Condition: used, Functionality: fully functional, Wema Probst QF50 Cross-Mill Machine Cross-Mill machine for processing round timber with a swivel table for adjusting the milling angle. Fpjbewc Tdnou Tbq Esg 2 machining stations 1 cross-milling unit 1 drilling unit

Condition: used, Year of construction: 1981, Distance between centers: 1300 mm Copy length: 1250 mm Machine center height: 250 mm Center height above support: 160 mm Slide feed speed: 3 m/min Weight: 630 kg Speeds: 500-1000-1500-3000-2100-4200 rpm Hydraulic Storage location: Nattheim Fpebuevvkt Io Tbq Ejg

Condition: used, Year of construction: 1991, Table dimensions 1200 x 730 mm Motor output 4 kW Spindle length 180 mm table height 920 mm spindle stroke 260 mm Weight 580 kg Spindle speed 3000/4500/6000/7000/10000 rpm Max. table protrusion: 230 mm Fsbu Tbqowbi H Ao Espg Max. dimensions of the tools that can be lowered under the table: 320 x 90 mm

Year of construction: 2021, Condition: like new (used), Protective cover for milling curved parts on the ring etc. This protective device is often recommended by the BG. Maximum cutter diameter 160mm With thrust ring, brushes and brake wedge for the thrust bearing Has obviously not been used very often. The machine can be demonstrated on site by appointment. We only offer Fjbuet Ixhgo Tbq Espg only machines that are ready for demonstration in our warehouse, see "other offers from this supplier". offerer".

Condition: used, Year of construction: 1980, Used machine Fsbu Tbsrh Ntveq Espg Condition: various small defects without chains Equipment and technical data: Stroke left/right: 150 mm, Top/bottom stroke: 150 mm Motor: 1.5 kW Can be used as a spare parts carrier Availability: short term Location: Flörsheim

Condition: good (used), Kettenstemmer, chain mortiser Eccentric clamp Chain 50 x 175 mm Port 380 Volt Fpsbusdtri Uj Tbq Eeg Location: Off the shelf 54634 Bitburg

Condition: used, Year of construction: 1973, Storage location: Nattheim Fsbuevvkt Us Tbq Eepg

Condition: excellent (used), Protective cover for milling curved parts on the ring etc. This protective device is often recommended by the BG. Maximum cutter diameter 160mm With thrust ring, brushes and brake wedge for the thrust bearing Has obviously not been used very often. Year of manufacture unknown The machine can be demonstrated on site by appointment. We only offer Fobu Tbet Ixikoq Espg only offer machines that are ready for demonstration in our warehouse, see "other offers from this offerer".

Condition: used, Year of construction: 1974, Used machine Year of manufacture: 1974 Fsbu Tskwhppebq Ejpg Equipment and technical data: Spindle diameter: 30 mm 6 spindle speeds: 3,000/4,000/5,000/6,000/8,000/10,000 rpm Machine has no motor brake and can therefore only be sold as a spare part carrier! Availability: short term Location: Flörsheim

