Used Milling machines - univ.conv. 400-499mm X-axis travel for sale (60)

Condition: like new (used), Functionality: fully functional, Universal milling machine Deckel FP3 with new 3-axis FPS active digital display Heidenhain General overhaul by FPS 2015 Mint condition Technical data: >> Year of construction 1980 Machine no. 2201-5045 >> Rigid angle table >> Speed: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> rapid traverse in 3 axes >> Drive power .:2,0 / 4,0 KW >> Spindle brake >> Travel X/Y/Z: 500/300/400 mm >> Vertical milling head can be moved 200 mm on headstock >> Vertical quill and horizontal quill - SK40 extendable >> Tightening system M16 >> Weight approx. 1500 kg Accessories and equipment: >> 3 axes active digital display Heidenhain (latest version) Djbvdhyou Dm E Hj Nskl >> Coolant device >> Central lubrication To the machine : On offer is a Deckel FP3 universal milling machine in mint condition. The FP3 was overhauled by FPS in 2015 and has only been used a little since then. The machine has little crank play and all spindles can be moved easily. On this newer FP3 model, the feed is infinitely variable in three axes, and the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. An oil change has been carried out. Mechanically and electrically tested. The digital display from Heidenhain makes work easier and even more precise. Take the opportunity to inspect and try out this machine on site under power. The machine is available immediately.

Condition: used, Year of construction: 1995, - Heidenhain position display - Infinitely variable feed in all axes - rapid traverse in all axes - Hydraulic tightening system - Rigid angular table - electric central lubrication - coolant system - workplace lighting - machine feet - year of construction 1995 Dobvdovhfqrohy Nskl Specifications Milling table: - Clamping surface: 650 x 350 mm - Clamping grooves: 5 - Slot width: 14 H7 - Groove spacing: 63 mm - Max. load: 250 kg Working range: - X-axis: 400 mm - Y-axis: 320 mm - Z-axis: 400 mm Max. Max. distances: - Top edge of table to horizontal spindle center: 140 - 540 mm - Max. table top edge to vertical head bottom edge: 430 mm Milling spindle: - Tool holder: SK40 - Vertical/horizontal speeds: 40 - 2550 rpm - Gear stages: 2 - Vertical quill stroke: 60 mm - Vertical head can be swiveled on both sides: 90 ° Feed rates: - Feed lengthwise & crosswise: 0 - 1000 mm/min - Rapid traverse lengthwise & crosswise: 4000 mm/min - Vertical feed: 0 - 1000 mm/min - Rapid traverse vertical: 3000 mm/min General data: - Drive power: 3 kW / 1410 rpm - Dimensions WxHxD: approx. 1600 x 1850 x 1350 mm - Weight: approx. 1300 kg

Condition: excellent (used), MIKRON WF 3 DP universal milling machine TECHNICAL DATA Angular table clamping surface: 450 x 800 mm number of T-slots: 9 T-slot distance: 45 mm Weight: 144 kg Machine dimensions: 1475 x 1770 x 2000 mm Weight: 1800 kg Connected load: 8,7 kW Milling spindle drive spindle speed: 21 steps speed range: 25 - 2500 /min step jump: 1,258 power of spindle motor: 3,3 / 4,0 kW tool holder: ISO 40 / M16 quill movement, vertical: 110 mm Dobvjlnfggedhy Nokl Feed drive Feed rates in all 3 axes: Infinitely variable Feed range: 1 - 2000 mm/min Rapid traverse in all feed directions: 3000 mm/min Torque at motor longitudinal + transversal: 4 Nm Vertical: 8 Nm Displacement travel Longitudinal movement of the clamping table (X axis): Automatic: 400 mm Transverse movement of the clamping table (Y axis): Automatic: 400 mm Vertical movement of the clamping table (Z axis): Automatic: 385 mm For the correctness, completeness and topicality of the data we do not take over guarantee

Condition: new, Year of construction: 2025, Functionality: fully functional, travel distance X-axis: 420 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 380 mm, spindle speed (max.): 2,600 rpm, spindle speed (min.): 65 rpm, quill stroke: 100 mm, total height: 1,800 mm, total width: 1,500 mm, total length: 1,200 mm, table width: 390 mm, table length: 840 mm, workpiece weight (max.): 200 kg, distance table to spindle center: 470 mm, Equipment: documentation/manual, Table surface (angle table): 390 x 840 mm Max. workpiece weight: 200 kg Travel X: 420 mm Travel Y: 220 mm Travel Z: 380 mm Quill travel Z1: 100mm Speed range: 65 - 2600 rpm Gear levels: 12 Drive power: 2.2 kW Tool cone: SK 40 (DIN 2080) Weight approx.: 1200 kg Dkobsu Nytzovdhy Nol Including extensive standard accessories, including: Work area paneling with doors at the front 3-axis digital display Pneumatic tool clamp for vertical spindle with SK-40 (DIN 2080) Double-monitored spindle protection 3 conventional handwheels Complete electric. Equipment for three-phase current 400 V, 50 Hz Ball screws for X, Y and Z axes Vertical milling head Fixed angle table 9840 x 390 mm clamping surface Swivel device for vertical milling head LED machine light Protective bellows for the vertical and horizontal guideways Automatic central lubrication for the axes and ball screws Coolant system with pump Set (4 pcs.) of bearing elements

Condition: defective spare-parts repository (used), Year of construction: 1994, machine/vehicle number: 2803-2194, Universal milling machine cover FP3 with 3 - with cover analog 4 control (defective) Technical data: - Year of construction: 1994 - Table diameter: 500mm - Speed: 40 - 2000 rpm - Drive power: 3 KW - Travel X/Y/Z - Weight approx. 1500 kg Accessories and equipment: Dobvdhju U I Iuoy Nskl - Display cover Analag4 Grundig dialog control 4 (defective, error not known) About the machine : We are offering a Deckel FP3 NC universal milling machine in good external condition. The spindles can be moved easily. The round_groove clamping table is in good condition. Mechanically ready for operation, but the control is defective. Exact fault unfortunately not known. Sold on behalf of a customer, without any warranty as a spare parts donor.

