Collision protection during motorized movements (minimum speed 180 mm/s) - Fast autofocus - Motorized spindle, 36 rpm - Precision via motorized fine positioning - Manual operation with CNC mode for X and Z axes (optimal operating comfort for positioning) - Heidenhain glass scales in X and Z axis - Rigid grey cast iron construction with torsion-resistant machine bed - Edge finder for quick alignment to tool cutting edges - Sturdy metal base cabinet, compressed air maintenance unit, calibration master - Power supply: 100 V - 115 V and 230 V - Power consumption: max. 1400 VA - Pressure: min. 6 bar - Air consumption: max. 10 liters per hour (depending on configuration and working cycles) Weight: up to 600 kg, dimensions without arm (W/D/H): approx. 610/1290/1750 mm M-A2063: Technology package VIO linear Control electronics PC system and 27" monitor 44x magnification of tool display 27" 10-point multi-touch monitor HD display resolution 1366 x 768 (16:9) ITX PC system, keyboard and mouse Machine feet with vibration damping Photo capture of tools with external camera via Microvision HQRID scanner QR code scanner for identification of tool holders / complete tools using a unique label, enabling measurement program selection. M-S1029: ISS - U universal ultra-precision spindle "autofocus" Hodjyw Sfyspfx Amiol Motorized autofocus for precise tool focusing Runout accuracy at spindle: 0.002 mm Pneumatic, mechanical universal tool clamping ISS Up to 20 kN clamping force Mechanical adapter locking Pneumatic spindle brake 4 x 90°, 3 x 120° motorized indexing Automatic positioning to index positions Operator-independent tool clamping High adapter change accuracy Automatic adapter recognition At least one adapter is required for operation. Please select suitable ISS adapters. M-Y0200: Operating system Windows 10

Condition: new, functionality: fully functional, warranty duration: 24 months, input voltage: 240 V, measuring range X-axis: 280 mm, measuring range Z-axis: 350 mm, overall weight: 100 kg, workpiece weight (max.): 50 kg, Equipment: type plate available, High-end contour and roughness measuring system with air-bearing motion axes, up/down measuring function and X-sensing. Anytime optionally via software updatable functions: - Motorized Y-Supporting table Scope of supply: - Basic mechanics with integrated Y-adjustment table - Integrated control system - integrated gauging force regulation - software option roughness - Software option for measurement and evaluation of the following standards: DIN EN ISO 4287 (10/1998) DIN EN ISO 4288 (04/1998) Hedpfx Aswzlcajmijl DIN EN ISO 11562 (04/1998) DIN EN ISO 13565-1 (04/1998) DIN EN ISO 13565-2 (04/1998) VDA 2006 (07/2002) Stahl-Eisen-Prüfblatt (SEP 1940) - PC W11/64Bit; 24"TFT flat screen; - Compressed air unit consisting: Particulate filter 25µm/0.1µm, oil filters and water separator 2 precision pressure regulator mounted on base with stand - ConturoMatic Software; user manual - Software add-on for roughness calculation - Cable set - Protective cover, sturdy and water repellent (material), Commodity-Code 63079098 Description of the up down function: The scanning of surfaces in two directions is possible by the measuring direction switching function. This can be assessed without loss of the relationship to other scans from the same measuring process. Inside and external scans can be calculated to each other. This function is suitable without restrictions in automatic measurement programs. Additional evaluation possibilities are for example - Raceway diameters - Diameter - Thickness variation - Parallelism - Cone angle measurement - Calculation of pitch deviation - Thread testing (thread calculation software optionally) etc. Technical data contour and roughness measurement: Aerostatic linear bearings (X and Z) Measuring range Contour 280mmx350mm (X/Z) Measuring range Roughness 280mmx350mm (X/Z) Suitable range Ra Ra from 0.05µm* Suitable range Rz Rz from 0.5µm* Resolution 1nm Sensing system optically incremental 1 point measuring in X direction (static) Accuracy +/-(0.85µm+L/100)µm* [L=mm] Measuring speed contour 0.1-3mm/s self-optimizing Measuring speed roughness 0.1-0,5mm/s self-optimizing Positioning speed up to 25mm/s Probing force contour 30mN Probing force roughness 7.5mN Table load 25kg weight: 96kg * According to our specified terms- Subject to change without notice

