Used mounting technology for sale (159)

Condition: good (used), Year of construction: 2007, ASSCON Systemtechnik VP1000-56 * PCB size: 500 × 600 mm * Maximum component height: 50 mm * Machine weight: 400 kg Ksdezqcmfopfx Akxenb * Supply voltage: 400 V / 50 Hz (3/N/PE) * Connected power: 10 kW * Average power consumption: 3.5 kW * Standby power consumption: 1.9 kW * Compressed air supply: 5 bar, oil-free compressed air * Media consumption: approx. 2.5 m³/h * Galden® filling volume: 20–25 kg * Heat-up time: approx. 25 min * Machine dimensions (L × W × H): 1,430 × 1,385 × 1,350 mm * Loading/unloading height: 920 ± 20 mm * Cooling: Air/convection, open or closed cooling water circuit possible

Year of construction: 2012, condition: ready for operation (used), Two identical Ekra stencil printers, both fully overhauled in 2026, are available. Year of manufacture: 2009/2012, overhaul: 2026/2026, min. printing area X/Y: 80mm/50mm, max. printing area X/Y: 508mm/508mm, substrate thickness range: 0.5mm-6mm, max. substrate weight: 2kg, min. stencil dimensions X/Y: 450mm/450mm, max. stencil dimensions X/Y: 740mm/740mm, repeat accuracy at 6 Sigma: +/-12.5µm, squeegee speed: 200mm/s, squeegee pressure: 10kN-250kN, snap-off min./max.: -1.5mm/6mm, separation distance: 0mm-3mm, separation speed: 100mm/s, transport height range: 830mm-950mm, machine dimensions X/Y/Z: approx. 1150mm/1900mm/1550mm, weight: approx. 750kg. Including operator computer, steel squeegees, accessories, EVA Vision System and automatic stencil cleaner. Documentation available. On-site inspection is possible. Kodpjzmyk Tjfx Akxsnb

Year of construction: 2016, condition: used, 2 coneyors available vintage 2012 and 2016. Used however operational! Knsdpfszlp H Iox Akxjb

Year of construction: 2012, operating hours: 34,463 h, condition: used, Yamaha stencil printer Kjdpfx Asudk Dkskxonb

Year of construction: 2011, condition: ready for operation (used), Offered is a fully automatic EKRA screen and stencil printing system. Max. print format X/Y: 508mm/508mm, min. print format X/Y: 80mm/50mm, max. frame size X/Y: 740mm/740mm, substrate thickness range: 0.5mm-6mm, max. squeegee speed: 200mm/s, squeegee pressure range: 10N-250N, repeatability: +/-12.5µm, 6 Sigma, cycle time: 8s + printing time. Including solder paste height inspection, 2.5D SPI and fixtures for VarioGrid support bars as well as iPAG dispensing system. The machine was serviced in April 2025. Machine dimensions X/Y/Z: approx. 1140mm/1866mm/1503mm, weight: 980kg. Documentation available. Inspection possible by appointment. Kedpeztrbqofx Akxjnb

Year of construction: 2015, condition: good (used), ASYS TRM01 with excavation * Dimensions (L × W × H): 530 × 800 × 1,205 mm * Transport height: 950 mm * Fixed stop: 145 mm * 1 belt segment, belt length 530 mm * PCB size: 70–460 × 50–460 mm * PCB support: 3 mm * SMEMA infeed and outfeed * Mains connection: 230 V / 50 Hz * Power consumption: 0.75 kW * Pneumatics: 5 bar, air consumption 3–8 l/min English ASYS TRM01 PCB Lift Station * Dimensions (L × W × H): 530 × 800 × 1,205 mm * Transport height: 950 mm * Fixed stop: 145 mm * 1 conveyor segment, conveyor length 530 mm * PCB size: 70–460 × 50–460 mm * PCB edge support: 3 mm * SMEMA infeed and outfeed Kjdpfxezqbnhe Akxonb * Power supply: 230 V / 50 Hz * Power consumption: 0.75 kW * Pneumatic supply: 5 bar, air consumption 3–8 l/min