Condition: new, Year of construction: 2025, Sturdy cast iron steel construction Large dimensioned milling unit made of cast iron, swivels up to -45° backwards Indication of the milling speeds by LEDs Fast, trouble-free speed change via eccentric voltage Right-left rotation Display of height and inclination 1/10 mm accurate Milling fence in heavy professional design: with fine adjustment via toothed rack, with numerical display, aluminum stop jaws, 3-fold positionable for fast repetition of the adjustment TECHNICAL DATA Suction connection suction port diameter 2 x 120mm working table Fpsbu Tjiidnfjbq Esg working table length 2500mm Working table width 655mm Electrical data Supply voltage 400V Mains frequency 50Hz Power drive motor 5,0kW Milling spindle spindle inclination 0 - -45 useful length of the spindle 125mm Spindeldrehzahl(en) 3500/6000/8000/10000min¯¹ spindle mandrel diameter 30mm Milling tool diameter max. tool diameter max. 240mm tool diameter max. lowerable 230mm tool diameter max. profile milling 210 - 240mm tool diameter max. tenon milling 320mm SUPPLY Aluminum milling stop jaws Arch milling protection hood Motorized height adjustable and swiveling milling spindle Digital display of the set values Speed display on the machine front via LED Table extension left and right Location: Ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1994, Design: swiveling Swivel angle forwards: + 45° Swivel angle backwards: -10 degrees Table length: 2500 mm Table width: 870 mm Extendable frame support: Yes Number of speeds: 5 Speeds: 3000/4500/6000/7000/10000 rpm Speed selection: Belt shifting + pole switching Speed display: LED Cone of the milling spindle: with 25 pneumatic interchangeable spindles Clamping length of milling spindle: 120 mm Diameter of milling arbor: 30 mm Material of stand: steel Control panel position: above Height adjustment of spindle: electric Swivel adjustment of spindle: electric Spindle locking: manual Spindle brakes: yes Extraction diameter of milling stop: 120 mm Extraction diameter of machine: 120 mm Spindle direction: left/right Motor power: 5.5 kW Electric axes: Spindle height & swivel Table opening closing: Insert segment Stop jaw design: Aigner stop system Stop adjustment: Motorized Milling jaw adjustment: Manual Feed mechanism: Yes Feed adjustment: Fixed speeds Feed: 4 rollers Weight approx.: 1000 kg Dimensions: 2500 x 1500 x 1400 mm Storage location: Nattheim Fpjbu Tbqevvkufe Esg

Condition: excellent (used), Year of construction: 2007, Robust swivel milling machine swivels from -45 to +45 degrees Tiltable milling machine with very good equipment A treat for every Hofmann fan Complete 3-axis positioning control for spindle height, spindle tilt and stop. Programs can be saved All three axes can be positioned. Adjustment of the single jaw with SIKU counter Swivel control panel at eye level for control Manual movement of each axis and positioning to the set target value Pole-changing drive motor 4.7 / 6.3 kW with automatic motor brake R/L run Swivel angle electrically adjustable from - 45 to + 45 degrees Height adjustment max. 125mm, electrically adjustable Six speeds 3000, 4000, 5000, 6000, 8000 and 10,000 rpm Spindle diameter 30mm Fence is adjusted electrically Electric spindle lock for tool change Table with table slide instead of table rings Planed machine table 2750mm long Extendable workpiece support at the front Cast fence jaws Aigner Centrex workpiece pressure device 4-roller feed Holzkraft, with 8 speeds, R/L run, new rollers Feed socket, switchable from the control unit Extraction socket 2 x 120mm Compressed air connection 6bar 2 emergency stop switches Original paint, partially repaired Operating instructions Fjbu Tevbrygebq Espg CE mark Dimensions approx. 2800 x 1350 x 1900mm (LxWxH). Weight approx. 1300kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Condition: used, Year of construction: 2003, Used machine Fpebu Tbeuzn I Deq Eog Year of construction 2003 automatic height and swivel adjustment of the spindle with decimal pulses Mechanical display of spindle height and electrical display of swivel adjustment Hinged cover with aluminum guides adjustable opening of the table top via table slide System for quick tool changes with long tables with extendable workpiece support Table size 2500 x 780 mm Spindle adjustment - 45° to + 45 ° Spindle diameter 30 mm Spindle stroke 230 mm max. table opening 300 mm motor 5.5 kW with automatic star-delta start with right-left rotation speeds 3000/4500/6000/8000/10000 rpm Electronic programming of spindle height, spindle swivel and stop position (milling stop) Extraction top+bottom 120 mm Dimensions 2570 x 1450 x mm Weight approx. 670 kg Availability: short term Storage location: Flörsheim

