Year of construction: 2002, condition: excellent (used), JEWA Flexo Rotonir SM52: M.No.: 02010-0017 Kjdpfx Ajd Nd T Uegzefa BALDWIN: Typ: FK-1-500 // Serien No.: 151166 // Art.- No: 150.01.0001

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: n.n.b., color channels: 2, paper weight (min.): 40 g/m², paper width (min.): 100 mm, paper width (max.): 520 mm, paper height (min.): 900 mm, paper height (max.): 370 mm, total length: 2,700 mm, total width: 2,034 mm, total height: 1,720 mm, space requirement length: 3,700 mm, space requirement width: 3,000 mm, space requirement height: 2,220 mm, counter reading (black): 1,150, type of input current: AC, input current: 16 A, input voltage: 200,210,220 V, Equipment: documentation/manual, Hans Gronhi GH522 Purchased from the second owner, who had taken over the company from the first buyer. This second owner never reinstalled the machine in their print shop; it was stored in a corner for about four years. Recently, I acquired this machine together with some other equipment. To ensure the memory card and electronics were still functioning, I tested the machine with plain paper. All functions operated correctly: press on/off, photocells, and other controls. A video of the test run can be sent via WhatsApp or downloaded from my Dropbox. Unfortunately, Machineseeker does not allow me to share such links directly via their platform. If required, I will try to contact you via WhatsApp using your phone number. More photos with big data also available. Machine details: Type: Hans Gronhi GH522 Serial number: currently unclear (to be checked once in warehouse) Year of manufacture: 2010 (based on PCB markings, see photos) Delivered to first owner: March 2012 Total impressions: to be verified after arrival in warehouse (estimated under 15 million) Max. sheet size: 520 x 370 mm Min. sheet size: 148 x 100 mm Plate size: 520 x 370 mm Dimensions (L × W × H): 170 × 203 × 165 cm (including steps) Weight (incl. packing): approx. 4,200 kg Condition: To be dismantled coming week and then transported to our warehouse in Son en Breugel, The Netherlands (zip code 5692 CC). Very good and clean condition. Rubber rollers are mostly original, with approx. 50–60% life remaining. Mainly printed 2-colour jobs, so rollers have not been washed excessively. No damages on cylinders, gears, or bushes. Well maintained, never involved in accidents. Features: Stream feeder with suction belt feed board Mechanical and ultrasonic double-sheet detection Mechanical pull side lays Continuous monitoring at front lays Semi-automatic plate loading with pre-load facility Automated ink sweep with pre-inking facility Precision laser-cut segmented ink keys Automatic roller wash (programmable) Continuous dampening system with oscillating bridge roller and pre-damp facility Optional integrated or separated dampening during production Speed-compensated dampening Automated refrigeration/recirculation/dosing unit BEIERXIN (1 unit) Cylinder movement: circumferential, lateral, and diagonal Quick-release blanket clamping Touch screen controls Programmable pre-dampening cycle Powder spray unit with heated reservoir and vibration Three motorised suction slow-down devices Sheet de-curler Air shower in delivery Kfodpfx Agow R Enmozoa Central oil lubrication system Pneumatic controlled operation (small compressor included) Seperate stand alone PUNCHING unit included Packing & delivery: Machine will be professionally packed and strapped on a heavy duty pallet and additional equipment on EURO palletboxes Loaded on your transport Pricing & conditions: Fixed price: € 12,000 LOT (Loaded on Transport, Incoterms). Down payment: 20% (€ 2,400) as deposit. Proforma invoice: Deposit invoice valid for 5 working days. Please supply full company details to issue the invoice.

Condition: used, Year of construction: 2005, Offer includes: Heidelberger Printmaster 52-4, Year of manufacture 2005, Kodpfx Agjv U U A Rszofa Print count: approx. 143 million, Autoplate, Classic Center,

Condition: good (used), Year of construction: 2012, Heidelberg SX 74-5-P+L Year:2012 5 Color + coating unit Max size 530 x 740 mm Paper thickness 0.03 mm 15,000 sph 196 million impressions Prinect Press Center Wall screen Kfodpfx Agov H N Raozsa Easy control Autoplate Interface adapters Press Center master level Press Center instant gate Press Center wallscreen application Press Center color assistant pro Press Center net profiler Press Center drystar Guide plate Alcolor with Vario Damping Programmable blanket/roller/cylinder wash Technotrans alcocontrol IPA with conv. measuring Weko powder AP 110 Antistatic feeder and delivery 50Hz/400V Acoustic package Hydrostar damp. Air cooled High pile delivery In production