Year of construction: 2018, condition: good (used), ASYS TDM 06 * Year of manufacture: 2018 * Dimensions (L × W × H): 1,590 × 1,000 × 950 mm * Transport height: 850 mm * Overall height including signal light: 2,050 mm * Weight: 235 kg Knjdpfx Akjzqbkvexeb * Passageway width: 790 mm * PCB size: 70–460 × 50–460 mm * PCB thickness: 0.8–4.5 mm * PCB weight: 0–3 kg * Maximum component height: ±40 mm * Power connection: 230 V / 50 Hz * Pneumatics: 6 bar supply pressure, 5 bar working pressure, oil-free compressed air * Sound pressure level: < 75 dB(A) * Complete documentation available

Condition: used, Coating machine SL-940 Knodpfxox Tgywo Akxsb Tools used: SC350 + SC400, BlueWave200 5 machines available. Year of manufacture: 2022 and 2023 Price starting from €33,000 Configuration available upon request.

Year of construction: 2017, condition: used, Inline thermal cure (TC) infrared and convection drying oven Knedpfezt I Rbsx Akxeb Operational condition

Year of construction: 2008, condition: good (used), Semi-automatic three-chamber SMD stencil cleaning system Daunquart Washbear Knedpfx Aszuvw Sokxjb max. stencil size 740x740mm

Year of construction: 2014, operating hours: 4,000 h, condition: used, Operational machine with low hours! Ask for additional information! Knedpfjy R Dc Djx Akxeb

Condition: used, UV-9 Oven 8 units available, manufactured in 2022 and 2023. Configuration: 6726613 UV-9 Oven 7262431 UV-9 Base model Kjdpfxjx Tg Hwe Akxsnb 7263582 Option: closed-loop top 7262797 Option: in-and-out shutter 7263074 Traffic control (board drop detection) 7263583 Board counter 7263584 Board jam detection (entry and exit) 7264524 Automatic width adjustment for conveyors Price starting from €19,000.

Condition: like new (used), Year of construction: 2007, operating hours: 300 h, functionality: fully functional, machine/vehicle number: PSW-L, Used in very good condition, only 300 operating hours, 3 pallets included, documentation included Kjdpfx Aksu A Ddwexsnb

Year of construction: 2015, condition: used, Comes with transport conveyor system + Rohs solder (350kg). Ask for additional information! Kedey Uwdiepfx Akxjnb

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, A gantry system for automated loading or transport of heavy parts is for sale. This gantry system can be used for various loading applications (milling machines, lathes, paint lines, welding units, etc.). X travel – 11.6 meters, Y travel – 2.38 meters, Z travel – 2.5 meters. Kedpswdnb Defx Akxjnb All axes are driven by SEW servo motors. Servo-driven single gripper for parts up to 500 kg. Control cabinet – PLC control – Siemens S7-1500 and SEW drives. The gantry system can be inspected by appointment in Overath.

Condition: used, The line consists of one Juki KE-3020L pick-and-place machine, one Juki FX-3 pick-and-place machine, one Kurtz Ersa HOTFLOW 2/12 reflow soldering oven and one Kurtz Ersa stencil printer, 1) Juki KE-3020L pick-and-place machine, 2) Juki FX-3 pick-and-place machine, placement speed - optimum: 0.049s/chip (74,000CPH), placement speed - IPC9850: 60,000CPH, component size: to 33.5mm (or diagonal length up to 47mm), placement accuracy: +/-0.05mm (Cpk ≥ 1), max. feeder inputs: 120 with 8mm tape feeders, max. PCB size: 50-410x50-360mm, length: 1650mm, width: 2650mm, height: 1530mm, weight: 3.28t, 3) Kurtz Ersa HOTFLOW 2/12 reflow soldering oven, conveyor system working width: 50-500mm, working width with PCB center support: 60-500mm, PCB clearance: +35/-20mm, conveyor speed: 20-200cm/min, conveyor height above floor: 820-950mm, pin and chain conveyor: 5mm edge clearance, cooling zone: water recooling system, 2 upper cooling modules, cooling medium: water / air, ambient temperature: 10-35°C, process length: 2450mm, heating zone: 1650mm, cooling zone: 800mm, inlet zone: 700mm, outlet zone: 700mm, process chamber width: 700mm, length: 3890mm, width: 1390mm, height: 1370-1500mm, weight: 1.4t, 4) Kurtz Ersa stencil printer. An on-site inspection is possible. Knjdpfxjzwfrwe Akxsb