Condition: new, Year of construction: 2025, Table milling machine minimax twf 55 es M 3 UP Professional workman's machine with motorized height and inclination adjustment of the milling spindle, four speeds and electronic control system Item number 5502266 Brand Holzkraft / SCM EQUIPMENT Equipment Aluminum sliding carriage ✔ Handle at sliding carriage ✔ FLEX ONE routing fence: heavy-duty professional design, automatic adjustment of the entire routing fence depending on the tool diameter, manual adjustment of chip removal, swing-away device, aluminum fence jaws with connecting strips Height adjustment of the spindle motorized. Telescopic miter fence with two folding stops Inclination adjustment of the spindle motorized Cantilever table ✔ Ready 3 control: Programmed movement of the milling unit in two axes, Automatic adjustment of the entire milling stop depending on the tool diameter, Stepless adjustment via switch or automatic positioning system Curved milling protective hood ✔ Position of control elements Control panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg width/depth (product) approx. 2000mm Connection suction suction connection diameter 2 x 120mm Fjbu Tbjhp Rc Ieq Ejpg Work table Working table length 1200mm Sliding carriage length 1200mm Working table width 530mm Sliding carriage width 360mm Table height 900mm Slide height 142mm Installation information Space requirement length 2800mm Machine body width/depth 846mm Space requirement width [...]

Condition: used, *Available from approx. end of 2025* Fully automatic finger jointing line for the following dimensions: Thickness: approx. 24 – 100 mm Width: approx. 80 – 240 mm Finger jointing length: 400 – 1,500 mm Finished length: 2.50 m – 13.50 m continuously variable Consisting of the following system components: - SMB vacuum destacking lengthwise with 2 lifting tables and 2 package roller conveyors, built in 2013 Package dimensions max. 1.20 x 1.20 x 6.00 m 4 suction pads Sicko system Separation and infeed into roller conveyor for scanner feeding, board turner, switch for too moist, too dry, switch for B-quality, marking station or automatic operation - Bidac end-face scanner for cupping detection, built in 2013 - Brookhuis moisture measurement FMI 5 Year of manufacture 2019 - Microtec scanner Goldeneye 502, year of manufacture 2012 with X-ray, 4 color cameras and new optimization software - Dimter-Opticut 350-2, year of manufacture 2003 with paddle ejector, year of manufacture 2009 and associated sorting belts and pneumatic ejector for 2 additional qualities - NKT packaging - NKT finger jointing system with turntable Spezialpack AH 1050, year of manufacture 2005 consisting of: Milling machine · Tipping station · Threading section length 5.0 m · Cyclic press length 6.00 m · Cross-cut saw - SMB stacking machine, year of manufacture 1998, 2.50 - 13.50 m length, divisible into 2 units (e.g. 2 x 5.0 m) 8 stacking arms, 8 stacking tongues, manually adjustable electro/hydraulic stop, package width: max. 1200 mm, package height: max. 600 mm, hydraulic package pusher Storage location: Customer Fobu Tovvi Tyobq Eepg

Condition: used, Used machine Condition: completely workshop checked Equipment and technical data: Motor: 5.5 kW Spindle diameter: 30 mm 2900-4400-6000-7800-10000 rpm Height and swivel adjustment: electromotive Fine adjustment: by handwheel Availability: by arrangement Fobu Tbjl A A Dmoq Eepg Location: Flörsheim