Condition: new, functionality: fully functional, warranty duration: 24 months, input voltage: 240 V, measuring range X-axis: 120 mm, measuring range Z-axis: 30 mm, overall weight: 70 kg, workpiece weight (max.): 100 kg, feed length X-axis: 120 mm, Equipment: type plate available, -Leasing option available!!!- Hodpfjq Nzd Nex Amisl ConturoMatic CV120 Contour Measuring Device – "Simply measure contours" - Sample parts for free measurement can gladly be sent within the agreed framework, online DEMO after coordination possible. Ask us about our leasing options – we are happy to refer you to our partner. ✅ Up to 30% declining-balance depreciation on movable assets* ✅ Applies to investments from July 2025* ✅ T&S products are fully eligible for funding* Contour measurement system with traverse unit and motorized Z-column Scope of delivery: - CV120 motorized traverse unit with precision guide - External control and regulation unit - Motorized Z-column - Evaluation PC Desktop version Win11/64 Bit - 24" TFT monitor - ConturoMatic evaluation software; user manual - Cable set - CM software updates FREE!!! Technical Data CV120: Traverse unit (X/Z measuring axis) - Z measuring range: 30 mm - X measuring range: 120 mm - Measuring speed: 0.1–1.75 mm/s - Tilt adjustment: +/-15° - Automatic probe arm lift-off Z-column - Positioning range: 320 mm, motorized Accuracy: X-axis: +/- (1.2 μm + 2Lx / 25) μm* [L = mm] Z-axis: +/- (1.8 μm + 2Lz / 25) μm* [L = mm] Note: To adapt our CV120 to specific measuring tasks and for system extensions, various optional accessories are available, including different probe arms, universal clamping devices or custom sample holders. * as per T&S/CV120 specification -Technical changes reserved- Commodity code: 90318020 -2 year warranty- Photos may show special accessories not included in standard delivery. *For legal reasons, we are not permitted to provide legal or tax advice on this topic, and the above notes must not be considered as advice. Please consult your respective contacts (specialist department or tax advisor) if in doubt.

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, warranty duration: 18 months, input voltage: 240 V, measuring range X-axis: 250 mm, measuring range Z-axis: 320 mm, overall weight: 100 kg, feed length X-axis: 250 mm, feed length Z-axis: 320 mm, Equipment: type plate available, Modular extensible base basic Contour measuring system with down-direction Z-Scanning Anytime optionally via software updatable functions: - Up down measurement - Roughness measurement - Motorized Y-Supporting table - QR-Code Scanner (for tracingarms and reference files) - data export to QS-Stat (dfq file) - dominant waveness Hodpfx Amsxgqlhjiel Scope of supply: - Basic mechanics with integrated Y-adjustment table (17mm way) - Integrated control system - ConturoMatic Software; manual - PC W11/64Bit; 24"TFT flat screen; - Protective cover, sturdy and water repellent (material), Commodity-Code 63079098 Technical data: Measuring range 250mm Measuring range 320mm Resolution 1nm Sensing system optically incremental Inaccuracy +/-(0,9µm+L/100)µm* [L=mm] Measuring speed 0,1-3mm/s self-optimizing Positioning speed up to 25mm/s Gauging force regulation Table load 35kg Granite precision guides Weight 95kg