Condition: good (used), Year of construction: 1993, machine/vehicle number: 709661, Size 35 x 52 cm, Alcolor dampening, Technotrans cooling and recirculation unit, Weko T66 powderspray, Plus version Kjdpew Inu Refx Agzefa Machine no.: 709661

Condition: new, Year of construction: 2006, Dear Sirs, AS OWNER HEIDELBERG PM 74-2P age 2006 Approx. 66 mill. impressions Low pile delivery Size 520 x 740 mm Speed 12.000 copie/h Paper size max 520 x 740 mm Paper size min 280 x 400 mm Paper thickness 0,04-0,4 mm Print size max 510 x 720 mm Kodpfxoxq Npmo Agzofa Plate size 615 x 724 mm thickness 0,30 mm Blancket size 752 x 605 mm Dimensions: L. 3,8 mt. P. 2,7 mt. H. 2,2 mt. Power Kw 20 circa Weight 8.300 Kg. Conditions: Cylinders and gears without damages Alcolor continuous dampening with Technotrans's alcohol metering Auto wash Easy plate

Condition: excellent (used), machine/vehicle number: 3.278-870805-1, Part No.: 42.35.53 Ksdpfx Aeh Eii Togzjfa Technical data and description: see pictures

Condition: good (used), Year of construction: 1984, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 51510274, type of input current: three-phase, input current: 7 A, input voltage: 380 V, Equipment: documentation/manual, Machinenumber 51510274 Year of built 1984-85 Good condition, normal light-soiling Molleton dampening 2 mounting rings in NP unit NO numbering blocks included (zeiser equal to GTO, Fuji etc) Under power in our warehouse. To be delivered EXW van Rooij, loaded on your transport (LOT) Technical Data • Maximum sheet size: 381 × 520 mm • Minimum sheet size: 110 × 148 mm • Maximum printing area: 370 × 515 mm • Maximum printing speed: 10,000 iph Kfedpfxjt Etito Agzsa • Minimum printing speed: 3,000 iph • Feeder capacity: 940 mm • Delivery capacity: 420 mm • Stock range: 30 up to 350 g/m² • Maximum paper thickness: 0.4 mm Printing plate dimensions: 0.15 × 521 × 420 mm Blanket dimensions: 1.9 × 524 × 480 mm • Press drive motor — power: 1.5 kW • Air pump motor — power: 1.5 kW • Electric motor delivery raising: 370 W • Inching: 120 W Machine dimensions • Length: 2,200 mm • Width: 1,185 mm • Height: 1,570 mm • Machine weight: 1,550 kg

Condition: good (used), Offer consisting of: Heidelberg Speedmaster SM52-5P3, CP1.04, Autoplate, washing devices, 125 million impressions, perfecting unit operational!, immediately available Kodsw Ixtdspfx Agzjfa

Condition: excellent (used), Format (cm): 32x52 All existing tools will be included with the device for punching and perforating as well as holders of these tools (see pictures) Kjdpfx Ageh Eik Hozjfa

Condition: used, 4 ink trays with 22-channel control from Microcolor I unit remotely (off-press controls) Kfjdpev Nzrnjfx Agzea

Condition: excellent (used), Format (cm): 32x46 Kedjh Eikmopfx Agzsfa All existing tools will be included with the device for punching and perforating as well as holders of these tools (see pictures)

Condition: good (used), IR dryer for 28” (50x70 cm) paper and cardboard processing, for example in the delivery of a 28” offset machine Kfedpov Nzq Rofx Agzoa The lamp holder contains 18 lamps of 1kW; the frame in which everything is attached and soldered is liquid cooled, preferably with coolant, the warm air is treated by 2 blowers, one for supply of cool air and one for extraction of the warm air in case of paper stop or paper crash where the machine would stop with sheets in the delivery. The lamps are then switched off and hot air is forcibly extracted. Everything is clearly indicated in diagrams and that is all complete.

