Used mounting technology for sale (157)

Condition: used, UV-9 Oven Fsdpfex Tg Hwjx Am Ejgi 8 units available, manufactured in 2022 and 2023. Configuration: 6726613 UV-9 Oven 7262431 UV-9 Base model 7263582 Option: closed-loop top 7262797 Option: in-and-out shutter 7263074 Traffic control (board drop detection) 7263583 Board counter 7263584 Board jam detection (entry and exit) 7264524 Automatic width adjustment for conveyors Price starting from €19,000.

Condition: used, Year of construction: 1998, short loader Fgjdpfxjvvuu Ns Am Eji bar diameter 12-72 mm

Year of construction: 2011, condition: ready for operation (used), An inline SMT stencil printer/solder paste printer is offered. Print area X/Y: 50mm/40.5mm - 510mm/508.5mm, PCB thickness: 0.2mm - 6mm, board weight max.: approx. 1kg, print pressure range: 0 - 20kg, core cycle time: approx. 12s, machine alignment capability: greater 2Cpk at +/-12.5µm 6 Sigma, process/wet print accuracy: greater 2Cpk at +/-25µm 6 Sigma, installation space L/W/H: approx. 2060mm/1500mm/1570mm, machine weight: approx. 800kg. Inspection by arrangement possible. Fgodpfjylzhlox Am Eji

Condition: used, Year of construction: 2018, Operational condition machine. Available end of March. Fsdpfeyuv Hhox Am Esgi Ask for a quotation!

Year of construction: 2008, condition: ready for operation (used), Positioning resolution: 1µm, max. placement rate: 6000cp/h, max. feeder capacity: 310, min. PCB dimensions X/Y: 50mm/50mm, max. PCB dimensions X/Y: 780mm/600mm, PCB thickness range: 0.5mm-3.5mm. Documentation available. An on-site inspection is possible. Fgjdjymfcpspfx Am Esi

Year of construction: 2015, condition: used, Operational unit. Software M5.368-C5.368.IV769R09; Type of feeder used on the unit F1 and F3 3 feeder cart and 1 CTF-36C Cassette type Changeable Tray Feeder. Feeders not incuded. Approximate hours of work ~26 000; Maintenance and repairs performed Last repair 06.2023; No offline optimizer. Fgodpoy Alf Rsfx Am Eji Ask for additional details!

Year of construction: 2017, condition: ready for operation (used), Reflow oven in operational condition. Ask for additional information. Fedpfsw Hfp Rex Am Eegi Located within EU.

Condition: used, Felsomat gantry robot loading unit with Siemens PLC Swivel-arm loader, 4-axle, table buffer, blow-off station, intermediate storage, s shuttle, Fritz Werner TC 2.5K Rail length 1,500mm. Upright height 2,300mm. With transfer unit. Fsdjz Hzygjpfx Am Eegi

Year of construction: 2008, condition: ready for operation (used), An industrial Pill micro-etching machine for the micro-etching of printed circuit boards (PCBs) from a PCB manufacturing facility. is offered. Process steps: infeed, micro-etching, rinsing, drying and outfeed, max. working width: 650mm, PCB thickness range: 0.1mm-3.2mm, feed speed: 0.5m/min-3.5m/min, machine dimensions X/Y/Z: approx. 2600mm/1400mm/1300mm. Including a Dataco stacking unit. Documentation available. On-site inspection is possible. Fgsdpfxjznx Iae Am Eei

Condition: used, Year of construction: 2010, The machine has recently undergone service. Fgodpfx Aox Tv Rxsm Eoi Machine may need following repairs: A damaged guide rail clamping the PCB was observed. Transport belts are in poor condition. Mirrors in the camera module need to be cleaned before calibration. Software version Si 8.60 may require an update. Otherwise it is operational.

Condition: new, functionality: fully functional, Year of construction: 2022, overall weight: 150 kg, total height: 2,300 mm, total length: 1,200 mm, total width: 600 mm, load capacity per stand: 5 kg, working range: 400 mm, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg • Positioning accuracy ± 1mm • PLC control with operating and monitoring display • ESD equipment • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head • Autonomy time increase 1 stack • Machine safety: active door interlock • Low space requirement, due to compact design • Flexible adaptation to different machines, due to different interfaces • Low investment costs • Complete equipment • Stable design Fsdpfxexrgkwj Am Eegi • (solid steel construction, powder coated) • No machine adapters necessary • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar • Dimension: 1200 x 600 x 2300mm (LWH)