Condition: new, Year of construction: 2025, Woodworking machinesTable routers Minimax twf55 es Item number: 5502261 Sturdy cast steel construction Anodized aluminum sliding carriage Large dimensioned milling unit made of grey cast iron, swivels up to -45° to the rear Four milling speeds from 3500 to 10000 min¯¹ Right-left rotation as standard Height and inclination display accurate to 1/10 mm Fast and easy speed change via eccentric clamping Solid and precise cast iron table, stress relieved and re-annealed for lasting precision Powerful 5.0 kW industrial motor Curved milling hood included in delivery Made in Italy Dimensions and weights Length (product) approx. 1200mm width/depth (product) approx. 2000mm Weight (net) approx. 510kg Connection suction suction connection diameter 2 x 120mm Work table working table length 1200mm working table width 530mm table height 900mm sliding carriage length 1200mm Slide width 360mm Slide height 142mm Installation information Required space length 2800mm Space requirement width/depth 2910mm Explanation of space requirements The dimensions take into account maximum travels or useful lengths. Machine body length 1200mm Machine body width/depth 846mm Working area length 1600mm Working area width/depth 2300mm Explanation of working area Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Electrical data Supply voltage 400V Mains frequency 50Hz Power drive motor 5,0kW Milling spindle spindle inclination 0 to -45 useful length of the spindle 125mm Spindeldrehzahl(en) 3500/6000/8000/10000min¯¹ Milling spindle speed indicator LED on the front of the machine spindle arbor diameter 30mm Milling tool diameter max. Tool diameter max. 240mm tool diameter max. lowerable 230mm tool diameter max. profile milling 240mm Tool diameter max. tenon milling 320mm EQUIPMENT Fpebusi Dphto Tbq Eog Equipment Aluminum sliding carriage ✔ Milling fence Heavy-duty professional version with hold-down device, protective cover and aluminum milling fence jaws Telescopic miter fence with two folding stops Cantilever table ✔ Curved milling protective hood ✔ Eccentric clamp ✔ Handle on sliding carriage ✔ Height adjustment of the spindle manually Tilt adjustment of the spindle manual Control manual height and tilt adjustment of the milling unit Position of the control elements on the machine body location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2013, Table milling machine with fixed spindle TF135 EP CLASS MAIN FEATURES "FLEX" MILLING STOP: INSTANTLY IN THE RIGHT POSITION "FAST" TABLE: THE BEST SUPPORT FOR THE WORKPIECE Technical data TF 135 EP CLASS Work table dimensions [mm] 1200x730 Milling spindle clamping length (C.E.) Diam. 30-35 (40-50) [mm] 140 (140) Spindle base projection from the table [mm] 52 Spindle base projection from the table with interchangeable spindle [mm] 92 Max. tool diameter under the table with table rings (with "Fast" table insert) [mm] (300x85) Milling stop with electronic programming (positioning relative to the spindle axis) [mm] 250 (from -125 to +125) External diameter of the extraction nozzle on the cutting guard [mm] 1x120 External diameter of the extraction nozzle on the base [mm] 1x120 Extraction speed [m/sec] 20 Extraction volume [m3/h] 1700 Controls/Functions - "Easy" electronic control - Electronic control of 4 to 7 axes selectable via numeric keypad and display on 7" color LCD screen in 16:9 format. - 300 Program locations - Spindle height adjustment via "Easy" control - "Flex" milling stop with automatic adjustment via "Easy" control - Additional module for "EASY" electronic control for programming the entire stop in relation to the tool diameter and the inlet stop for the desired chip removal. - Aluminum stop jaws with connecting bars - Swiveling device for the "FLEX" stop away from the work table - Max. tool diameter 250 mm - Aluminum stop jaws instead of wooden stop jaws with connecting bars for continuous support - "FAST" table insert instead of table rings for the largest possible support surface, manually adjustable - Spindle speeds 3000/4500/6000/7000/10000 rpm - Electrical speed display (version CE and with electrical protection devices) - Electrical preparation for feed device (C.E. version) - Reversible rotation direction with electrical blocking when switching Safety/Protection - Milling guard for working on the thrust ring (max. tool diameter 160mm) - C.E. emergency stop button - Micro-circuit breaker on the spindle lock (CE version) - Safety sensors for tool changes - Electro-pneumatic spindle lock - Micro-circuit breaker on the motor compartment cover - Lockable main switch - Thermal protection switch - 110V auxiliary circuit - Automatic motor brake (CE version) - Mechanical motor brake on the main motor (version with electrical protection devices) - CE declaration of conformity (CE version) Devices - Motor power 5.5kW 7.5HP 50Hz (6.6kW 9HP 60Hz) - Automatic star/delta start TF135 EP CLASS - Spindle moulder in C.E. Version 1 pc. Volt 400 EU 1 pc. Frequency 50 Hz 1 pc. Manual device for the feed support 1 pc. Height adjustment according to the workpiece thickness with mechanical digital display, and horizontal adjustment according to the tool diameter. Thanks to the control panel column, this device allows the feed to be pivoted away from the work table. Version "TL" PRO-10 for tenoning/slotting and profiling 1 pc. Complete with: - Tenoning slide on THK recirculating ball bearing guide. Can be quickly pivoted away from the work table - Pivoting telescopic stop (+45°/-45°) with respect to the feed direction - Adjustable telescopic stop with 4 positionable stops for programming the workpiece length - Side table extensions (total length 2500 mm) complete with extendable support rail for wide workpieces - Eccentric clamping device - Splinter wood on the longitudinal stop with stop point - Tenon Fsbu Tsvvkurjbq Ejpg