Year of construction: 1978, condition: excellent (used), machine/vehicle number: 664937N, Counter (m): 42 Kjdpfx Agegfb E Rozsfa Format (cm): 32x46 Dampening: Varn Kompac III Equipment / Additional information: with N&P (numbering & perforating) unit

Condition: ready for operation (used), Year of construction: 1989, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: 20216035, color channels: 2 kleuren met keertrommel ook 1/1, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 102 mm, paper height (max.): 360 mm, total length: 2,800 mm, total width: 1,250 mm, total height: 1,690 mm, space requirement length: 2,800 mm, space requirement width: 1,250 mm, space requirement height: 1,690 mm, counter reading (black): 11,500,000, type of input current: three-phase, input current: 16 A, input voltage: 200 V, Equipment: documentation/manual, In exceptionally good and original condition, only 11.5 million prints (!) High-quality "heavy duty" B3 (35x50cm) 2-colour offset machine for high-quality streak-free printing due to typical constructive qualities; The turning device is in excellent condition. Cast-on dense molecular cast iron axles with affinity for oil (pressure lubrication) run in RG12 cast bronze 12 bearings, very durable and very good sliding properties. As a result, these machines print beautiful surfaces and halftones without the notorious shock stripe. Kfsdpjv Nwgnofx Agzea We have had a lot of experience with this brand and this machine type in particular since 1991 and can deliver all parts from stock to our customers. For the complete specification see the PDF files at the bottom of this advertisement page. If desired, this machine can be completed with an impression, numbering and perforating unit installed by us (foldable) for an additional charge of € 1500,-- (optional) Some specs: Maximum production speed 11,000 sheets/hour with clean and weather printing 9,000 sheets/hour Paper size: minimum 148x105mm, maximum 520 x 360mm Maximum printing surface 500 x350mm Plate size 510 x 410 to 420 mm Paper thickness 0.04 to 0.4 mm 4 ink plate rollers and 2 damp plate rollers (molton dampening) Staffing insert Height of the stack in the insert 900 mm Height of the stack in the delivery 450 mm Chain delivery with 3 gripper bars with hardened gripper tips and carbide coated gripper seats (also with pressure cylinder) Power consumption 4.75 kW Built-in circulation pump and water tank for damp work Dimensions L x W x H = 2800 x 1250 x 1690 mm Net weight 3,560 kg Machine is supplied with oil drip plate Input voltage is 3 x 200/220/230 VAC or via the supplied transformer 3 x 380/400/415 VAC

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 701 235, Counter: 54,356,348 Ksdpfovcxxxex Agzsfa Format (cm): 36x52 Dampening: Stenz-Dampening-System

Condition: used, functionality: fully functional, color channels: 2 kleuren rechtdoor, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 100 mm, paper height (max.): 365 mm, total length: 2,765 mm, total width: 1,523 mm, total height: 1,560 mm, space requirement length: 2,765 mm, space requirement width: 1,523 mm, space requirement height: 1,560 mm, type of input current: three-phase, input current: 20 A, input voltage: 200 V, Equipment: documentation/manual, 2-colour offset press in high-quality construction with hardened and ground gears, cylinders run in class P5 pre-stressed conical roller bearings (sets of 2) and lubricated in oil bath and pressure lubrication. B3 format (35x50 cm) in conventional standard design (no autoplate and/or cocking) but alcohol film dampening with large rollers according to SM52 construction, prints very nicely Originating from 1st owner who did not maintain the machine properly (visually); an extensive maintenance history has been carried out by the importer. The last counter reading in the history is 11.6 Mln from 2003. Due to illness and outsourcing, the previous owner, a printing broker, has hardly used the machine since then. We will check the machine on the current counter reading and ensure correct and proper operation. C)2 dry ice cleaning is still being considered as well as overhauling the entire machine, because the mechanical condition is exceptionally good. This is however cost increasing so the machine is now offered for the cheapest option, that is "as it is", EXW our warehouse in Son, NL. Any type of inspection is of course allowed. We guarantee the machine as free from breakage, cylinder damage and/or repair and damage free to gears. The rubber rollers are vitrified and need to be replaced. The Royce ECO circulation and cooling installation for the dampening work shows signs of corrosion. Some specs, for all specs open the PDF at the bottom of this page. Kfsdjv Nv Taopfx Agzsa Maximum printing speed 12,000 sheets per hour Maximum paper size 365 x 520 mm Minimum paper size 100 x 148 mm or 148 x 100 mm Maximum printing surface 350 x 510 mm Rubber cloth size 500 x 520 x 1.9 mm Plate size 400 - 410 x 510 mm Dampening rollers in this case of film dampening is 1 (62mm) Number of ink feed rollers 4 pieces of 46, 48, 52 and 54 mm Inlay stack height maximum 850 mm Explanation stack height max 360 mm Electrical connection 3 phases 200 VAC 50HZ (primary) but there is a transformer for conversion from 3 x 415/400/380/230 VAC to 200VAC Power consumption in total 7kW Primary fuse in any case 20A Dimensions LxWxH = 2765 x 1523 x 1560 mm Net weight 4000 kg