Year of construction: 1995, condition: ready for operation (used), A placement line with three (3) Zevatech/Juki placement machines, one (1) Zevatech/Juki tray changer and one (1) DEK screen printer is available. 1) 2x Zevatech/Juki FS730, year of manufacture: 1995, max. placement capacity: 3000/h, placement modules: 4, placement accuracy: +/-0.01mm, changeover time: 0.7s-1.1s. 2) Zevatech/Juki FM740, year of manufacture: 1997, max. placement capacity: 10000/h, placement accuracy: +/-0.05mm, board dimensions X/Y: 400mm/350mm, feeder inputs: 80/8mm, placement modules: 2. 3) Tray changer Zevatech/Juki TR4NEZ, year of manufacture: 1995. 4) SMD screen printer DEK 265, year of manufacture: 1995, printing process: Stencil printing, max. PCB size: 450mm/340mm, printing accuracy at 6 Sigma: +/-12.5µm, max. PCB thickness: 6mm, dimensions X/Y/Z: approx. 1400mm/1600mm/1500mm, weight: approx. 900kg. All machines are part of a complete system and are controlled by the same PC. On the screen printer, the front squeegee axis amplifier board is defective. Documentation available. Fjdpfx Amjtz Di Ne Eegi

Year of construction: 2016, condition: used, Ask for additional information! Fjdpfxjxy Sphs Am Esgi

Condition: like new (used), Year of construction: 2022, Ex demo unit. Like new condition. Ask for additional details! Fgedpfxsw Dtgrs Am Eji

Year of construction: 2012, condition: ready for operation (used), An i-Pulse SMD placement machine with IQ Vision, a subsidiary of Yamaha, is available. PCB thickness range: 0.4mm-4.8mm, min. PCB dimensions X/Y: 50mm/30mm, max. PCB dimensions X/Y: 1480mm/510mm, transport speed: 900mm/s, number of heads: 4, production output: 24000CPH. Placement accuracy CHIP: +/-0.04mm, placement accuracy IC: +/-0.025mm, placement angle: +/-180°, max. component size range: 0402-120mm/90mm, max. component height: 30mm. Machine dimensions X/Y/Z: approx. 1750mm/1750mm/1450mm, weight: approx. 1500kg. Including 3x feeder carriages and 2x tray feeders for installation in the machine. Documentation available. On-site inspection is possible. Fodpswf Nywefx Am Eegi

Year of construction: 1997, condition: ready for operation (used), A Dr. Fritsch segment soldering machine for the automatic soldering of segments (typically diamond segments) onto carrier tools is available. An on-site inspection is possible. Fodpfx Amex Ecuxj Ejgi

Condition: used, Year of construction: 2015, Operational machine - has been in use daily. Vacuum chamber has not been used for the past 1,5 years due to no need. Center support can only be adjusted manually. Machine location is EU. Fgjdpfexlqnysx Am Esi Ask for additional information!

Year of construction: 2009, condition: ready for operation (used), Resolution X/Y (3D and 2D): 21μm/10.5μm, illumination: multispectral, multidirectional, component clearance above/below PCB: 40mm/100mm, max. inspection speed: 50cm²/s, inspection range X/Y: 450mm/350mm. Dimensions X/Y/Z: approx. 1150mm/1150mm/1450mm, weight: approx. 500kg, software: OptiCon Pilot 5.3. Including calibration tool, instructions, camera, lighting and repair software for error visualization. Computer was replaced in 2012. Documentation available. Fodpfotz Dkyox Am Ejgi

Year of construction: 2004, condition: good (used), functionality: fully functional, Selling 1 Juki FX-1 and 2 Juki FX-2 from current production. Please contact me if you have any questions. Fgjdpfx Amevk R H Re Eei