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: AU170124-01, APPLICATION AREA UP TO NOW: Kedpsytphijfx Akxsnb Positioning/handling of panels from L/W/H 1500mm x 1500mm x 12mm up to L/W/H 8000mm x 2500mm x 80mm EQUIPMENT: Traveling gantry with synchronized drive Vacuum lifter beam with automatically switchable suction rows, adjustable based on the respective workpiece length Schmalz vacuum generator with area suction grippers Clamp cartridges next to the suction cups ensure vacuum activation Z-lift of the suction spider via scissor guides Z-axis asynchronous motor, MoviDrive frequency converter, belt drive Interfaces for upstream and downstream stations Control system: Siemens S7-300 CONTROL CABINET: Power supply, power, and control section with main switch, power supply unit, motor protection switches, automatic circuit breakers, power contactors, auxiliary contactors, Simatic S7-300 control system consisting of a CPU315F-2PN/DP, PN/PN coupler, 1 pc. Micro Memory Card, Ethernet interface, all necessary digital input and output modules, and terminals, fully wired. Fieldbus system: Profinet-Safe.

Year of construction: 2022, condition: ready for operation (used), A Mechatronika pick-and-place machine is available. Placement capacity: 1500/h, max. PCB dimensions X/Y: 300mm/400mm, component range: 0402 to 30mm/30mm, min. connection pitch: 0.5mm. Tape feeders: 8mm/12mm/16mm/24mm/32mm/44mm, max. number of 8mm tape feeders: 32, bar feeders: SO4 to PLCC84, component centering: optical (vision). Tool changer: 8, resolution X/Y: 5µm, angle resolution: 0.045°/step. Machine dimensions X/Y/Z without feeder: approx. 750mm/830mm/550mm, machine dimensions X/Y/Z with all attachments: 1700mm/1000mm/550mm, weight without feeder: approx. 70kg, operating hours: approx. 300h. Including base frame, computer unit, monitor, accessories and VS dosing unit for the fully automatic, program-controlled application of solder paste or adhesive from cartridges (5cm³/10cm³). Documentation available. On-site inspection is possible. Kodpfju Af Absx Akxsnb

Year of construction: 2010, condition: used, Operational unit! Knjdpfx Akozl Ardoxob

Year of construction: 2012, operating hours: 63,311 h, condition: used, functionality: fully functional, machine/vehicle number: Y27639, Fitter fully functional Kodpfxeudk A Hs Akxsnb

Year of construction: 2019, condition: ready for operation (used), Heads: 4, Feeder slots: 58, Positioning accuracy: +/-0.01mm, Production output: 6000CPH, Camera field of view X/Y at 20µm resolution: 48mm/40mm, Machine dimensions X/Y/Z: approx. 1000mm/760mm/600mm, Weight: approx. 100kg. Documentation available. On-site inspection is possible. Knsdpsuhqchefx Akxjb

Condition: used, Year of construction: 2015, Working condition reflow oven. Ksdpsx Tq I Sjfx Akxonb Ask for additional information!

Condition: used, Drying oven Seho GoReflow 1.8. 23101297679 unused 2023 price: €27,842 Knodpfx Aex Tg Rcokxsb 23101297680 unused 2023 price: €27,842 22081297330 used 2022 price: €14,182

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, For sale: Zeroclamp Zerobot 100P automation system, commissioned in 2015. (Perfectly suited for a Haas UMC 750, but also compatible with other machine types.) This automation system allows for either vice handling or raw part handling. Offers completely flexible configuration options. Large workpiece storage for many raw parts (fully customizable). Compact footprint. Features: * Various mounting plates for raw part handling * Raw part gripper * Second rack for increased part capacity * and much more Kedpfoyk D Dyjx Akxenb This solution enables both raw part and clamping device handling. There are numerous possible applications, and we are happy to provide advice.

Year of construction: 2009, condition: ready for operation (used), Industrial Pill etching machine from a printed circuit board manufacturing facility. Process stages: infeed section, etching chamber, replenisher, 4-stage cascade rinse, drying and outfeed section, max. working width: 650mm, PCB thickness: 0.1mm-3.2mm, conveyor speed: 0.5m/min-5.0m/min, max. process temperature: 55°C. Including a magnetic centrifugal pump for the etching chamber, one tank X/Y: 3500mm/2200mm and one Lantronic stacker. Machine dimensions X/Y/Z: approx. 3400mm/2000mm/1300mm. An on-site inspection is possible. Kodpfsznx Imjx Akxonb