Year of construction: 1982, condition: excellent (used), machine/vehicle number: 676411N, WITH N&P UNIT (numbering & perforating) Kfsdsivz E Tjpfx Agzea Counter (m): 45 Format (cm): 32x46 Dampening: Varn Kompac III Equipment / Additional information: with N&P (numbering & perforating) unit Bacher control 5000

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, machine/vehicle number: 6F070, total length: 1,800 mm, total width: 1,150 mm, total height: 1,600 mm, type of input current: three-phase, input voltage: 200 V, power: 3 kW (4.08 HP), overall weight: 1,400 kg, Equipment: documentation/manual, 1978 very original in excellent condition one color offset machine from the Japanese Sakurai with never used Number Perforating and Impression unit (sprayed in tectyl and deliberately not cleaned by us) is really for that time, compared to other makes incl Heideleberg's GTO46 a top class machine. Very nice and solid machine. Kfodpfx Asuga U Dogzoa Paper size 32 x 49 cm working with the same size plates as at that time the Rotaprint broadened models as well as Romayor and Fuji 50. The condition is so fine that it would almost be allowed in the reception room of the manufacturer. All documentation is included, electrical schematics are complete with legend and parts book belongs to this machine.

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 1139, Print counter (m): 66,6 Power: 15.000 sheets/hour Format (mm): Max. Paper Size: 520 x 375 mm // Min. Paper Size: 100 x 105 mm Ksdpfx Agevcxwzjzefa Max. Printing Area: 505 x 350 mm Paper Thickness: 0,04 – 0,6 mm Dampening preparation: technotrans alpha.d Powder device: Grafix

Condition: excellent (used), Year of construction: 1988, functionality: limited functionality, machine/vehicle number: 25.05.004, total length: 9,500 mm, total width: 2,250 mm, total height: 2,300 mm, input voltage: 380 V, power: 50 kW (67.98 HP), overall weight: 21,000 kg, empty load weight: 18,000 kg, compressed air connection: 7 bar, Equipment: documentation/manual, Paper size: 730 x 1060 mm, printing area: 710 x 1040 mm Paper thickness: 0.05 mm – 0.5 mm Preset maximum speed (due to simulation of the throw-off time for high-speed presses) is 4,000 sheets per hour, but the machine can operate much faster for commercial jobs. Four-fold central impression cylinder that prints all 4 colors in one gripper closure. 1988 FAG Speedproof with operator console for ink duct and cylinder adjustments, enabling extremely accurate register printing. Attached is the original factory brochure. The machine has been fully dry ice cleaned, and the cylinders are in excellent condition. Offered strictly on an 'as is, where is' basis. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Price is absolutely fixed, based on the removal of easily separated parts which we could sell separately, such as the Mabeg feeder with vacuum belt delivery, and the four-fold Baldwin stainless steel unit—with each color having its own bath, a mixer, and adjustable temperature control, so all four baths can be set to different temperatures and alcohol concentrations. The machine was dry ice cleaned, and it was intended for prominent use in printing electronic paper. However, due to too many initial losses, the project was discontinued. The machine has been with us for 3 years and, due to its size, I want to sell it as quickly as possible. Hence this very low price. It is an excellent machine. If the machine needs to be set up for testing and sampling, this is possible at an additional cost of €10,000, of which €5,000 must be paid in advance as a deposit under agreed conditions. All relevant information can be found in the original FAG folder for the machine, available via this advertisement as a PDF. Technical Data - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) - Speed max.: 4,000 sheets/h - Floor space requirement (incl. access to feeder, delivery, and central control desk): 950 × 525 cm (374 × 206.69 in.) - Press height: 230 cm (90.55 in.) - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lbs) - Total power requirements: approx. 50 kW Kjdpouf Sy Aofx Agzsfa - Compressed air supply: 6 – 7 bar