Condition: new, Year of construction: 2024, New machine Year of construction 2024 Technical data Table size 1100 x 760mm Table height 905mm Milling spindle 30mm with quick-release nut Clamping height 140mm Height adjustment 125mm Suction nozzle 2 x Ø 120mm Infinitely variable speed control 150010000 rpm Motor power 7.5 kW (10 HP) Net weight approx. 880kg Technical description 7" touch control, can be used optionally, top and bottom 7" capacitive touchscreen, can also be operated with gloves can also be operated with gloves (e.g. with Maxi Flex) Language switching German, English, French (other languages on request) Milling cutter zero point selectable in the program, 3 reference points Simple menu structure thanks to innovative touch control (max. 2 levels) Display (work screen) for tool and program number program number, height, angle, speed and milling fence Operating hours counter Warning messages in the event of incorrect operation Remote maintenance via Internet (VPN tunnel) USB interface for data backup and importing Tool, program and user Tool database for 5 tools (20 programs possible per tool) 20 programs are possible per tool) Heavy-duty bench router with double-sided swivel-mounted, fixed built-in milling spindle for swivel range of +/- 45.5° 2-axis positioning control for height and tilt adjustment swivel adjustment Electronic position and speed displays Infinitely variable speed control 1500 10000 rpm 7.5 kW motor with 11 KW frequency converter Push button with electronic soft start Left and right rotation Milling cutter quick clamping device Finely planed gray cast iron table with rigid frame support Milling fence 301 Overall adjustment via 1 handwheel on the right-hand side, Adjustment range approx. 140 mm, dimension display, Total stop via touchscreen +/-0.1 mm, Partial stop adjustment, (chip removal) +5mm to -25mm is carried out via a star knob screw on the left side side, dimension display via one mm vernier, clamping on the machine table the machine table manually via clamping clamping screws, milling fence made of die-cast aluminum with 2 milled cast iron stop slats 500mm long with aluminum splitter tongues, maximum possible tool diameter is tool diameter is 250 mm Machine socket Lockable main switch Electronic, wear-free motor brake Milling protection and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Fpobu Teudqkdobq Ejg Milling spindle 30mm with quick-release nut CE-compliant incl. - Milling fence type 301 - Cast stop plates and aluminum splitter tongues - Milling protection and pressure device GAMMA V 1629 Table pusher for table top 1100 x 760 mm Coated surfaces, for quick, convenient and tool-free tool-free adjustment to different tool diameters tool diameters up to max. 240 mm, the table insert Table insert with quick lock up to tool diameter 155 mm instead of standard table insert rings (not in conjunction connection with rotary table) - Zeromaster reference measurement setting device for exact 0-point height adjustment from the milling tool to the table top for 24 V DC - HSK-80 quick-change arbor system with spindle lock and spindle lock and milling arbor 30mm instead of milling spindle 30mm (higher concentricity and no sticking in the spindle as with the spindle as with the MK 5 system or steep taper) - Console to the

