Used Other waste management & recycling machinery for sale (124)

Year of construction: 1997, Condition: ready for operation (used), With conveyor belt, blower, shredder, screw, drum and screen. Dusbsipv D As Hcawmot

Year of construction: 2023, operating hours: 50 h, Condition: new, machine/vehicle number: 1940051-01-01, Functional Description: This forward-looking rotor bucket ensures quick and clean transfer of compost and other bulk materials. The material is picked up in the same way as with a conventional wheel loader shovel. At the discharge point, the rotor is started by means of the automatic control. The hydraulic rear wall pushes the material evenly to the rotor depending on the rotor speed. The counter-rotating rotor mills off the bucket contents, mixing it well and discharging it loosely. Optimum conditions are thus created for the composting process. Lumps and compaction are reliably broken up and a well-mixed bulk material is produced. Djb Hcasfl Hz Tswmeut

Year of construction: 2017, Condition: used, waste oil collecting tank . filling capacity 1000 Liter . with level indicator . Dsb Hcaoii Sgnjwmsut +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 2024, Condition: as good as new (ex-display), Grinder / Granulator / Separator. Complete electric cable recycling line. New and in stock. Djb Hcjvm Ar Rsawmjut Equipped with a shredder, a separator, a vibrating table and a magnetic table for iron, this machine recycles your cables and guarantees you the purest raw material. Europe's best value for money. Contact us for more information, photos and videos.

Condition: good (used), For sale: complete container washing installation suitable for Kliko and DIN roll containers. This installation consists of the following parts: -3 high pressure water pumps: - 2 pumps are intended for the container washing installation -1 pump is intended for the seperate spray lance including reel -2 hot water diesel heaters - A hydraulic generator that controls the tipper and spray heads Dueb Hcju Sqpfjawmot The container washing installation is available from the beginning of December 2024

Year of construction: 2000, operating hours: 100 h, Condition: good (used), Functionality: fully functional, machine/vehicle number: 3114, Sieve previously used very sparingly for sieving wood powder Dusb Hcaouf A S Aewmet

Year of construction: 2016, Condition: ready for operation (used), Pressing force: 50t, opening dimensions: 870x1500mm, bale dimensions: 1500x1100x1100mm, bale weight: 450kg, length: 1524mm, width: 2100mm, height: 3217mm, weight: 1.93t, operational hours counter: 18h. Duob Hcaweirakgomst

Year of construction: 2005, Condition: defective spare-parts repository (used), Functionality: not functional, machine/vehicle number: 1030 425 05, The machine was taken out of service about 4 years ago because the "small" milling rotor stopped. Hydraulic damage was suspected. The Cummins diesel engine QSC is running and the machine is ready to go. As the rotor unit is badly worn, it is too much work for us to repair the machine. The machine can be viewed by appointment. Dob Hcawjtyirhemjut

Year of construction: 2023, Condition: new, Cable stripping machine,wire stripper G.R.S. 12 Cable stripper This true monster can cut up to an incredible 120 mm in diameter! With 380 volts and 3 kW, this device is really built for industrial use. The heavy 210 kg of weight are therefore absolutely neccessary and of course it stands on their own two feet. The criterion for this machine: Super flexible in use with cable thicknesses between 2 mm and 120 mm. Duobsi A Ixfe Hcawmot Technical data: Cutting speed: — Processing capacity: Ø 2 mm — Ø 120 mm Motor power: 3000 Watts Voltage: 380 Volt Weight: 210 Kg Dimensions in cm: 89 × 58 × 136

Year of construction: 2024, Condition: new, Professional stripping machine Stripper Stripper New machines in stock! You can easily strip ALL KINDS OF CABLES (hard plastic, underground, steel armored, lead, flexible, Alu....) FROM 3mm to 14cm, Double cut up to 9cm Robust, high-performance machine Three-phase connection Weight: 500kg Motor power: 4kw Dob Hjvm Aq Tecawmjut Dimensions: 1550x700x1350 Easy and pleasant to use Braked castors adjustable blade function Very easy to adjust guarantees maximum safety Motor features forward and reverse Minimum maintenance Cabinet design for storage Positive customer feedback Contact us for more information, photos, videos...