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 16035, Format (mm): 229x162 Max. Speed: 560 pcs / min. Paper weight (g / m2): 90 Counter : 53000 /h Performance data // Technical data The specified values are listed as the machine-technical performances using original W + D format parts and components. The achievable performance in practice depends on various parameters beyond our control, e.g. on the characteristics of the materials to be processed, the product and blank shape, window size and position of the windows, feed direction, position and type of the closure flap, as well as the print motif and printing ink. STANDARD The machine is used to print on both sides of pre-made envelopes and mailers with conventional offset printing inks. The printing units are arranged in satellite form around a central counterpressure cylinder. Power: Perfecting: perfecting: Max. 1200 envelopes per minute for papers according to DIN 6733 with a surface mass of 60-165 g / m2 for format heights up to 162 mm in double use Max. 700 envelopes per minute for papers according to DIN 6733 with a surface mass of 60-165 g / m2 for format heights up to 162 mm in single use Kodpjh Icf Usfx Agzofa Max. 500 envelopes per minute for papers according to DIN 6733 with a surface mass of 60-165 g / m2 for format heights up to 229 mm in single use Max. 700 envelopes per minute for papers according to DIN 6733 with a surface mass of 60-165 g / m2 For format heights up to 180 mm in single use

Condition: good (used), Year of construction: 1989, 2-color "straight" offset machine with low-stack explanation; 48x66cm, last modified type of this model (= best) Kjdstyqhqepfx Agzjfa

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: GS000506, Counter: 26‘795‘055 Speed: 13000 Sheets / h Format: Sheet format max. 370 x 520 mm // min.: 105 x 145 mm Print format max: 360 x 520 mm Thickness: max. 0,4 mm Dampening: Alcolor dampening systems with Baldwin BC 713 EF cooling device Powder device: Alphatronic 200 Equipment / further information Kedpfxevw Ai Ro Agzofa Ultrasonic double sheet control Heidelberg EasyPlate plate clamping device with automatic plate cylinder positioning for quick plate changes with just one tool. Blanket cylinder with central clamping screw for tensioning at the front and rear edges Automatic blanket and impression cylinder washing device (for normal colors) suitable for conventional and vegetable oil-based washing agents, program-controlled via the control system.

Condition: ready for operation (used), Year of construction: 1990, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: 0651044, color channels: 1 kleur, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 105 mm, paper height (max.): 360 mm, space requirement length: 1,800 mm, space requirement width: 1,290 mm, space requirement height: 1,650 mm, counter reading (black): 13,084,844, type of input current: three-phase, input current: 16 A, input voltage: 220 V, Equipment: documentation/manual, In exceptionally good and original condition, only 13 million prints (!) High-quality "heavy duty" B3 (35x50cm) 1-colour offset machine for high-quality streak-free printing due to typical constructive qualities; Cast-on dense molecular cast iron axles with affinity for oil (pressure lubrication) run in RG12 cast bronze 12 bearings, very durable and very good sliding properties. As a result, these machines print beautiful surfaces and halftones without the notorious shock stripe. We have had a lot of experience with this brand and this machine type in particular since 1991 and can deliver all parts from stock to our customers. For the complete specification see the PDF files at the bottom of this advertisement page. If desired, this machine can be completed with an impression, numbering and perforating unit installed by us (foldable) for an additional charge of € 1500,-- (optional) Some specs: Maximum production speed 11,000 sheets/hour Paper size: minimum 148x105mm, maximum 520 x 360mm Maximum printing surface 500 x350mm Plate size 510 x 410 to 420 mm Paper thickness 0.04 to 0.4 mm 4 ink plate rollers and 2 damp plate rollers (molton dampening) Staffing insert Height of the stack in the insert 900 mm Height of the stack in the delivery 450 mm Chain delivery with 3 gripper bars with hardened gripper tips and carbide coated gripper seats (also with pressure cylinder) Power consumption 3.2kW Built-in circulation pump and water tank for the damp work Kodjv Nv Svopfx Agzjfa Dimensions L x W x H = 1800 x 1290 x 1650 mm Net weight 1,960 kg Machine is supplied with oil drip plate Input voltage is 3 x 200/220 VAC, no transformer included