Condition: used, The line consists of one Juki KE-2070 pick-and-place machine, one Juki KE-2080 pick-and-place machine, one Juki RS-800 reflow soldering oven and a cooling unit (chiller), 1) Juki KE-2070 pick-and-place machine, permissible component height SC: 6mm, NC: 12mm, PCB dimensions Medium: 330x250mm, Large: 410x360mm, Extra Large: 510x460mm, transport direction: right-to-left or left-to-right, transport height: 900mm +/-20mm, 950mm +/-20mm, 2) Juki KE-2080 pick-and-place machine, permissible component height NC: 12mm, HC: 20mm, EC: 25mm, PCB dimensions Medium: 330x250mm, Large: 410x360mm, Extra Large: 510x460mm, transport direction: right-to-left or left-to-right, transport height: 900mm +/-20mm, 950mm +/-20mm, 3) Juki RS-800 8-zone reflow soldering oven, number of heating zones: top 8, bottom 8, heating zone length: 3121mm, number of cooling zones: top 2, cooling zone length: 800mm, exhaust air volume: 10m³/min x2 exhaust connections, heat-up time: approx. 25min, temperature setting range: room temperature to 300°C, temperature control: closed-loop PID control + SSR, PCB width: 50-450mm, transport height: 950mm +/-20mm, transport speed: 300-2000mm/min, chain lubrication: automatic lubrication, cooling method: forced-air cooling, connected load: 64kW, power consumption during start-up: approx. 35kW, power consumption during normal operation: approx. 8.5kW, length: 5314mm, width: 1417mm, height: 1524mm, weight: 2.25t, 4) Cooling unit (chiller). An on-site inspection is possible. Fgsdpezwfrdofx Am Eji

Year of construction: 2014, condition: good (used), Machine in operational condition with following specification: Dual-stage 2 x HM Head 2 x ScanCamera 2 x MultiCamera 2 x Nozzle Station 4 x FES32 Fodpfx Ajvfpmlsm Esgi Traceability package Ask for additional information!

Year of construction: 2004, condition: ready for operation (used), An Mimot SMD placement machine is available. Infeed height: 888mm, max. component dimensions X/Y: 55mm/55mm, max. component height: 10mm, placement accuracy at Sigma 4: 35µm, repeatability at Sigma 4: 10µm, angular accuracy at Sigma 4: 0.07°, placement rate according to IPC: approx. 14400components/h, min. PCB dimensions X/Y: 50mm/500mm, max. PCB dimensions X/Y: 380mm/400mm, PCB thickness range: 0.5mm-4mm, maintenance: 02/2025. Machine dimensions X/Y: approx. 3100mm/1100mm, weight: approx. 1850kg. Including an extensive feeder package. Documentation available. An on-site inspection is possible. Fsdpfjzd Eicsx Am Esgi

Condition: like new (used), Automatic Cage Transfer System for Autoclaves Industrial automatic system for the transfer and handling of autoclave cages or baskets, designed for the movement of loads within automated lines for heat treatment, pasteurization, and sterilization. The equipment allows for the automation of the transfer of autoclave cages between the different stages of the process, reducing manual handling and facilitating a continuous and organized flow in the sterilization area. Primarily manufactured from stainless steel, it is designed for industrial food environments and can be integrated with autoclaves, cage loading and unloading systems, conveyors, and other automatic handling equipment. MAIN FEATURES -Type: Autoclave cage transfer system -Application: Automatic handling of cages/baskets -Automated industrial transfer system Fedpfjzwv Amsx Am Esgi -Robust construction in stainless steel -Automatic positioning and transfer of cages -Designed for sterilization and heat treatment lines -Suitable for continuous industrial operation -Integrable into existing autoclave installations -Compatible with automatic loading and unloading systems -Reduces the need for manual handling of cages APPLICATION The system is designed to automate the movement of cages used during the heat treatment, pasteurization, or sterilization of packaged food products. It can be part of an automatic autoclave line, transferring and positioning the cages between the different zones of the process. It can be integrated with: Industrial autoclaves Cage and basket handling systems Automatic loaders and unloaders Basket loading and unloading equipment Conveyors and transfer systems Accumulation systems Automatic sterilization lines APPLICATIONS A particularly interesting solution for canning industries, food processing plants, and industrial sterilization facilities that seek to automate the handling of autoclave cages. Suitable for production lines of cans, jars, pouches, trays, and other packaged products that require pasteurization or thermal sterilization in an autoclave. The system allows for improved automation and organization of the autoclave area, reducing manual intervention between the different stages of the process. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Year of construction: 2011, condition: excellent (used), Essemtec Pantera XV Pick-and-Place Machine Year of manufacture: 2011 Excellent condition From small-batch production 0201 components Fgodpfsyxc I Ujx Am Esi Top-down image processing Intelligent tape feeder (8 to 56 mm) Placement speed: 4,500 cph Easy-to-use graphical software Optical alignment “on the fly” Upward-vision system for component inspection Feeder package: 10 pieces 740i paper 8mm 30 pieces 740 blister 8mm 5 pieces 741 12mm 2 pieces 742i 16mm 10 pieces strip tape feeder

Year of construction: 2012, condition: used, Operational condition PCB cleaning unit. Several available. Ask for photos and pricing Fjdeyup Sdjpfx Am Ejgi