Condition: as good as new (ex-display), Year of construction: 2025, CASADEI F 25 LL FK - table milling machine with tilting milling spindle and table extensions Table milling machine with tiltable milling spindle from -45° to +45 Sturdy cast steel construction Dynamically balanced milling unit anchored to the work table Particularly robust construction Smooth running due to precision aggregates and high dead weight Standard with right-left rotation and electronic blocking when changing direction 5 speeds from 3000 - 10000 min-1 Speed change is easy and convenient from the machine side Standard with MK 4 change spindle system Large work table made of cast iron for long-lasting precision Easy handling due to control elements and speed display on the front of the machine Milling fence with fine adjustment and aluminum fence jaws as standard equipment Powerful industrial motors Equipment details: Fraes fence Fraes fence with crank/handwheel adjustment from the front side With numerical display Interchangeable spindle Interchangeable spindle MK 4 standard on all CASADEI F 23 and F 25 models Option sliding carriage Option sliding carriage for small tenoning operations and for slotting Scope of delivery: Manual tiltable milling spindle from +45° to -45°. Speed indication via LED at the front Aluminum stop jaws Sheet milling protection cover Right-left rotation of the milling spindle MK 4 interchangeable milling spindle Milling fence with crank/handwheel adjustment from the front with numerical display Fpobu Tedqzcxsbq Esg table extension left and right (2500 mm length) extendable workpiece support (2500 mm length) Model CASADEI F 25 LL FK article no. 5220728 Technical data Dimensions work table 2500 x 810 mm Milling spindle tilting range +45 to -45 degrees useful length of spindle at Ø 30-35 mm 140 mm useful length of spindle at Ø 40-50 mm 180 mm milling spindle stroke 90 mm max. tool Ø profiling 250 mm max. tenon tool Ø 350 mm max. milling tool Ø 160 mm max. tool-Ø lowerable 320 x 60 mm speeds, 5-stage 3000/4500/6000/ 8000/10000 min¯¹ motor power 400 V / 50 Hz / S6-40% 7 kW weight 480 kg suction nozzle-Ø stop 1 x 120 mm suction nozzle-Ø under table 2 x 80 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: used, Pivoting unit, chain width 10 mm Fpjbuovvku Es Tbq Eeg Storage location: Supplier

Condition: used, Year of construction: 1987, Used machine Year of construction: 1987 Machine workshop checked Table size 1100 x 760 mm motor 4,7/5,7 kW pole-changing with clockwise/anticlockwise rotation Fjbu Tbqjt Hagze Ejpg Milling arbor MK 5/ 30 mm Height and swivel adjustment via handwheel Speeds 3000/4500/6000/9000 rpm Swivel range of the milling arbor - 5 to + 45 ° Milling stop with metal jaws Mounted on round insert plate and can therefore be rotated through 360 with table extension on both sides with extendable frame support with 4-roller feed unit Weight approx. 900 kg Pictures show machine in not yet overhauled condition Availability: approx. 4 weeks after order placement Storage location: Flörsheim

Condition: used, Year of construction: 1962, Used machine Used table milling machine of the company Bäuerle type SFM Year of construction: 1962 MNo.: 623596 Fpjbu Tbqomkpzlo Ejg Engine power: 3/4 HP 3 roll feed unit without milling tools due to the missing motor brake, the machine can only be sold as a spare parts carrier Availability: short term Location: Hochheim Hochheim

Condition: new, Year of construction: 2022, New machine Year of construction 2022 Fpobujkwhkyj Tbq Eog Save working time thanks to retrievable tools; once set up, the drive unit can be to the preset position again and again with a single movement Mobile and flexible use; chamfering, grooving, flush milling Supplement to the table and CNC router Table size 520 x 430 mm with fine adjustment # 10450 Availability: short term Storage location: Hochheim

Condition: used, Year of construction: 1987, Used machine Year of construction 1987 Condition: workshop checked Fpsbu Tbqotyq Hgs Eog stand projection 750 mm Spindle stroke 100 mm max. clearance between table and spindle 310 mm Spindle speed 10000/20000 rpm Motor power 2.2/3.3 kW Collet tool attachment with blowing device via compressed air connection External dimensions 905 x 1380 x 1600 mm Weight 533 kg Availability: by arrangement Location: Hochheim Hochheim