Condition: excellent (used), Precision CNC tool presetting and measuring device from renowned manufacturer KELCH – model Trabant 271-2/M. Equipped with a length and diameter measuring system featuring optics and a KELCH Pico LCD A23 monitor, as well as Heidenhain ND1202T Tool-Chek electronics. Very good condition, complete and fully operational unit. Technical specifications and features: • Manufacturer: KELCH GmbH + Co. Werkzeugmaschinenfabrik, Germany • Model: Trabant 271-2/M • Year of manufacture: 2000 • Measuring unit: KELCH Pico LCD (Version A23) • Display system: Heidenhain ND1202T Tool-Chek • Power supply: 230V / 50–60Hz / 1000 VA • Optical system with measuring camera and LCD screen • Rotary table with holders and two-axis adjustment system • X/Z axis measuring range: up to approx. 400 mm • Axis control from KELCH control panel (joystick + function keypad) • Digital readout, menu in German and English • Complete with original documentation and all connectors Condition: • Used, fully functional • Very clean example from a German toolmaking shop • All axes move smoothly, screen responds correctly • Ready for work Functional description: The KELCH Trabant 271-2/M is designed for fast and precise presetting of cutting tools prior to mounting in CNC machines. The optical system with Pico LCD display allows for measurement of tool length, diameter, and geometry in visual mode. Ideal for inspection and presetting of milling cutters, turning tools, drills, and special tools. Hedpfx Asxn Ax Aomijl

Condition: not inspected (used), functionality: unexamined, No reserve price – guaranteed sale to the highest bidder! Placing a bid entails a binding commitment to collect the item either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Hsdpfx Ameynz E Aoisl Measuring range: 60 - 100 mm 2-piece set MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 300 x 200 x 100 mm Machine weight: 5 kg External reference: Pieper - Lot 161

Condition: excellent (used), Year of construction: 2025, operating hours: 20 h, functionality: fully functional, type of input current: AC, input voltage: 230 V, measuring range X-axis: 200 mm, measuring range Y-axis: 200 mm, Equipment: documentation/manual, We are selling a barely used Keyence IM-8020, purchased in February 2025, together with the IM Editor (IM-H3EE) and a CAD import (IM-H3C) dongle. This allows you to prepare measurement programs from CAD models on an offline computer and import them to the Keyence machine. This model also includes a light probe. Hjdpfx Asyym Dpemiol The machine is in mint condition, fully functional, and has seen minimal use.

Condition: used, Year of construction: 2000, functionality: fully functional, type of input current: DC, input voltage: 12 V, measuring range X-axis: 200 mm, measuring range Z-axis: 350 mm, travel distance X-axis: 200 mm, travel distance Z-axis: 350 mm, input frequency: 50 Hz, Toolset 350 Tool Presetting Device in used, functional condition. Compact and precise measuring machine for the presetting and measurement of CNC tools. The machine features an optical measuring system with camera and digital display, enabling accurate tool measurement. Measurement is performed over the X and Z axes using digital measuring systems. The measuring range is approximately 200 mm on the X-axis and approximately 350 mm on the Z-axis. The measuring accuracy is about 0.005 mm, allowing for precise results in workshop and production environments. Hodsyw Sf Tepfx Amijl The machine is equipped with an ISO40 tool holder (interchangeable), making it ideal for use in CNC manufacturing, toolmaking, and metalworking applications. Electrical connection: 12 V DC Frequency: 50 / 60 Hz Features: • Optical camera system • Digital display with control panel • Reference holder for tool adapters • Interfaces for data transfer Areas of application: • Tool presetting for CNC machines • Tool measurement • Mechanical engineering • Metalworking Inspection by appointment possible. Sale as inspected.

Condition: not inspected (used), functionality: unexamined, No reserve price – guaranteed sale to the highest bidder! By placing a bid, you commit to timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! Hsdpfx Aoynkvqomiel TECHNICAL DETAILS 13-piece set (various sizes) Measuring range: up to approx. 100 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 500 x 400 x 120 mm Machine weight: 20 kg External reference: Pieper – Lot 163