Condition: used, Big Bag filling station loading station filling machine Height adjustable from 1150-1800mm Total height +/- 3100mm Equipped with hydro-unit for lifting big bag Complete with weighing control (operation unknown, last calibration / inspection 05/2023) Duob Hceu Hk T Tjawmst Dimensions pallet 1200mm x 1150mm See our other advertisements VMA Wekerom

Year of construction: 2023, Condition: new, Functionality: fully functional, This machine, type KM13, cuts electrical cables from 20 to 120 mm in diameter. The different diameters are easily adjusted by turning the hand wheel up and down. The machine has a speed of 25 mtr/min. The dimensions are: length 600 mm, width 600 mm and height 1600 mm. The weight of this machine is about 200 kg. This machine is powered by a 380V-50HZ, 3KW electric motor with a gearbox cabinet. The cable is cut from 2 sides so the copper core falls out easily. Dob Hcawoq E Ti Homeut Spare parts such as blades, drive, bearings etc can also be supplied. If required we can also perform maintenance on these machines A machine that is ready to use and easy to operate. If you want to try it, please bring cable.

Year of construction: 2004, Condition: ready for operation (used), Connected load: 15.5kW, weight: 6.8t. Dusbjip D Rze Hcawmjt

Year of construction: 2023, operating hours: 0 h, Condition: new, machine/vehicle number: DACHS HP 2.5, The DACHS HP compost spreader is designed for mounting on a 3-point system (KAT II or KAT III) for tractors with a power of approx. 50-120 hp. The spreader is driven by the tractor PTO (540 rpm). The rotor then rotates at 180 rpm. For road transport, the machine can be swung up hydraulically. Dob Hcawsifn Dgsmjut

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: Modelle: 55/500; 75/800; 35/450, WiPa conveying blowers of type WRTG, in the models: 55/500; 75/800; 35/450. Deb Hcjuw Sbyjawmout These are used for the pneumatic conveying of shredded plastic material. Unlike the WTG conveyor fan, the WRTG conveyor fans are equipped with a belt drive that transfers the motor drive line to the impeller. The type WRTG is used, for example, in washing systems in which moist materials are to be transported pneumatically. As the drive unit is separated from the impeller by a belt drive, no water can penetrate the motor. The bearing unit of the impeller is protected against the ingress of water and dirt. A generously dimensioned maintenance door makes cleaning and maintenance work very easy. Also available as a wear-protected version. -- AVAILABLE IMMEDIATELY-- SUBJECT TO PRIOR SALE -- THE PICTURE IS AN EXAMPLE REPRESENTATION --

Year of construction: 2021, Condition: new, The container scale from WeDi GmbH is used to record the degree of filling of roll-off containers. It consists of 2 drive-on ramps 1000 mm x 400 mm x 160 mm made of steel plates 10 mm thick, incl. end stop with stiffening plates and struts, as well as lateral centering rail and fixing holes. 1 piece weighing beam 100 mm x 100 mm, length 2.300 mm, design as U-profile, 10 mm thick, with holes for fixing the load cells. 1 piece weighing beam 100 mm x 100 mm x 1.400 mm length, design as U-profile, 10 mm thickness, with holes for the fixing of the load cells, incl. support plate made of 10 mm steel, stiffening plates made of 10 mm steel plates and 20 mm x 20 mm square steel for the lateral guidance of the weighing beam. For weight recording serves 1 pcs. load cell kit BKSB 15000 weighing range 15000 kg, readability 2 kg with 4 x load cells K30S 5000 with distance plates, 4 load feet, 1 clamp and trim box JBB-04 and 10 m scale cable to display electronics. As weighing electronics serves a scale electronics BWI, illuminated 50 mm large display, dimension 250 x 160 x 60 mm. In high-quality, flat plastic housing, user-friendly operation. Basic functions: Tare, Zero, Large/Net. The container scale is programmed after assembly by us to zero = empty cat 3 container empty weight. The power supply is 220 Volt. Price: 5.620 € plus VAT. Duebjgyph Ao Hcawmet