Condition: used, Year of construction: 1972, Milling machine used Dsbvdhysudb N Do Nskl Make:Kunzmann Model: UF6N year of construction: 1972 Technical data: Table longitudinal travel automatic: 440 mm Table longitudinal travel by hand: 450 mm Transverse table travel 200 mm Table vertical travel horizontal/ vertical 465/500 mm Table size 860x240 mm Table swivels 45° on both sides Distance table/spindle 430 mm Spindle holder ISA 30 Quill stroke 60 mm Tiltability of the spindle head +/- 90 18 spindle speeds horizontal 32-1342 rpm 18 spindle speeds vertical 72-2888 rpm 6 automatic feeds lengthwise 13.12-164 mm/min 6 automatic cross feeds 26.24-328 mm/min. Spindle drive 1.8/2.6 kW with inclinable vertical milling head/clamping vice/ Counter holder/collet chuck with collets Weight approx. 850 kg Dimensions approx. 1400x1900x1800 mm

Condition: like new (used), Year of construction: 2020, Functionality: fully functional, Universal milling machine DMG FP4M Special Edition With 3-axis digital readout ND7013 from Heidenhain Mint condition Made in Germany CE conform !!! Technical data: >> Year of construction 2020 >> Rigid angular table clamping surface 480x800mm >> Spindle drive speed range 25-3000 min-1 stepless with input at counter >> Regulated main drive 6 KW >> Vertical milling head swivels +- 90 degrees (180 degrees) >> Linear axes feed range 6-500 mm/min >> Rapid traverse 1500 mm/min >> Space requirement (W+D) approx. 2.2 x 1.9 meters >> Weight approx. 1600 KG Accessories and equipment: >> Heidenhain digital readout ND 7013 Dkebvdhyjuxn Npo Nol >> Coolant device >> Minimum quantity lubrication >> Central lubrication >> Machine feet >> Operating instructions, etc. To the machine : We offer a universal milling machine DMG FP4M Special Edition with 3-axis digital readout from Heidenhain ND 7013 in mint condition. A reliable and user-friendly machine made in Germany. An oil change has been carried out. Mechanically and electrically tested. Take the opportunity to inspect and try out the Deckel machine on site under power.

Condition: like new (used), Machine like new from laboratory x-path 400 mm y-path 320 mm Dksbvdeu Nnaiehy Njl z-path 400 mm Control Heidenhain TNC124 table size 650 x 350 mm Tool holder SK 40 Spindle speeds 0-4,000 rpm Quill stroke 60 mm Vertical head swivels 90 degrees Total power requirement 5.0 kW Machine weight approx. 1.3 t Space requirement approx. 2.00 x 2.00 x 2.00 m

Condition: reconditioned (used), Functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 380 mm, feed length Z-axis: 350 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 2 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 63 rpm, quill stroke: 50 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 2 m/min, rapid traverse Z-axis: 4 m/min, table width: 800 mm, table length: 360 mm, table load: 200 kg, overall weight: 1,600 kg, workpiece weight (max.): 200 kg, power: 5 kW (6.80 HP), year of last overhaul: 2024, Ladies and Gentlemen, We are selling a Maho MH500M universal milling machine, which stands out due to its extremely simple and convenient operation. For example, all feeds can be infinitely adjusted by potentiometer. The machine has been extensively overhauled in our workshop so that it is technically and visually in excellent condition. All guides are in good order, the gears run quietly and the levers are easy to operate. Availability: on request Working range X: 500 mm Working range Y: 380 mm Working range Z: 350 mm Speed range of the main spindle: 63 - 4,000 min/-1 Gear stages: 2 Tool holder: SK 40 Tool clamping: Hydraulic Quill stroke: 50 mm Table variant: rigid Table clamping surface: 800 x 360 mm T-slots: 14H7 - 5 / 63 Max. table load: 200 kg Feed speed: 1 - 2,000 mm/min Rapid traverse ( X / Y / Z ): 4 / 2 / 4 m/min Total power requirement: 5 kW Dkjbvdernnf Nshy Nsl Machine weight: approx. 1.6 t Space requirement: approx. 3.0 x 3.0 x 2.5 m Additional equipment and accessories: coolant device, work lamp, electrical supports, foot pedal for tool clamping (optional) Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice - On request, you can order additional accessories such as tools etc. directly with the machine - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: like new (used), Year of construction: 2010, Machine comes from the Daimler Benz technical center X 650 mm Y 500 mm Z 450 mm Table size 1,100 x 600 mm Table load 450 kg Speed range 6,500 rpm Spindle holder SK 40 Tool changer 24-fold Siemens 840 D control unit Total power 20 kW Machine weight 5500 kg Bm9zrnafs87 Space requirement (W x D x H) 2.3 x 3.1 x 2.3 m Dsbvdhyotdfbmj Nokl Condition very good