Year of construction: 2015, operating hours: 146 h, Condition: as good as new (ex-display), Functionality: fully functional, machine/vehicle number: W09BA7202FKB13218, The BAGELA asphalt recycler is an innovative solution for reusing asphalt crust or milled material. This self-contained piece of equipment enables considerable savings to be made on maintenance work, as well as on hot-mix asphalt laying (paths, roads, parking lots, potholes, pavement repairs, trench filling, etc.). Continuous production of high-quality recycled asphalt. Dob Hcasvdqfmswmjut

Year of construction: 2022, Condition: new, With the patented REMAV light-weight separator LA1200, they turn highly polluted building rubble or ballast into recyclable material in the blink of an eye! It separates the lightweight materials such as plastic, polystyrene, lightweight concrete or wood from the building rubble stone or concrete. The light weight separator can be integrated easily into any existing recycling plant. Djb Hsdzk Akjcawmout Due to the compact dimensions of the system, the screen trestle is easy to transport and can be loaded by wheel loaders with a bucket width of up to 2.70m.Integrated forklift shoes and lifting eyes ensure easy loading of the sieve box. The low task height of only 2.10m also makes it possible to load smaller wheel loaders. The basic machine is designed as single decker, but can be extended for fine screening up to 6mm at any time by means of retractable Unterdeckelemeten. This gives the option to separate the feed into 3 fractions. The sieve system is electrically powered and only needs 2KW/h.

Year of construction: 2024, Condition: new, cable shredder,cable granulator Technical specifications Shredder power 380 V 4 KW Total power 5.18kW Range 0 - 30mm Djb Hcsi Da R Hsawmjut Weight 515KG Cable processing approx. 30-50 kg/h

Year of construction: 2022, Condition: new, Functionality: fully functional, full tire retreading line as new Dueb Hcawevktu Dsmst

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: Modelle: 55/500; 75/800; 35/450, WiPa conveying blowers of type WTG, size: 55/500; 75/800; 35/450. These are the standard for pneumatic conveying in the plastics recycling industry. The material is sucked in by the blower, accelerated by the impeller and conveyed into the pipeline. The motor is bolted directly to the housing wall and picks up the impeller via the motor shaft. A generously dimensioned maintenance door makes cleaning and maintenance work very easy. Also available as a wear-optimized version Dsb Hcaweuw Sbgsmeut -- AVAILABLE IMMEDIATELY-- SUBJECT TO PRIOR SALE -- THE PICTURE IS AN EXAMPLE ILLUSTRATION --

Year of construction: 2014, operating hours: 4,000 h, Condition: excellent (used), machine/vehicle number: 1009, COMPOST TURNER Dusb Hcslu E Hxsawmet

Year of construction: 2022, Condition: new, Wire stripping machine G.R.S. 5 This is the second model by G.R.S., what stands on its own feet. Compared to the G.R.S. 4 this model weighs about double, has 30% more power and requires 380V for operation. Technical Data: GRS 5 10mm - 90mm Dimensions: W / H / D 78 cm / 120 cm / 84 cm Weight: app. 220 Kg Cutting speed: 30 Meters p. Minute Dob Hcajhpcprjwmeut Engine: 380V / 3000W Stripping of cables with a cross section of 10 - 90 mm and an insulation thickness up to 20 mm.

Year of construction: 2017, operating hours: 35 h, Condition: as good as new (ex-display), machine/vehicle number: 1242, COMPOST TURNER Dob Hcaelu E Eajwmout